Engineering Commons^™

Next Generation Rfid Telemetry Design For Biomedical Implants., Andre Johan Faul

Electronic Theses and Dissertations

The design and development of a Radio Frequency Identification (RFID) based pressure-sensing system to increase the range of current Intra-Ocular Pressure (IOP) sensing systems is described in this dissertation. A large number of current systems use near-field inductive coupling for the transfer of energy and data, which limits the operational range to only a few centimeters and does not allow for continuous monitoring of pressure. Increasing the powering range of the telemetry system will offer the possibility of continuous monitoring since the reader can be attached to a waist belt or put on a night stand when sleeping. The system …

Enhancement Of Anaerobic Digestion Of Actual Industrial Wastewaters : Reactor Stability And Kinetic Modeling., Mahyar Ghorbanian

Electronic Theses and Dissertations

Industrial plants pay disposal costs for discharging their wastewater that can contain pollutants, toxic organics and inorganics, to the sewer based on the Biological Oxygen Demand (BOD) or Chemical Oxygen Demand (COD) of the streams. It has become increasingly expensive for industry to meet stringent regulatory standards. One solution to reduce this cost is to anaerobically degrade the COD content, which in turn generates useful methane gas that can be used to generate useful energy or heat. Anaerobic Digestion (AD) is one of the most suitable renewable resources of conversion of industrial wastewaters to bioenergy, but it is not widely …

Forecasting Seasonal Hydrologic Response In Major River Basins., A. M. Tanvir Hossain Bhuiyan

Electronic Theses and Dissertations

Seasonal precipitation variation due to natural climate variation influences stream flow and the apparent frequency and severity of extreme hydrological conditions such as flood and drought. To study hydrologic response and understand the occurrence of extreme hydrological events, the relevant forcing variables must be identified. This study attempts to assess and quantify the historical occurrence and context of extreme hydrologic flow events and quantify the relation between relevant climate variables. Once identified, the flow data and climate variables are evaluated to identify the primary relationship indicators of hydrologic extreme event occurrence. Existing studies focus on developing basin-scale forecasting techniques based …

Predictions Of Nox Emissions In Pulverized Coal Combustion., Niko Hachenberg 1981-

Electronic Theses and Dissertations

The purpose of this research work was to develop a transferable mathematically simple model which gives the possibility to make fast and easy predictions regarding the NOx emission behavior of a broad–spectrum of coals within a certain combustion environment. In this context, this thesis is a further step of a common ongoing investigation focused on predicting NOx emissions from self–sustaining, pulverized coal combustion in dry bottom firing systems. A comprehensive literature research focused on already published NOx prediction approaches from scientific publications based on fundamental quantitative relationships or empirical algorithms and statistical relationships was also carried out in this context. …

Early Detection And Control Of Potential Pandemics., Shengpeng Jin

Electronic Theses and Dissertations

Over the centuries, human beings have been inflicted with a variety of contagious diseases, resulting in tens of millions of respiratory illnesses and deaths worldwide. Early detection of disease spread facilitates timely responses that can greatly reduce its impact on a population. Therefore, this early information is a major public health objective and is crucial for policy makers and public health officials responsible for protecting the public from the spread of contagious diseases. Current indicators of the spread of contagious outbreaks lag behind its actual spread, leaving no time for a planned response. The studies of Christakis et al. in …

Implications Of Additive Manufacturing On Complexity Management Within Supply Chains In A Production Environment., Andre Kieviet

Electronic Theses and Dissertations

This dissertation focuses on developing a generic framework for using additive manufacturing as an appropriate production method to address the management of complexity in supply chains. While several drivers such as changing customer demand patterns and intensifying global competition increase product complexity, the available number of product variants and related processes within the supply chain itself increase costs and dilute scale effects. Several concepts and tools like mass customization, modularization, and product platforms have been developed in the past decades, but most of them focus on the product structure. Currently, there is no comprehensive tool set developed in the field …

A Heuristic Algorithm For Determining The Part Set In A Powder-Bed Additive Manufacturing Machine., Sonja Dieder

