Engineering Commons^™

Engineering News, Summer 2015, School Of Engineering

Engineering News

No abstract provided.

A Geologic Play Book For Utica Shale Appalachian Basin Exploration, John Hickman, Cortland Eble, Ronald A. Riley, Matthew Erenpreiss, Kristin M. Carter, John A. Harper, Brian Dunst, Langhorne “Taury” Smith, Michele L. Cooney, Daniel Soeder, Garrecht Metzger, Jessica Moore, Michael E. Hohn, Susan Pool, John Saucer, Douglas G. Patchen

Appalachian Oil and Natural Gas Research Consortium

This “Geologic Play Book for Utica Shale Appalachian Basin Exploration” (hereafter referred to as the “Utica Shale Play Book Study” or simply “Study”) represents the results of a two-year research effort by workers in five different states with the financial support of fifteen oil and gas industry partners. The Study was made possible through a coordinated effort between the Appalachian Basin Oil & Natural Gas Research Consortium (AONGRC) and the West Virginia University Shale Research, Education, Policy and Economic Development Center.

Secure Transmission And Retrieval Of Images In Conjunction With Steganography Using Chaos In Nonlinear Acousto-Optic Feedback, Monish Ranjan Chatterjee, Fares S. Almehmadi

Electrical and Computer Engineering Faculty Publications

Digital images are encrypted onto a chaotic carrier in a Bragg cell under hybrid nonlinear feedback and secure data is embedded into the system via steganography. System robustness (with and without channel noise) is analyzed vis-a-vis information security.

Professional Competency Development In A Pbl Curriculum, Bart Johnson, Ron Ulseth

Integrated Engineering Department Publications

Substantial dialogue exists regarding the needs of the engineering profession and the changes in engineering education necessary to meet them. Important to this change is an increased emphasis on the professional competencies as identified by the Washington Accord and the ABET professional skills for engineering graduates and how to educate for them. This paper will explore the potential for a project based learning engineering curriculum model to meet this need. It will summarize a newly developed upper-division undergraduate project-based learning (PBL) engineering program in the U.S. engineering educational system and its approach to professional competency development. Based on the ABET …

Role Of The Dewetting Mechanism On Moisture Damage In Asphalt Pavements, Nibert Elijah Saltibus

Doctoral Dissertations

Moisture damage is a major form of pavement distress that causes state and federal highways to undergo high maintenance cost (Bhasin, 2006). According to Hicks et al., (2003), in a survey conducted by the Colorado Department of Transportation, mainly including US agencies (1 Canadian Province), 82% of these agencies required the use of anti-strip treatment (additives) to avert moisture damage. Additionally, 87% of these agencies test for moisture susceptibility. Despite extensive research performed on the moisture damage mechanisms in flexible pavements, it has been a challenge to obtain one single test that can comprehensively quantify the damage and to also …

Management And Analysis Of Multi Class Traffic In Single And Multi-Band Systems, Husnu S. Narman, Shohrab Hossain, Mohammed Atiquzzaman

Computer Sciences and Electrical Engineering Faculty Research

A recent trend in Internet usage has seen large amounts of multimedia data due to increasingly large numbers of mobile users. To facilitate higher bandwidth, modern mobile routers are capable of supporting simultaneous multi-band, leading to less interference, higher capacity and better reliability. However, there exists neither previous work that attempts to maximize utilization of available bandwidth in order to increase performance of multi-band mobile routers through the sharing of traffic classes among different frequency bands of the multi-band mobile router by scheduling, nor that shows multi-band routers are better than single band routers in realistic scenarios. In this paper, …

Engineering Ethics: Ontology And Politics, Eddie Conlon

Conference papers

"Ontology...acts as both gatekeeper and bouncer for methodology” (Archer 1995: 22). This exploratory paper, through a focus on the relationship between structure and agency, examines the underlying social ontologies informing the teaching, and researching of the teaching, of engineering ethics. It argues that current approaches are deficient and that Critical Realism can provide the basis for a more robust and inclusive research agenda for understanding engineering practice and the teaching of engineering ethics.

