Engineering Commons^™

Analysis Of The Feasibility Of Utilizing Wakeup Radios To Optimize Energy And Latency Performance Of Wireless Sensor Networks, Benjamin D. Parks

Department of Computer Electronics and Engineering: Dissertations, Theses, and Student Research

Wireless sensor networks (WSNs) have the potential to radically improve our lives by pervasive environmental monitoring in many applications. However, there are many applications that would be ideal for WSNs, but where reportable events occur with long (days, weeks) or unpredictable durations between occurrences. These uses are hampered by the high energy and latency costs of always-on and periodic wakeup networks, which waste energy on node synchronization and idle monitoring of the RF channel, and exhibit unacceptably high latency for urgent events, e.g., alarms. This thesis proposes, designs, assembles and tests, in a multi-hop WSN test bed, a wakeup receiver …

The Effect Of Network Transitions On Spontaneous Activity And Sycnhrony In Devloping Neural Networks, Jude P. J. Savarraj

Doctoral Dissertations

Connectivity patterns of developing neural circuits and the effects of its dynamics on network behavior, particularly the emergence of spontaneous activity and synchrony, are not clear. We attempt to quantify anatomical connectivity patterns of rat cortical cultures during different stages of development. By culturing the networks on dishes embedded with micro electrode arrays, we simultaneously record electrical activity from multiple regions of the developing network and monitor its electrical behavior, particularly its tendency to fire spontaneously and to synchronize under certain conditions. We investigate possible correlations between changes in the network connectivity patterns and spontaneous electrical activity and synchrony. Cocultures …

Intrinsic Mode Function Synchronization Measures For The Anticipation Of Seizures In Epilpsy, Daniel William Moller

Doctoral Dissertations

Epileptic seizures affect as many as 50 million people and often occur without warning or apparent provocation. We explore the applicability of noise-assisted Ensemble Empirical Mode Decomposition (EEMD) for patient-specific seizure anticipation synchronization measures as applied to the EEMD intrinsic mode function (IMF) output. Intracranial EEG data were obtained from pre-surgical monitoring at the Epilepsy Center of the University Hospital of Freiburg. Data from twenty patients were analyzed. For each recorded channel, non-overlapping time windows were submitted to the EEMD algorithm, producing twelve levels of IMFs. IMF synchronization measures (mean and maximum coherence, mean and maximum cross-correlation, correlation coefficient and …

Unmanned Ground Vehicle Navigation And Coverage Hole Patching In Wireless Sensor Networks, Guyu Zhang

Doctoral Dissertations

This dissertation presents a study of an Unmanned Ground Vehicle (UGV) navigation and coverage hole patching in coordinate-free and localization-free Wireless Sensor Networks (WSNs). Navigation and coverage maintenance are related problems since coverage hole patching requires effective navigation in the sensor network environment. A coordinate-free and localization-free WSN that is deployed in an ad-hoc fashion and does not assume the availability of GPS information is considered. The system considered is decentralized and can be self-organized in an event-driven manner where no central controller or global map is required.

A single-UGV, single-destination navigation problem is addressed first. The UGV is equipped …

Development, Deployment, And Assessment Of A New Educational Paradigm For Transportation Professionals And University Students, Christopher M. Monsere

TREC Final Reports

Traditionally, engineering coursework has been delivered in a lecture-based format with accompanying exercises assigned for time outside of class. The activity-based approach to learning aims to keep students engaged in and responsible for their own learning processes. This approach has been shown to be more effective than conventional teaching approaches in terms of long-term retention of the educational material.

An Automated Approach To Dynamic Site Layout Planning, Duy Huu Nguyen

Masters Theses

Dynamic site layout planning involves determining the optimum location of resources on the construction site. Site layouts are considered dynamic because construction activities and the number and nature of associated resources change as the project progresses. Previous research has focused on the use of several algorithms to address dynamic site layout problems. These efforts do not enable automated tracking of the dynamic context of construction resources, site space and activities. This research presents an automated adaptive component level system capable of generating layouts which are optimized throughout the phases of construction projects. The system involves the integration of building information …

Cyber-Adaptive Physical Systems For Automated Construction Progress Monitoring And Asset Tracking, Syed Hammad Rasheed

Masters Theses

Despite the benefits of building information models as a means of communication, collaboration and integration in construction projects, their use is often limited to the design and tendering/bidding stage. Potential of building information models lies in its implementation during construction, operations and maintenance phases of a facility’s lifecycle. Tight Integration of building information model and physical facility by means of computational resources is required to achieve this potential such that changes in one environment are automatically reflected in the other. This is termed a cyber-adaptive physical systems approach. This research investigates the applicability of a cyber-adaptive physical systems approach in …

Sci-Tech Book News Reviews, Susan Fingerman

Sci-Tech News

No abstract provided.

