Engineering Commons^™

F-Transform Enhancement Of The Sampling Theorem And Reconstruction Of Noisy Signals, Michal Holčapek, Irina Perfilieva, Vladik Kreinovich

Departmental Technical Reports (CS)

According to a sampling theorem, any band-limited and continuous signal can be uniquely reconstructed from certain of its values. We show that a reconstruction can be obtained from the set of F-transform components and moreover, the sampling theorem follows as a particular case. A special attention is paid to the case where sample values of a signal come with noise. We show that in the presence of noise, a more accurate reconstruction than that based on the sampling theorem can be obtained, if instead of noised sample values the F- transform components of the signal with respect to a generalized …

Utilizing Mobile Health Technology At The Bottom Of The Pyramid, Sarah E. Oerther, Phalakshi Manjrekar, Daniel B. Oerther

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Among the Millennium Development Goals, MDG 5 Maternal Health has as its dual objectives: (a) reduce by three quarters the maternal mortality ratio; and (b) achieve universal access to reproductive health. Existing maternal health survey instruments were evaluated, modified, adapted, and used to assess perceptions and practices by mothers in villages located in the state of Gujarat in western India as well as women residing in urban Mumbai (formerly Bombay). Women who had recently given birth were asked a series of questions regarding maternal attitudes and behaviors before, during, and shortly after pregnancy including basic health data (i.e., height and …

A Review Of Steel Content Taught In U.S. University Construction Management Programs, Jeremy Miles Thompson

All Graduate Plan B and other Reports, Spring 1920 to Spring 2023

Throughout the rocky mountain region there are 18 universities that offer a bachelor’s degree in Construction Management (CM). Only two of those universities, Colorado State University and Brigham Young University Idaho, offer an in-depth course on the application of steel in the construction industry. The other universities offer structures courses that teach only the basics of steel in the construction industry, like how to calculate loads using steel beams and columns.

Ua66 Ogden College Of Science & Engineering Newsletter, Cheryl Stevens, Dean

Ogden College of Science & Engineering Publications

No abstract provided.

System Safety Principles: A Multidisciplinary Engineering Perspective, Joseph Saleh, Karen Marais, Francesca Favaro

Faculty Publications

System safety is of particular importance for many industries. Broadly speaking, it refers to the state or objective of striving to sustainably ensure accident prevention through actions on multiple safety levers (technical, organizational, and regulatory). While complementary to risk analysis, it is distinct in one important way: risk analysis is anticipatory rationality examining the possibility of adverse events (or accident scenarios), and the tools of risk analysis support and in some cases quantify various aspects of this analysis effort. The end-objective of risk analysis is to help identify and prioritize risks, inform risk management, and support risk communication. These tools …

Fundamental Studies Of Vortices Induced By A Vortex-Generator For Automotive Applications, Asiful Islam, Graham Doig

Aerospace Engineering

For automotive applications, passive flow control devices can be used to reduce, delay or prevent flow separation. This study explores the nature of vortex generation and behaviour, numerically and experimentally, for a simple geometry at a Reynolds Number (Rex) of 5×105 and 1.945×106. The setup comprised a triangular vane vortex-generator mounted on a shallow ramp referenced from literature. Flow over the isolated ramp was validated with past experimental particle-image-velocimetry (PIV) data, which also highlighted the relative performance of various turbulence models. A parametric study was undertaken with the vane orientation defined by an angle-of-attack (β) and stream-wise location (xedge/xVG). These …

Application Of Kriging To Motorsport Aerodynamic Analysis, Matthew Cruickshank, Graham Doig

Aerospace Engineering

Aerodynamic analysis in motorsport is conducted using three methods, computational, scaled experimental and full-scale operational. However, the varying fidelity, different sampling resolutions and unavoidable errors of each technique make valid comparisons between datasets from each method difficult and time consuming. Kriging is a geostatistical method to estimate values within a data field by examining and applying the trends of the dataset. This research examines how such techniques can be used to aid comparison between aerodynamic measurements of a race car. It examines how kriging can be used to transform discrete measurements, of varying fidelity and sampling resolution, into semi-continuous measurements, …

