Engineering Commons^™

Design Of A 3-D Printed Unified Hybrid Motor, Matthew A. Hitt, Michael D. Mascaro

Von Braun Symposium Student Posters

No abstract provided.

Control Of A Fuel Cell Based Autonomous Electric Power System For An Aerospace Vehicle, Roshini S. Ashok

Von Braun Symposium Student Posters

No abstract provided.

Development Of An Optically-Actuated Carbon Nanotube (Cnt) Laminated Composite, John Alcorn

Von Braun Symposium Student Posters

No abstract provided.

Telecommunication Network Survivability For Improved Reliability In Smart Power Grids, Sankalp Mogla

USF Tampa Graduate Theses and Dissertations

Power transmission grid infrastructures deliver electricity across large distance and are vital to the functioning of modern society. Increasingly these setups embody highly-coupled cyber-physical systems where advanced telecommunications networks are used to send status and control information to operate power transmission grid components, i.e., "smart grids". However, due to the high inter-dependency between the communication and power grid network layers, failure events can lead to further loss of control of key grid components, i.e., even if they are undamaged. In turn, such dependencies can exacerbate cascading failures and lead to larger electricity blackouts, particularly under disaster conditions. As a result, …

High Powered Composite Payload Fairing Rocket For Deployable Robotics, Markus Murdy

Von Braun Symposium Student Posters

No abstract provided.

Spacebird: Promoting Space Exploration Through Space Tourism, Eléonore Fontanges

Von Braun Symposium Student Posters

No abstract provided.

Small Motor Testing For Determining The Burning Rate Of Solid Propellant, Daniel A. Jones

Von Braun Symposium Student Posters

No abstract provided.

The One Month Project As A Training Tool Of The Space Hardware Club, Nathanial Long

Von Braun Symposium Student Posters

No abstract provided.

Calibrating Balloon Euso, Matt Rodencal

Von Braun Symposium Student Posters

No abstract provided.

Cognitively Tailored Interfaces (Ctis) For Unmanned Aerial Vehicles (Uavs), Anna Parker Strickland

Von Braun Symposium Student Posters

No abstract provided.

The Stochastic Dynamics Of Tethered Microcantilevers In A Viscous Fluid, Brian A. Robbins, Milad Radiom, William A. Ducker, John Y. Walz, Mark R. Paul

Chemical and Materials Engineering Faculty Publications

We explore and quantify the coupled dynamics of a pair of micron scale cantilevers immersed in a viscous fluid that are also directly tethered to one another at their tips by a spring force. The spring force, for example, could represent the molecular stiffness or elasticity of a biomolecule or material tethered between the cantilevers. We use deterministic numerical simulations with the fluctuation-dissipation theorem to compute the stochastic dynamics of the cantilever pair for the conditions of experiment when driven only by Brownian motion. We validate our approach by comparing directly with experimental measurements in the absence of the tether …

Soil Carbon Accumulation Under Switchgrass Barriers, Humberto Blanco-Canqui, John E. Gilley, Dean E. Eisenhauer, Paul J. Jasa, Alan L. Boldt

Department of Agricultural and Biological Systems Engineering: Faculty Publications

The benefits of grass barriers or hedges for reducing offsite transport of non-point-source water pollutants from croplands are well recognized, but their ancillary benefits on soil properties have received less attention. We studied the 15-yr cumulative effects of narrow and perennial switchgrass (Panicum virgatum L.) barriers on soil organic C (SOC), total N, particulate organic matter (POM), and associated soil structural properties as compared with the cropped area on an Aksarben silty clay loam (fine, smectitic, mesic Typic Argiudoll) with 5.4% slope in eastern Nebraska. Five switchgrass barriers were established in 1998 at ~38-m intervals parallel to the crop rows …

Exergetic Life Cycle Assessment Of Electrospun Polyvinylidene Fluoride Nanofibers, Salman Ali Abbasi

USF Tampa Graduate Theses and Dissertations

Assessing the sustainability of nanomanufacturing products and processes has been difficult to achieve using conventional approaches mainly due to an inadequate inventory, large process-to-process variation, and a dearth of relevant toxicology data for nanomaterials. Since these issues are long term in nature, it is required to create hybrid methodologies that can work towards filling the existing gaps. Merging thermodynamic techniques such as the exergy analysis with environmental assessments can help make better, more informed choices while providing an opportunity for process improvement by enabling to correctly quantify efficiency loss through the waste stream, and by locating the exact areas for …

Photonic Crystal-Based Flow Cytometry, Justin William Stewart

USF Tampa Graduate Theses and Dissertations

Photonic crystals serve as powerful building blocks for the development of lab-on-chip devices. Currently they are used for a wide range of miniaturized optical components such as extremely compact waveguides to refractive-index based optical sensors. Here we propose a new technique for analyzing and characterizing cells through the design of a micro-flow cytometer using photonic crystals. While lab scale flow cytometers have been critical to many developments in cellular biology they are not portable, difficult to use and relatively expensive. By making a miniature sensor capable of replicating the same functionality as the large scale units with photonic crystals, we …

