Engineering Commons^™

Practical Guidance For Integrating Data Management Into Long-Term Ecological Monitoring Projects, Robert D. Sutter, Susan Wainscott, John R. Boetsch, Craig Palmer, David J. Rugg

Library Faculty Research

Long-term monitoring and research projects are essential to understand ecological change and the effectiveness of management activities. An inherent characteristic of long-term projects is the need for consistent data collection over time, requiring rigorous attention to data management and quality assurance. Recent papers have provided broad recommendations for data management; however, practitioners need more detailed guidance and examples. We present general yet detailed guidance for the development of comprehensive, concise, and effective data management for monitoring projects. The guidance is presented as a graded approach, matching the scale of data management to the needs of the organization and the complexity …

On The Performance Of Sr And Fr Protocols For Ostbc Based Af-Mimo Relay System With Channel And Noise Correlations, Batu K. Chalise

Electrical and Computer Engineering Faculty Publications

This paper proposes selection relaying (SR) protocol for a cooperative multiple-input multiple-output (MIMO) relay system that consists of a direct link between a source and a destination. The system has only receive-side channel state information (CSI), spatially correlated MIMO channels, and the receiver nodes observe spatially correlated noise. The transmit nodes employ orthogonal space-time block codes (OSTBC), whereas the receiver nodes employ optimum minimum mean-square-error (MMSE) detection. The SR protocol, which transmits via the relay only when the direct link between the source and destination is in outage, is compared with the fixed relaying (FR) protocol which always uses the …

Ensemble Multi-Objective Biogeography-Based Optimization With Application To Automated Warehouse Scheduling, Haiping Ma, Shufei Su, Daniel J. Simon, Minrui Fei

Electrical and Computer Engineering Faculty Publications

This paper proposes an ensemble multi-objective biogeography-based optimization (EMBBO) algorithm, which is inspired by ensemble learning, to solve the automated warehouse scheduling problem. First, a real-world automated warehouse scheduling problem is formulated as a constrained multi-objective optimization problem. Then EMBBO is formulated as a combination of several multi-objective biogeography-based optimization (MBBO) algorithms, including vector evaluated biogeography-based optimization (VEBBO), non-dominated sorting biogeography-based optimization (NSBBO), and niched Pareto biogeography-based optimization (NPBBO). Performance is tested on a set of 10 unconstrained multi-objective benchmark functions and 10 constrained multi-objective benchmark functions from the 2009 Congress on Evolutionary Computation (CEC), and compared with single constituent …

Bending Behavior Of Carbon/Epoxy Composite Isobeam Structures, Brandon A. Asay

Theses and Dissertations

This research demonstrated the fabrication, flexural testing, and analysis of nominally 5 ft (1.5 m) 6-bay and 10 ft (3 m) 12-bay carbon/epoxy IsoBeam™ structures. The rectangular cross-section was 5 in (12.7 cm) wide by 10 in (25.4 cm) high. The IsoBeam structure is a composite lattice structure that is a geometric derivative of the IsoTruss® structure. Modifying the geometry to yield a rectangular cross-section provides additional applications for these beams as structural elements in buildings, aircraft, vehicles, and other structures. The diameters of the constituent members of the IsoBeam, namely the longitudinal and diagonal members, were sized such that …

Molecular View Modeling Of Atmospheric Organic Particulate Matter: Incorporating Molecular Structure And Co-Condensation Of Water, James F. Pankow, Marguerite Colasurdo Marks, Kelley C. Barsanti, Abdullah Mahmud, William E. Asher, Jingyi Li, Qi Ying, Shantanu H. Jathar, Michael J. Kleeman

Chemistry Faculty Publications and Presentations

Most urban and regional models used to predict levels of organic particulate matter (OPM) are based on fundamental equations for gas/particle partitioning, but make the highly simplifying, anonymized-view (AV) assumptions that OPM levels are not affected by either: a) the molecular. characteristics of the condensing organic compounds (other than simple volatility); or b) co-condensation of water as driven by non-zero relative humidity (RH) values. The simplifying assumptions have allowed parameterized chamber results for formation of secondary organic aerosol (SOA) (e.g., “two-product” (2p) coefficients) to be incorporated in chemical transport models. However, a return towards a less simplistic (and more computationally …

Contributions Of Mass And Bond Energy Difference And Interface Defects On Thermal Boundary Conductance, Nicholas A. Roberts, Changjin Choi

