Engineering Commons^™

Evaluation System Of The Greenport Degree Based On The Fuzzy Logic Theory, Xingchen Yang

World Maritime University Dissertations

No abstract provided.

Research On Correlation Effects Between Tianjin Port And Its Inland Ports Based On Modified Gravity Model, Yayun Zhao

World Maritime University Dissertations

No abstract provided.

The Trend Analysis And Short-Term Forecasting Of Ccbfi, Lulu Cao

World Maritime University Dissertations

No abstract provided.

Influence Of Crystal Structure On The Electrochemical Performance Of A-Site-Deficient Sr 1-Xnb 0.1 Co 0.9 O 3-Δ Perovskite Cathodes, Yinlong Zhu, Ye Lin, Xuan Shen, Jaka Sunarso, Wei Zhou, Shanshan Jiang, Dong Su, Fanglin Chen, Zongping Shao

Faculty Publications

The creation of A-site cation defects within a perovskite oxide can substantially alter the structure and properties of its stoichiometric analogue. In this work, we demonstrate that by vacating 2 and 5% of A-site cations from SrNb_0.1Co_0.9O_3−δ (SNC1.00) perovskites (Sr_1−sNb_0.1Co_0.9O_3−δ, s = 0.02 and 0.05; denoted as SNC0.98 and SNC0.95, respectively), a Jahn–Teller (JT) distortion with varying extents takes place, leading to the formation of a modified crystal lattice within a the perovskite framework. Electrical conductivity, electrochemical performance, chemical compatibility and microstructure of Sr …

Jet-Impingement Effects Of Alumina-Nanofluid On Aluminum And Copper, Gustavo J. Molina, Fnu Aktaruzzaman, Whitney Stregles, Valentin Soloiu, Mosfequr Rahman

Mechanical Engineering: Faculty Publications

Nanofluids are nanosize-powder suspensions that are of interest for their enhanced thermal transport properties. They are studied as promising alternatives to ordinary cooling fluids, but the tribiological effects of nanofluids on cooling-system materials are largely unknown. The authors have developed methodology that uses jet impingement on typical cooling-system materials to test such effects. The work is presented of the authors’ research on the interactions of a typical nanofluid (2% volume of alumina nanopowders in a solution of ethylene glycol in water) which is impinged on aluminum and copper specimens for tests as long as 112 hours. The surface changes were …

Mechanical Engineering News, Georgia Southern University

Mechanical Engineering: News & Publications (2013-2023)

• Engineering Programs Receive Accreditation

Oxidation-Resistant, Solution-Processed Plasmonic Ni Nanochain-SioX (X < 2) Selective Solar Thermal Absorbers, Xiaobai Yu, Xiaoxin Wang, Qinglin Zhang, Juchuan Li, Jifeng Liu

Chemical and Materials Engineering Faculty Publications

Metal oxidation at high temperatures has long been a challenge in cermet solar thermal absorbers, which impedes the development of atmospherically stable, high-temperature, high-performance concentrated solar power (CSP) systems. In this work, we demonstrate solution-processed Ni nanochain-SiO_x (x < 2) and Ni nanochain-SiO₂ selective solar thermal absorbers that exhibit a strong anti-oxidation behavior up to 600 °C in air. The thermal stability is far superior to previously reported Ni nanoparticle-Al₂O₃ selective solar thermal absorbers, which readily oxidize at 450 °C. The SiO_x (x < 2) and SiO₂ matrices are derived from hydrogen silsesquioxane and tetraethyl orthosilicate precursors, respectively, which comprise Si-O cage-like …

Biochar For Remediating Contaminated Soils: Outdoor Experiments In Wales, Uk, Alayne Street-Perrott, Siôn Brackenbury, Iain Robertson, Aoife Ryan, Robert Davison, Heather De-Quincey

BIO-CHAR: Production, Characterization and Applications

Most soil-related applications of biochar have involved agriculture or horticulture. Our current research focusses on remediation of contaminated soils using biochar or biochar compost. We will present the results of outdoor pot and plot trials on three contrasting site types: 1) colliery waste; 2) cleared invasive rhododendron; and 3) metal-mine tailings. All experiments utilized sustainable, lignocellulosic biochar (EarthChar®; UK Biochar Quality Mandate: High Grade), produced using a modified BigChar-1000 fast-pyrolysis/gasification unit equipped with a thermal oxidiser.

Please click on the file below for full content of the abstract.

