Engineering Commons^™

Flexible Mems: A Novel Technology To Fabricate Flexible Sensors And Electronics, Hongen Tu

Wayne State University Dissertations

This dissertation presents the design and fabrication techniques used to fabricate flexible MEMS (Micro Electro Mechanical Systems) devices.

MEMS devices and CMOS(Complementary Metal-Oxide-Semiconductor) circuits are traditionally fabricated on rigid substrates with inorganic semiconductor materials such as Silicon. However, it is highly desirable that functional elements like sensors, actuators or micro fluidic components to be fabricated on flexible substrates for a wide variety of applications. Due to the fact that flexible substrate is temperature sensitive, typically only low temperature materials, such as polymers, metals, and organic semiconductor materials, can be directly fabricated on flexible substrates. A novel technology based on XeF2(xenon …

The Design, Analysis, & Application Of Multi-Modal Real-Time Embedded Systems, Masud Ahmed

Wayne State University Dissertations

For many hand-held computing devices (e.g., smartphones), multiple operational modes are preferred because of their flexibility. In addition to their designated purposes, some of these devices provide a platform for different types of services, which include rendering of high-quality multimedia. Upon such devices, temporal isolation among co-executing applications is very important to ensure that each application receives an acceptable level of quality-of-service. In order to provide strong guarantees on services, multimedia applications and real-time control systems maintain timing constraints in the form of deadlines for recurring tasks. A flexible real-time multi-modal system will ideally provide system designers the option to …

Coupled Sediment Yield And Sediment Transport Model To Support Navigation Planning In Northeast Brazil, Calvin Trebor Creech

Wayne State University Dissertations

Deposition of sediment (shoaling) in commercial waterways is a major obstacle to maintaining sustainable riverine transportation of bulk goods (primarily agricultural and mining commodities). The rate of aggradation of sediment in a waterway is directly related to both the rate of sediment erosion from upland and river bank sources (sediment yield) and the energy in the river to effectively transport the sediment through the waterway system (sediment transport). Historically, methods used for waterway development have included trial and error or rules of thumb associated with river training structures and chute cut-off canals or engineering of navigation locks and dams. More …

Evaluation Of Nozzle Geometry On High Pressure Gasoline Direct Injection Spray Atomization, Mark Shost

Wayne State University Dissertations

This research presents a critical study of injector nozzle geometry on high-pressure Gasoline Direct Injection, GDi, injector spray morphology. The study was conducted with the aid of multi-fluid Volume-of-Fluid, Large-Eddy-Simulation, VOF-LES, method. Alternative nozzle geometries, that are the subject of current interest including varying nozzle hole length to diameter ratio, counter-bore presence and nozzle-hole skew-angle geometry, are studied in detail in order to provide insight into their specific influence on spray plume targeting and jet primary breakup characteristics. A comparison of the simulation results with near-field shadowgraph and Mie scatter imaging as well as phase-contrast x-ray imaging is provided. When …

Development And Human Performance Evaluation Of Control Modes Of An Exo-Skeletal Assistive Robotic Arm (Esara), Umer Khalid

Wayne State University Dissertations

This research was conducted to assist with functional tasks for a targeted group of individuals with spinal cord injury (SCI); with C5 to C7 level of injury relating to upper extremity movement. The specific population was selected as the existing technology was either too expensive, too bulky or was unable to address their needs in regards to upper extremity mobility. In addition, no platforms allowed multimodal control options for customization or provided a methodology for this crucial evaluation. The motivation of this research was to provide a methodology for selecting the appropriate control of an assistive device based on the …

Finite Element Analysis Of Shear Resistant Mechanisms For Biolaminate Interfaces, Matthew Nelms

Electronic Theses and Dissertations

The Alligator gar possesses a flexible dermal armor consisting of overlapping ganoid scales. Each scale is a bilayer hydroxyapatite and collagen-based bio-laminate for protection against predation. The exoskeleton fish scale is comprised of a stiff outer ganoine layer, a characteristic "sawtooth" pattern at the interface and a compliant bone inner layer with all materials exhibiting a decreasing elastic modulus, yield strength and density through the thickness. Experiments on ganoid scales revealed properties such as damage mitigation and energy dissipation that are unique to biological dermal armor. The objective of this investigation is to develop a fundamental understanding of the stress …