Computational Simulation Of An Altitude Adaptive Nozzle Concept, K. Schomberg, G. Doig, J. Olsen

Aerospace Engineering

A computational analysis of an annular converging-diverging (CD) and an altitude adaptive expansion-deflection (ED) nozzle is presented. Numerical results were generated using a 2D axisymmetric, pressure-coupled solver in conjunction with the Spalart-Allmaras turbulence closure model and second order spatial discretisation schemes. Results were recorded over a theoretical altitude range and compared to experimental static pressure readings and schlieren images. The correlation between numerical and experimental static pressure values was high for all cases. Comparison of schlieren imagery outlined the large variety of flow regions within the ED nozzle flow field. The interactions between these regions were highly sensitive to turbulence …

The Aerodynamics Of A Cornering Inverted Wing In Ground Effect, James Keogh, Graham Doig, Tracie J. Barber, Sammy Diasinos

Aerospace Engineering

For racing car configurations an inverted wing produces negative lift that allows increased levels of acceleration to be maintained through corners. Routine aerodynamic analysis, however, will typically be in the straight-line condition. A numerical analysis of the inverted T026 wing geometry through the curved path of a constant radius corner was conducted. The asymmetrical properties of the oncoming flow resulted in the introduction of a rolling and yawing moment along the span, as well as side-force. Yaw angle, flow curvature and a velocity gradient resulted in changes to the pressure distribution over the wing surface. Primary vortex behaviour was observed …

Developing A Tool For Generation Of Operational Amplifier Models From Datasheet Parameters, Benjamin Riley Sissons

Electrical Engineering Undergraduate Honors Theses

Due to their flexibility and usefulness operational amplifiers are a very common circuit component that has been in use for over fifty years. Because of their widespread use in circuits there has always been a need for simulation models of the op amp. The purpose of this thesis is to demonstrate the design a tool for use with the modeling software ModLyng that takes several parameters from the datasheet of an op amp and generates a model that can be exported to several popular hardware description languages including Verilog-A and Verilog-AMS. The tool was designed as a plugin for ModLyng …

Dark Silicon Aware Multicore Systems: Employing Design Automation With Architectural Insight, Jason M. Allred, Sanghamitra Roy, Koushik Chakraborty

Electrical and Computer Engineering Faculty Publications

The emergence of dark silicon - a fundamental design constraint absent in past generations - brings intriguing challenges and opportunities to microprocessor design. In this brief, we demonstrate the challenges of comparing competing design styles across different technology generations in a dark silicon era. We provide a new metric to guide a dark silicon aware (DSA) system design and propose a stochastic optimization algorithm for DSA multicore system design. Our technique shows 11%-58% and 5.7-5.8 times improvement in energy efficiency for forthcoming technology generations with two multicore design styles: cores with various voltage-frequency domains and cores with heterogeneous microarchitectures. © …

Pressure Recorders: Low-Cost, Robust, Low-Battery-Use Field Measurement Techniques For Trending Water Pressure, Stuart Styles, Kerilyn Ambrosini

BioResource and Agricultural Engineering

Water users across California need robust, low-cost water level/pressure sensors with integrated data loggers for a high level of precision and accuracy. The Cal Poly Irrigation Training and Research Center (ITRC) has installed Telog Instruments devices in California and Nevada over the last 12 years to provide a performance review of the devices. The two devices focused on were the Telog Instruments WLS-31 Level Tracker and LPR-31i Line Pressure Recorder. Over the study period, ITRC has collected several sets of data in varying situations. After 11 years of use on a reservoir, the two Telog WLS-31 units had a 1% …

Implementation Of New Irrigation Protocols On Strawberry Transplants On The California Central Coast, Stuart Styles, Kerilyn Ambrosini

BioResource and Agricultural Engineering

For the past five growing seasons, the Cal Poly Irrigation Training and Research Center (ITRC) has conducted research on water use, salinity levels and various other factors related to strawberry transplant establishment. This report summarizes research that can be found online: www.itrc.org/projects.htm.

