Engineering Commons^™

Flight Physician - October, 2014, Civil Aviation Medical Association

Browse all Civil Aviation Medical Association Newsletters

A twelve page newsletter of the Civil Aviation Medical Association. The newsletter provided news about civil aviation medicine and information related to the organization.

Characterization Of Bone Material Properties And Microstructure In Osteogenesis Imperfecta/Brittle Bone Disease, John Robert Jameson

Dissertations (1934 -)

Osteogenesis imperfecta (OI) is a genetic disorder primarily associated with mutations to type I collagen and resulting in mild to severe bone fragility. To date, there is very little data quantifying OI cortical bone mechanics. The purpose of this dissertation was to investigate bone microstructure, mineralization, and mechanical properties in adolescents with OI. Characterization studies were performed on small osteotomy specimens obtained from the extremities during routine corrective surgeries. Nanoindentation was used to examine the longitudinal elastic modulus and hardness at the material level for mild OI type I vs. severe OI type III. Both modulus and hardness were significantly …

The Structure-Function Relationship Of Pamam Dendrimers As Robust Oil Dispersants, Nicholas K. Geitner, Bo Wang, Rachel E. Andorfer, David A. Ladner, Pu Chen Ke, Feng Ding

Publications

PAMAM dendrimers have recently been investigated as efficient and biocompatible oil dispersants utilizing their encapsulation capacity; however, their high cationic charge density has been shown to be cytotoxic. It is therefore imperative to mitigate cationic charge-induced toxicity and understand the effects of such changes. Presented here is a synergistic experimental and computational approach to examine the effects of varying terminal surface charge on the capacity of dendrimers to disperse model liner, polycyclic aromatic, and hybrid hydrocarbons. Uncharged dendrimers collapse by forming intramolecular hydrogen bonds, which reduce the hosting capability. On the other hand, changing the surface charges from positive to …

Capacity-Related Driver Behavior On Modern Roundabouts Built On High-Speed Roads, Shaikh Ahmad

Open Access Theses

The objective of this thesis was to investigate the factors that affect capacity-related driver behavior on modern roundabouts built on high-speed roads. The capacity of roundabouts is strongly affected by the behavior of drivers as represented by critical headway (critical gap) and follow-up headway (follow-up time). The effects of heavy vehicles (single-unit truck, bus, and semi-trailer) and area type (rural or urban) on roundabout capacity were investigated by comparing the critical headways for roundabouts located on high-speed and low-speed roads. The effects of nighttime conditions (in the presence of street lighting) were also considered. Data were collected using the Purdue …

Strategies For The Replacement Of Historic Bridge Guardrails, Adam J. Clauss

Open Access Theses

Bridges that are designated historic present a special challenge to bridge engineers whenever rehabilitation work or improvements are made to the bridges. Federal and state laws protect historically significant bridges, and railings on these bridges can be subject to protection because of the role they play in aesthetics. Unfortunately, original railings on historic bridges do not typically meet current crash-test requirements and typically do not meet current standards for railing height and size of permitted openings. The objective of this study is to develop strategies that can be used to address existing railings on historic bridges and to develop solutions …

Wi-Fi Real Time Location Systems, Benjamin A. Doll

Open Access Theses

This thesis objective was to determine the viability of utilizing an untrained Wi-Fi real time location system as a GPS alternative for indoor environments. Background research showed that GPS is rarely able to penetrate buildings to provide reliable location data. The benefit of having location information in a facility and how they might be used for disaster or emergency relief personnel and their resources motivated this research. A building was selected with a well-deployed Wi-Fi infrastructure and its untrained location feature was used to determine the distance between the specified test points and the system identified location. It was found …

A Computational Analysis Of The Aerodynamic And Aeromechanical Behavior Of The Purdue Multistage Compressor, David Monk

Open Access Theses

Compressor design programs are becoming more reliant on computational tools to predict and optimize aerodynamic and aeromechanical behavior within a compressor. Recent trends in compressor development continue to push for more efficient, lighter weight, and higher performance machines. To meet these demands, designers must better understand the complex nature of the inherently unsteady flow physics inside of a compressor. As physical testing can be costly and time prohibitive, CFD and other computational tools have become the workhorse during design programs.

