Engineering Commons^™

Evaluation Of Phb Mid-Street Crossing System In Las Vegas, Nevada - Pedestrian Perspectives, Anna Eapen

UNLV Theses, Dissertations, Professional Papers, and Capstones

As the U.S. population ages and as more people choose to walk, it is critical to improve pedestrian safety. One of the best ways to encourage both pedestrians and vehicle drivers to behave safer is to make use of the most effective engineering traffic control systems. One such new technology is the Pedestrian Hybrid Beacon System (PHB), formerly known as the High-intensity Activated crosswalk (HAWK), a pedestrian-activated traffic-warning device. It features immediate activation of traffic warning lights from a dark state, a pedestrian countdown timer, and shorter pedestrian crossing times and traffic stoppage times compared to a traditional midblock traffic …

Ore Classification And Breccia Formation In The 144 Zone Gold Deposit: A Chemical Replacement Model, Bare Mountain Range, Nevada, William Thomas Fischer

UNLV Theses, Dissertations, Professional Papers, and Capstones

The 144 Zone is an oxidized, breccia-hosted, disseminated gold deposit that formed along the contact between Early Cambrian Carrara Formation limestone and overlying Bonanza King Formation dolomite within the Bare Mountain range in southern Nevada. Gold mineralization occurs within a breccia body that contains a variety of breccia types. Research goals of this project included classifying clay, oxide and other minerals as well as breccia types to identify the habits of gold mineralization and the minerals associated with gold. Research was also aimed at determining the paragenesis of Au mineralization and brecciation in the 144 Zone. Underground mapping provided spatial …

Design And Implementation Of An Instruction Set Architecture And An Instruction Execution Unit For The Rez9 Coprocessor System, Daniel Spencer Anderson

UNLV Theses, Dissertations, Professional Papers, and Capstones

While the use of RNS has provided groundbreaking theory and progress in this field, the applications still lack viable testing platforms to test and verify the theory. This Thesis outlines the processing of developing an instruction set architecture (ISA) and an instruction execution unit (IEU) to help make the first residue based general processor a viable testing platform to address the mentioned problems.

Consider a 32-bit ripple adder. The delay on this device will be 32N where N is the delay for each adder to complete its operation. The delay of this process is due to the need to propagate …

Mitigation Of Moving Shocks In An Expanding Duct, Veraun Chipman

UNLV Theses, Dissertations, Professional Papers, and Capstones

Inviscid flow theory governs the bulk motion of a gas at some distance away from the walls (i.e. outside the boundary layer). That is to say, there are no viscous forces in the bulk flow, which is modeled using the Euler equations. The Euler equations are simply the Navier-Stokes equations with zero viscosity terms. An ideal inviscid fluid, when brought into contact with a surface or wall, would naturally slip right past it since the fluid has no viscosity. In real life, however, a thin boundary layer forms between the wall or surface and the bulk flow. Shock wave boundary …

Induction Of Differentiation Of Dental Pulp-Derived Mesenchymal Stem Cells (Dpsc), Aubrey Young

UNLV Theses, Dissertations, Professional Papers, and Capstones

Mesenchymal stem cells are derived from a variety of human tissues and are being bioengineered and studied for possible uses in the advancement of medicine. Recent efforts are being focused on Dental Pulp Stem Cells (DPSC's) due to the accessibility of this tissue. Many factors influence DPSC quality and quantity, including the specific methods used to isolate, collect, concentrate, and store these isolates once they are removed. Ancillary factors, such as the choice of media, the selection of early versus late passage cells, and cryopreservation techniques may also influence the differentiation potential and proliferative capacity of DPSC isolates.