The project’s goal was to develop an analysis of irrigation practices of the strawberry growers on the central coast of California, primarily during the establishment of transplants. From the analysis, sprinkler use reduction methods were developed. These methods conserve water, save pumping costs, and reduce the runoff that can potentially contaminate local waterways. California growers contributed control and …

Reading And Wirelessly Sending Eeg Signals Using Arduinos And Xbee Radios To Control A Robot, Andrew Paul Simms

Electrical Engineering Undergraduate Honors Theses

The objective of this project is to develop an EEG device that can read brainwaves from an individual, analyze the data, and use the result to send a wireless signal using Arduinos and XBee Radios to a Boe-bot to perform an action. One of the goals of this project is to read EEG data with a higher sampling frequency than a previously manufactured EEG device. The second part of the project used the device developed to differentiate an individual’s thinking between right and left and then send a simple signal to a robot using an XBee radio to perform an …

Transmission Of Stereo Audio Signals With Lasers, William Austin Curbow

Electrical Engineering Undergraduate Honors Theses

An alternative method for transmitting audio signals via the use of laser technology was presented here. The primary focus of this document is on the audio amplifier subsystem including the design, simulation, and performance results. Simulations using the PSPICE computer simulation software were utilized to investigate the theoretical designs of the audio amplifier subsystem. The audio amplifier was examined in three junctures including the noise-canceling input stage, the high voltage gain cell, and the low impedance driver. Through the design procedure using theoretical calculations, simulations using PSPICE computer software, and examination of the finished product with an oscilloscope, the audio …

The Synthesis And Characterization Of Copper Indium Sulfide And Cadmium Selenide Nanocrystals And Their Applications In Photodetectors, Zachary T. Bever

Electrical Engineering Undergraduate Honors Theses

Semiconductor nanocrystals are a topic of much interest in electrical engineering. Their use has been explored for many applications. This paper investigates the synthesis and characterization of CuInS2 and CdSe nanocrystals. As the nanocrystals were left in reaction for increasing amounts of time, the bandgap of the material decreased as the nanocrystal size increased due to the quantum confinement effect. The CdSe nanocrystals were then investigated in a photodetector application which achieved a detectivity on the order of 10^9 cmHz^(1/2)W^(-1).

Reducing Ambiguities In Customer Requirements Through Historical Rule-Based Knowledge In A Small Organization, Silvia Brum Preston

Dissertations

During the elicitation process the requirements for a software application are obtained from the customer. Customers often do not know how to clearly express the requirements of the application to be built, causing requirements to be ambiguous. Many studies have been found to cover different characteristics of the requirements elicitation process including methods for reducing ambiguities in requirements. The methods and findings of these studies were found to be too general when it comes to the specific domain of the requirements and knowledge about the requirements. In addition, some studies did not take into consideration the level of expertise of …

Utilizing Structural Equation Modeling In The Development Of A Standardized Intervention Assessment Tool, L. E. Voth-Gaeddert, Daniel B. Oerther

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

There are numerous approaches to measuring multidimensional poverty; these include the Human Development Index and the Multidimensional Poverty Index among others [1]. However, a gap in the literature is found when intervention assessment tools are investigated. The idea of creating a standardized assessment tool would allow for a deeper understanding of poverty on a per community basis. Structural Equation Modeling (SEM) offers a robust platform in which to establish such a tool. An overview of SEM and several other general approaches to data aggregation are addressed. The notion of a standardized intervention assessment tool is discussed; this is focused on …

Influence Of Different Rubber Modified Binder Variables On Performance Properties Of Porous Asphalt Mixtures, Katelyn Love