The objectives of this research were to investigate the aerodynamic and aeromechanical behavior of the Purdue multistage compressor, as well …

Quartz-Mems: Wet Chemical Etching Assisted By Electromagnetic Energy Sources For The Development Of Quartz Crystal To Be Used For Microelectromechanical Systems, William J. Clower

Doctoral Dissertations

Quartz crystal resonators have been the most commonly used timing devices to date. Today's timing market requires devices to be as small as possible and consume smaller amounts of energy. Because of the market demand, many startup companies have formed to develop silicon resonators as timing devices. Silicon resonators have poor noise and temperature performance (due to its linear temperature versus frequency coefficient). At the moment the only advantage that silicon resonators have over quartz crystal resonators is a small form factor. The photolithography processing method currently being used in industry is a very tedious task, requiring multiple etching steps …

Likert-Type Fuzzy Uncertainty From A Traditional Decision Making Viewpoint: How Symmetry Helps Explain Human Decision Making (Including Seemingly Irrational Behavior), Joe Lorkowski, Vladik Kreinovich

Departmental Technical Reports (CS)

One of the main methods for eliciting the values of the membership function μ(x) is to use the Likert-type scales, i.e., to ask the user to mark his or her degree of certainty by an appropriate mark k on a scale from 0 to n and take μ(x) = k/n. In this paper, we show how to describe this process in terms of the traditional decision making, and we conclude that the resulting membership degrees incorporate both probability and utility information. It is therefore not surprising that fuzzy techniques often work better than probabilistic techniques (which only take into account …

Computational Study Of Sodium Magnesium Hydride For Hydrogen Storage Applications, Fernando Antonio Soto Valle

Doctoral Dissertations

Hydrogen offers considerable potential benefits as an energy carrier. However, safe and convenient storage of hydrogen is one of the biggest challenges to be resolved in the near future. Sodium magnesium hydride (NaMgH 3) has attracted attention as a hydrogen storage material due to its light weight and high volumetric hydrogen density of 88 kg/m3. Despite the advantages, hydrogen release in this material occurs at approximately 670 K, which is well above the operable range for on-board hydrogen storage applications. In this regard, hydrogen release may be facilitated by substitution doping of transition-metals. This dissertation describes first-principles computational methods that …

Solar Sail Trajectory Design In The Earth-Moon Circular Restricted Three Body Problem, Ashwati Das

Open Access Theses

The quest to explore the Moon has helped resolve scientific questions, has spurred leaps in technology development, and has revealed Earth's celestial companion to be a gateway to other destinations. With a renewed focus on returning to the Moon in this decade, alternatives to chemical propulsion systems are becoming attractive methods to efficiently use scarce resources and support extended mission durations. Thus, an investigation is conducted to develop a general framework, that facilitates propellant-free Earth-Moon transfers by exploiting sail dynamics in combination with advantageous transfer options offered in the Earth-Moon circular restricted multi-body dynamical model. Both periodic orbits in the …

Noise-Enhanced Information Systems, Hao Chen, Lav R. Varshney, Pramod K. Varshney

Electrical and Computer Engineering Faculty Publications and Presentations

Noise, traditionally defined as an unwanted signal or disturbance, has been shown to play an important constructive role in many information processing systems and algorithms. This noise enhancement has been observed and employed in many physical, biological, and engineered systems. Indeed stochastic facilitation (SF) has been found critical for certain biological information functions such as detection of weak, subthreshold stimuli or suprathreshold signals through both experimental verification and analytical model simulations. In this paper, we present a systematic noise-enhanced information processing framework to analyze and optimize the performance of engineered systems. System performance is evaluated not only in terms of …

Application Of Integer Quadratic Programming To Detection Of High-Dimensional Wireless Systems, Jamal Yousuf Alsawalhi

Open Access Dissertations

This work introduces a novel permanent-magnet synchronous machine (PMSM) architecture that employs rotational asymmetry to increase the torque density output in constant power variable speed applications. A population based multi-objective design optimization algorithm is used to design and analyze the new machine topology. A number of design studies are presented to show that the proposed machine structure outperforms a conventional PMSM machine. Validation of the analytical machine design model using a three dimensional finite element analyses is performed and the results are presented. Finally, a case study in which a hybrid electric bus traction motor is designed is presented.

