Engineering Commons^™

Participants Perspective Of The Fas Redundant Placement Scheme, Maurice Collins, Robert Morris

Conference papers

The aim of this study is to gather and analyze feedback from participants of a scheme which was put in place in the early stages of the Irish economic recession to provide work placements to redundant Apprentices. As part of the research for this paper a series of qualitative interviews were conducted with partipancts of the FAS Redundant Apprentice Placement Scheme (RAPS). FAS is the authoriity which organises and administers the Statutory Apprentice Scheme in Ireland.The scheme detailed in this study was put in place to aid Apprentices who has been made redundant, to complete phases 3,5 and 7 of …

Cubesat Launch Sequencer, Billy Beecher

Electrical Engineering

I am working with the Naval Postgraduate School to develop a low cost CubeSat launch sequencer for NPSCuL that is designed to operate in low Earth orbit. The system will be capable of providing programmable delays with a minimum delay of one second to a maximum delay of five minutes. Delays must be accurate to within ± 10% or within one second, whichever is less. After the delay, the system will provide the necessary launch signal. To ensure protection from radiation, the system will feature triple redundancy and voting logic stages to ensure that the proper signal is propagated.

Ocean Wave Generator Using Electromagnetic Induction, Sutton Smiley, Adam Mccuistion

Electrical Engineering

No abstract provided.

Off Grid Solar Powered Street Light, Justin Fang, Billy Pham

Electrical Engineering

Street lights are fixtures found in every city and serve the important purpose of illuminating the streets and keeping the roads safe for pedestrians and drivers. Current street lights are powered by the grid, power which is paid for by the taxpayers and could have been used to power homes instead. With this project, our goal is to design and implement an electric power system that collects and stores solar energy, and delivers power to an LED smart street light. The resulting system would reduce street light energy costs by 100% since they would not draw any power from the …

Energy Dashboard Tool For Cal Poly Dormitories, Katie Zombro

Electrical Engineering

This project defines the needs, uses, and future projects (as well as business cases and procurement) of a University Housing dashboard tool, utilized by the Red Brick Dormitories on the Cal Poly campus. This easily accessed tool provides simple information regarding energy trending data, allowing for all student residents no matter their academic discipline, to understand their energy trends and opportunities for reduction. With the Energy Dashboard in place, Cal Poly’s red brick dormitories experienced savings ranging from 10%-20% from the 2011-2012 school year baseline, by the end of the 2012-2013 academic year. With the help of the Dashboard, competitions …

Differential Transformer Protection Using The Sel 387 And Sel 587 Microprocessor Relays, Ryan Chun

Electrical Engineering

The objective of this Senior Project is to use the SEL 387 current differential and overcurrent microprocessor relays to protect three-single-phase 1 KVA 120:208 transformers configured in ∆-∆, Y-Y, Y-∆, and ∆-Y connections. In the second phase of this project, is to create a functioning lab that uses the SEL 587 relay to teach basic differential transformer protection for the upcoming EE-444 students.

The protection schemes developed in both of the senior project phases require the use of differential and overcurrent protection elements by monitoring the changes of the input and output current through the transformer. When these currents fail …

Design Of Improved Distribution Panel For The Dc House, Nolan Joksch

Electrical Engineering

The DC House is a humanitarian project intended to provide electricity to rural areas that would benefit from electricity, but are too remote to have access to it. This particular project is to design and construct the feeder box for the electrical distribution system to distribute power to the system as well as protect it. Building an electrical panel that is easily maintained and, above all, safe for the user is key to this project.

Merry-Go-Round Human Powered Generator, Daniel Barnicle, Dario Romero

Electrical Engineering

This project entails the design and construction of a Merry-Go-Round Human Powered Generator for the DC House project. The Merry-Go-Round Human-Powered-Generator is a sustainable project focusing on utilizing renewable human mechanical energy. As young children play on the Merry-Go-Round, the generator converts the mechanical energy to electrical energy for the DC House. The Merry-Go-Round Generator boosts the generated voltage output to power a battery. This electrical energy then transfers from the battery to the DC House to provide power to it.