All Theses

Porous asphalt is a type of pavement in which surface water can permeate down into the subbase below. Open graded friction course (OGFC) is a type of porous asphalt often used as a surface course on top of dense graded pavements on high speed roadways. Due to an increase in waste tires, rubber modified asphalt has become an increasingly popular material around the world, including the US. The rubber modified asphalt is created by utilizing processed rubber particles blended into the mixture. This research investigated the effects of rubber modified binder on the performance of porous asphalt by evaluating the …

In Vitro Validation Of Patient-Specific Hemodynamic Simulations In Coronary Aneurysms Caused By Kawasaki Disease, Ethan Kung, Andrew M. Kahn, Jane C. Burns, Alison Marsden

Publications

To perform experimental validation of computational fluid dynamics (CFD) applied to patient specific coronary aneurysm anatomy of Kawasaki disease. We quantified hemodynamics in a patient-specific coronary artery aneurysm physical phantom under physiologic rest and exercise flow conditions. Using phase contrast MRI (PCMRI), we acquired 3-component flow velocity at two slice locations in the aneurysms. We then performed numerical simulations with the same geometry and inflow conditions, and performed qualitative and quantitative comparisons of velocities between experimental measurements and simulation results. We observed excellent qualitative agreement in flow pattern features. The quantitative spatially and temporally varying differences in velocity between PCMRI …

Upel Students Recognized By Ece Department | Utah State University Power Electronics Lab, Usu College Of Engineering

College of Engineering News

Chandler Austin and Kevin Kennedy were recently recognized by the ECE department for academic excellence.

Upel Students Awarded Best Poster At Apec 2014 | Utah State University Power Electronics Lab, Usu College Of Engineering

College of Engineering News

UPEL AMPED team published a paper, titled ‘Active balancing system for electric vehicles with incorporated low voltage bus’, at APEC, the annual conference for Applied Power Electronics and Exposition. AMPED team comprises graduate students Muhammad Muneeb, Kelly Hathaway, Post-doc researcher Michael Evzelman, and Prof. Regan Zane. The work highlights research in control of power converters associated with the battery management system (BMS) in order to improve battery pack lifetime and reduce cost and weight. This paper presented an architecture that uses modular dc-dc bypass converters to perform active battery cell balancing and to supply current to auxiliary loads, eliminating the …

Investigating Antibiotic Resistance Levels Of Salmonella Internalized In Lettuce Leaves, Jason B. Thomas

McNair Scholars Research Journal

Contamination of food crops by the human pathogen Salmonella is a food safety threat worldwide. Though using treated wastewater for irrigation is a sustainable practice, it may introduce trace levels of Salmonella that may contaminate food crops. Salmonella could develop resistance to antibiotics present in wastewater. The overall goal of the project is to increase the understanding of the public health risk associated with the use of treated wastewater to irrigate food crops. The objective of this particular study is to determine the antibiotic resistance level of Salmonella internalized in lettuce leaves. In this experiment, thirty-six plants of the lettuce …

Design And Implementation Of A Real-Time Adaptive Oxygen Transfer Rate Estimator, Li Wang

All Theses

Oxygen transfer rate (OTR) is the most signicant signal for aerobic bioprocess control, since most microbic metabolic activity relies on oxygen consumption. However, accurate estimation of OTR is challenging due to the difficulty of determining uncertain oxygen transfer parameters and system dynamics. This paper presents an adaptive estimator, which incorporates exhaust gas, stir speed and dissolved oxygen measurements, to predict the real-time OTR. The design of this estimator takes into account the headspace dilution effect, off-gas sensor dynamics and uncertain oxygen transfer parameters. Accurate and real-time OTR signal is derived by combining the low latency property of stir speed and …

An Exploration Of The Factors That Motivate Gifted And Talented Black Males To Engage In Science, Technology, Engineering And Mathematics In A Gifted, Residential Community, Adrienne L. Coleman