Electronic Theses and Dissertations

The goal of this research is to develop a procedure for the placement of a priority part into a planned build in a powder-bed additive manufacturing machine. Toward that goal, a heuristic procedure was developed that seeks to maximize the revenue in a scheduled build, subject to due-date constraints; i.e., all parts with the closest due date will not only be included in the build, but will be placed near the bottom of the build. Likewise, any part in the scheduled build that does not have an immediate due date is a candidate for removal in order to accommodate a …

Simulation Model For Optimization Of A Landside Harbor Logistic Chain Of Container Terminals., Klaus Striegel

Electronic Theses and Dissertations

The world wide transportation of all kind of goods with containers is a fast growing business. The challenge is to transport in the shortest time to the lowest cost. The vessels therefore become bigger and bigger. The biggest vessel with 16000 TEU is since December 2012 in service. But the next generation with 18000-22000 TEU is already being built. This raises questions in acceleration of loading and unloading process, the handling in the yards of the harbors and the transportation of the containers to Hinterland. The most common way is still to transport the container from the yard by truck, …

4d Reduced Te (Rte) Spiral Phase Contrast Nri For Rapid Quantification And Visualization Of Blood Flow And Hemodynamics., Mohammadjavad Negahdar

Electronic Theses and Dissertations

4D flow Phase Contrast MRI is a relatively new technique in MRI which is capable of deriving time-resolved three-dimensional velocity fields in a 3D volume noninvasively. 4D flow imaging is a 3D k-space acquisition where for the third dimension, an additional phase-encoding step is required. The velocity field can then be used to obtain flow waveform, wall shear stress, vascular compliance, blood pressure, and other hemodynamic information. A significant limitation of 4D flow methods has been the requisite long scan times, requiring the patient to remain motionless at times on the order of 10-20 minutes, depending on scan parameters. The …

Monitoring Hospital Safety Climate Using Control Charts Of Non-Harm Events In Reporting Systems, Susan Robinson

All Theses

The primary aim of this thesis is to design an approach and demonstrate a methodology to supplement safety culture assessment efforts. The framework affords an enhanced understanding of hospital safety climate, specifically reporting culture, through the use of control charts to monitor non-harm patient safety events documented in reporting systems. Assessing safety culture and climate remains difficult. One of the most common methods to assess safety culture is a self-report survey administered annually. Surveys assess safety climate, because they are a snapshot of the management's and front-line staff's perceptions of safety within their settings. One component of safety culture is …

Lateral Dynamics Of Multiple Trailer Trucks In Windy Environments, David Wafer

All Theses

The lateral response of three-trailer commercial vehicles has been assessed using the simulation package TruckSim^TM. Aerodynamic and mechanical characterizations for the vehicle were developed for this investigation. Simulations were carried out with various aerodynamic and load configurations with several different arbitrarily defined crosswinds. The aerodynamic configurations were tested in constant and random crosswinds. The load configurations were tested only in random crosswinds. Each aerodynamic configuration differed by the aerodynamic side-force coefficient for the trailers. Each load configuration consisted of reducing the payload in a single trailer. The tractor was identically defined for each load and aerodynamic configuration. Increasing …

The Effect Of Decorative Foil Stamping On Consumer Attention, Julianne Holmes

All Theses

Packaging plays a key role in communicating product benefits to consumers at the point of sale (Rundh, 2009). Oftentimes, designers use high visibility enhancements to help the package stand out among competitors. Although luxury products often use high-end graphic techniques to convey high quality product, many private label package designers are also using these enhancements to attract attention to their products. Foil stamping is a high visibility enhancement that can create a rich and elegant effect on a package. The process involves transferring a thin layer of foil onto a substrate by using pressure and heat. No quantitative research has …

Electric Power Synchrophasor Network Cyber Security Vulnerabilities, Christopher Beasley

All Theses

Smart grid technologies such as synchrophasor devices (Phasor Measurement Units (PMUs)), make real-time monitoring, control, and analysis of the electric power grid possible. PMUs measure voltage and current phasors across the electrical power grid, add a GPS time stamps to measurements, and sends reports to the Phasor Data Concentrators (PDCs) in the control centers. Reports are used to make decisions about the condition and state of the power grid. Since this approach relies on Internet Protocol (IP) network infrastructure, possible cybersecurity vulnerabilities have to be addressed to ensure that it is stable, secure, and reliable. In literature, attacks that are …