Assessment For Completion Of Cp7 Integration With Revision 6 Avionics, Daniel Jennings

Electrical Engineering

he purpose of this project is the continuation of the CP7 CubeSat project, analysis for integration with new Avionics Systems, and to leave behind instruction for future work for completion of the satellite. CP7 is a satellite in development to support a mechanical and electrical system to experiment on particle damping in micro-gravity. The completion of this satellite needs to be prioritized more than it has been by the PolySat team to honor our work with Northrop Grumman, who have been supportive and helpful throughout the process. This work seeks to aid in the completion of this satellite, so that …

Broadband, Rugged, High Linearity, Low-Noise Amplifier, Shane Smith

Electrical Engineering

This report examines the application of a low-noise amplifier module for a Global Positioning System (GPS). This low-noise amplifier module helps allow the carrier signal to get the amplification needed to give a smoother analog to digital conversion. However, the frequency range of the GPS spectrum reaches up to 1.6GHz, where component noise becomes an issue and can create a disrupted signal. This low-noise amplifier needs to create a reasonable gain, while achieving a low noise figure. An amplifier with high gain and low noise figure becomes difficult because they create a design trade-off, higher the gain brings higher the …

Alternative Wheelchair Control System, Jessica Hendricks, Tara Keigharn

Electrical Engineering

We geared this project towards assisting an individual with limited[1] motor function to operate a wheelchair. The product targets individuals who find use of a joystick is ineffective or painful. We focused our design on the wheelchair bought from Adaptive Driving Systems (Driving, 2013); but ultimately we would like to field a final product capable of applying to any electric wheelchair. Our goal: a person to operate the electric wheelchair using sensors that transmit a translation of an individual’s hand movement through a wireless transmission to a microcontroller installed on the wheel chair that then controls the wheelchair’s movement. …

Wind And Hydroelectric Power Simulation For The Dc House Project, Randy Lormand, Christopher Goloskie

Electrical Engineering

This project details the design and integration of a wind and hydroelectric power simulation system in correlation with the DC House Project. The simulator uses variable speed drives to rotate a DC motor which then drives a generator to produce output. This output is then regulated using a DC to DC converter which holds the voltage level constant making it easier to interface with other power sources for the house. The test results indicate that the simulator will be able to produce two separate power outputs that will provide at least 70 Watts of power in the acceptable speed range …

Buddy: A Breathalyzer For Iphone, Douglas Blaalid, Brandon Bevans

Electrical Engineering

Buddy is a Breathalyzer for the iPhone designed to be more a product than a project. Through proprietary hardware and a custom iOS application, Buddy provides users with a previously untapped link from the alcohol in their body to the display on their phones. Buddy uses an alcohol sensor connected to an Arduino Uno to accurately detect the BAC of the user’s breath. The BAC is then transmitted to an iPhone via the headphone jack where it is displayed and logged in a captivating app. The finished prototype successfully measured the approximate BAC of intoxicated users. The product website has …

High Frequency Open Air Optical Communication System, Alexander C. Wolff

Electrical Engineering

The goal of this project is to create a wireless optical communication system that operates at high frequencies (up to 3 GHz). The system will function by taking a digital electric input signal, converting it to a photonic signal, recovering the signal at the other end of a short distance (~1 foot) and converting it back into a digital signal. Unlike the more common fiber-optic data transmission systems, this system will transmit light through air, instead of fiber, as its medium. Doing so will have the benefits of a wireless system combined with the benefits from an optical system, including …

Spread Spectrum Jamming - Part 2, Casey Burke, Christian Hume, Javier Meza

Electrical Engineering

Direct-sequence spread spectrum (DSSS) is a special modulation technique used in many telecommunication devices which uses a wide bandwidth relative to single-frequency carrier modulation techniques. Like the name suggests, the spectral content of wireless signals are spread across a range of frequencies to increase the security of transmitted signals by reducing the potential impact of outside interference (i.e. noise, jamming). This resistance against outside interference and jamming has particular application in the field of electronic warfare where spread spectrum jamming techniques may prove to be an effective way of shutting down remotely controlled enemy vehicles.

Last year, a group of …

Swing Human Powered Generator: For The Dc House Project, Juan Vicente Avelar, Juan Jose Galindo, Juan Pramyr Ramos

Electrical Engineering

The Play Park Human Powered Generator project addresses various ways of generating power. More specifically, this project entails the design and construction of the Swing Power Generator to provide electrical power from mechanical energy. The swing generator will eventually be used as part of the human-powered generators utilized in the DC House project.

A swing generator prototype was built for this project, which demonstrates the feasibility of its use for electrical power source. Detailed design and construction of the swing generator is presented in this report along with results from hardware testing.

Airport Runway Heating System, Greg Wang, