Engineering Commons^™

Microbubble Cavitation Imaging, F. Vignon, W. T. Shi, J. E. Powers, E. Carr Everbach, J. J. Liu, S. J. Gao, F. Xie, T. R. Porter

Engineering Faculty Works

Ultrasound cavitation of microbubble contrast agents has a potential for therapeutic applications such as sonothrombolysis (STL) in acute ischemic stroke. For safety, efficacy, and reproducibility of treatment, it is critical to evaluate the cavitation state (moderate oscillations, stable cavitation, and inertial cavitation) and activity level in and around a treatment area. Acoustic passive cavitation detectors (PCDs) have been used to this end but do not provide spatial information. This paper presents a prototype of a 2-D cavitation imager capable of producing images of the dominant cavitation state and activity level in a region of interest. Similar to PCDs, the cavitation …

Syllabus For Space Systems Engineering 120: Satellites And Space Systems I (Spring 2013), Robert J. Twiggs

Robert "Bob" Twiggs STEM Education Collection

Professor Bob Twiggs' 2013 spring syllabus for Space Systems Engineering 120: Satellites and Space Systems I.

.

Extended Color Gamut For Flexographic Printing, Gaurav Dinesh Sheth

Masters Theses

The advancement in technology and the necessity to satisfy the increasing quality requirements has aroused the need for use of extended color gamut in flexographic printing. The information about extended gamut inks and ink systems is not easily available therefore, it is essential to define ink sets and color sequences that will produce optimal results in the flexographic printing process. The results were produced by evaluating color gamut volumes obtained by printing with four color process inks, and additional ink sequences, as well as by evaluating other print parameters that provide evidence in support of the research work. Special focus …

The Impact Of Various Steel Stud Wall Frame Components On Energy Efficiency Analysis – Case Study, Aiyin Jiang, John Dryden

Construction Management Faculty Research and Scholarship

Steel stud framing is an excellent alternative to wood stud framing in residential construction. Steel framing is structurally sound, sustainable, and resistant to mold and insect infestation. However, the use of steel framing in the residential market remains low, due in large part to concerns on the thermal performance of steel. Over the past several years, engineers and constructors have increased the thermal resistance of steel stud walls through various wall assembly improvements, the impact of these components on energy efficiency is unclear. This study applies computer software to simulate the performance of various steel stud wall system assemblies. This …

Biodiesel Reactor Design With Glycerol Separation To Increase Biodiesel Production Yield, Budy Rahmat, Imas Siti Setiasih, Roni Kastaman

Makara Journal of Technology

The study consisted of reactor design used for transesterification process, effect of glycerol separation on transesterification reaction, determination of biodiesel quality, and mass balance analysis. The reactor was designed by integrating circulated pump/stirrer, static mixer, and sprayer that intensify the reaction in the outer tank reactor. The objective was to reduce the use of methanol in excess and to shorten the processing time. The results showed that the reactor that applied the glycerol separation was able to compensate for the decreased use of the reactant methanol from 6:1 to 5:1 molar ratio, and changed the mass balance in the product, …

Development Of Seebeck-Coefficient Measurement Systems Using Kelvin-Probe Force Microscopy, Kazutoshi Miwa, Faiz Salleh, Hiroya Ikeda

Makara Journal of Technology

Thermoelectric device is investigated by a number of researchers in order to enhance the thermoelectric efficiency. It is known that the efficiency can be improved by quantum effect. However, it is difficult to measure the thermoelectric characteristics of nanometer-scale structures. Thus a new measurement method is expected to be developed. We propose to apply Kelvin-probe force microscopy (KFM) to characterization of thermoelectric materials. KFM can locally observe surface potential of Fermi energy of a sample without touching the sample surface. In the present paper, we estimate the Seebeck coefficient of thin Si-on-insulator layers using KFM.

Detecting Point-Like Sources Of Unknown Frequency Spectra, Raffaele Solimene, Giuseppe Ruvio, Angela Dell’Aversano, Antonio Cuccaro, Max Ammann, Rocco Pierri

Articles

The problem of detecting point-like sources whose frequency spectrum is unknown is addressed. Limitations of single-frequency approaches are identified by analytical as well as numerical arguments. To overcome these limits, different multifrequency approaches which combine frequency data incoherently are compared. In particular, a novel multifrequency MUSIC-like algorithm based on interferometric concepts is proposed. Results show that the algorithm outperforms other methods under comparison.

