Engineering Commons^™

Substrate Concentration Influences Effective Radial Diffusion Coefficient In Canine Cortical Bone, Kurt Farrell, Daniel O’Conor, Mariela Gonzalez, Caroline Androjna, Ronald J. Midura, Surendra N. Tewari, Joanne M. Belovich

Chemical & Biomedical Engineering Faculty Publications

Transport of nutrients and waste across osseous tissue is dependent on the dynamic micro and macrostructure of the tissue; however little quantitative data exists examining how this transport occurs across the entire tissue. Here we investigate in vitro radial diffusion across a section of canine tissue, at dimensions of several hundred microns to millimeters, specifically between several osteons connected through a porous microstructure of Volkmann's canals and canaliculi. The effective diffusion coefficient is measured by a "sample immersion" technique presented here, in which the tissue sample was immersed in solution for 18-30 h, image analysis software was used to quantify …

The Progressive Development Of Turbulence Statistics And Its Impact On Wind Power Predictability, Thomas Woolmington, Keith Sunderland, Jonathan Blackledge, Michael Conlon

Articles

Wind resource assessment is a critical parameter in a diverse range of considerations within the built environment. Engineers and scientists, engaging in building design, energy conservation/application and air-quality/air-pollution control measures, need to be cognisant of how the associated wind resource imposes increased complexities in their design and modelling processes. In this regard, the morphological heterogeneities within these environments, present significant challenges to quantifying the resource and its turbulent characteristics.

This paper presents three aspects of turbulence assessment within the built environment. Firstly, an analysis of how turbulence is currently quantified is considered. The industry standard, Turbulent Intensity (TI) is compared …

Department Of Engineering & Computer Science Awarded Abet Accreditation, Becky St. Clair

Lake Union Herald

No abstract provided.

Recommendations For Kytc’S Railway/Highway At-Grade Crossing Surface Management Practices, Brett R. Malloy, Jerry G. Rose, Macy L. Purcell

Kentucky Transportation Center Research Report

An ideal Railway/Highway At-Grade Crossing Management program involves selecting costeffective practices when designing new crossings and rehabilitating existing crossings. This report outlines two strategies to enhance KYTC’s existing program. First, it describes a process that uses decision-option diagrams to optimize the assessment and implementation of engineering solutions in order to restore desired smoothness, minimize settlement in the postconstruction phase, and foster acceptable long-term performance of crossings following their rehabilitation. Decision-option diagrams rely on assessments that are site-specific and based on historical performance, the present observed performance and condition, and the measureable parameters specific to particular crossings. To supplement this process, …

Railway/Highway At-Grade Crossing Surface Management: An Overview, Brett R. Malloy, Jerry G. Rose

Kentucky Transportation Center Research Report

This report draws on data from around the United States to describe the features of a successful railway/highway at-grade crossing management program; it emphasizes the highway/trackbed structures and crossing surfaces. Developing a structurally adequate crossing system is imperative, as this will produce a smooth surface and a stable highway/trackbed that prolongs crossings’ lifespans while keeping maintenance costs low and minimizing the number of disruptions encountered by highway and railway traffic. An overview of the guidance issued by several transportation agencies and organizations to facilitate the design and construction of railway/highway at-grade crossings is included here. Equally important to developing a …

A Comparative Study Of Generalized Arc-Consistency Algorithms, Olufikayo S. Adetunji

School of Computing: Dissertations, Theses, and Student Research

In this thesis, we study several algorithms for enforcing Generalized Arc­-Consistency (GAC), which is the most popular consistency property for solving Constraint Satisfaction Problems (CSPs) with backtrack search. The popularity of such algorithms stems from their relative low cost and effectiveness in improving the performance of search. Virtually all commercial and public- domain constraint solvers include some implementation of a generic GAC algorithm. In recent years, several algorithms for enforcing GAC have been proposed in the literature that relies on increasingly complex data structures and mechanisms to improve performance. In this thesis, we study, assess, and compare a basic algorithm …

Carbon Black Mediated Conductive Polymer Composite, Mohamed Hussein Faris Ali

Accounting Dissertations

The central goal of this thesis is to produce electrically conductive nanocomposites made out of carbon black obtained from waste tires as filler into a polymeric matrix. Waste tires are discarded in substantial numbers on a daily basis, posing a significant environmental concern. By weight, about 25-35% of a tire is carbon black. Pyrolysis is a convenient and environmentally friendly process to produce carbon black from tires. Due to carbon black’s low density, high electrical conductivity and economical feasibility, this thesis investigates the electrical conductivity of nanocomposites that utilizes carbon black particles as fillers. As a result of its modified …