Process Capability In A Computer Integrated Manufacturing Cell, Andrew Austin

Masters Theses & Specialist Projects

With the rise of automation in traditional manufacturing processes, more companies are beginning to integrate computer integrated manufacturing (CIM) cells on their production floors. Through CIM cell integration, companies have the ability to reduce process time and increase production. One of the problems created with CIM cell automation is caused by the dependency the sequential steps have on one another. Dependency created by the previous step increases the probability that a process error could occur due to previous variation. One way to eliminate this dependency is through the use of an in-process measuring device such as a Renishaw spindle probe …

Prostate Cancer Detection Using Combined Autofluorescence And Light Reflectance Spectroscopy: Ex Vivo Study Of Human Prostates, Vikrant Sharma, Ephrem O. Olweny, Payal Kapur, Jeffrey A. Cadeddu, Claus G. Roehrborn, Hanli Liu

Bioengineering Faculty Publications - Archive

This study was conducted to evaluate the capability of detecting prostate cancer (PCa) using auto-fluorescence lifetime spectroscopy (AFLS) and light reflectance spectroscopy (LRS). AFLS used excitation at 447 nm with four emission wavelengths (532, 562, 632, and 684 nm), where their lifetimes and weights were analyzed using a double exponent model. LRS was measured between 500 and 840 nm and analyzed by a quantitative model to determine hemoglobin concentrations and light scattering. Both AFLS and LRS were taken on n = 724 distinct locations from both prostate capsular (nc = 185) and parenchymal (np = 539) tissues, including PCa tissue, …

Classification And Quantification Of Phenotypic Characteristics Of Normal And Dysplastic Oral Cells, Jackson W. Boice

Biomedical Engineering Undergraduate Honors Theses

Introduction Oral cancer accounts for 2.5% of all cancer cases in the United States. The 5 year survival rate or stage 1 or localized oral cancer is 82%, and the survival rate of unstaged oral cancer is only 50%; therefore, early diagnosis is key. Current clinical practices for determining malignancy of tissue include physical examination and surgical biopsy, which can be plagued by high variability between observers and are invasive for the patient. Proflavine intercalates between base pairs of nucleic acids and has excitation and emission peaks at 455 (+/- 20) nm and 515 nm respectively; therefore, it can be …

Optimizing In Vitro Extracellular Matrix Production Using Polymer Scaffolds With Targeted Pore Size, Addison M. Walker

Biomedical Engineering Undergraduate Honors Theses

Extracellular matrix (ECM) has been shown to provide the framework needed for healthy tissue to grow after experiencing an injury. The optimization of growing ECM is a pressing concern in the tissue regeneration field. From prior research, an in vitro approach for harvesting ECM has been created using polyurethane (PU) foams seeded with cells. Our approach aimed at discovering if the pore size of the foams increased the amount of recovered ECM. Scaffolds of targeted pore size were created by separating sugar granules using a sieve, packing the sugar into a cylindrical mold, then pouring PU over the sugar. Three …

Chemical And Hydrodynamic Mechanisms For Long-Term Geological Carbon Storage, Susan J. Altman, Wen Deng, For Full List Of Authors, See Publisher's Website.

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Geological storage of CO₂ (GCS), also referred to as carbon sequestration, is a critical component for decreasing anthropogenic CO₂ atmospheric emissions. Stored CO₂ will exist as a supercritical phase, most likely in deep, saline, sedimentary reservoirs. Research at the Center for Frontiers of Subsurface Energy Security (CFSES), a Department of Energy, Energy Frontier Research Center, provides insights into the storage process. The integration of pore-scale experiments, molecular dynamics simulations, and study of natural analogue sites has enabled understanding of the efficacy of capillary, solubility, and dissolution trapping of CO₂ for GCS. Molecular dynamics simulations provide insight on relative wetting of …

Acuta Enews May 2014 Vol. 43, No. 5

ACUTA Newsletters

In this Issue...