Digital Back End Development And Interference Mitigation Methods For Radio Telescopes With Phased-Array Feeds, Richard Allen Black

Theses and Dissertations

The Brigham Young University (BYU) Radio Astronomy group, in collaboration with Cornell University, the University of Massachusetts, and the National Radio Astronomy Observatory (NRAO), have in recent years developed and deployed PAF systems that demonstrated the advantages of PAFs for astronomy. However, these systems lacked the necessary bandwidth and acquisition times to be scientifically viable. This thesis outlines the development of a 20-MHz bandwidth system that can acquire for much longer periods of time and across much larger bandwidths than previous BYU systems. A report of the deployment of this system on the 305-meter reflector at the Arecibo Observatory in …

College Of Engineering News, Georgia Southern University

College of Engineering & Computing: News & Publications (2010-2023)

• Manufacturing Engineering at Georgia Southern

Security Questions Abound As Autonomous Vehicles Emerge, Usu College Of Engineering

College of Engineering News

With the rollout of Google’s self-driving car, computer security experts at Utah State University are posing new questions about the hardware and software features that will drive tomorrow’s fleets of autonomous vehicles.

Natural Convection From Circular Cylinders, Sandra K. S. Boetcher

Publications

Chapter 1

Natural convection heat transfer from circular cylinders in quiescent environments is a subject which has been studied extensively. Although a well-established topic, to the best knowledge of the author no single source of reference is found for natural convection from circular cylinders for varying orientations (horizontal, vertical, and inclined). This book attempts to be a reference for Nusselt number correlations for circular cylinders of all inclinations including horizontal and vertical.

Synthesis And Characterization Of Nanostructured Nickel Diselenide Nise2 From The Decomposition Of Nickel Acetate, (Ch3co2)2ni, Ming Yin, Stephen O'Brien

Publications and Research

Solution processed NiSe2 nanorods were synthesized by a modified colloidal synthesis technique, by chemical reaction of TOPSe and nickel acetate at 150 ∘C. The rods exist as an oleic acid ligand stabilized solution, with oleic acid acting as a capping group. Structural characterization by X-ray diffraction and transmission electron microscopy indicates that the particles are rod-like shaped crystals with a high and relatively constant aspect ratio (30 : 1). TEM shows that the width and the length of the nanorods are in the range 10–20nm and 300–350 nm, respectively. XRD indicates that the nanorods are pure and well crystallized. The …

Fluid Properties In The Formation Of High-Grade Iron Ore In Northern Minnesota, Elizabeth Drommerhausen

Journal of Undergraduate Research at Minnesota State University, Mankato

The Mesabi Iron Range in Northern Minnesota has been a major producer of iron ore for over 100 years. Production has been from the 1.85 – billion-year –old Biwabik Iron Formation, an iron-rich sedimentary rock that is tilted gently to the south. Most of the known high-grade ore lies near the surface and has been already mined. Determining whether more high-grade ore may lie at depth could have significant economic impact on the mining industry in northern Minnesota. To evaluate the likelihood of finding more high-grade iron ore deeper underground, it is important to determine the source of the fluids …

Analysis Of An All Optical De-Multiplexer Architecture Utilizing Bevel Design For Spatially Multiplexed Optical Fiber Communication Systems, Syed H. Murshid, Michael F. Finch, Gregory L. Lovell

Electrical Engineering and Computer Science Faculty Publications

Spatial domain multiplexing (SDM) is a system that allows multiple channels of light to traverse a single fiber, utilizing separate spatial regions inside the carrier fiber, thereby applying a new degree of photon freedom for optical fiber communications. These channels follow a helical pattern, the screen projection of which is viewable as concentric rings at the output end of the system. The MIMO nature of the SDM system implies that a typical pin-diode or APD will be unable to distinguish between these channels, as the diode will interpret the combination of the SDM signals from all channels as a single …

College Of Engineering News, Georgia Southern University

College of Engineering & Computing: News & Publications (2010-2023)

• Engineering Programs Receive Accreditation

Circular Polarized Leaky Wave Surface, Franklin Muriuki Manene, Brian A. Lail, Edward C. Kinzel

Electrical Engineering and Computer Science Faculty Publications

A circular polarized (CP) infrared (IR) leaky wave surface design is presented. The metasurface consists of an array of rectangular patches connected by microstrip and operating over the long-wave infrared (LWIR) spectrum with directional wave emission and absorption. The surface is composed of periodically aligned arrays of sub-wavelength metal patches separated from a ground plane by a dielectric slab. The design combines the features of the conventional patch and leaky wave antenna leading to a metasurface that preferentially emits CP IR radiation by use of axial asymmetrical unit cells. This is a deviation from reported structures that mainly employ a …

Mode Splitting And Resonant Coupling Between A Slot Metasurface And Pmma, Michael F. Finch, Brian A. Lail