Creating A Data-Based Facebook Engagement Plan For Chabad At Binghamton, Justin Hayet

Capstone Projects 2015-Present

Core Capstone Question: How does Chabad at Binghamton maximize its online Facebook Engagement in a fashion which mirrors the needs of its diverse online stakeholders?

Schmalzbauer (2013) calculated that two thirds of America’s 400,000 Jewish college students attend schools with a Chabad chapter” (p. 120). Binghamton University’s student population is thirty percent Jewish, that is, 3,500 Jewish students (Hillel, 2014). Chabad at Binghamton’s seven full time staff members and student leadership of eighty-seven designated positions seek to engage all 3,500 of those students through weekly programs, Shabbat dinners, large scale programs and individual meetings. Chabad at Binghamton has been serving …

An Evaluation Of The Neighborhood Traffic Management Program Of Centennial, Colorado, Rolando Gabriel Melgoza

Civil and Environmental Engineering Master's Project Reports

Residential neighborhoods throughout the United States seek to maintain a quality of life where residents can live free of traffic factors adversely affecting their safety. Many communities have adopted a Neighborhood Traffic Management Program (NTMP) to address concerns over cut-through traffic, speeding, and safety. The City of Centennial, Colorado, incorporated in 2001, is a young city and has its own NTMP. Four traffic mitigation projects have been implemented. The objective of this research is to conduct a before and after comparison study of each Centennial NTMP project, to review the NTMP policies of American cities with similar suburban characteristics to …

Gold Nanoparticle Enhancements In Electroporation Mediated Dna And Rna Therapeutics, Shuyan Huang

Doctoral Dissertations

Nonviral gene delivery methods have been explored as the replacement of viral systems for their low toxicity and immunogenicity. However, they have yet to reach levels competitive to their viral counterparts. Electroporation figured prominently as an effective nonviral gene delivery approach for its balance on the transfection efficiency and cell viability, no restrictions of probe or cell type, and operation simplicity. The commercial electroporation systems have been widely adopted in the past two decades but still carry drawbacks associated with the high applied electric voltage, unsatisfied delivery efficiency, and/or low cell viability. What we did was to improve electroporation performance …

Ceas E-News 07.2015, College Of Engineering And Applied Sciences

College of Engineering and Applied Sciences News

• Working With the Most Powerful Supercomputing Services in the World
• Ajay Gupta Elected as Vice-Chair of IEEE Computer Society Technical Activities Committee
• DENSO North American Foundation Awards WMU Solar and SAE Teams $50,000

Technical And Economic Assessment Of Perovskite Solar Cells For Large Scale Manufacturing, Amir A. Asif, Rajendra Singh, Githin F. Alapatt

Publications

In this paper, we have carried out detailed technical and economic assessment of perovskite solar cells for large scale manufacturing. For ultra-small area of the order of 0.1 cm², efficiency of 20% or so are reported. However, for area of 25 cm², the efficiency is about 10%. Based on the photovoltaic module manufacturing requirements of no constraint on the supply of raw materials, low variability of every key process and process-induced defects, low cost of manufacturing, prospects for further cost reduction in the future, green manufacturing, and long-term reliability, there are absolutely no prospects of manufacturing …

Interdisciplinary Modeling For Water-Related Issues Graduate Course, Laurel Saito, Alexander Fernald, Timothy Link

All ECSTATIC Materials

The science and management of aquatic ecosystems is inherently interdisciplinary, with issues associated with hydrology, atmospheric science, water quality, geochemistry, sociology, economics, environmental science, and ecology. Addressing water resources issues in any one discipline invariably involves effects that concern other disciplines, and attempts to address one issue often have consequences that exacerbate existing issues or concerns, or create new ones (Jørgensen et al. 1992; Lackey et al. 1975; Straskraba 1994) due to the strongly interactive nature of key processes (Christensen et al. 1996). Thus, research and management of aquatic ecosystems must be interdisciplinary to be most effective, but such truly …