Mechanical and Aerospace Engineering Faculty Publications

The impact of mass and bond energy difference and interface defects on thermal boundary conductance (TBC) is investigated using non-equilibrium molecular dynamics (NEMD) with the Lennard-Jones (L-J) interatomic potential. Results show that the maximum TBC is achieved when the mass and bond energy of two dissimilar materials are matched, although the effective thermal conductivity is not necessarily a maximum due to the contributions of the thermal conductivity of the constituent materials. Mass and bond energy differences result in a mismatch between phonon dispersions, limiting high frequency phonon transport at the interface. This frequency mismatch is defined by a frequency ratio, …

Integrating Distributed Sources Of Information For Construction Cost Estimating Using Semantic Web And Semantic Web Service Technologies, Mehrdad Niknam, Saeed Karshenas

Civil and Environmental Engineering Faculty Research and Publications

A construction project requires collaboration of several organizations such as owner, designer, contractor, and material supplier organizations. These organizations need to exchange information to enhance their teamwork. Understanding the information received from other organizations requires specialized human resources. Construction cost estimating is one of the processes that requires information from several sources including a building information model (BIM) created by designers, estimating assembly and work item information maintained by contractors, and construction material cost data provided by material suppliers. Currently, it is not easy to integrate the information necessary for cost estimating over the Internet.

This paper discusses a new …

Designing Bus Transit Services For Routine Crowd Situations At Large Event Venues, Jianli Du, Shih-Fen Cheng, Hoong Chuin Lau

Research Collection School Of Computing and Information Systems

We are concerned with the routine crowd management problem after a major event at a known venue. Without properly design complementary transport services, such sudden crowd build-ups will overwhelm the existing infrastructure. In this paper, we introduce a novel flow-rate based model to model the dynamic movement of passengers over the transportation flow network. Based on this basic model, an integer linear programming model is proposed to solve the bus transit problem permanently. We validate our model against a real scenario in Singapore, where a newly constructed mega-stadium hosts various large events regularly. The results show that the proposed approach …

Project-Based Rf/Microwave Education, Richard L. Campbell, Branimir Pejcinovic

Electrical and Computer Engineering Faculty Publications and Presentations

Immediate application of learned fundamentals to laboratory work is standard practice in Electrical Engineering Education, but student explorations of basic RF/Microwave circuits at the transistor-electromagnetics level are particularly challenging. This paper describes an interconnected set of basic electromagnetic and transistor-level RF/Microwave modules that may be assembled into a short range wireless link or modulated scatterer radar system. These Analog/RF/Microwave building blocks are used across the Senior and Graduate Level curriculum.

The Design And Implementation Of An Adaptive Chess Game, Mehdi Peiravi

Electronic Theses, Projects, and Dissertations

In recent years, computer games have become a common form of entertainment. Fast advancement in computer technology and internet speed have helped entertainment software developers to create graphical games that keep a variety of players’ interest. The emergence of artificial intelligence systems has evolved computer gaming technology in new and profound ways. Artificial intelligence provides the illusion of intelligence in the behavior of NPCs (Non-Playable-Characters). NPCs are able to use the increased CPU, GPU, RAM, Storage and other bandwidth related capabilities, resulting in very difficult game play for the end user. In many cases, computer abilities must be toned down …

An Investigation Into Partitioning Algorithms For Automatic Heterogeneous Compilers, Antonio M. Leija

Master's Theses

Automatic Heterogeneous Compilers allows blended hardware-software solutions to be explored without the cost of a full-fledged design team, but limited research exists on current partitioning algorithms responsible for separating hardware and software. The purpose of this thesis is to implement various partitioning algorithms onto the same automatic heterogeneous compiler platform to create an apples to apples comparison for AHC partitioning algorithms. Both estimated outcomes and actual outcomes for the solutions generated are studied and scored. The platform used to implement the algorithms is Cal Poly’s own Twill compiler, created by Doug Gallatin last year. Twill’s original partitioning algorithm is chosen …

Development Of Cpanel, An Unstructured Panel Code, Using A Modified Tls Velocity Formulation, Christopher R. Satterwhite

Master's Theses

The use of panel codes in the aerospace industry dates back many decades. Recent advances in computer capability have allowed them to evolve, both in speed and complexity, to provide very quick solutions to complex flow fields. By only requiring surface discretization, panel codes offer a faster alternative to volume based methods, delivering a solution in minutes, as opposed to hours or days. Despite their utility, the availability of these codes is very limited due to either cost, or rights restrictions.