Electrical Engineering and Computer Science Faculty Publications

A slot metasurface (metascreen) designed to have resonance that couples with the 1733 cmˉ¹ absorption peak of the C=O molecular bond of PMMA (polymethyl methacrylate) is presented. The metasurface is made of a gold layer perforated with periodically-placed slots and stood off above a reflective ground plane with silicon substrate. The metasurface is modeled using ANSYS HFSS and including measured optical properties for gold, silicon and PMMA in the infrared spectrum. PMMA forms a thin overcoat and exhibits a strong absorption resonance at wavenumber 1733 cmˉ¹. Coupling between the metasurface and PMMA is observed via normal mode splitting. Mode splitting …

Concentric Circles Based Simple Optical Landing Aid For Vertical Takeoff And Landing Aircrafts, Syed H. Murshid, Rayan Enaya

Electrical Engineering and Computer Science Faculty Publications

Vertical takeoff and landing (VTOL) aircrafts such as helicopters and drones, add a flexible degree of operation to airborne vehicles. In order to operate these devices in low light situations, where it is difficult to determine slope of the landing surface, a lightweight and standalone device is proposed here. This small optical device can be easily integrated into current VTOL systems. An optical projector consisting of low power, light weight, solid state laser along with minimal optics is utilized to illuminate the landing surface with donut shaped circles and coaxial centralized dot. This device can placed anywhere on the aircraft …

Analysis Of Spatial Domain Multiplexing/Space Division Multiplexing (Sdm) Based Hybrid Architectures Operating In Tandem With Wavelength Division Multiplexing, Syed H. Murshid, Gregory L. Lovell, Bilas Chowdhury, Arnob Hridoy, Gurinder Parhar, Abhijit Chakravarty, Saud F. Alanzi

Electrical Engineering and Computer Science Faculty Publications

Spatial domain multiplexing (SDM) also known as space division multiplexing adds a new degree of photon freedom to existing optical fiber multiplexing techniques by allocating separate radial locations to different MIMO channels as a function of the input launch angle. These independent MIMO channels remain confined to the designated location while traversing the length of the carrier fiber, due to helical propagation of light inside the fiber core. The SDM technique can be used in tandem with other multiplexing techniques, such as time division multiplexing (TDM), and wavelength division multiplexing in hybrid optical communication schemes, to achieve higher optical fiber …

Universal Liquid Level Sensor Employing Fresnel Coefficient Based Discrete Fiber Optic Measurement Technique, Syed H. Murshid

Electrical Engineering and Computer Science Faculty Publications

A compact and light weight liquid-level-measuring system based on fiber-optics sensor technology is presented as alternative to systems based on float gauges and other conventional level sensors for liquids that pose fire, corrosion and explosion hazards. These Fresnel reflection based fiber-optic sensors are inherently safer because they do not include electrical connections inside fuel/chemical tanks, and they exploit changes in internal reflection of guided electromagnetic modes as a result of contact between the outer surface of optical fiber and a liquid. Discrete changes in light transmission/reflection are used to indicate that liquid has come into contact with a suitably designed …

An Order Of Magnitude Improvement In Optical Fiber Bandwidth Using Spatial Domain Multiplexing/Space Division Multiplexing (Sdm) In Conjunction With Orbital Angular Momentum (Oam), Syed H. Murshid, Saud F. Alanzi, Arnob Hridoy, Gregory L. Lovell, Gurinder Parhar, Abhijit Chakravarty, Bilas Chowdhury

Electrical Engineering and Computer Science Faculty Publications

Spatial Domain Multiplexing/Space Division Multiplexing (SDM) can increase the bandwidth of existing and futuristic optical fibers by an order of magnitude or more. In the SDM technique, we launch multiple single mode pigtail laser sources of same wavelength into a carrier fiber at different angles. The launching angles decide the output of the carrier fiber by allocating separate spatial locations for each channel. Each channel follows a helical trajectory while traversing the length of the carrier fiber, thereby allowing spatial reuse of optical frequencies. In this endeavor we launch light from five different single mode pigtail laser sources at different …

Analysis And Comparison Of Experimental And Simulated Results For An Omnidirectional Free Space Optical Receiver Architecture, Syed H. Murshid, Gregory L. Lovell, Michael F. Finch

Electrical Engineering and Computer Science Faculty Publications

Lasercomm or Free Space Optical (FSO) communication has the potential to provide fiber optic data rates without the need for wired physical connectivity. This paper investigates the feasibility of an Omnidirectional FSO (O-FSO) communications link that utilizes fiber bundles for improved omni-directionality and compares experimental data with modeled results. Current state of the art O-FSO link ranges are limited to 100 meters or so, with data rates of only a few 100 kbits/sec. The proposed architecture is formed from commercially available fiber bundle that collects omnidirectional light due to the hemispheric nature of the fiber bundle by exploiting the acceptance …

Design And Development Of A Miniature In Vivo Surgical Robot With Distributed Motor Control For Laparoendoscopic Single-Site Surgery, Eric J. Markvicka