Biplanar Fluoroscopic Analysis Of In Vivo Hindfoot Kinematics During Ambulation, Janelle Ann Cross

Dissertations (1934 -)

The overall goal of this project was to develop and validate a biplanar fluoroscopic system and integrated software to assess hindfoot kinematics. Understanding the motion of the foot and ankle joints may lead to improved treatment methods in persons with foot and ankle pathologies. During gait analysis, skin markers are placed on the lower extremities, which are defined as four rigid-body segments with three joints representing the hip, knee and ankle. This method introduces gross assumptions on the foot and severely limits the analysis of in depth foot mechanics. Multi-segmental models have been developed, but are susceptible to skin motion …

Traction-Separation Relationships For Hydrogen-Induced Grain Boundary Embrittlement In Nickel Via Molecular Dynamics Simulations, Wesley Allen Barrows

Graduate Theses and Dissertations

The deleterious effects of atomic and molecular hydrogen on the mechanical properties of metals have long been observed. Although several theories exist describing the mechanisms by which hydrogen negatively influences the failure of materials, a consensus has yet to be reached regarding the exact mechanism or combination of mechanisms. Two mechanisms have gained support in explaining hydrogen’s degradative role in non-hydride forming metals: hydrogen-enhanced localized plasticity and hydrogen-enhanced decohesion. Yet, the interplay between these mechanisms and microstructure in metallic materials has not been explained. Accordingly, for this thesis, the three main objectives are: (i) to develop a numerical methodology to …

Alkali Silica Reaction Mitigation Using High Volume Class C Fly Ash, William Joseph Phillips

Graduate Theses and Dissertations

Alkali-Silica Reaction (ASR) is a neutralization reaction that occurs between an acid (silicic acid) and a basic pH pore solution (Calcium Oxide, Potassium Oxide, and Sodium Oxide). ASR causes deleterious expansion within concrete, which can cause durability issues decreasing the life span of concrete. ASR in concrete has been found in increasing quantities since its discovery in 1940 by Stanton. Several cases of ASR have occurred in Arkansas near Fayetteville, Pine Bluff, and Little Rock. The purpose of this research was to develop preventative measures using Class C fly ash in concrete, which contains the moderately reactive aggregates found in …

Swelling-Etching Characterization Of Copper (I) Oxide - Pdms For The Development Of Micro/Nano - Particles Composite Mems Corrosion Sensor, Abdoul Kader Maiga

Graduate Theses and Dissertations

The primary objective for this thesis is to contribute to the understanding of the oxide removal process for a corrosion sensing device. The goal for designing such a device is for monitoring corrosion on metallic structures. The sensing material (6.35mm x 1mm discs) of the device is composed of copper (I) oxide particles mixed in some polydimethylsiloxane (PDMS). The PDMS, “housing,” is meant for controlling the oxidation rate through the sensing material. A solvent was used to facilitate the etchant diffusion through the PDMS matrix. Toluene and acetic acid were the ideal solvent and etchant, respectively, for carrying out the …

Modeling Radiation Heat Transfer For Building’S Cooling And Heating Loads: Considering The Role Of Clear, Cloudy, And Dusty Conditions In Hot And Dry Climates, Salem Ahmed Algarni

Graduate Theses and Dissertations

The influence of transient factors such as sky long wave radiation exchange and atmospheric aerosols (i.e., smog, and dust – made up of sand, clay, and silt) are not carefully considered in current building design and simulation models. Therefore, the research objective was to better understand and account for such variables, resulting in improved radiative predictive capabilities, especially important for hot and dry climates under different sky conditions including clean, cloudy, and dusty. Overall, results of this dissertation provided a better prediction method for sky long wave radiation exchange with a building’s roof and the impact of dust accumulation on …

A Non-Invasive Fluorescence-Based Oxygen Sensor And Platform For Studying Cell Responses To Metabolic Agents In Real-Time, Koutilya Reddy Buchapudi