A Supplemental Analysis Of Selected Two-Vehicle Front-To-Rear Collisions From The Nass/Cds, Jack Leifer

Engineering Faculty Research

The National Automotive Sampling System/Crashworthiness Database System (NASS/CDS) is a well-known digital repository containing statistics on hundreds of thousands of vehicle crashes that occurred over the past 30 years. Many of the NASS crashes contain estimates of Delta-v calculated using WinSMASH, a common software reconstruction package. Recent work indicates that WinSMASH typically underestimates Delta-v in frontal impacts, and that inclusion of restitution significantly improves the estimate of Delta-v to within 1% of the value recorded on EDR-equipped vehicles [1]. Prior experiments have shown that in front-to-rear collisions, restitution is a strong inverse function of closing velocity (the difference between the …

Impulse, Christie Delfanian, Dave Graves, Kyle Johnson, Karissa Kuhle, Eric Landwehr

Impulse (Jerome J. Lohr College of Engineering Publication)

College:
[Page] 2 Brookings Habitat – House No. 50: A dozen students from a construction class built history this fall.
[Page] 4 Engineers Without Borders: Chapter’s first international service project clears the water.
[Page] 6 REA Mural: Mural depicting advent of electricity in SD still stirs interest.
[Page] 9 Student Internships: From Daktronics to Disney World, students find internships as diverse as their interests.
[Page] 12 BEST Robotics: When it comes to outreach activities, Jackrabbit BEST Robotics is best.
Alumni:
[Page] 15 Alums bring businesses home: SDSU looks to attract businesses to Brookings so more grads stay here.
[Page] 17 …

The Influence Of Social Networking Technology In An Engineering Organization, Derrick Marcus Tepaske

EMSE Doctoral Projects

Computer facilitated Social Networking (SN) is becoming more prevalent in our society, both in our personal and professional lives. As its use grows, there is a desire to determine how it will impact an organization. If it can positively impact an organization then it is an initiative that could be embraced and leveraged for any number of business related activities from marketing to engineering. This project develops and implements a social networking treatment for an engineering organization in order to determine how it impacts the responsiveness and performance of the organization. The treatment includes an online tool, a training package, …

Correlations Between Internal And External Power Outputs During Weightlifting Exercise, Kristof Kipp, Chad Harris, Michelle B. Sabick

Mechanical and Biomedical Engineering Faculty Publications and Presentations

Identifying loads that maximize mechanical power is important because training at such loads may optimize gains in dynamic athletic performance. The purpose of this study was to examine correlations between measures of external mechanical power output and internal mechanical joint power output across different loads during a weightlifting exercise. Ten subjects performed 3 sets of the clean exercise at 65, 75, and 85% of 1 repetition maximum (1RM). Peak external mechanical power output was calculated with 4 commonly used methods, whereas an inverse dynamics approach was used to calculate peak internal mechanical power output for the hip, knee, and ankle …

Comparison Of Biomass To Bio-Oils Reactor Systems: Direct Conversion Vs. Companion Coal Gasification, Alexandra Eicher

Honors Theses and Capstones

It is well known that the United States’ dependence on crude-oil negatively affects its economy, safety, and environment. To alleviate these negative consequences, a more economical and environmentally-friendly source of fuel, such as biomass, should be explored. The conversion of biomass to bio-oils involves the pyrolysis of biomass at about 500°C, thus requiring a great deal of heat. This heat source could be the excess waste heat from a coal gasifier.

As such, this report specifies the design of an industrial plant that produces bio-oils from biomass by using the waste heat from a coal gasifier. It is designed to …

Parameters Influencing Pressure During Pumping Of Self-Compacting Concrete, Dimitri Feys, Geert De Schutter, Ronny Verhoeven

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The Main Difference between Conventional Vibrated Concrete (CVC) and Self-Compacting Concrete (SCC) is Observed in the Fresh State, as SCC Has a Significantly Lower Yield Stress. on the Other Hand, the Placement of SCC by Means of Pumping is Done with the Same Equipment and Following the Same Practical Guidelines Developed for CVC. It Can Be Questioned Whether the Flow Behavior in Pipes of SCC is Different and Whether the Developed Practical Guidelines Can Still Be Applied. This Paper Describes the Results of Full-Scale Pumping Tests Carried Out on Several SCC Mixtures. It Shows Primarily that the Slump or Yield …

Explaining The Hydroclimatic Variability And Change In The Salmon River Basin, Venkataramana Sridhar, Xin Jin, W. Thilini Jaksa