Publications & Research

This study was an exploration of the factors that motivated gifted and talented Black males to engage in science, technology, engineering and mathematics (STEM). The specific problem addressed was the lack of motivation among Black males to become gifted and talented learners engaged in STEM. Thus, the purpose of this study was to examine the factors that motivate gifted and talented Black males to engage in STEM at the Illinois Mathematics and Science Academy (IMSA), a residential academy for gifted/talented students. Qualitative methodology was used to interview focus groups of 20 gifted and talented Black males who currently attended IMSA …

A Comparison And Evaluation Of Different Dynamic Characterization Approaches For Bridges, Juan Javier Torres Torres Goitia

Graduate Theses and Dissertations

The objective of this thesis was to compare different dynamic characterization approaches for full scale bridge structures to devise a rapid and reliable Structural Health Monitoring (SHM) program in the aftermath of a natural or manmade hazard. Present methods for structural condition evaluation of bridge structures rely heavily on on-site visual inspections of each structure by specially trained engineers and technicians. It has been proved in the literature that this current method is subjective, time consuming and manpower intensive, all of which are not suited for the critical conditions following a hazard event. This study focused on comparing three different …

Comparing Ferrous Chloride And Ferrous Sulfate As Secondary Coagulants At The Beaver Water District Drinking Water Treatment Plant, Jenny Doyle

Graduate Theses and Dissertations

In November 2012, the Beaver Water District (BWD) switched primary oxidants from free chlorine to chlorine dioxide (ClO2) to curb formation of trihalomethanes, a regulated group of organic disinfection byproducts (DBPs). Because ClO2 is reduced to chlorite (ClO2-), a regulated inorganic DBP, BWD incorporated ferrous salt into their coagulation regime to quench chlorite to chloride. In this study, two ferrous salts - ferrous chloride (FC) and ferrous sulfate (FS) - were compared as secondary coagulants in combination with alum, the primary coagulant. Ferrous salts were dosed stoichiometrically to reduce chlorite and alum was dosed at percentages (0-100%) relative to a …

Cost-Benefit Analyses For Load Resistance Factor Design (Lrfd) Of Drilled Shafts In Arkansas, Sarah Michelle Bey

Graduate Theses and Dissertations

To achieve more cost efficient transportation infrastructure within the state of Arkansas, a series of cost-benefit analyses were performed. The analyses, specifically developed for load resistance factor design (LRFD) designed drilled shaft foundations, were designed to compare the fiscal impacts of the drilling and sampling, in-field and laboratory testing, full-scale load testing, and concrete mixing techniques utilized by the University of Arkansas (UofA), the Arkansas Highway and Transportation Department (AHTD), and the Missouri Department of Transportation (MODOT). The methodologies were compared at three test site locations within the state of Arkansas: Siloam Springs, AR, Turrell, AR, and Monticello, AR. These …

Global Dynamic Characterization And Load Rating Of Bridge Structures Utilizing Economical Dynamic Excitation Devices, Eric Fernstrom

Graduate Theses and Dissertations

Experimental modal analysis (EMA) of bridges and other civil structures can be used to acquire quantitative data describing their condition, and enhance opportunities for structural health monitoring and related fields. The use of EMA on civil structures has been limited by the high cost of the excitation devices that are required for the best data quality. The objective of the research reported herein is to evaluate a low-cost excitation system for multiple-input, multiple-output (MIMO) EMA, enabling the production of accurate estimates of the global behavior of in-service bridges.

The prototype excitation system is composed of consumer entertainment devices, namely tactile …

Rapid Condition Assessment Of Bridges By Falling Weight Deflectometer, Jeremy David Rawn

Graduate Theses and Dissertations

The objective of this thesis is to investigate the feasibility of using a Falling Weight Deflectometer (FWD) as an impact source to rapidly assess the condition of an in service bridge through the evaluation of its modal properties. Tests were conducted on two bridges, a Parker Pony Truss and a modern concrete deck on rolled steel beam bridge. Two full tests were performed on these structures with a hand held impact hammer and a falling weight deflectometer as sources for excitation. The advantage of using a FWD is that many transportation agencies already use these machines for pavement testing and …