Field Tests And Numerical Modeling Of Vehicle Impacts On A Boulder Embedded In Compacted Fill, Lynsey Reese, Tong Qiu, Daniel Linzell, Edward O'Hare, Zoltan Rado

Department of Civil and Environmental Engineering: Faculty Publications

Landscape Vehicular Anti-Ram (LVAR) systems are a group of protective barriers, which are designed using natural materials (e.g., boulders) and have proven to both effectively protect sensitive structures against threats and be aesthetically pleasing. This paper presents two consecutive vehicular crash tests hitting the same single boulder embedded in AASHTO coarse aggregate fill. A LS-DYNA model was developed to simulate the field-scale tests, which were instrumented with high-speed cameras and pressure cells. A readily available truck model from the National Crash Analysis Center was modified and implemented in the LS-DYNA model. The boulder and surrounding soil were modeled using the …

Processing And Characterization Of Continuous Basalt Fiber Reinforced Ceramic Matrix Composites Using Polymer Derived Ceramics, Sarah Cox

Electronic Theses and Dissertations

The need for high performance vehicles in the aerospace industry requires materials which can withstand high loads and high temperatures. New developments in launch pads and infrastructure must also be made to handle this intense environment with lightweight, reusable, structural materials. By using more functional materials, better performance can be seen in the launch environment, and launch vehicle designs which have not been previously used can be considered. The development of high temperature structural composite materials has been very limited due to the high cost of the materials and the processing needed. Polymer matrix composites can be used for temperatures …

Non-Oxide Porous Ceramics From Polymer Precursor, Xueping Yang

Electronic Theses and Dissertations

Non-oxide porous ceramics exhibit many unique and superior properties, such as better high-temperature stability, improved chemical inertness/corrosive resistance, as well as wide band-gap semiconducting behavior, which lead to numerous potential applications in catalysis, high temperature electronic and photonic devices, and micro-electromechanical systems. Currently, most mesoporous non-oxide ceramics (e.g. SiC) are formed by two-step templating methods, which are hard to adjust the pore sizes, and require a harmful etching step or a high temperature treatment to remove the templates. In this dissertation, we report a novel technique for synthesizing hierarchically mesoporous non-oxide SiC ceramic from a block copolymer precursor. The copolymer …

Photonic Filtering For Applications In Microwave Generation And Metrology, Marcus Bagnell

Electronic Theses and Dissertations

This work uses the photonic filtering properties of Fabry-Perot etalons to show improvements in the electrical signals created upon photodetection of the optical signal. First, a method of delay measurement is described which uses multi-heterodyne detection to find correlations in white light signals at 20 km of delay to sub millimeter resolution. By filtering incoming white light with a Fabry-Perot etalon, the pseudo periodic signal is suitable for measurement by combining and photodetecting it with an optical frequency comb. In this way, optical data from a large bandwidth can be downconverted and sampled on low frequency electronics. Second, a high …

A Program Manager's Dilemma: Measuring The Effect On Performance Of Different Visual Modalities In Mixed Reality Aerial Door Gunnery, Jonathan Stevens

Electronic Theses and Dissertations

The United States Army continues to develop new and effective ways to use simulation for training. One example is the Non-Rated Crew Member Manned Module (NCM3), a simulator designed to train helicopter crewmembers in critical, high risk tasks such as crew coordination, flight, aerial gunnery, hoist and sling load related tasks. The goal of this study was to evaluate visual modalities' effect on performance in mixed reality aerial door gunnery. There is a strong belief in the United States Army that the greater the degree of immersion in a virtual simulation, the more effective that simulation is. However, little scientific …