Civil Engineering Faculty Publications and Presentations

Climate change in the Pacific Northwest and in particular, the Salmon River Basin (SRB), is expected to bring about 3–5 °C rise in temperatures and an 8 % increase in precipitation. In order to assess the impacts due to these changes at the basin scale, this study employed an improved version of Variable Infiltration Capacity (VIC) model, which includes a parallel version of VIC combined with a comprehensive parameter estimation technique, Shuffled Complex Evolution (SCE) to estimate the streamflow and other water balance components. Our calibration (1955–1975) and validation (1976–1999) of the model at the outlet of the basin, White …

Assessment Of Surface Energy Balance In Southern Idaho, Beda Luitel

McNair Scholars Research Journal

Proper management of water resources is always a matter of concern in arid regions like southern Idaho such as the Snake River basin where rainfall is limited and the moisture level of atmospheric air is below threshold level most of the time throughout a year. For the proper assessment of water resources it is necessary to quantify the Evapotranspiration (ET) loss in this region and use the available water resources efficiently. A vast quantity of water is moving in the atmosphere under the direct influence of solar energy. So, in order to characterize the behavior of the water cycle, it …

Vineyard Drip Irrigation Design, Roman Ferro

BioResource and Agricultural Engineering

The goal of this project is to develop a cost and water efficient drip irrigation system. This irrigation system will deliver irrigation needs to a future 2.5 acre vineyard owned by the Jaqua family. The design accounts for the specifics of the field such as soil type, slope, crop water requirement, etc. A detailed design was created which includes part specifications, cost estimate and field map.

Broncoblade: An Open Source Wind Turbine Blade Analysis Tool, Alex R. Quinlan

Masters Theses

This thesis reports the development and validation of BroncoBlade, a horizontal axis wind turbine analysis tool. BroncoBlade prepares finite element models and integrates them with an aeroelastic simulator. Analysis results for the SNL100-00 baseline blade are evaluated against reference results published by Sandia National Laboratories. Variations on the SNL100-00 blade incorporating carbon fiber are compared to the baseline blade.

Superplasticity And Microstructural Stability In A Mg Alloy Processed By Hot Rolling And Friction Stir Processing, V. Jain, R. S. Mishra, R. Verma, E. Essadiqi

Materials Science and Engineering Faculty Research & Creative Works

The superplastic behavior of a Mg-1.2 Zn-1.7 Y-0.53 Al-0.27 Mn alloy sheet processed by hot rolling and friction stir processing (FSP) was investigated. The kinetics of superplastic deformation were compared with Mg-3 Al-1 Zn and other Mg-Zn-Y alloys processed by different methods. The FSP Mg-1.2 Zn-1.7 Y-0.53 Al-0.27 Mn alloy exhibits slower kinetics of deformation compared with other alloys. The microstructural stability of the FSP Mg-1.2 Zn-1.7 Y-0.53 Al-0.27 Mn alloy is better than the Mg-3 Al-1 Zn alloy because of the presence of different types of precipitates. © 2012 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

Special Section On Natural Treatment Systems: More Than Just A Solution To Pollution, Joel Gerard Burken

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

No abstract provided.

An Experimental Investigation Of The Stol Performance Of Cal Poly's Amelia In The Nfac, Jonathan Andrew Lichtwardt

Master's Theses

Results from Cal Poly's recent wind tunnel test, during the Winter of 2011-2012, in the 40- by 80-foot test section at the National Full-Scale Aerodynamics Complex (NFAC) at NASA Ames Research Center are presented. AMELIA, the Advanced Model for Extreme Lift and Improved Aeroacoustics, is the first full-span, cruise efficient, short take-off and landing (CESTOL) model incorporating leading- and trailing-edge blowing wing circulation control and over-the-wing mounted turbine propulsion simulators (TPS) to date. Testing of the 10 foot span model proved successful and was the result of a 5 year NASA Fundamental Aeronautics Program Research Announcement. The test generated extensive …

Muscle Synergies Improve Estimation Of Knee Contact Forces During Walking, Benjamin J. Fregly, Jonathan P. Walter, Allison Kinney, Scott A. Banks, Darryl D. D'Lima, Thor F. Besier, David G. Lloyd

Mechanical and Aerospace Engineering Faculty Publications

This study investigates whether use of subject-specific muscle synergies can improve optimization predictions of muscle excitation patterns and knee contact forces during walking. Muscle synergies describe how a small number of neural commands generated by the nervous system can be linearly combined to produce the broad range of muscle electromyographic (EMG) signals measured experimentally. By quantifying the interdependence of individual EMG signals, muscle synergies provide dimensionality reduction for the neural control redundancy problem. Our hypothesis was that use of subjectspecific muscle synergies to limit muscle excitation patterns would improve prediction of muscle EMG patterns at the hip, knee, and ankle …