State of the ResNef Report

Stream Annual Conference 2014

Annual Dues Invoices Mailed

What's Next for Net Neutrality?

Key lssues for Compliance with FCC Signal Booster Rules

Big Data: A Tool, Not an Answer

ACUTA Seeking Presenters for Fall Seminar in Boston

Info Links

Thanks to Exhibitors and Sponsors

Check It Out

Investigation Of Warm Mix Asphalt Overlays And Geosynthetic Pavement Interlayers, William Bolger

All Theses

Geosynthetics play an ever increasing role in enhancing pavements. The construction of asphalt overlays with geosynthetic interlayers is a common method to rehabilitate flexible and rigid pavements. Geosynthetic interlayers provide numerous benefits to a pavement system. When utilized properly, geosynthetic interlayers can prevent water from infiltrating a roadway base and can extend the life of a pavement and assist in absorbing stresses. Geoysnthetics lead to an increase in a pavement overlay's performance and also retard reflective cracking. Warm mix asphalt has become more popular as a result of the search for more sustainable construction practices. WMA and its technologies are …

Models For Incorporating Block Scheduling In Blood Drive Staffing Problems, Yulong Su

Industrial Engineering Undergraduate Honors Theses

The purpose of this research is to develop decision support models that can be used by the American Red Cross (ARC) to schedule blood drives with improved shifts for the phlebotomists that staff them. Currently, phlebotomists work inconsistent hours and the ARC believes this is a leading cause of high turnover rates they are experiencing. For example, phlebotomists sometimes staff a blood drive until 11 PM one night and will have to work another at 8 AM the next morning. Assigning phlebotomists more consistent shifts in blocks of time will definitely improve their work schedule. Before switching to block scheduling, …

Uncertainty In Relief Supply Distribution, Christopher A. Bayles

Industrial Engineering Undergraduate Honors Theses

In the aftermath of a natural disaster the efficient planning of humanitarian relief efforts, e.g., delivering supplies to locations in need, can often mean the difference between lives being saved and lives being lost. In this paper we focus on two things: (1) appropriate objectives for routing problems in the context of delivery of relief supplies, and (2) how to handle the uncertainty associated with delivery of relief supplies after a disaster. Through applying uncertainty to parameters such as travel time between locations, we seek to examine if/how optimal routes change as a result of different objectives and the presence …

Inverse Problems Using Reduced Basis Method, Phil Gralla

All Theses

Inverse Problems is a field of great interest for many applications, such as parameter identification and image reconstruction. The underlying models of inverse problems in many applications often involve Partial Differential Equations (PDEs). A Reduced Basis (RB) method for solving PDE based inverse problems is introduced in this thesis. The RB has been rigorously established as an efficient approach for solving PDEs in recent years. In this work, we investigate whether the RB method can be used as a regularization for solving ill-posed and nonlinear inverse problems using iterative methods. We rigorously analyze the RB method and prove convergence of …

Life (Logical Ios Forensics Examiner): An Open Source Ios Backup Forensics Examination Tool, Ibrahim Baggili, Shadi Al Awawdeh, Jason Moore

Electrical & Computer Engineering and Computer Science Faculty Publications

In this paper, we present LiFE (Logical iOS Forensics Examiner), an open source iOS backup forensics examination tool. This tool helps both researchers and practitioners alike in both understanding the backup structures of iOS devices and forensically examining iOS backups. The tool is currently capable of parsing device information, call history, voice messages, GPS locations, conversations, notes, images, address books, calendar entries, SMS messages, Aux locations, facebook data and e-mails. The tool consists of both a manual interface (where the user is able to manually examine the backup structures) and an automated examination interface (where the tool pulls out evidence …

Effect Of Stitch Density On Fatigue Characteristics And Damage Mechanisms Of Stitched Carbon/Epoxy Composites, Arief Yudhanto, Naoyuki Watanabe, Yutaka Iwahori, Hikaru Hoshi