Doctoral Dissertations

A fluorescence-based sensor in a transverse flow/stop measurement platform has been developed to determine real-time changes in oxygen consumption rates for cell metabolic studies. The oxygen sensitive fluorophore platinum octaethylporphyrin was embedded in a cellulose acetate matrix and affixed to a fiber optic bundle, which provided for transmission of the excitation and emission wavelengths of the film. The fiber optic bundle was sealed in a sensor head that can be used in standard 24-well plates common to research labs. The utility of the sensor and sensing platform were determined by measuring the changes in oxygen consumption rates of Candida albicans …

Diamond Mems Biosensors: Development And Applications, Wenli Zhang

Doctoral Dissertations

This research focuses on the development a dielectrophoresis-enhanced microfluidic impedance biosensor (DEP-e-MIB) to enable fast response, real-time, label-free, and highly sensitive sensor for bacterial detection in clinical sample. The proposed design consists of application of dielectrophoresis (DEP) across a microfluidic channel to one of the impedance spectroscopy electrodes in order to improve the existent bacterial detection limits with impedance spectroscopy. In order to realize such a design, choice of electrode material with a wide electrochemical potential window for water is very important. Conventional electrode material, such as gold, are typically insulated for the application of DEP, and they fail when …

Should Charity Air Medical Organizations Require Commercial Certification Of Their Pilots?, Douglas Boyd, Charles Peters

Publications

Fixed-wing medical transportation crashes operating under 14CFRPart 91 show higher fatal outcomes than non-medical Part 91 flights. Advanced certification may translate into increased safety; yet we know of no charity aeromedical transportation requiring such certification. Herein, in a retrospective study, we determined (a) whether commercial certification is associated with a reduced fatality rate compared with the less stringent private pilot certificate and (b) accident causes.

“Rooming The Patient” Vs. “Moving The Patient", Susan L. Murray, Elizabeth A. Cudney

Engineering Management and Systems Engineering Faculty Research & Creative Works

Healthcare is coming under ever increasing scrutiny for cost, quality, safety, and patient satisfaction. This paper compares two operational models (“rooming the patience” vs. “moving the patient”) against productivity, privacy, user satisfaction, and other performance measurements. Varying risk factors for patient populations ranging from infants to geriatrics and medical specialties from mental health to orthopedics are addressed for both models. In the first operational model after checking-in the patient is escorted to an examination room and waits as various caregivers (nurses, doctors, clerks, etc.) come and go from the exam room. In the second model the caregivers work from a …

Monitoring The Progression Of Spontaneous Articular Cartilage Healing With Infrared Spectroscopy, Megan P. O'Brien, Madhuri Penmatsa, Uday Palukuru, Paul West, Xu Yang, Mathias P. G. Bostrom, Theresa Freeman, Nancy Pleshko

Publications and Research

Objective. Evaluation of early compositional changes in healing articular cartilage is critical for understanding tissue repair and for therapeutic decision-making. Fourier transform infrared imaging spectroscopy (FT-IRIS) can be used to assess the molecular composition of harvested repair tissue. Furthermore, use of an infrared fiber-optic probe (IFOP) has the potential for translation to a clinical setting to provide molecular information in situ. In the current study, we determined the feasibility of IFOP assessment of cartilage repair tissue in a rabbit model, and assessed correlations with gold-standard histology.

Design. Bilateral osteochondral defects were generated in mature white New Zealand rabbits, and …

Design And Evaluation Of An Energy-Absorbing, Reusable Roadside/Median Barrier, Scott Rosenbaugh, Ronald K. Faller, Robert W. Bielenberg, James C. Holloway, Karla A. Lechtenberg, Jennifer D. Schmidt, John D. Reid, Justice E. Kohtz

Nebraska Department of Transportation: Research Reports

No abstract provided.