Driven By Beliefs: Understanding Challenges Physical Science Teachers Face When Integrating Engineering And Physics, Emily A. Dare, Joshua A. Ellis, Gillian H. Roehrig

Journal of Pre-College Engineering Education Research (J-PEER)

It is difficult to ignore the increased use of technological innovations in today’s world, which has led to various calls for the integration of engineering into K-12 science standards. The need to understand how engineering is currently being brought to science classrooms is apparent and necessary in order to address these calls for integration. This multiphase, mixed-methods study investigated the classroom practices and beliefs of high school physical science teachers following an intensive professional development on physics and engineering integration.

Classroom observations showed that teachers new to incorporating engineering into their physical science classrooms often struggled to maintain focus on …

Design Practices Of Preservice Elementary Teachers In An Integrated Engineering And Literature Experience, Kristen Bethke Wendell

Journal of Pre-College Engineering Education Research (J-PEER)

The incorporation of engineering practices and core ideas into the Next Generation Science Standards at the elementary school level provides exciting opportunities but also raises important questions about the preparation of new elementary teachers. Both the teacher education and engineering education communities have a limited literature base on the resources that novice elementary teachers bring to learning and teaching engineering. The purpose of this descriptive exploratory research study was to characterize the design practices used by preservice elementary teachers during an integrated engineering and literature experience. Using a modification of the Design Activity Coding Scheme (Atman et al., 2007), we …

High And Low Computer Self-Efficacy Groups And Their Learning Behavior From Self-Regulated Learning Perspective While Engaged In Interactive Learning Modules, Harry B. Santoso, Oenardi Lawanto, Kurt Becker, Ning Fang, Edward M. Reeve

Journal of Pre-College Engineering Education Research (J-PEER)

The purpose of this research was to investigate high school students’ computer self-efficacy (CSE) and learning behavior in a selfregulated learning (SRL) framework while utilizing an interactive learning module. The researcher hypothesizes that CSE is reflected on cognitive actions and metacognitive strategies while the students are engaged with interactive learning modules. Two research questions guided this research: (1) how is students’ CSE while engaged in interactive learning modules? and (2) how do high and low CSE groups plan and monitor their cognitive action, and regulate their monitoring strategies based on their CSE level? The research used a mixedmethods approach to …

Gender Differences In The Consistency Of Middle School Students’ Interest In Engineering And Science Careers, Marsha Ing, Pamela R. Aschbacher, Sherry M. Tsai

Journal of Pre-College Engineering Education Research (J-PEER)

This longitudinal study analyzes survey responses in seventh, eighth, and ninth grade from diverse public school students (n = 482) to explore gender differences in engineering and science career preferences. Females were far more likely to express interest in a science career (31%) than an engineering career (13%), while the reverse was true for males (58% in engineering, 39% in science). After controlling for student and school demographic characteristics, females were as consistent as males in their science career interests during the three years of the study but less consistent in their engineering career interests. Knowing an engineer significantly …

Influence Of Pt:Ru Ratio In Nanotubes Array Structures On The Electrocatalytic Activity Of Methanol Oxidation, Jin-Hua Yuan, Feng-Bin Wang, Xing-Hua Xia

Journal of Electrochemistry

Bimetallic PtRu nanotubes array electrodes (NTAEs) with varied Pt to Ru atomic ratios have been prepared by electrochemical codeposition in 3-aminopropyltri-methoxysilane modified porous anodic alumina (PAA) membranes. The structure and morphology of the catalysts were characterized using X-ray diffraction (XRD) and scanning electron microscopy (SEM), respectively. Electrochemical results showed that the NTAEs with varied atomic ratios could be achieved by controlling the precursor concentration for deposition. The prepared nanoarrays composed of Pt or PtRu alloy promoted the mass-normalized activity toward the sluggish electrooxidation reaction of methanol due to the increased catalytic activity and real surface area, as well as the …

Electrochemistry Of Glucose Oxidase Modified On Porin-Phospholipid Biomimic Membrane, Kun-Qi Wang, Zuo-Ming Zhang, Wei Xing, Chang-Peng Liu, Xing Zhou

Journal of Electrochemistry

Biomimic membrane with nano-channels, which is made up of porin MspA and 1,2-Dimyristoyl-sn-glycero-3-phosphocholine (DMPC) is constructed on glassy carbon substrate, and glucose oxidase (GOD) is modified on it. The direct electrochemical reaction and electrocatalytic behavior to oxygen and glucose of GOD on the GOD/MspA-DMPC/GC electreode are expounded by the cyclic voltammetric method. The study shows that GOD immobilized on porin MspA and DMPC biomimic membrane displays direct and surface-controlled electrochemical reaction nearby formal potential (E0′) of the flavoprotein active centre (FAD/FADH), and the electrochemical reaction contains two electrons and two protons exchange in 0.1 mmol·L^-1 phosphate buffer solution (PBS) …