Mechanical and Aerospace Engineering Faculty Research & Creative Works

The effect of stitch density (SD) on fatigue life, stiffness degradation and fatigue damage mechanisms in carbon/epoxy (T800SC/XNRH6813) stitched using Vectran thread is presented in this paper. Moderately stitched composite (SD = 0.028/mm²; 'stitched 6 x 6') and densely stitched composite (SD = 0.111/mm²; 'stitched 3 x 3') are tested and compared with composite without stitch thread (SD = 0.0; 'unstitched'). The experiments show that the fatigue life of stitched 3 x 3 is moderately better than that of unstitched and stitched 6 x 6. Stitched 3 x 3 pattern is also able to postpone the …

How Imbalanced Excitation And Inhibition May Cause Low Entropy Brain Dynamics, Qusay Redwan Alfaori

Biomedical Engineering Undergraduate Honors Theses

To study the effect of the imbalance of excitation and inhibition neurons on brain entropy using a computer model of a brain. The brain model will be composed of a neural network and entropy of the neural network will be measured quantitatively. Entropy in this context quantifies how many different patterns of activated neurons the brain can create. Imbalance between excitation and inhibition neurons causes the brain to malfunction, which can be an underlying cause of autism.

5ht And The 5ht Receptors- Relevance To Cardiac Valve Disease, Christopher Ryan Martindale

Biomedical Engineering Undergraduate Honors Theses

Recent studies have revealed that elevated levels of serotonin or 5HT lead to valve dysfunction. A mouse model was successfully established to investigate the effects on the aortic valve in subjects with elevated 5HT levels along with cardiovascular hypertension. For each two-week trial, eight C57BL/6J mice were divided into the following expermental groups: control, 5HT, angiotensin II, and 5HT+angiotensin II. The drug was delivered to the mice via osmotic pumps (Ang II: 0.4ng/g/min, 5HT:0.0025ng/g/min) or direct injections(Ang II: 0.1 mg, 5HT: 2.12 mg, every other day) and the blood pressure of the mice was continually monitored via the CODA tail …

Evaluation Of Turbidity Reduction Using Polyacrylamide With Linear Sediment Control Best Management Practices, Jacob O. Burkey

All Theses

Accelerated erosion and highly turbid stormwater runoff from construction sites are known to cause a variety of environmental and economic problems. To reduce turbidity and keep eroded sediment on site, this research was conducted to evaluate the potential for turbidity reduction using polyacrylamide (PAM) flocculants with sediment control best management practices (BMPs).

Previous research has shown significant turbidity reduction when applying granular PAM to linear sediment control BMPs. Numerous studies indicate that PAM loses efficacy if it becomes wet and then dries. This makes PAM reapplication a necessary part of maintaining sediment control BMPs using PAM and suggests that further …

Flexoelectricity And Ferroelectric Domain Wall Structures: Phase-Field Modeling And Dft Calculations, Yijia Gu, Menglei Li, Anna N. Morozovska, Yi Wang, Eugene A. Eliseev, For Full List Of Authors, See Publisher's Website.

Materials Science and Engineering Faculty Research & Creative Works

We show that flexoelectric effect is responsible for the non-Ising character of a 180° ferroelectric domain wall. The wall, long considered being of Ising type, contains both Bloch- and Néel-type polarization components. Using the example of classic ferroelectric BaTiO3, and by incorporating the flexoelectric effect into a phase-field model, it is demonstrated that the flexoelectric effect arising from stress inhomogeneity around the domain wall leads to the additional Bloch and Néel polarization components. The magnitudes of these additional components are two or three magnitudes smaller than the Ising component, and they are determined by the competing depolarization and flexoelectric fields. …

Multilayer Nanomagnetic Systems For Information Processing, Srinath Rajaram

USF Tampa Graduate Theses and Dissertations

The Spin-Transfer Torque Magnetoresistive Random Access Memory (STT-MRAM) has opened new doors as an emerging technology with high potential to replace traditional CMOS-based memory technology. This has come true due to the density, speed and non- volatility that have been demonstrated. The STT-MRAM uses Magnetic Tunnel Junction (MTJ) elements as non-volatile memory storage devices because of the recent discovery of spin-torque phenomenon for switching the magnetization states. The magnetization of the free layer in STT-MRAM can be switched from logic "1" to logic "0" by the use of a spin-transfer torque. However, the STT-MRAMs have till now only been used …