Conditional Spectrum Computation Incorporating Multiple Causal Earthquakes And Ground‐Motion Prediction Models, Ting Lin, Stephen C. Harmsen, Jack W. Baker, Nicolas Luco

Civil and Environmental Engineering Faculty Research and Publications

The Conditional Spectrum (CS) is a target spectrum (with conditional mean and conditional standard deviation) that links seismic hazard information with ground motion selection for nonlinear dynamic analysis. Probabilistic seismic hazard analysis (PSHA) estimates the ground motion hazard by incorporating the aleatory uncertainties in all earthquake scenarios and resulting ground motions as well as the epistemic uncertainties in ground motion prediction models (GMPMs) and seismic source models. Typical CS calculations to date are produced for a single earthquake scenario using a single GMPM, but more precise use requires consideration of at least multiple causal earthquakes and multiple GMPMs that are …

Analyzing The Function Of Cartilage Replacements: A Laboratory Activity To Teach High School Students Chemical And Tissue Engineering Concepts, Julie N. Renner

Faculty Scholarship

A cartilage tissue engineering laboratory activity was developed as part of the Exciting Discoveries for Girls in Engineering (EDGE) Summer Camp sponsored by the Women In Engineering Program (WIEP) at Purdue University. Our goal was to increase awareness of chemical engineering and tissue engineering in female high school students through a laboratory activity that incorporated a number of National Research Council learning objectives for science and engineering. This manuscript describes the context of the activity, detailed instructions to perform the activity, and a summary of the feedback. As a result of the activity, participants knew more about the chemical engineering …

Low-Symmetry Monoclinic Ferroelectric Phase Stabilized By Oxygen Octahedra Rotations In Strained Euₓsr₁₋ₓtio₃ Thin Films, Anna N. Morozovska, Yijia Gu, Victoria V. Khist, Maya D. Glinchuk, Long-Qing Chen, For Full List Of Authors, See Publisher's Website.

Materials Science and Engineering Faculty Research & Creative Works

Using Landau-Ginzburg-Devonshire theory and phase-field modeling, we explore the complex interplay between a structural order parameter (oxygen octahedron rotation) and polarization in Eu_xSr_1-xTiO₃ thin films. Under a biaxially tensile strain, a low-symmetry monoclinic phase with in-plane ferroelectric polarization is found to be stabilized by antiferrodistortive oxygen octahedra tilts. The monoclinic phase is stable over a wide temperature range. It is characterized by a large number of energetically equivalent polar and structural twin domains. This work demonstrates the development of a spontaneous polarization and piezo- and pyroelectricity in a ferroelastic twin boundary arising from flexoelectric coupling …

Assessment Procedures For Paved And Gravel Roads, Claudio Figueroa, Bradley Fotsch, Sarah M. Hubbard, John Haddock

Indiana Local Technical Assistance Program (LTAP) Publications

The funding available to local agencies in Indiana to manage roadways has decreased in recent years, and many agencies cannot provide adequate maintenance with the available resources. Consequently, agencies are doing everything they can to evaluate the least expensive method to maintain their roads that will meet their objectives and needs. In some cases, the most appropriate surface type is a paved road, and in some cases, it is a gravel road. The decision as to the most appropriate surface type depends on a variety of factors, such as cost, traffic volume, development and public input. The purpose of this …

Investigation Of Pulse Detonation Engines; Theory, Design And Analysis, Jeff Vizcaino

Doctoral Dissertations and Master's Theses

Detonation and constant volume combustion has been known to the scientific community for some time but only recently has active research been done into its applications. Detonation based engines have received much attention in the last two decades because of its simple design and potential benefits to the aerospace industry. It is then the goal of this study to provide a background into detonation theory and application and establish the basis for future detonation based research at Embry-Riddle Aeronautical University. In this paper we will discuss the experimental aspects of building, testing, and analysis of a pulsed detonation tube …

Agricultural Drought Pattern In West Java Using Thermal Vegetation Index From Modis-Terra Satellite, Dini Daruati, Rahmatulloh Rahmatulloh, Sri Hardiyanti Purwadhi