This work incorporates modern software development practices, such as unit level testing and version control, into the development of …

A Comparative Study Of Polyurethane Nanofibers With Different Patterns And Its Analogous Nanofibers Containing Mwcnts, Javier Macossay-Torres, Faheem A. Sheikh, Hassan Ahmad, Hern Kim, Gary L. Bowlin

School of Integrative Biological & Chemical Sciences (Formerly Dept. of Chemistry)

Tissue engineering is a multidisciplinary field that has evolved in various dimensions in recent years. One of the main aspects in this field is the proper adjustment and final compatibility of implants at the target site of surgery. For this purpose, it is desired to have the materials fabricated at the nanometer scale, since these dimensions will ultimately accelerate the fixation of implants at the cellular level. In this study, electrospun polyurethane nanofibers and their analogous nanofibers containing MWCNTs are introduced for tissue engineering applications. Since MWCNTs agglomerate to form bundles, a high intensity sonication procedure was used to disperse …

Fast Sequence Component Analysis For Attack Detection In Synchrophasor Networks, Jordan Landford, Rich Meier, Richard Barella, Xinghui Zhao, Robert B. Bass, Scott Wallace

Electrical and Computer Engineering Faculty Publications and Presentations

Modern power systems have begun integrating synchrophasor technologies into part of daily operations. Given the amount of solutions offered and the maturity rate of application development it is not a matter of "if" but a matter of "when" in regards to these technologies becoming ubiquitous in control centers around the world. While the benefits are numerous, the functionality of operator-level applications can easily be nullified by injection of deceptive data signals disguised as genuine measurements. Such deceptive action is a common precursor to nefarious, often malicious activity. A correlation coefficient characterization and machine learning methodology are proposed to detect and …

Linear Mode Cmos Compatible P-N Junction Avalanche Photodiode For Smart-Lighting Applications, Md. Mottaleb Hossain

Optical Science and Engineering ETDs

There is a need in emerging smart lighting concepts for a high-speed sensing capability to enable adaptive lighting (smart spaces) and visible light communication. One approach to address this need is to design and manufacture a novel complementary-metal—oxide—semiconductor (CMOS) compatible, cost-effective detector array and readout circuit (ROIC) that incorporates integrated waveguide detectors and avalanche photodiodes (APDs). This thesis focuses on the APD design and fabrication component of the sensing capability required by smart-lighting systems. Silicon CMOS compatible APDs are expected to provide high-speed and high-sensitivity sensors in terms of simplicity of design, low power consumption and cost-effectiveness for smart-lighting applications. …

Investigating The Correlation Between Freeway Service Levels And Freeway Service Patrol Assists, Nora Chin

Master's Theses

The Bay Area Metropolitan Transportation Commission’s (MTC) Freeway Service Patrol’s highway motorist response service is reporting a reduction in their service levels. We analyze the relationship between the reduction in the Bay Area Freeway Service Patrol’s (FSP) motorist assists and changes in vehicle miles traveled (VMT), California Highway Patrol (CHP) reported incidents, and cover research on the impact of new and old vehicle fleet turnover. VMT and CHP incidents have differential effects on FSP assists. Although incidents occurring on freeways with high traffic flows tend to cause more congestion, the trend in local VMT along Bay Area freeway corridors does …

An Approach For Designing Origami-Adapted Products With Aerospace Mechanism Examples, Jessica Morgan

Theses and Dissertations

The objective of this research is to develop a design process for origami-adapted products and demonstrate it using aerospace mechanism examples. Origami-adapted design is a type of origami-based design. Origami-based design ranges from abstract to concrete applications of origami to design and includes: origami-inspired design, origami-adapted design, and origami-applied design. Origami-adapted design adapts origami fold patterns into products while preserving functionality. Some of the desirable attributes of origami that are sought after in design include: 1) reduced number of parts, 2) stowability, 3) deployability, 4) transportability, 5) manufacturability from a flat sheet of material, 6) ease of miniaturization, 7) a …

Error Probabilities For Optical Receivers That Employ Dynamically Biased Avalanche Photodiodes, Georges El-Howayek, Majeed M. Hayat