Surface Acoustic Wave (Saw)-Based Gas Flow Sensor, Nisar Ahmad

Dissertations (1934 -)

There has been a growing interest in using SAW devices for sensing various physical parameters such as pressure, acceleration, temperature, and gas. The current research has been undertaken to derive a model of a SAW-based gas flow rate sensor, using the principle of heat transfer with the flow of gas. It consists of a SAW delay line fabricated on a suitable substrate and a thin film heater to heat the SAW device to a suitable temperature above the ambient. The delay line is connected in the feedback loop of an rf-amplifier resulting in a delay line stabilized SAW oscillator. When …

Acuta Enews October 2014 Issue 10

ACUTA Newsletters

Nominate for ACUTA Board

Social Media Planning

U.S. Campuses Spend $4 Billion Annually on Unmanaged, Unmeasured Investments

October is National Cyber Security Awareness Month

Wasting Time on Daylight Saving Time?

Nominations Open for Institutional Excellence Awards

Board Report

VoIP: Voice Quality Problems & Recommendations

Randy's Top 10 Info Links

Welcome New Members

Check It Out

Applications Of Halloysite Nanocontainers For Functional Protective Coating, Anupam Ramesh Joshi

Doctoral Dissertations

In this study we have explored the applications of halloysite clay nanotubes as a nanocontainer. Halloysite nanotubes are used as a storage unit for anticorrosion agents, flame retardants, and a dopant to extend the curing time for geopolymer composites. Halloysite is a naturally occurring clay mineral with a chemical formula of Al2Si2O 5(OH)4 · 2 H2O and is identical to kaolinite with the exception that it holds an additional water monolayer in its interlayered spaces. Upon heating at higher temperatures, halloysite loses the additional water monolayer, and this variant known colloquially as "meta-halloysite" has a chemical formula of Al2Si2O5(OH) 4 …

Nanotechnology And Additive Manufacturing Platforms For Clinical Medicine: An Investigation Of 3d Printing Bioactive Constructs And Halloysite Nanotubes For Drug Delivery And Biomaterials, Jeffery A. Weisman

Doctoral Dissertations

Personalized medicine requires the development of new technologies for controlled or targeted drug delivery. Three-dimensional (3D) printing and additive manufacturing techniques can be used to generate customized constructs for bioactive compound delivery. Nanotechnology in the form of nanoparticles, used as a stand-alone construct or for material enhancements, can significantly improve established biomaterials such as PMMA based bone cements or enable new technology to have enhanced capabilities. Combinations of the technologies can be used in such applications as infectious disease treatments, chemotherapeutic targeted drug delivery or targeted delivery of nearly any bioactive compound.

Chemotherapeutic or antibiotic enhanced 3D printing filaments were …

Interdisciplinary, Collaborative International Service Learning: Developing Engineering Students As Global Citizens, Anthony D. Songer, Karen R. Breitkreuz

Construction Management Faculty Publications and Presentations

Recent calls to reform engineering education place emphasis on applied math and science within the broader context of globalization, economics, the environment, and society. This broad and complex challenge necessitates the investigation of new interdisciplinary education approaches for engineering education. This paper presents a formal approach for developing engineering students as global citizens. The 360 Degree Model for Educating Socially Responsible Global Citizens (360 Global Ed model) presented herein includes a framework for foundational theory, educational environment, academic coursework, and outcomes. At the core of the emerging model is an international service learning experience called the Village Network. …

Wear Characteristics Of Wright State University Total Ankle Replacement Under Shear And Torsion Loads, Tarun Goswami, Dinesh Gundapaneni

Biomedical, Industrial & Human Factors Engineering Faculty Publications

Introduction: Total ankle replacement (TAR) involves replacement of the damaged bone with prosthetic components and is usually performed in patients suffering with arthritis to relieve pain and maintain motion. There are several different factors that contribute to failure of TARs but aseptic loosening is the primary method of failure in total ankle replacements. Because of its superior mechanical properties UHMWPE is used as a liner material in TARs. Wear generated from the liner due to high contact stresses during gait causes osteolysis resulting in early loosening of the prostheses.