Makara Journal of Technology

This study examines agricultural drought paddy fields in West Java. The aims of this research are to know the pattern and distribution of paddy field drought in West Java and the correlation between drought and the physical characteristics. The agricultural drought is obtained from TVI (Thermal Vegetation Index) model. TVI is derived from MODIS Terra satellite image, which is the ratio between the LST (Land Surface Temperature) and EVI (Enhanced Vegetation Index). Physical factors studied are rainfall, l slope, geomorphology, soil drainage, and irrigation areas. The most severe drought occurred in September 2006 because of El Nino, covering 806,564 ha, …

Thickness-Shear Vibration Of A Rectangular Quartz Plate With Partial Electrodes, Huijing He, Jiashi Yang, John A. Kosinski, Ji Wang

Department of Mechanical and Materials Engineering: Faculty Publications

We study free vibration of a thickness-shear mode crystal resonator of AT-cut quartz. The resonator is a rectangular plate partially and symmetrically electroded at the center with rectangular electrodes. A single-mode, three-dimensional equation governing the thickness-shear displacement is used. A Fourier series solution is obtained. Numerical results calculated from the series show that there exist trapped thickness-shear modes whose vibration is mainly under the electrodes and decays rapidly outside the electrodes. The effects of the electrode size and thickness on the trapped modes are examined.

Estimating Cell Capacity For Multi-Cell Electrical Energy System, Iman Ahari Hashemi

Doctoral Dissertations and Master's Theses

A Multi-Cell Electrical Energy System is a set of batteries that are connected in series. The series batteries provide the required voltage necessary for the contraption. After using the energy that is provided by the batteries, some cells within the system tend to have a lower voltage than the other cells. Also, other factors, such as the number of times a battery has been charged or discharged, how long it has been within the system and many other factors, result in some cells having a lesser capacity compared to the other cells within the system. The outcome is that it …

Investigation Of The Closing Forces Involved In Re-Approximation Of The Renal Remnant Following Partial Nephrectomy, Donald M. Endres Ii

Masters Theses

Partial nephrectomy has become the preferred method of treatment in certain renal diseases, including small, peripheral tumors. However, re-establishment of hemostasis in the remaining tissue remains a challenging procedure. To better understand the forces involved in re-approximation of the renal remnant, this study measures the suture tensions reached in sliding clip renorrhaphy, as well as the ability of the tissue to support those tensions, and reviews how long suture material might be expected to survive those forces.

Three separate groups of experiments were conducted on fresh, porcine kidney tissue. Treatment groups were compared using commercially available software to compute appropriate …

Growth Of Crsi2 Nanostructures Using Crcl2 Powder On Si Substrates, Wen Li, Meng Erchao, Tomoji Matsushita, Shingo Oda, Daisuke Ishikawa, Kaito Nakane, Hirokazu Tatsuoka

Makara Journal of Technology

Chromium disilicide (CrSi2) nanostructures were grown by the exposure of Si (111) substrates to CrCl2 vapor in an argon gas flow at atmospheric pressure without using any metal catalyst. Dependence of the growth condition on the structural property was investigated. Hexagonal-shaped CrSi2 microrods were grown at 750 °C with 0.05 g of CrCl2. As the quantity of CrCl2 increased to 0.1 g, the bundle of CrSi2 nanowires with microrods and web-liked CrSi2 nanostructure with turning angles were grown at 750 °C and 700 °C, respectively. The preliminary discussion on the growth mechanism of CrSi2 micro- and nanostructures was carried out.

Biological Pretreatment Of Oil Palm Frond Fiber Using White-Rot Fungi For Enzymatic Saccharification, Euis Hermiati, Sita Heris Anita, Lucky Risanto, Dyah Styarini, Yanni Sudiyani, Achmad Hanafi, Haznan Abimanyu

Makara Journal of Technology

Oil palm frond is one type of lignocellulosic biomass abundantly and daily available in Indonesia. It contains cellulose which can be converted to glucose, and further processed to produce different kinds of value –added products. The aim of this research is to study the effects of biological pretreatment of oil palm frond (OPF) fiber using Phanerochaete chrysosporium and Trametes versicolor on the enzymatic saccharification of the biomass. The OPF fiber (40-60 mesh sizes) was inoculated with cultures of the two fungi and incubated at 27 °C for 4 weeks. The samples were taken after 1, 2, 3, and 4 weeks …