Parity-Time And Supersymmetry In Optics, Mohammad Ali Miri

Electronic Theses and Dissertations

Symmetry plays a crucial role in exploring the laws of nature. By exploiting some of the underlying analogies between the mathematical formalism of quantum mechanics and that of electrodynamics, in this dissertation we show that optics can provide a fertile ground for studying, observing, and utilizing some of the peculiar symmetries that are currently out of reach in other areas of physics. In particular, in this work, we investigate two important classes of symmetries, parity-time symmetry (PT) and supersymmetry (SUSY), within the context of classical optics. The presence of PT symmetry can lead to entirely real spectra in non-Hermitian systems. …

Combustion Visualization And Particulate Matter Emission Of A Gdi Engine By Using Gasoline And E85, Po-I Lee

Wayne State University Dissertations

In order to increase engine efficiency as well as to reduce emission, optimizing combustion is always the challenge in research and product development. Gasoline direct injection (GDI) engines have been popularized due to its higher power density, fuel efficiency, and the possibility for advanced engine technologies over conventional port-fuel-injection (PFI) gasoline engines. However, many issues are heavily investigated, such as air-fuel mixing preparation, fuel wall-wetting, higher HC and PM emissions, catalytic convertor efficiency, knocking, and pre-ignition. Besides, advanced technologies represent higher production cost.

Because of the limited resource of petroleum-based fuels, ethanol is deemed as the alternative fuel for gasoline …

Visualizing Interior And Exterior Jet Aircraft Noise, Manmohan Singh Moondra

Wayne State University Dissertations

In today's competitive aerospace industry, the quest for quiet has drawn significant attention to both the interior and exterior design of an airplane. Understanding the noise generation mechanisms of a jet aircraft is a crucial first step toward developing the most cost-effective noise and vibrations abatement methods. In this investigation, the Helmholtz Equation Least Squares (HELS) based nearfield acoustic holography will be used to understand noise transmission caused by jet engine and turbulence into the fuselage of a jet aircraft cruising at 30,000 ft.

Modern propulsive jet engines produce exterior noise sources with a high amplitude noise field and complicated …

Three-Dimensional Numerical Modeling Of Multiple-Sized Sediment Transport Modeling Under Current And Waves, Qianru Lin

Electronic Theses and Dissertations

In this study, a three-dimensional numerical model of multiple-sized sediment transport under current and waves is developed. The coastal circulations are described by a three-dimensional hydrodynamic model, which is governed by the three-dimensional phase-averaged shallow water flow equations coupled with wave radiation stresses. Methods are also developed to determine the bed shear stress due to current only, waves only, and coexistence of current and waves, accounting for the nonlinear interaction of the current and waves on bed shear stresses. Meanwhile, empirical formulas for bed-load transport capacity, suspended-load transport capacity, and near-bed suspended-load concentration under current and waves are established for …

High-Strain Rate Tensile Characterization Of Graphite Platelet Reinforced Vinyl Ester Based Nanocomposites Using Split-Hopkinson Pressure Bar, Brahmananda Pramanik

Electronic Theses and Dissertations

The dynamic response of exfoliated graphite nanoplatelet (xGnP) reinforced and carboxyl terminated butadiene nitrile (CTBN) toughened vinyl ester based nanocomposites are characterized under both dynamic tensile and compressive loading. Dynamic direct tensile tests are performed applying the reverse impact Split Hopkinson Pressure Bar (SHPB) technique. The specimen geometry for tensile test is parametrically optimized by Finite Element Analysis (FEA) using ANSYS Mechanical APDL®. Uniform stress distribution within the specimen gage length has been verified using high-speed digital photography. The on-specimen strain gage installation is substituted by a non-contact Laser Occlusion Expansion Gage (LOEG) technique for infinitesimal dynamic tensile strain measurements. …

Critical Analysis Of Transmitarray Antenna Design, Ahmed H. Abdelrahman

Electronic Theses and Dissertations

In recent years, transmitarray antenna concept attracts growing interests of many scientists in the antenna area. It combines the favorable features of the lens antenna that are based on optical theory and the microstrip arrays that are based on array theory, leading to a low profile design with high gain, high radiation efficiency, and flexible radiation performance. Transmitarrays are now emerging as a new generation of high-gain antennas for long-distance communications. In this dissertation, comprehensive analysis, new methodologies, and novel designs of transmitarray antennas are presented. * detailed analysis of the design of planar space fed array antennas is presented. …

Evaluation Of Cotton Valley "D" Sand Production In Stampede Field, Mississippi, U.S.A., Patrick Lawrence Murphy

Electronic Theses and Dissertations

No abstract provided.