Most of the earlier studies have focused on wear due to …

Manipulation Of Light In Plasmonic Nano-Structures, Rehab Kotb Abd-Allah

Theses and Dissertations

Manipulating light at nano-scale is usually shadowed by the diffraction limit. Recently, plasmonics have emerged as a new technology that enables confining light at nano-scale. Using plasmonic structures, photonic devices can be shrunk from the micro-scale to the nano-scale. In this thesis, a novel structure to a plasmonic nano-filter is introduced and analyzed. The proposed nano-resonator has low loss, compact size and good sensing characteristics. A closed form model to the filter behavior is developed. The model is extracted from the waveguide physical parameters and provides a physical insight into the structure of the filter. An analytical model to the …

An Integrated Active Power Filter-Ultracapacitor Design To Provide Intermittency Smoothing And Reactive Power Support To The Distribution Grid, Deepak Somayajula, Mariesa L. Crow

Electrical and Computer Engineering Faculty Research & Creative Works

Grid integration of distributed energy resources (DERs) is increasing rapidly. Furthermore, smart grid technologies are making the grid more bi-directional providing opportunities to consumers to supply power back to the grid. Energy storage technologies like battery and ultracapacitor (UCAP) can be integrated through grid-tied inverters to support variable DERs such as solar and wind. In these cases, the energy storage with active power capability can improve grid performance by providing active and reactive power support. In this paper, the concept of providing active/reactive power support and renewable intermittency smoothing to the distribution grid by UCAPs is presented. UCAPs have a …

An Ultracapacitor Integrated Power Conditioner For Intermittency Smoothing And Improving Power Quality Of Distribution Grid, Deepak Somayajula, Mariesa L. Crow

Electrical and Computer Engineering Faculty Research & Creative Works

Penetration of various types of distributed energy resources (DERs) like solar, wind, and plug-in hybrid electric vehicles (PHEVs) onto the distribution grid is on the rise. There is a corresponding increase in power quality problems and intermittencies on the distribution grid. In order to reduce the intermittencies and improve the power quality of the distribution grid, an ultracapacitor (UCAP) integrated power conditioner is proposed in this paper. UCAP integration gives the power conditioner active power capability, which is useful in tackling the grid intermittencies and in improving the voltage sag and swell compensation. UCAPs have low energy density, high-power density, …

Stress Amplification During Development Of The Tendon-To-Bone Attachment, Y. Liu, A. G. Schwartz, Victor Birman, S. Thomopoulos, G. M. Genin

Mechanical and Aerospace Engineering Faculty Research & Creative Works

No abstract provided.

Novel Through-Silicon-Via Inductor-Based On-Chip Dc-Dc Converter Designs In 3d Ics, Umamaheswara Rao Tida, Cheng Zhuo, Yiyu Shi

Electrical and Computer Engineering Faculty Research & Creative Works

There has been a tremendous research effort in recent years to move DC-DC converters on chip for enhanced performance. However, a major limiting factor to implementing on-chip inductive DC-DC converters is the large area overhead induced by spiral inductors. Thus, we propose using through-silicon-vias (TSVs), a critical enabling technique in three-dimensional (3D) integrated systems, to implement on-chip inductors for DC-DC converters. While existing literature show that TSV inductors are inferior compared with conventional spiral inductors due to substrate loss for RF applications, in this article, we demonstrate that it is not the case for DC-DC converters, which operate at relatively …

Development And Degradation Behavior Of Magnesium Scaffolds Coated With Polycaprolactone For Bone Tissue Engineering, Mostafa Yazdimamaghani, Mehdi Razavi, Daryoosh Vashaee, Lobat Tayebi