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

Paradigm shifts in invasiveness, recovery time, cosmesis, and cost have been seen within the field of general surgery through major advances in surgical technology. Some of the most advanced types of general surgery now include Minimally Invasive Surgery (MIS), LaparoEndoscopic Single-Site (LESS) surgery, and Natural Orifice Translumenal Endoscopic Surgery (NOTES). One of the newest and rapidly developing catalysts is robotic platforms. Such platforms have improved ergonomics and control, increased workspace and dexterity, and have surpassed the efficacy of many non-robotic platforms such as traditional laparoscopic surgical tools. This thesis presents the design and development of a four-degree-of-freedom (4- DOF) miniature …

Instrumentation To Monitor Bridge Foundation On The Crosstown Project, Brian Welch

Journal of Undergraduate Research at Minnesota State University, Mankato

The Crosstown Bridge Monitoring Project is located at the intersection of Highway 62 and Interstate I35W a few miles south and west of downtown Minneapolis. The bridge being evaluated is at a railroad overpass located midway along the Crosstown expansion. This research project involved placing instrumentation on the bridge foundation in order to measure the change in the foundation loading during the course of the construction project. For several years there have been questions pertaining to the forces in the pile foundations that support highway embankments. This project placed strain gages on the pile foundations in order to monitor these …

Ceas E-News 08.15.2014, College Of Engineering And Applied Sciences

College of Engineering and Applied Sciences News

• Sunseeker Places 3rd at Formula Sun Grand Prix
• New WMU Aerospace Engineering Master’s Degree Program Takes Off This Fall
• Paper Technology Foundation Annual Meeting to Highlight 100% Job Placement and Record Starting Salaries for WMU Paper Engineering Graduates
• Homecoming, Job Fair and Engineering Expo

Shape Optimization Of Airfoils Without And With Ground Effect Using A Multi-Objective Genetic Algorithm, Yilei He

McKelvey School of Engineering Graduate Student Theses & Dissertations

The focus of this thesis is on shape optimization using a genetic algorithm. A multi-objective genetic algorithm (MOGA) is employed to optimize the shape of an airfoil to improve its lift and drag characteristics, in particular to achieve two objectives simultaneously that is to increase its lift as well as its lift to drag ratio. The commercially available software FLUENT is employed to calculate the flow field on an adaptive structured mesh, which is generated by the commercial mesh generating software ICEM. The flow field is calculated using the Reynolds-Averaged Navier-Stokes (RANS) equations in conjunction with a two equation k-ω …

Engineering Biosensors For Short-Chain Alcohols, Yu Xia

McKelvey School of Engineering Graduate Student Theses & Dissertations

Biofuel is a promising substitute for fossil fuel and the research of biofuel production has been extensively conducted during the recent years. Great efforts have been made to create many types of the fuel production hosts. However, effective approaches for high specificity and high throughput screening of the fuel production strains are still lacking. The cellular stress response is one universal defense mechanism when a microbial cell is exposed to an unfavorable substance or environment. It triggers a series of downstream responses when a cell senses certain chemicals. Transcriptional factors are widely used in living organisms to regulate gene expression. …

Evaluation Of The Performance Of Various Turbulence Models For Accurate Numerical Simulation Of A 2d Slot Nozzle Ejector, Colin Graham

McKelvey School of Engineering Graduate Student Theses & Dissertations

With the development over the last several decades, accurate Computational Fluid Dynamics (CFD) modeling has now become an essential part in the analysis and design of various industrial products where the fluid flow plays an important role. The goal of this thesis is to apply the CFD technology to the analysis of a 2D slot nozzle ejector which has application in Short Take-off and Landing (STOL) aircraft and other future aerospace vehicles. In the nozzle-ejector configuration, the high speed air flow from the nozzle entrains the ambient air into a mixing chamber (ejector) as a means to create additional thrust …

Lipid Extraction From Scenedesmus Sp. Microalgae For Biodiesel Production Using Hot Compressed Hexane, Hee-Yong Shin, Jae-Hun Ryu, Seong-Youl Bae, Czarena L. Crofcheck, Mark Crocker

Center for Applied Energy Research Faculty and Staff Publications

Lipid extraction from Scenedesmus sp. microalgae using hot compressed hexane (HCH) was investigated. Extraction performance was evaluated near the critical point of hexane and was compared with that of hexane extraction performed at room temperature and pressure, and the Bligh and Dyer extraction method. Experimental data showed that HCH significantly improves the lipid yield and rate of lipid extraction compared to the use of hexane at ambient conditions. High yields of biodiesel-convertible lipid fractions were rapidly achieved at the critical point of hexane, at a level comparable to that of the Bligh and Dyer method.