Effect Of Imidazole Ionic Liquids On The Electro-Oxidation Of P-Methoxy Toluene, Qiong Chen, Ying-Hong Zhu, Ying Zhu, Yan-Fang Li, Chun-An Ma

Journal of Electrochemistry

The interactions between four Imidazole ionic liquids (EMIMBF₄, BMIMBF₄, BMIMHSO₄, BMIMAc) and p-methoxy toluene were investigated by ultraviolet spectroscopy. The red shifts of absorption peak were obviously observed, and the fine structures of the spectroscopy were disappeared on the long wave district. p-MT producing stable excited state was benefit from the interaction with solvent molecules. The electro-oxidation behavious of p-MT were studied in the four ILs on platinum electrode by cyclic voltammetry (CV) and chronoamperometry (CP), and the diffusion coefficients (D) and activation energies (ED) were calculated. The results indicated that the electro-oxidation process …

Review Of Carbon Materials Energy Storage Mechanism In Lead-Carbon Battery, Le-Ying Wang, Hao Zhang, Chen Hu, Shu-Kai Zhang, Hai-Lei Zhao, Gao-Ping Cao, Wen-Feng Zhang, Yu-Sheng Yang, Xiao-Kang Lai

Journal of Electrochemistry

The traditional lead-acid batteries are mainly used for automobile and various internal combustion engine starting, wireless communication base stations and renewable energy storage; however, their negative plates are easily sulfated under partial-state-of-charge duty, then their charging capacity and cycle life are greatly reduced. Lead-carbon battery is a new type of lead-acid battery, in which a carbon material with high specific surface area and conductivity is added into a negative plate, and has excellent rate discharge performance and higher PSoC cycle life. Lead-carbon battery has a good application prospect in energy storage and hybrid electric vehicle, so these years the study …

Determination Of Folic Acid By Composite Film Electrode Modified With Poly-Alizarin Red And Multi-Walled Carbon Nanotubes, Xue-Ping Du, Tong-Fang Lou, Ying Dong, Jian-Ying Qu

Journal of Electrochemistry

The novel modified electrode was fabricated by electropolymerizing alizarin red onto the surface of multi-walled carbon nanotubes on glassy carbon electrode surface, which exhibited good electrocatalytic activity for folic acid. The experimental results showed that the reduction peak current of folic acid at -0.63 V was linear to its concentration over the range of 1.25×10^-6 ~ 4.00×10^-5 mol·L^-1 in the optimized experimental conditions (R = 0.9985). Test for recovery was carried out by standard addition method, and the recovery ratios were in the range of 92.0% ~ 102.0%. The modified electrode was prepared simply with excellent stability, …

Electro-Catalytic Properties Of Β-Pbo2/Sb-Sno2/Ti Electrode On Phenol Oxidation, Peng Li, Yue-Min Zhao, Li-Zhang Wang, Yan-Le Zhang, Zhao-Qing Lu

Journal of Electrochemistry

The combination technology of brush pyrolysis and electroplating was employed in the preparation of β-PbO₂/Sb-SnO₂/Ti electrode. X-ray Diffraction (XRD) and Scanning Electron Microscope (SEM) results showed that the Sb-SnO₂ as an interlayer would restrain the formation of lead fluoride and the crystallization degree on the electrode surface could be as high as 100%. The grain size was calculated by Scherrer formula to be 25.2 nm and the agglomeration of lead dioxide was effectively eliminated. The potential span of diffusion control phase, oxygen evolution potential, Tafel slope for the β-PbO₂/Sb-SnO₂/Ti electrode during …

On The Origin Of The Errors Of IK As Estimated From K-L Equation In Rotating Disk Electrode System, Wei Chen, Ling-Wen Liao, Zheng-Da He, Yan-Xia Chen

Journal of Electrochemistry

Rotating disk electrode system is mainly used to study the kinetics of reactions whose reactants have very low solubility in the electrolyte. For an irreversible reaction, Koutecky-Levich equation (K-L Eq.) is frequently used to deduce the kinetic current i_k). Since K-L Eq. is derived based on the assumption that a system should conform the steady-state diffusion conditions, the data recoded from the actual system which deviates from such a condition, great error may be induced for the i_k estimated. In this work, polarization curves for oxygen reduction reaction at polycrystalline Pt electrode recorded in solutions with various …