Detecting Grain Flow Rate Using A Laser Scanner, Hossein Navid, Randal K. Taylor, Arzu Yazgi, Ning Wang, Yeyin Shi, Paul Weckler

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Detecting and measuring agricultural material flow is important in a wide range of applications in agricultural engineering, such as material handling, food processing, yield monitoring, and fertilizer spreading. In these applications, flow rate is determined by measuring material mass or volume as a function of time. Although different materials require detection, the methods for a given material type (e.g., granular) can be similar. Researchers have developed methods such as impact based sensors, radiometric-based sensors, and optical methods to detect and measure material flow. Abdul Rahim and Green (1998) studied an optical-fiber sensor (containing 32 light sources and 32 light detectors) …

First-Principles Studies Of Perovskite Compounds For Thermoelectric Applications, Penelope E. Ackerman, Lan Li (Mentor)

Idaho Conference on Undergraduate Research

Computational modeling techniques have been used to provide detailed insights into the structure-property relationships of materials. We have collaborated with the National Institute of Standards and Technology to develop various perovskite compounds with desired thermoelectric properties. We have used density functional theory-based approaches to study structural stability and electrical properties of R₂(FeCo)O₆ perovskite compounds (R = Pr, Nd, Sm, Eu and Gd), for which Fe and Co randomly occupy the B-site. Vienna ab-initio simulation package (VASP) has been performed to optimize geometry and structure. Superlattice and locally disordered phases have been compared through a total energy minimization …

Extraction And Characterization Of Cellulose Nanocrystals Produced By Acid Hydrolysis From Corn Husk, Piyaporn Kampeerapappun

Journal of Metals, Materials and Minerals

Corn husk is one of the agricultural residues represent abundant, inexpensive, and readily available source of renewable lignocellulosic biomass. Cellulose nanocrystals (CNCs) were extracted from corn husk by alkali and bleaching treatments followed by sulfuric acid hydrolysis treatment. The material obtained after each stage of the treatments was characterized. Morphological investigation was carried out using scanning electron microscope (SEM) and transmission electron microscopy (TEM). Fourier transform infrared (FTIR) spectroscopy showed the progressive removal of non-cellulosic materials. The crystallinity of corn husk and CNCs was also investigated using X-ray diffraction analysis (XRD). The highest crystallinity index value of this study is …

Dynamic Functional Connectivity Revealed By Resting-State Functional Near-Infrared Spectroscopy, Zhen Li, Hanli Liu, Jingping Xu, Wenli Liu, Fenghua Tian, Yong He, Haijing Niu, Xuhong Liao

Bioengineering Faculty Publications - Archive

No abstract provided.

Nanoformulation For Anticancer Drug Delivery: Enhanced Pharmacokinetics And Circulation, Gaurav Parekh

Doctoral Dissertations

In this study, we have explored the application of the Layer-by-Layer (LbL) assembly technique for improving injectable drug delivery systems of low soluble anticancer drugs (e.g. Camptothecin (CPT), Paclitaxel (PTX) or Doxorubicin (DOX)). For this study, a polyelectrolyte shell encapsulates different types of drug nanocores (e.g. soft core, nanomicelle or solid lipid nanocores).The low soluble drugs tend to crystallize and precipitate in an aqueous medium. This is the reason they cannot be injected and may have low concentrations and low circulation time in the blood. Even though these drugs when present in the cancer microenvironment have high anti-tumor inhibition, the …

Intrusion Detection System Of Industrial Control Networks Using Network Telemetry, Stanislav Ponomarev

Doctoral Dissertations

Industrial Control Systems (ICSs) are designed, implemented, and deployed in most major spheres of production, business, and entertainment. ICSs are commonly split into two subsystems - Programmable Logic Controllers (PLCs) and Supervisory Control And Data Acquisition (SCADA) systems - to achieve high safety, allow engineers to observe states of an ICS, and perform various configuration updates. Before wide adoption of the Internet, ICSs used "air-gap" security measures, where the ICS network was isolated from other networks, including the Internet, by a physical disconnect [1]. This level of security allowed ICS protocol designers to concentrate on the availability and safety of …