Evolution Of Data Creation, Management, Publication, And Curation In The Research Process, Lisa Zilinski, Darcy Bullock, Deborah Horton, David Scherer, Courtney E. Matthews

Libraries Faculty and Staff Presentations

Sharing research data and scholarship is of national importance due to the increased focus on maximizing return on the government’s investment in research programs. Recent policy changes have directly affected the management and accessibility of publically-funded research. On January 18, 2011 the National Science Foundation (NSF) required data management plans to be submitted with all grant proposals. On February 22, 2013, the Office of Science and Technology Policy of the President of the United States extended a similar requirement to all federal agencies with research and development budgets of more than $100 million. These requirements illustrate the need for further …

A Cross-Case Analysis Of Disciplinary Identities Communicated Through Design Reviews, Senay Purzer, Nicholas D. Fila, Emily C. Dick

Design Thinking Research Symposium

In post-secondary educational settings, discourse is a mechanism by which students develop occupational identities as they engage in a particular community that communicates attributes of their prospective profession. This study focuses on revealing disciplinary identities and how they are conveyed and negotiated during interactions between design students and project reviewers. We draw upon Gee’s identity framework and focus on the enactments of disciplinary identity in three different disciplinary settings: choreography, industrial design, and mechanical engineering. A cross-case analysis indicated differences that were epistemological (e.g., subjectivity of reviews) and similarities in ways instructors modeled institutional identities. The results have implications for …

Freeze Thaw Durability Of Internally Cured Concrete Made Using Superabsorbent Polymers, Wesley A. Jones, W. Jason Weiss

International Conference on Durability of Concrete Structures

The use of superabsorbent polymers (SAPs) to produce internally cured concrete has been shown to be effective in reducing the potential for restrained shrinkage cracking of high performance concrete mixtures. However, not much is known regarding the freeze–thaw durability of concrete mixtures that incorporate SAPs for internal curing (IC). When SAP particles desorb (or partially desorb) the “water” (pore fluid) they contain for the purposes of IC, some believe that the void space created by these particles can provide enough empty voids to accommodate the additional volume caused by water expansion upon freezing. This paper investigates the freeze–thaw durability of …

Learning And Becoming In Design Reviews, Lisa D. Mcnair, Marie C. Paretti, Cassandra Groen

Design Thinking Research Symposium

Drawing from the prior work of McNair and Paretti (2010), this study investigates how language practices and design artifacts mediate the interactions among novice and expert designers to shape the nature of design, and specifically design learning. By analyzing data collected from two design courses in different fields, this study addresses two research questions: 1) how do language practices mediate the interactions between design mentors and design learners; and 2) how do design artifacts mediate these interactions between mentors and learners? Drawing on activity theory and discourse analysis, we use these questions to explore how students work with experts to …

Influence Of Organic Inhibitor On Corrosion Resistance Of Steel In Simulated Concrete Pore Solution, Jingshun S. Cai, C. C. Chen, J. Z. Liu, J. P. Liu

International Conference on Durability of Concrete Structures

Organic corrosion inhibitor is one of lower cost technologies that limit the deterioration of concrete structures. The influence of a newly prepared organic corrosion inhibitor on the corrosion behavior of carbon steel in simulated concrete pore solution was investigated by polarization curves, electrochemical impedance spectroscopy, and so on. The effect of organic corrosion inhibitors on concrete working performance was also studied. The results show that the corrosion rate decreases with the concentration of inhibitor increase; when the content of inhibitor up to 1.5% versus water, the oxide film was completely passive. Organic corrosion inhibitor had no effect on work performance.