Design And Testing Of A Nanosatellite Simulator Reaction Wheel Attitude Control System, Fredric William Long

All Graduate Plan B and other Reports, Spring 1920 to Spring 2023

Attitude control of a satellite is required for the pointing of communications antennas and other instruments. For this reason, a control algorithm capable of precision pointing is important. Because the process of sending a satellite into space is time consuming and costly, ground-based methods of testing are paramount. A simulator is a low-cost, groundbased system made to mimic the conditions of a weightless satellite in space. The simulator used in this project controls attitude through applying torque to reaction wheels. The objective of this project is to derive and test a control algorithm for the attitude control of a satellite …

Strategic Planning Tool Development Using Portfolio Decision Analysis, Luis B. Vargas Rojas

Graduate Theses and Dissertations

A portfolio decision analysis strategic planning tool was developed for the Facilities Management Office at the University of Arkansas. The tool provides information to support budget allocation decisions based on their Strategic Planning Project List, project attributes (e.g, seat utilization, scheduling preferences, and sustainability rank), and budget constraints. The projects are evaluated using multiobjective decision analysis. We introduce dynamic value functions, which vary the range of the value measures based on the planning horizon, to evaluate the projects). We determine facilities portfolios based on the project values and constraints using Linear Programming. In addition, insightful reports are generated, which provide …

Indirect Matrix Converter As Standard Power Electronic Interface, Andrés Escobar-Mejía

Graduate Theses and Dissertations

The increase in the penetration levels of distributed generation in the modern power grid and its importance in future energy systems have accelerated the interest of developing new power electronic interfaces for the energy conversion process. The feasibility of applying the indirect matrix converter as the standard power electronic interface for applications with power ratings from several kW to few MW is addressed in this dissertation. Special attention is given to those applications where space dominates the power electronic requirements. The main motivation for using the indirect matrix converter is that eliminates the energy storage component in the way of …

Development Of Micro-Hall Devices For Current Sensing, Thomas White

Graduate Theses and Dissertations

In this work, micro-Hall devices were developed for the purpose of sensing current within a high temperature and high power environment. GaAs HEMT, InGaAs pHEMT, and GaN HEMT structures were studied. These structures were grown by molecular beam epitaxy. Processing techniques including photolithography, metallization, Si deposition, wet etching, and dry etching were studied. Electrical characterization measurements including low frequency noise, Hall effect, sensitivity, capacitance-voltage, and current-voltage were performed.

Electron mobility and sheet carrier density studies were performed for both the InGaAs pHEMT and GaAs HEMT structures. Results indicated the InGaAs pHEMT was superior and thus fabricated as the micro-Hall device. …

The Role Of Quantum Dot Size On The Performance Of Intermediate Band Solar Cells, Najla Alnami

Graduate Theses and Dissertations

The goal of this thesis is to understand possible mechanisms for the reported decrease of the open circuit voltage and solar cell efficiency in quantum dot (QD) intermediate band solar cells (IBSCs). More specifically, the effect of indium arsenide (InAs) QD height on the open circuit voltage and solar cell efficiency was studied in a systematic way. To explore this effect in QD solar cells, several solar cells (SCs) were grown with varying InAs QD heights. All experimental characteristics of the QD solar cells were compared to a reference structure without QDs. All samples were grown by Molecular Beam Epitaxy …

Economic Analysis Of Michigan Commercial Vehicle Enforcement Strategies, Randy José Jorge Díaz

Masters Theses

Transportation infrastructure is an essential component of a nation’s success as it allows efficient transportation of goods to all economic markets, providing economic stability and ensuring trade competiveness. Nearly 70 percent of all of Michigan’s freight is shipped by truck and Michigan is ranked eighth in the USA in terms of the value of its exports with $50 billion per year. Unfortunately, commercial vehicles also contribute to the deterioration of pavement, reducing air quality and potentially influencing road safety. To enforce commercial vehicle laws and regulations, most states utilize fixed weigh stations supplemented with other enforcement strategies. Although fixed weigh …

Comparative Analysis Of Clavicular Tunnel Confìguration For Coracoclavicular Ligament Reconstruction, Mark Omwansa