Electrical and Computer Engineering Faculty Research and Publications

A novel theory was recently reported for the avalanche multiplication process in avalanche photodiodes (APDs) under dynamic reverse-biasing conditions. It has been shown theoretically that the bit-synchronized, periodic modulation of the electric field in the multiplication region can offer improvements in the gain-bandwidth product by reducing intersymbol interference in optical receivers. This paper reports a rigorous formulation of the sensitivity of optical receivers that employ dynamically biased APDs. To enable the sensitivity analysis, a recurrence theory is developed to calculate the joint probability distribution function (PDF) of the stochastic gain and avalanche buildup time in APDs that are operated under …

Perceived Adequacy Of Illumination, Spatial Brightness, Horizontal Illuminance And Mean Room Surface Exitance In A Small Office, James Duff, Kevin Kelly, Christopher Cuttle

Articles

This paper presents a pilot study that investigated the suitability of mean room surface exitance as a predictor of spatial brightness and perceived adequacy of illumination, and then compared these results with how horizontal illuminance predicted both items under the same conditions. The experiment included 26 participants. A small office was used for the study. It exposed participants to three levels of mean room surface exitance, each delivered with three different light distributions and across three different surface reflectances, resulting in a total of 27 light scenes. A clear relationship existed between mean room surface exitance and both perceived adequacy …

Project Delivery Methods For The Construction Of Public Schools In The Southeastern United States, Dennis C. Bausman

The Professional Constructor

Construction of new facilities is a risky enterprise due to the situational aspects of the project, multiple parties involved in the process, timing and budget constraints, and the design features and quality levels required by the owner. Decision makers are charged with selecting a project delivery system to successfully manage the design and construction process in order to meet the owner’s needs. This paper documents the delivery methods utilized for the construction of public schools in Florida, Georgia, North Carolina, and South Carolina from 2006 to 2012 and provides insight into the reasons for the delivery method selections made by …

Construction Degree Graduates: An Evaluation Of Depth Of Skill Understanding And Skill Priority By Construction Industry Professionals, Ben F. Bigelow, Edelmiro Escamilla, Lauren Kuecker

The Professional Constructor

Previous studies have been conducted to determine the skills the construction industry expects graduates and entry level professionals to possess. The majority of those studies report soft skills and technical expertise as the main qualities graduates should have upon entering the industry. Many differing skills have been reported, but neither the expected depth of understanding in those skills nor the industry’s priority of those skills have been explored. To do so, a survey was administered to members of the Construction Industry Advisory Council at Texas A&M University asking these questions. Depth of understanding was evaluated on a four level basis …

Accident Patterns In Road Construction Work Zones, Tariq Shehab, Leah Phu

The Professional Constructor

Traffic safety in road construction zones has always been a major concern for engineering practitioners, departments of transportation, law enforcement professionals, researchers and many others. Due to the deteriorated condition of road and underground infrastructure facilities in the United States, the number of rehabilitation projects and their associated traffic accidents have increased over the past few years. To perform the needed road and underground utility rehabilitation activities in safer environments, researchers need to understand the causes behind these accidents. Although many researchers have been exploring the safety of many construction activities, research pertaining to road construction projects is lacking and …

Reviewer Thank You, Jason Lucas

The Professional Constructor

No abstract provided.

A Framework For Small-Scale Construction Projects By Ngos In Developing Countries, James D. Goedert, Bradley Cory

The Professional Constructor

This paper outlines a theoretical framework for NGOs who are building small-scale construction projects in developing countries. The framework is a step-by-step procedure to guide NGOs from developing project parameters at the start of the project with the partner to a locally controlled sustainable project closeout. The authors used the integrative project delivery approach along with past construction research models and personal experience to guide the development of the framework. Steps within the framework are illustrated using five projects from three countries. This work assumes that the ultimate objective of the project is local operational sustainability with the NGO’s presence …

From Physical Security To Cybersecurity, Arunesh Sinha, Thanh H. Nguyen, Debarun Kar, Matthew Brown, Milind Tambe, Albert Xin Jiang