The objective …

Exact Controllability Of The Lazer-Mckenna Suspension Bridge Equation, Lanxuan Yu

UNLV Theses, Dissertations, Professional Papers, and Capstones

It is well known that suspension bridges may display certain oscillations under external aerodynamic forces. Since the collapse of the Tacoma Narrows suspension bridge in 1940, suspension bridge models have been studied by many researchers. Based upon the fundamental nonlinearity in suspension bridges that the stays connecting the supporting cables and the roadbed resist expansion, but do not resist compression, new models describing oscillations in suspension bridges have been developed by Lazer and McKenna [Lazer and McKenna (1990)]. Except for a paper by Leiva [Leiva (2005)], there have been very few work on controls of the Lazer-McKenna suspension bridge models …

Lateral-Torsional Buckling Capacity Of Tapered-Flange Moment Frame Shapes, Leah O'Neill

Theses and Dissertations

While moment frames are a popular lateral-force resisting system, their constant cross-section can lead to inefficiencies in energy absorption and stiffness. By tapering the flange width linearly toward the center of the beam length, the energy absorption efficiency can be increased, leading to a better elastic response from the beam and more elastic stiffness per pound of steel used. Lateral-torsional buckling is an important failure mode to be considered for tapered-flange moment frame shapes. No closed-form or finite element solutions have yet been developed for tapered-flange I-beams with a non-uniform, linear moment gradient and intermediate bracing conditions. In this study, …

Full-Scale Testing Of Blast-Induced Liquefaction Downdrag On Auger-Cast Piles In Sand, Joseph Erick Hollenbaugh

Theses and Dissertations

Deep foundations like auger-cast piles and drilled shafts frequently extend through liquefiable sand layers and bear on non-liquefiable layers at depth. When liquefaction occurs, the skin friction on the shaft decreases to zero, and then increases again as the pore water pressure dissipates and the layer begins to settle, or compact. As the effective stress increases and the liquefiable layer settles, along with the overlaying layers, negative skin from the soil acts on the shaft. To investigate the loss of skin friction and the development of negative skin friction, soil-induced load was measured in three instrumented, full-scale auger-cast piles after …

Smooth Muscle Cell Organization In The Stem Region Of The Gracilis Collateral Circulation In Balb/C Mice, Laura Lenae Burckhardt

Biomedical Engineering

Of the approximately 8 million Americans who suffer from ischemic peripheral arterial occlusive disease (PAOD), many present with intermittent claudication, or pain associated with exercise. Impaired vasodilation of resistance vessels is a potential explanation for this symptom. Occluded arteries can lead to increased flow through collateral vessels, which function as natural bypasses around the obstruction. This increase in blood flow and resulting shear stress can cause outward remodeling, or arteriogenesis, which improves the efficacy of collaterals. However, following femoral artery ligation in a mouse model of chronic ischemia, vasodilation in the stem region of collateral vessels is impaired at day …

Gis-Based Route Risk Assessment Of Hazardous Material Transport, Myungwoo Lee

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

The transportation of hazardous materials keeps increasing across the United States due to the growing consumption of goods and rising need for manufactured materials. Furthermore, concerns are mounting over the safe surface transportation of hazardous materials. Highways and rails are the most common modes of transport for hazardous materials, although the risk posed from highway transport of hazardous materials may be higher due to the fact that highways are public while rails are mostly private. The majority of hazardous material cargo is carried on the highway network by trucks. Due to possible adverse effects on human and animal populations in …

Low Molecular Weight Glucosamine/L-Lactide Copolymers As Potential Carriers For The Development Of A Sustained Rifampicin Release System: Mycobacterium Smegmatis As A Tuberculosis Model, Jorge Ragusa

Department of Chemical and Biomolecular Engineering: Dissertations, Theses, and Student Research

Tuberculosis, a highly contagious disease, ranks as the second leading cause of death from an infectious disease, and remains a major global health problem. In 2013, 9 million new cases were diagnosed and 1.5 million people died worldwide from tuberculosis. This dissertation aims at developing a new, ultrafine particle-based efficient antibiotic delivery system for the treatment of tuberculosis. The carrier material to make the rifampicin (RIF)-loaded particles is a low molecular weight star-shaped polymer produced from glucosamine (molecular core building unit) and L-lactide (GluN-LLA). Stable particles with a very high 50% drug loading capacity were made via electrohydrodynamic atomization. Prolonged …

Microstructure And Magnetic Behavior Studies Of Processing-Controlled And Composition-Modified Fe–Ni And Mn–Al Alloys, Yunlong Geng

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

L1₀-type (Space group P4/mmm) magnetic compounds, including FeNi and MnAl, possess promising technical magnetic properties of both high magnetization and large magnetocrystalline anisotropy energy, and thus offer potential in replacing rare earth permanent magnets in some applications.