Electromagnetic Simulation For Thz Antenna-Coupled Microbolometers Operated At Room Temperature, Makoto Aoki, Masanori Takeda, Norihisa Hiromoto

Makara Journal of Technology

Room-temperature terahertz (THz) detectors with higher performance are necessary for utilizing the THz wave in various sensing, spectroscopy and imaging, but even the best ones in the present are still insufficient for the practical applications. This issue is essential especially in the region around 1 THz at which there exists a large technology gap between microwave and middle-infrared. Therefore, we study to develop an antenna-coupled microbolometer to achieve a high-performance THz detector operated at a room-temperature for sensing at around 1 THz frequency wave. In this paper, we present several important features and results obtained from electromagnetic simulations, which help …

Analysis Of Hole Lifetime In Soi Mosfet Single-Photon Detector, Dedy Septono Catur Putranto, Wei Du, Hiroaki Satoh, Atsushi Ono, Purnomo Sidi Priambodo, Djoko Hartanto, Hiroshi Inokawa

Makara Journal of Technology

Hole lifetime in the silicon-on-insulator (SOI) metal-oxide-semiconductor field-effect transistor (MOSFET) singlephoton detector was evaluated by the analysis of drain current histograms for different light intensities and substrate voltages. It was found that the peaks in the histogram corresponding to the larger number of stored holes grew as the gate bias decreased. This was attributed not to the increased light absorption efficiency or collection efficiency of the photo-generated holes, but to the prolonged hole lifetime presumably caused by the higher transverse electric field inside the body of SOI MOSFET.

Recognition System Of Indonesia Sign Language Based On Sensor And Artificial Neural Network, Endang Supriyati, Mohammad Iqbal

Makara Journal of Technology

Sign language as a kind of gestures is one of the most natural ways of communication for most people in deaf community. The aim of the sign language recognition is to provide a translation for sign gestures into meaningful text or speech so that communication between deaf and hearing society can easily be made. In this research, the Indonesian sign language recognition system based on flex sensors and an accelerometer is developed. This recognition system uses a sensory glove to capture data. The sensor data that are processed into feature vector are the 5-fingers bending and the palm acceleration when …

Performance Optimization Of Microbial Fuel Cell (Mfc) Using Lactobacillus Bulgaricus, Rita Arbianti, Tania Surya Utami, Heri Hermansyah, Deni Novitasari, Ester Kristin, Ira Trisnawati

Makara Journal of Technology

Electrical energy needs in Indonesia are expected to continue to rise. The use of petroleum as a source of energy still dominates, although oil reserves in Indonesia are increasingly being depleted. Therefore, there is a need to develop alternative sources of sustainable energy, such as microbial fuel cell (MFC). In this study, Lactobacillus bulgaricus was used as an electricity producer in a dual-chamber MFC reactor. We investigated the maximum electrical energy by varying the bacterial optical density (OD), the operational time of MFC, the reactor volume, the electrolyte solution, and the configuration of MFC reactor. In this study, the maximum …

Design And Implementation Of A Primitive Neural Stimulator With Simulated Excitatory Post-Synaptic Potentials, José Aquiles Parodi Amaya

Honors Capstones

No abstract provided.

Engineered Production Of Fungal Anticancer Cyclooligomer Depsipeptides In Saccharo-Myces Cerevisiae, Dayu Yu, Fuchao Xu, Jiachen Zi, Siyuan Wang, David Gage, Jia Zeng, Jixun Zhan

Biological Engineering Faculty Publications

Two fungal cyclooligomer depsipeptide synthetases (CODSs), BbBEAS (352 kDa) and BbBSLS (348 kDa) from Beauveria bassiana ATCC 7159, were reconstituted in Saccharomyces cerevisiae BJ5464-NpgA, leading to the production of the corresponding anticancer natural products, beauvericins and bassianolide, respectively. The titers of beauvericins (33.82±1.41 mg/l) and bassianolide (21.74±0.08 mg/l) in the engineered S. cerevisiae BJ5464-NpgA strains were comparable to those in the native producer B. bassiana. Feeding D-hydroxyisovaleric acid (D-Hiv) and the corresponding L-amino acid precursors improved the production of beauvericins and bassianolide. However, the high price of D-Hiv limits its application in large-scale production of these cyclooligomer depsipeptides. Alternatively, we …