Masters Theses

A number of coracoclavicular ligament reconstructions are carried out each year and post surgical fractures of the clavicle have been reported. The primary objective of this research is to develop a comparative metrics that compares clavicular tunnel configurations used in coracoclavicular reconstruction techniques. The goal of this comparison is to reduce post surgical failures due to clavicle fractures. The present analysis compared two techniques { a single 3 mm clavicular tunnel and the other double 6 mm tunnels { experimentally, using Four-point bending testing and Finite Element Analysis (FEA). A unique method, slicing, was used to create an FE clavicle …

Virtual Analysis And Evaluation Of Roundabout Safety And Operational Features, Elisha Jackson Wankogere

Masters Theses

Roundabouts can be a solution to safety concerns present at other types of intersections. Recently in the United States, there has been an increase in conversion of problematic intersections to roundabouts to improve their safety. However, it is difficult to make these roundabouts, especially multi-lane roundabouts, safe to all ranges of users. Roundabout features such as advance warning and signage play an important role in determining driver performance as they navigate the roundabout.

This research is an effort to evaluate new and existing roundabout safety and operational features such as signs and pavement markings and how they influence performance of …

Infiltration Performance Of Engineered Surfaces Commonly Used For Distributed Stormwater Management, Nick Alexander Valinski

Theses - ALL

Engineered porous media are commonly used in low impact development (LID) structures to mitigate excess stormwater in urban environments. Differences in infiltrability of these LID systems arise from the wide variety of materials used to create porous surfaces and subsequent maintenance, debris loading, and physical damage. In this study, infiltration capacity of six common materials was tested by multiple replicate experiments with automated mini-disk infiltrometers. The tested materials included porous asphalt, porous concrete, porous brick pavers, flexible porous pavement, engineered soils, and native soils. Porous asphalt, large porous brick pavers, and curb cutout rain gardens showed the greatest infiltration rates. …

Buck Converter, Bowen Liu

Electrical Engineering

The recent sustainable energy growth triggered a huge power electronics demand, specifically related to power conversion. My senior project is a design of a buck converter which steps down the voltage from photovoltaic cells ranging from 5 to 40V to a rechargeable battery with 5V. This converter has a high enough power efficiency to effectively convert the energy harnessed from PV panels.

Power Chest Strap, Adrianne Thoroddsson, Dennis Lin

Electrical Engineering

The Power Chest Strap is an unobtrusive device, like a heart rate monitor, worn around the chest that harvests energy from the expansion of the chest during breathing. The chest strap stores electrical energy that can charge electronic devices such as cell phones. Since small portable devices grow in number, the power strap allows a convenient way to charge your device without having to find a wall outlet for a charger. Research on systems that scavenge energy from arm or leg movement already exist, but these systems require the ability of the user to move their arms and legs. The …

The Unified-Fft Method For Fast Solution Of Integral Equations As Applied To Shielded-Domain Electromagnetics, Brian J. Rautio

Dissertations - ALL

Electromagnetic (EM) solvers are widely used within computer-aided design (CAD) to improve and ensure success of circuit designs. Unfortunately, due to the complexity of Maxwell's equations, they are often computationally expensive. While considerable progress has been made in the realm of speed-enhanced EM solvers, these fast solvers generally achieve their results through methods that introduce additional error components by way of geometric approximations, sparse-matrix approximations, multilevel decomposition of interactions, and more. This work introduces the new method, Unified-FFT (UFFT). A derivative of method of moments, UFFT scales as O(N log N), and achieves fast analysis by the unique combination of …

Adaptive Power Management For Computers And Mobile Devices, Hao Shen

Dissertations - ALL

Power consumption has become a major concern in the design of computing systems today. High power consumption increases cooling cost, degrades the system reliability and also reduces the battery life in portable devices. Modern computing/communication devices support multiple power modes which enable power and performance tradeoff. Dynamic power management (DPM), dynamic voltage and frequency scaling (DVFS), and dynamic task migration for workload consolidation are system level power reduction techniques widely used during runtime. In the first part of the dissertation, we concentrate on the dynamic power management of the personal computer and server platform where the DPM, DVFS and task …

Discrete Gate Sizing Methodologies For Delay, Area And Power Optimization, Jiani Xie

Dissertations - ALL

The modeling of an individual gate and the optimization of circuit performance has long been a critical issue in the VLSI industry. In this work, we first study of the gate sizing problem for today's industrial designs, and explore the contributions and limitations of all the existing approaches, which mainly suffer from producing only continuous solutions, using outdated timing models or experiencing performance inefficiency.