In equiatomic Fe-Ni, the disorder-order transformation from fcc structure to the L1₀ structure is a diffusional transformation, but is inhibited by the low ordering temperature. The transformation could be enhanced through the creation of vacancies. Thus, mechanical alloying was employed to generate more open-volume defects. A decrease in grain size and concomitant increase in grain boundary area resulted from …

Two-Dimensional Scalar Differential Equations For Transversely Varying Thickness Modes In Piezoelectric Plates And Applications In Acoustic Wave Resonator Sensors, Huijing He

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

Generalizations are made for three types of well-known and widely used twodimensional scalar differential equations in the literature describing transversely varying thickness modes in piezoelectric plate resonators. They are for singly-rotated quartz plates, doubly-rotated quartz plates, and plates of crystals of class 6mm with the c-axis along the plate thickness, respectively. The purpose of the generalizations is to include the effects of surface mechanical loads such as mass layers or fluids for resonator -based acoustic wave sensor applications. Surface acoustic impedance is introduced to take into account various surface loads in a general manner for time-harmonic motions. Both unelectroded and …

A Phase-Locked Loop In High-Temperature Silicon Carbide And General Design Methods For Silicon Carbide Integrated Circuits, Paul Shepherd

Graduate Theses and Dissertations

Silicon carbide (SiC) has long been considered for integrated circuits (ICs). It offers several advantages, including wider temperature range, larger critical electric field, and greater radiation immunity with respect to Silicon (Si). At the same time, it suffers from challenges in fabrication consistency and lower transconductance which the designer must overcome. One of the recent SiC IC processes developed is the Raytheon High-Temperature Silicon Carbide (HTSiC) complementary MOSFET process. This process is one of the first to offer P channel MOSFETs and, as a result, a greater variety of circuits can be built in it.

The behavior of SiC MOSFETs …

Design Of System Level Control For A Residential Power Router, Fahad Hossain

Graduate Theses and Dissertations

This thesis presents the overall power flow and load management system for a 2 kW residential power router. The objective is to satisfy the residential load demand with cost savings by managing the energy sources including PV, battery, generator, and grid. The power flow management system algorithm is developed both for grid-connected mode and island mode. This algorithm involves the battery state of charge estimation, available PV power, load demand and electricity grid pricing. The residential load management algorithm is also developed using PV power prediction and load power prediction acquired for a day.¬ A Labview GUI is also developed …

Development Of A Novel Device For The Perfusion Driven Decellularization Of Skeletal Muscle, Benjamin Kasukonis

Graduate Theses and Dissertations

Decellularization of skeletal muscle is a process that removes cellular components of skeletal muscle tissue while leaving behind the intact extracellular matrix (ECM). Skeletal muscle ECM is currently being studied as a biologic scaffold for repairing volumetric muscle loss (VML) because the removal of cells greatly reduces the antigenicity of the donor tissue. Decellularization usually relies on passive diffusion of detergents, surfactants and/or osmotic solutions to strip cells from the ECM. However, passive diffusion alone is usually not sufficient for complete removal of cells from the interior of large pieces of skeletal muscle using detergents, such as sodium dodecyl sulfate …

Design, Simulation And Implementation Of Three-Phase Bidirectional Dc-Dc Dual Active Bridge Converter Using Sic Mosfets, Tariq Aldawsari

Graduate Theses and Dissertations

The use of SiC-based martials in fabricating power semiconductor devices has shown more interest than conventional silicon-based. Its promising abilities to improve the performance of power electronic systems made it a valuable choice in building high power DC-DC converters. This thesis presents the design and implementation of a three-phase bidirectional DC-DC Dual Active Bridge using SiC MOSFETs. The proposed circuit is first built in Matlab for simulation analysis. Then a phase shift modulation controller is designed in Simulink to test the simulation circuit. The controls are then integrated through an FPGA to test the prototype. Simulations and experimental results are …

Integration Of Energy Storage Into A Future Energy System With A High Penetration Of Distributed Photovoltaic Generation, Arthur K. Barnes

Graduate Theses and Dissertations

Energy storage units (ESU) are increasingly used in electrical distribution systems because they can perform many functions compared with traditional equipment. These include peak shaving, voltage regulation, frequency regulation, provision of spinning reserve, and aiding integration of renewable generation by mitigating the effects of intermittency.