Comparison Of Voice And Text Atc Communications In The Cockpit For Esl Pilots, Shannon Marie Cummings

Doctoral Dissertations and Master's Theses

Throughout the course of any flight, pilots and air traffic control (ATC) are in constant radio communication regarding the position and route of the aircraft. Effective pilot-ATC communication helps to increase safety by increasing the situation awareness of both the pilot and controller. In the current pilot-ATC communication system, auditory messages are sent back and forth between the pilot and controller. The nature of these auditory messages makes them highly susceptible to memory and information processing limitations. This effect is magnified when dealing with pilots who have learned English as a second language (ESL) as people have more difficulty processing …

A Preliminary Study Of Acoustic Prediction Technology Based On Detached Eddy Simulations For Supersonic Jets Impinging On Flat Plates, Yuvraj Dewan

Doctoral Dissertations and Master's Theses

An application of an existing industry tool to study supersonic jets impinging on at plates is shown. This industry tool is the commercially available CFD package ANSYS FLUENT. The supersonic jet studied is perfectly expanded with a Mach number of 1.5, and it impinges on a flat surface 4 nozzle throat diameters from the jet exit. All turbulence modeling is done using a hybrid RANS/LES technique known as Delayed Detached Eddy Simulation (DDES). A transient solution is calculated using the pressure-based coupled solver formulation with the second-order bounded central-upwind spatial discretization and second-order implicit time marching scheme. Flow features like …

Estimation Of Real-Time Runway Surface Contamination Using Flight Data Recorder Parameters, Donovan C. Curry

Doctoral Dissertations and Master's Theses

Within this research effort, the development of an analytic process for friction coefficient estimation is presented. Under static equilibrium, the sum of forces and moments acting on the aircraft, in the aircraft body coordinate system, while on the ground at any instant is equal to zero. Under this premise the longitudinal, lateral and normal forces due to landing are calculated along with the individual deceleration components existent when an aircraft comes to a rest during ground roll. In order to validate this hypothesis a six degree of freedom aircraft model had to be created and landing tests had to be …

A Naturalistic Study Of Long-Term Working Memory Capacity For Meaningful Visual And Auditory Stimuli, Joseph M. Jaworski

Doctoral Dissertations and Master's Theses

The purpose of this study was to explore long-term working memory in experts in an information-rich, dynamic domain. Of particular interest were strategies experts use to enhance long-term working memory capacity when working with verbal versus aural information. Three air traffic control instructors participated in four complex air traffic control scenarios, two radar scenarios in which information was presented visually and two non-radar scenarios in which information presentation was purely aural. Participants recalled traffic situation information at two points during and at the end of each scenario. Recall data for each scenario type were assessed in terms of evidence about …

Spatial Cognition Differences Between Men And Women In Spatial Cue Environments During Flight Simulation, Heidi Crystal Kim

Doctoral Dissertations and Master's Theses

Ground reference maneuvers are an important component of pilot training. In order to perform these maneuvers, pilots rely on cues from the environment to determine where their aircraft is in relation to objects on the ground. This process requires a high degree of spatial cognition, which refers to the cognitive processes used to orient oneself in space. Two factors that can influence spatial cognition in the context of aviation ground reference maneuvers are the availability of spatial cues and the biological sex of the pilot. Research suggests spatial cues aid in the identification of potentially dangerous objects. In the context …

Incorporating Industry Needs Into The Development Of An Undergraduate Degree In Commercial Space Operations, Yash Bipinchandra Mehta

Doctoral Dissertations and Master's Theses

The rapid expansion of the commercial space industry, not unlike the aviation industry in the early 20^th century, has left the industry facing unique challenges. As companies continue to expand, the need for a well-trained workforce becomes critical. The needed workforce must be specifically educated to enter the commercial space industry at graduation. To have a successful industry, a workforce must be trained in skills that meet the industry's needs. In that regard, this study consisted of a survey of leaders in the commercial space industry to identify the different skill-sets sought by the industry. The results of the …