Joint Deterioration In Concrete Pavements, Parth Panchmatia, Jan Olek, Nancy Whiting

International Conference on Durability of Concrete Structures

Concrete pavements located in cold climates have been experiencing premature joint deterioration. Entrapment of moisture in the joints saturates the surrounding concrete, rendering it susceptible to freeze-thaw damage. To identify and to isolate the variables that might be causing this localized deterioration, concrete cores were obtained from deteriorated and non-deteriorated sections of US 35, SR 38 and SR 3 located near Indianapolis, Indiana and I-94 (located near Michigan City, Indiana). The visual evaluation of the condition of the pavement revealed that the drainage of the joints contributes significantly to their performance. Specifically, all deteriorated joint core holes drained poorly when …

Painted Rumble Stripes: Alternatives To Raised Pavement Markers (Rpms), Thomas M. Brennan Jr, Stuart R. Mikey, Darcy M. Bullock

JTRP Posters

This poster highlights research completed by the Joint Transportation Research Program (JTRP) led by Darcy Bullock, Lyles School of Civil Engineering, Purdue University, for JTRP Project SPR-3528, "Alternatives to Raised Pavement Markers (RPMs)." The poster includes photos taken at a construction site on State Road 25 located near Shadeland, Indiana. The top photo demonstrates how the center line corrected a driver when snow covered to avoid oncoming traffic. Photo was taken on US 231 near Country Road 800 in Tippecanoe County.

2013-14 Indiana Interstate Mobility Summary, Steve M. Remias, Howell Li, Darcy M. Bullock

JTRP Posters

These posters highlight the speed and mobility metrics on four of Indiana’s interstates (I-94, I-65, I-465, and I-70). The posters are part of the effort by the Indiana Department of Transportation to characterize mobility concerns on the statewide interstate system.

Application Of Neural Network For Concrete Carbonation Depth Prediction, Daming Luo, Ditao Niu, Zhenping Dong

International Conference on Durability of Concrete Structures

Concrete carbonation is one of the most significant causes of deterioration of reinforced concrete structures in atmospheric environment. However, current models based on the laboratory tests cannot predict carbonation depth accurately. In this paper, the BP neural network is optimized by the particle swarm optimization (PSO) algorithm to establish the model of the length of the partial carbonation zone for concrete. After simulation training, the improved model is applied to a concrete bridge for carbonation depth prediction. The results show that the improved model, which has faster a convergence rate, has a good ability in predicting the length of the …

Co2 Sequestration In Cement-Based Materials During Mixing Process Using Carbonated Water And Gaseous Co2, Jacek Kwasny, P. A. Muhammed Basheer, Mark I. Russell, William Doherty, Kieran Owens, Neil Ward

International Conference on Durability of Concrete Structures

This paper presents selected findings from a recently completed research project, aimed at the investigation of CO₂ sequestration in cement-based materials during the early stages of hydration when the cement paste is being mixed. Portland cement pastes were carbonated during the mixing process, using both carbonated water and gaseous CO₂, and their properties were compared to the control non-carbonated mix. All mixes were prepared in a purpose-designed chamber that permitted carbonated water and gaseous CO₂ to be mixed with the cementbased materials during the mixing process, without losses of CO₂ to the external environment. Temperature …

Experimental Study On Carbonation Of Steel Fiber Reinforced Concrete, Yan Wang, Ditao Niu, Zhenping Dong

International Conference on Durability of Concrete Structures

With the steel fiber reinforced concrete (SFRC) used more and more widely in some large-span structures, large tunnel linings, dam structures, military engineering, and some other major projects, its durability arouses more and more concerns. In this paper carbonation test of SFRC was conducted. The rule for the mixing amount of steel fiber (0, 0.5, 1.0, 1.5, and 2.0%) to affect the carbonation depth of concrete and the strength developing rule of SFRC after carbonation test were researched. To analyze the property change rules from micro perspective of SFRC after carbonation, the pore structure of SFRC after carbonation was tested. …

Striping Truck Utilization Project, Jon R. Padfield, James Handy

JTRP Posters

This poster highlights research completed by the Joint Transportation Research Program (JTRP) led by Jon Padfield and James Handy, Purdue University for JTRP project SPR-3722, “Striping Truck Utilization for Crawfordsville and Greenfield District.” This poster highlights the transformation of striping trucks at both districts using Value Stream Mapping (VSM) through the Technical Assistance Program.