As is the case with other equipment on electric distribution systems, it is necessary to follow appropriate methodologies in order to ensure that ESU are installed in a cost-effective manner and their benefits are realized. However, the necessary methodologies for integration of ESU have not kept pace with developments in both ESU and distribution systems. …

Potential For Optical Sensor-Based Nitrogen Fertilization In Grain Sorghum (Sorghum Bicolor L. Moench) In Arkansas, Kamil H. Rosales Rodriguez

Graduate Theses and Dissertations

Ground-based active-optical (GBAO) crop sensors have become an effective tool to improve nitrogen (N) use efficiency and to predict yield early in the growing season, particularly for grass crops. Commercially available canopy sensors calculate the normalized difference vegetative index (NDVI) by emitting light in the red and near infrared range of the electromagnetic spectrum. The NDVI is used to evaluate vigor status and to estimate yield potential. However, few studies have been conducted to compare the performance of commercially available sensors. Therefore, a study was conducted using the most common crop canopy sensors: i) N-Tech's GreenSeeker^TM (GS), ii) Holland …

Truckload Shipment Planning And Procurement, Neo Nguyen

Graduate Theses and Dissertations

This dissertation presents three issues encountered by a shipper in the context of truckload transportation. In all of the studies, we utilize optimization techniques to model and solve the problems. Each study is inspired from the real world and much of the data used in the experiments is real data or representative of real data.

The first topic is about the freight consolidation in truckload transportation. We integrate it with a purchase incentive program to increase truckload utilization and maximize profit. The second topic is about supporting decision making collaboration among departments of a manufacturer. It is a bi-objective optimization …

Designing And Implementing A Micro-Controller Based Primary-Side Sensing Flyback Converter For Leds Driver, Nam Nhat Tran

Graduate Theses and Dissertations

The fast development of LED and its applications has enabled a new generation of lighting device with higher efficiency and long lifespan. By employing a primary-side sensing flyback converter and the PIC18F micro-controller series, an LED driver could achieve two important features: (1) the compatibility with the available lighting fixtures, and (2) reducing unit price. The flyback converter was chosen for its simplicity, competitive low cost, and its ability to provide a constant output current, a necessarily important factor to an LED driver. Meanwhile, the PIC18F micro-controller series offer numerous advanced features which include but not limited to pulse-width modulation …

Data Transport System, Rahav Dor

All Computer Science and Engineering Research

To facilitate the WU Smart Home research [21] we built a system that collects data from sensors and uploads the data to the cloud. The system supports data collection from multiple locations (typically apartments) that are independent from each other, endowing the system with two benefit: distributed data collection and alleviating privacy concerns. Each location is managed by a local micro-server (μServer) that is responsible for receiving data packets from sensors and managing their transient storage. Periodically the μServer triggers a data transport process that moves the data to a cloud server where it is stored in a centralized database. …

Holographic-Based Leaky Wave Antennas And Phonon-Enhanced Waveguides For Infrared Applications, Franklin Muriuki Manene

Theses and Dissertations

This work contributes to critical requirements for antenna-coupled detection applications: 1) large capture cross section with design control of angular response and 2) long propagation lengths of complex signals. Antenna-coupled detectors for infrared applications provide appreciable capture cross sections while delivering signals to sub-wavelength-sized detectors. In this work, leaky-wave antennas are considered for the first time in the infrared spectrum. Design characterization of angular radiation patterns as well as polarization is presented. While leaky-wave antennas hold great promise for enhancing capture cross section, thus narrowing the field of view of the detector, there is a parallel need to preserve coherent …

Second Order-Response Surface Model For The Automated Parameter Tuning Problem, Aldy Gunawan, Hoong Chuin Lau

Research Collection School Of Computing and Information Systems

Several automated parameter tuning procedures/configurators have been proposed in order to find the best parameter setting for a target algorithm. These configurators can generally be classified into model-free and model-based approaches. We introduce a recent approach which is based on the hybridization of both approaches. It combines the Design of Experiments (DOE) and Response Surface Methodology (RSM) with prevailing model-free techniques. DOE is mainly used for determining the importance of parameters. A First Order-RSM is initially employed to define the promising region for the important parameters. A Second Order-RSM is then built to approximate the center point as well as …