Sensitivity Analysis Of A Proposed Model For Removal Efficiency Of Trihalomethanes (Thms) Using Spray Aeration, Aidan Cecchetti

Honors Theses and Capstones

Trihalomethanes (THMs) form in drinking water treatment systems as a byproduct of chlorination and are problematic from a public health perspective due to their carcinogenic potential and their potential for additional formation throughout distribution systems. Recently, regulations have tightened on THMs in an attempt to reduce the risk of exposure for consumers at the far ends of distribution systems. Due to widespread use of chlorine and the reluctance of drinking water providers to overhaul current treatment systems, research has been undertaken to investigate post-treatment removal of THMs. One such method is spray aeration, whereby water is recycled in water storage …

Analysis Of Shear Lag In Steel Angle Connectors, Benjamin Sawyer

Honors Theses and Capstones

Previous research has found an empirically based method for calculating the effective net area defined by stress distributions created by tensile loads in steel connections. Based on the results from that method a theoretical alternative is explored to simplify the process of determining the effective net area.

Thermal Performance Analysis Of A Solar Water Heating System With Heat Pipe Evacuated Tube Collector Using Data From A Field Trial, Lacour Ayompe, Aidan Duffy

Articles

This paper presents an analysis of the thermal performance of a solar water heating system with heat pipe evacuated tube collector using data obtained from a field trial installation over a year in Dublin, Ireland. An automated sub‐system was developed and incorporated to control the hot water draw‐offs and electric immersion heater to mimic the operation of solar water heating systems in domestic dwellings. The maximum recorded collector outlet fluid temperature was 70.3^oC while the water temperature at the bottom of the hot water tank was 59.5^oC. The annual average daily energy collected was 20.4 MJd …

Energy-Efficient Failure Recovery In Hadoop Cluster, Weiyue Xu

School of Computing: Dissertations, Theses, and Student Research

Based on U.S. Environmental Protection Agency’s estimation, only in U.S., billions of dollars are spent on the electricity cost of data centers each year, and the cost is continually increasing very quickly. Energy efficiency is now used as an important metric for evaluating a computing system. However, saving energy is a big challenge due to many constraints. For example, in one of the most popular distributed processing frameworks, Hadoop, three replicas of each data block are randomly distributed in order to improve performance and fault tolerance, but such a mechanism limits the largest number of machine that can be turned …

Enhanced Nucleate Boiling On Horizontal Hydrophobic-Hydrophilic Carbon Nanotube Coatings, Xianming Dai, Xinyu Huang, Fanghao Yang, Xiaodong Li, Joshua Sightler, Yingchao Yang, Chen Li

Faculty Publications

Ideal hydrophobic-hydrophilic composite cavities are highly desired to enhance nucleate boiling. However, it is challenging and costly to fabricate these types of cavities by conventional micro/nano fabrication techniques. In this study, a type of hydrophobic-hydrophilic composite interfaces were synthesized from functionalized multiwall carbon nanotubes by introducing hydrophilic functional groups on the pristine multiwall carbon nanotubes. This type of carbon nanotube enabled hydrophobic-hydrophilic composite interfaces were systematically characterized. Ideal cavities created by the interfaces were experimentally demonstrated to be the primary reason to substantially enhance nucleate boiling

Enhanced Diagnostic Accuracy Of Mammograms On A Mobile Device, Sharanya Padmanabhan

Open Access Theses

With the death of a woman every 13 minutes in the US, and one every minute worldwide, due to breast cancer, the need for early detection cannot be overstated. Mammography is a boon for both early detection and screening of breast tumors. It is an imaging system that uses low dose (9mrem) x-rays for examining the breasts, by the electrons reflected from the tissues (thermoelectric effect). However, there are 20% false positives and 10% false negatives in current practice. Hence, there is a critical need for enhancing the accuracy of these mammograms. Towards this, this thesis was aimed at enhancing …

Communication Technology In The Military, Jordan Diehl

Senior Seminars

No abstract provided.

Economic Modeling Of Compressed Air Energy Storage, Yang Gu, James D. Mccalley, Ming Ni, Rui Bo

Electrical and Computer Engineering Faculty Research & Creative Works

Due to the variable nature of wind resources, the increasing penetration level of wind power will have a significant impact on the operation and planning of the electric power system. Energy storage systems are considered an effective way to compensate for the variability of wind generation. This paper presents a detailed production cost simulation model to evaluate the economic value of compressed air energy storage (CAES) in systems with large-scale wind power generation. The co-optimization of energy and ancillary services markets is implemented in order to analyze the impacts of CAES, not only on energy supply, but also on system …