Host-Guest Interaction Dictated Selective Adsorption And Fluorescence Quenching Of A Luminescent Lightweight Metal-Organic Framework Toward Liquid Explosives, Dan Liu, Xiaojuan Liu, Yongxin Liu, Yang Yu, Fanglin Chen, Cheng Wang

Faculty Publications

In this article, we report the successful preparation of a Mg-based luminescent MIL-53 metal–organic framework (MOF), namely [Mg2(BDC)2(BPNO)]·2DMF (1) (BDC = 1,4-benzene dicarboxylate, BPNO = 4,4’- dipyridyl-N,N’-dioxide, DMF = N,N-dimethylformamide) in a mixed solvent containing a 2 : 3 volume ratio of DMF and ethanol (EtOH) under solvothermal conditions. Desolvated compound 1a can be used as an absorbent for selective adsorption and separation of liquid explosives, including nitroaromatic (nitrobenzene (NB)) and nitroaliphatic (nitromethane (NM) and nitroethane (NE)) compounds, through single crystal-to-single crystal (SC–SC) transformations. As one of the weakly luminescent MOFs, the luminescence of compound 1a could be quenched by …

Electrochemical And Spectroscopic Studies Of Ethanol Oxidation On Nano-Cubic Pt Modified By Tin Adatoms, Lu Rao, Bin-Wei Zhang, Yan-Yan Li, Yan-Xia Jiang, Shi-Gang Sun

Journal of Electrochemistry

The nano-cubic Pt modified by tin (Sn) was synthesized and used to investigate the role of this adatom played in the ethanol oxidation. The onset potential of ethanol oxidation was significantly shifted negatively which can be forward about 300 mV when the coverage of Sn (θSn)was 0.9. The electrtochemical in situ FTIR result demonstrated that the amount of CO₂ increased first, and then decreased with θSn increased, and reached the maximun when θSn was 0.38. Furthermore, the formation of acetic acid could be observed at very low potential (-0.05 V) after modifying Sn adatom, and the amount of acetic …

Preparation Of Pt/Dna-Mwcnts/Gc Electrode And Its Electrocatalytic Activity Toward H2O2 Reduction, Li-Li Fan, Li-Na Wu, Zhi-Yu Qu, Dan-Feng Liu, Jun-Ming Zhang, Si-Ming Fan, You-Jun Fan

Journal of Electrochemistry

The DNA-multi-walled carbon nanotubes (MWCNTs)/glassy carbon (GC) electrode was prepared by modifying the DNA functionalized MWCNTs composite on a GC electrode. A novel non-enzymatic H₂O₂ sensing electrode was fabricated by electrodepositing Pt nanoparticles on the DNA-MWCNTs/GC electrode. The modified electrodes were characterized by scanning electron microscope (SEM). The response properties of the sensing electrode to H₂O₂ were investigated by cyclic voltammetry and chronoamperometry. The results indicated that the sensing electrode exhibited a good linear relationship between response current and H₂O₂ concentration in the range of 0.04 ~ 18.07 mmol·L^-1 with …

Boosting Electrocatalytic Activity Of Nitrogen-Doped Graphene/Carbon Nanotube Composite For Oxygen Reduction Reaction, Yu Zhang, Jin-Song Hu, Wen-Jie Jiang, Lin Guo, Zi-Dong Wei, Li-Jun Wan

Journal of Electrochemistry

Developing low-cost catalysts with high electrocatalytic activity for oxygen reduction reaction (ORR) has recently attracted much attention because the sluggish ORR currently limits the performance and commercialization of fuel cells and metal-air batteries as well. Nitrogen doped carbon materials have been considered as a promising candidate for the replacement of high-cost and scarce Pt-based catalysts although their electrocatalytic activity still needs to be much improved. In this work, an improved nitrogen-doped graphene/carbon nanotubes composite (N-rGO/CNT) was developed as an efficient ORR electrocatalyst. It was found that the ORR activity of N-rGO/CNT composite could be significantly enhanced by introducing iron in …

Electrochemical Deposition Of Copt Alloy Thin Film And Its Abnormal Infrared Effects, Qing-Song Chen, Guo-Cong Guo, Shi-Gang Sun

Journal of Electrochemistry

Nanostructured CoPt alloy thin film was deposited on glassy carbon substrate (denoted as CoPt/GC) under cyclic voltammetric conditions. SEM studies demonstrated that the CoPt/GC was composed of nonuniform nanoparticles with an average size of 139 nm. The composition of the CoPt/GC was analyzed by energy dispersive X-ray spectroscopy (EDS), which depicts a Co:Pt ratio of ca. 3:5. In situ FTIR spectroscopy employing CO adsorption as a probe reaction revealed that the CoPt/GC exhibits abnormal infrared effects (AIREs). The unique anomalous IR features of CO adsorbed (CO_ad) on CoPt/GC consist in the complete inversion of the CO_ad IR …