Homogenous Ensemble Phonotactic Language Recognition Based On Svm Supervector Reconstruction, Wei-Wei Liu, Wei-Qiang Zhang, Michael T. Johnson, Jia Liu

Electrical and Computer Engineering Faculty Research and Publications

Currently, acoustic spoken language recognition (SLR) and phonotactic SLR systems are widely used language recognition systems. To achieve better performance, researchers combine multiple subsystems with the results often much better than a single SLR system. Phonotactic SLR subsystems may vary in the acoustic features vectors or include multiple language-specific phone recognizers and different acoustic models. These methods achieve good performance but usually compute at high computational cost. In this paper, a new diversification for phonotactic language recognition systems is proposed using vector space models by support vector machine (SVM) supervector reconstruction (SSR). In this architecture, the subsystems share the same …

A Variable-Stiffness Compliant Mechanism For Stiffness-Controlled Haptic Interfaces, Jeffrey C. Hawks

Theses and Dissertations

In this research a variable-stiffness compliant mechanism was developed to generate variable force-displacement profiles at the mechanisms coupler point. The mechanism is based on a compliant Roberts straight-line mechanism, and the stiffness is varied by changing the effective length of the compliant links with an actuated slider. The variable-stiffness mechanism was used in a one-degree-of-freedom haptic interface to demonstrate the effectiveness of varying the stiffness of a compliant mechanism. Unlike traditional haptic interfaces, in which the force is controlled using motors and rigid links, the haptic interface developed in this work displays haptic stiffness via the variable-stiffness compliant mechanism. The …

Lateral Resistance Of Piles Near Vertical Mse Abutment Walls, Cody Hatch

Theses and Dissertations

A full scale MSE wall was constructed and piles were driven at various distances behind the wall. Lateral load testing was conducted and the performance of the pile, wall, and reinforcement were measured. The piles were 12.75 inch pipe piles, and the wall was reinforced with welded wire grid reinforcement. The objective of the testing was to characterize the relationship between the lateral pile resistance and the distance of the pile behind the back face of the MSE wall. Load-displacement curves are presented for the piles located behind the wall at 66 inches (5.3 diameters), 55 inches (4.3 diameters), 41 …

Magnetic Holding Of Synthetic Quartz For Precision Grinding, Saudin Basic

Theses and Dissertations

The objective of this research work is to investigate the practicality of magnetic workholding of non-magnetic synthetic quartz during high-speed grinding. This research work is sponsored by Quartzdyne and will be used as the starting point to applying single-piece rounding of its quartz. Hypotheses were created that would permit the authors to conclude that magnets are in fact worthwhile workholders for non-magnetic materials. Designs of Experiments were used to reject or fail to reject the null hypotheses. Experiments were carried out using a custom HAAS lathe, modified into a grinding center with an NSK live spindle, and neodymium-iron-boron magnets used …

Analysis, Validation, And Improvement Of High-Resolution Wind Estimates From The Advanced Scatterometer (Ascat), Jeffrey Richard Blodgett

Theses and Dissertations

The standard L2B ocean wind product from the Advanced Scatterometer (ASCAT) is retrieved as a 25 km product on a 12.5 km grid. Ultra-high resolution (UHR) processing allows ASCAT wind retrieval on a high-resolution 1.25 km grid. Ideally, such a high-resolution sample grid provides wind information down to a 2.5 km scale, allowing better analysis of winds with high spatial variability such as those in near-coastal regions and storms. Though the wind field is sampled on a finer grid, the actual data resolution needs to be validated. This thesis provides an analysis and validation of ASCAT UHR wind estimates in …

B1 Mapping For Magnetic Resonance Imaging, Daniel Joseph Park

Theses and Dissertations

Magnetic Resonance Imaging (MRI) is a non-ionizing form of medical imaging which has practical uses in diagnosing, characterizing, and studying diseases in vivo. Current clinical practice utilizes a highly trained radiologist to view MR images and qualitatively diagnose, characterize, or study a disease. There is no easy way to compare qualitative data. That is why developing quantitative measures in MRI show promise. Quantitative measures of disease can be compared across a population, MRI sites, and over time. Osteoarthritis is one disease where those who have it may benefit from the development of quantitative MRI measures. Those benefits may include earlier …