Chemical and Biochemical Engineering Faculty Research & Creative Works

Rapid degradation of magnesium (Mg) alloys is the major drawback preventing these materials from being applicable as tissue engineering scaffolds. In order to resolve this issue, in this paper, porous Mg scaffolds coated by polycaprolactone (PCL) were synthesized and their material properties and in vitro biodegradation were fully examined. The results indicated that PCL coating can significantly enhance the compressive strength and degradation resistance of Mg scaffolds. We showed that while the uncoated Mg scaffold degrades completely (100% weight loss) after 72 h, the degradation (weight loss) of the Mg scaffolds coated by 3% and 6% PCL is only 36% …

Cnt-Reinforced Polymer Nanocomposite By Molecular Dynamics Simulations, Yaeji Kim

Open Access Dissertations

Polymer matrix composites reinforced with carbon nanotubes (CNTs) have received significant attention due to their potential for exceptional mechanical, electrical, thermal and optical properties. The enhancement of ultimate mechanical properties of CNT reinforced polymer composites is governed not just by the properties of the two phases but by dispersion of the CNTs, interactions in the interfacial region and local molecular changes in polymer due to the vicinity of the CNTs. Strong adhesive interactions between the matrix and CNT leads to good compatibility preventing the aggregation of the reinforcements and results in optimal mechanical response. Even though significant efforts have been …

Solid Amine-Boranes As High Performance Hypergolic Hybrid Rocket Fuels, Mark A. Pfeil

Open Access Dissertations

Hypergolic hybrid rockets have the potential of providing systems that are simple, reliable, have high performance, and allow for energy management. Such a propulsion system can be applied to fields that need a single tactical motor with flexible mission requirements of either high speed to target or extended loitering. They also provide the possibility for alternative fast response dynamic altitude control systems if ignition delays are sufficiently short. ^ Amines are the traditional fuel of choice when selecting a hypergolic combination as these tend to react readily with both nitric acid and dinitrogen tertroxide based oxidizers. It has been found …

Construction Management Service Learning: A "How To" Process For Success, R. Casey Cline, Ken Robson, Michael Kroth

Construction Management Faculty Publications and Presentations

To ensure that students are prepared for positions in the construction industry, construction management education programs expose students to industry relevant construction management (CM) theory and practice. Traditional transmission teaching methodologies, while arguably effective for teaching management theory and practice, are not as effective for the transfer of practical leadership skills and knowledge of construction specific processes. As an alternative teaching strategy, many CM programs incorporate service-learning (S-L) into curricula; providing students practical experience, focusing on the acquisition of knowledge through goal setting, thinking, planning, experimentation, observation, and reflection.

However, from a practical standpoint, the development of a service-learning project …

Data Completion Methods For Improved Developmental Stage Annotation Of Drosophila Embryos In Images, Chitsanu Janyalikit

Electrical & Computer Engineering Theses & Dissertations

Drosophila melanogaster is a dominant model organism for studying the function of animal genes in initial stages of embryogenesis. Usually, images containing Drosophila gene expression patterns are captured at different developmental stages to study the interconnection of animal genes. To achieve most biologically meaningful results, gene expression images from a similar stage should be compared. Currently, biologists manually classify embryos in images into different stages, which is time intensive and infeasible for current massively produced gene expression images. Therefore, there is a need to develop an automatic system for the annotation.

Gene expression information in embryo images usually appears as …

Numerical Studies Of The A6 Relativistic Magnetron Using Particle-In-Cell Simulations, Vineetha Jujjavarapu

Electrical & Computer Engineering Theses & Dissertations

The magnetron became a major component in radar systems around the time of the World War II. More recent radar techniques require short microwave pulses (with nanosecond pulse-widths for ultra wideband operations) and high peak power in the Giga-Watt range. In order to achieve these specifications for the military, the magnetron needs to have both a fast start and the rapid growth rate of oscillations in order to serve as a microwave source for the short-pulse applications. These two factors depend on the geometry of the cathode. Other requirements include high conversion efficiency and low leakage current (in order to …