Research Collection School Of Computing and Information Systems

Security is a critical concern around the world. In many domains from cybersecurity to sustainability, limited security resources prevent complete security coverage at all times. Instead, these limited resources must be scheduled (or allocated or deployed), while simultaneously taking into account the importance of different targets, the responses of the adversaries to the security posture, and the potential uncertainties in adversary payoffs and observations, etc. Computational game theory can help generate such security schedules. Indeed, casting the problem as a Stackelberg game, we have developed new algorithms that are now deployed over multiple years in multiple applications for scheduling of …

Sandra Helps You Learn: The More You Walk, The More Battery Your Phone Drains, Chulhong Min, Chungkuk Yoo, Inseok Hwang, Seungwoo Kang, Youngki Lee, Seungchul Lee, Pillsoon Park, Changhun Lee, Seungpyo Choi Choi

Research Collection School Of Computing and Information Systems

Emerging continuous sensing apps introduce new major factors governing phones’ overall battery consumption behaviors: (1) added nontrivial persistent battery drain, and more importantly (2) different battery drain rate depending on the user’s different mobility condition. In this paper, we address the new battery impacting factors significant enough to outdate users’ existing battery model in real life. We explore an initial approach to help users understand the cause and effect between their physical activity and phones’ battery life. To this end, we present Sandra, a novel mobility-aware smartphone battery information advisor, and study its potential to help users redevelop their battery …

A Rolling Horizon Auction Mechanism And Virtual Pricing Of Shipping Capacity For Urban Consolidation Centers, Chen Wang, Hoong Chuin Lau, Yun Fong Lim

Research Collection School Of Computing and Information Systems

A number of cities around the world have adopted urban consolidation centers (UCCs) to address challenges of last-mile deliveries. At the UCC, goods are consolidated based on their destinations prior to their deliveries into city centers. Typically, a UCC owns a fleet of ecofriendly vehicles to carry out such deliveries. Shippers/carriers that make use of the UCC’s service hence no longer need to be restricted by timewindow and vehicle-type regulations. As a result, they retain the ability to deploy large trucks for the economies of scale from the source to the UCC which is located outside the city center. Furthermore, …

Work Vehicle Warning Lights: Color Options And Effectiveness, Brian K. Howell, Jerry G. Pigman, Kenneth R. Agent

Kentucky Transportation Center Research Report

KTC reviewed existing regulations, guidance, and practices to assess the Kentucky Transportation Cabinet’s warning lights program on highway work vehicles. The Kentucky Revised Statutes categorizes KYTC vehicles as “public safety vehicles” and requires their use of amber lights. Because the use of red can be confused with emergency vehicles, KYTC prohibits the use of red on work vehicles. At the national level, standards for warning light colors do not exist. Rather, AASHTO provides guidance on roadway operations equipment and recommends the use of amber and white lights as the primary warning light colors for highway vehicles. AASHTO guidance also prescribes …

Opportunities To Identify Unmet Needs Outside Of The Operating Room, Jay R. Goldberg

Biomedical Engineering Faculty Research and Publications

The ability to identify unmet needs and new product opportunities is an important skill for biomedical engineering students planning a career in the medical device industry. Most biomedical engineering graduates will work in industry where many projects will not be defined for them. They will need to work with physicians, surgeons, nurses, clinical engineers, and other users of medical technology to identify problems and unmet needs and will work closely with marketing, sales, and other personnel to identify new product development opportunities. Students will be better prepared for careers involving the development of new medical devices if they are able …

Lipopolysaccharide Induced Map Kinase Activation In Raw 264.7 Cells Attenuated By Cerium Oxide Nanoparticles, Vellaisamy Selvaraj, Niraj Nepal, Steven Rogers, Nandini D.P.K. Manne, Ravikumar Arvapalli, Kevin M. Rice, Shinichi Asano, Erin Fankenhanel, J. Y. Ma, Tolou Shokuhfar, Mani Maheshwari, Eric R. Blough

Michigan Tech Publications, Part 1

High mortality rates are associated with the life threatening disease of sepsis. Improvements in septic patient survivability have failed to materialize with currently available treatments. This article represents data regarding a study published in biomaterials (Vellaisamy et al., Biomaterials, 2015, in press). with the purpose of evaluating whether severe sepsis mortality and associated hepatic dysfunction induced by lipopolysaccharide (LPS) can be prevented by cerium oxide nanoparticles (CeO2NPs) treatment in male Sprague Dawley rats. Here we provide the information about the method and processing of raw data related to our study publish in Biomaterials and Data in Brief (Vellaisamy et al., …