In this dissertation, we present our new discrete gate sizing technique which optimizes different aspects of circuit performance, including delay, area and power consumption. And our method is fast and efficient as it applies the local …

Research: South Dakota State University, Winter 2014, Christie Delfanian, Eric Landwehr

State of Discovery South Dakota State University's Research Magazine

CONTENTS:

Weeds influence gene expression, growth in corn [Page] 2
Graduate research targets childhood obesity [Page] 3
Transmammary drug delivery system for early-stage breast cancer may reduce side effects [Page] 5
Biochemical pathways may be key to scab resistance [Page] 7
New filtration system saves water, money for City of Sioux Falls [Page] 8
Doulas ease stress, increase satisfaction with the birthing experience [Page] 9
Structure lab evaluates strength, durability of structural components [Page] 10
Device gives sunflower producers reprieve from combine fires [Page] 12
Graduate scholarship winner works on renewable energy storage [Page] 12

Mhttu Implementation Final Project Report, Angelica Ramirez, Julian Samayoa, Matt Keeble

Mechanical Engineering

Lawrence Livermore National Laboratory has invested considerable effort in developing fireproof high-efficiency particulate air (HEPA) filters. Due to the nature of LLNL’s research, the air leaving its lab facilities must be filtered before it is released into the atmosphere; thus, each laboratory is equipped with large banks of HEPA filters through which all internal air is exhausted. Over the years, however, fires have erupted in the labs and entire banks of HEPA filters have been destroyed, resulting in repairs and crucial downtime that prove costly.

Engineers and scientists alike have been seeking a permanent solution to this problem, and one …

Machine Shop Learning Kits, Samantha Kelley, Ellen Chambers

Mechanical Engineering

Currently in the Cal Poly Machine shops, students are struggling to find ways to fulfill the 10 hours of shop experience required to gain their Yellow Tag certification. Red Tag is the first level of certification students generally achieve their freshman year. It allows them to use basic machine tools such as drills, shears, benders, etc. Then after completing 10 hours of shop experience they can take the Yellow Tag test, which gains them access to use a welder, mill, and lathe. The heads of the machine shop, the shop technicians, and the mechanical engineering students will all have different …

Compression Tester Shop Press, Colby Johnson, Brett Russon, Taylor Vandenhoek

Mechanical Engineering

A piece of machinery designed to carry out compression and bending tests on building materials constructed by the Center for Vocational Building Technologies (CVBT) in Isarn, Thailand.

Semi-Automated Glass Mat Splice Operation For Asphalt Shingle Line, Justin Bracci, Harry Zhao, Chad Linafelter

Mechanical Engineering

The following report details the senior project sponsored by GAF Materials Corporation, Shafter, CA in regards to semi-automating a glass-mat splicing table for asphalt roofing shingle production. Herein includes details, research, design, and analysis regarding the semi-automation of the gluing processes for the splicing table. A working prototype was manufactured and tested for the future implementation onto GAF’s production line or further senior project involvement.

Wingtip Dynamics Simulator, Eugene Fox, Nick Rodriguez, Steven Rieber

Mechanical Engineering

Raytheon is a defense contracting company with an electronic warfare division that is developing a radio frequency signal triangulation system. Part of the focus in improving this technology is the need for accurate and real time locational knowledge of the signal receivers, which are located at the tips of aircraft wings. Due to turbulence during flight, the fluttering motion of the wings alter the distance and angle relationships of the two receivers and add noise to the received signal data, which negatively affect the triangulation estimates. To mitigate this error caused by the wing flutter, Raytheon is developing a software …

Wildlife Deterrence Method Test Device, Garrett Tietz, Adam Webb, Dane Knutson

Mechanical Engineering

The objective of the Deer Busters team is to design and build a device or system of devices that will be used to determine which method, or methods, are most effective at deer deterrence. JumpSport suspects that a method which gives the appearance of approach to the deer in an aggressive or startling manner but also changes the way it attacks so that the deer do not get used to the device will be most effective. Deer Busters is committed to the completion of the deer deterrent testing device by the end of the fall quarter of 2014.

Analysis For Updating An Irrigation Pumping Station With Variable Frequency Drives, Kirk Teixeira

BioResource and Agricultural Engineering

No abstract provided.

Analysis Of San Luis Obispo Historic Precipitation Data And Calibration Of The Cal Poly Weather Station, Hilary Olsen

BioResource and Agricultural Engineering

No abstract provided.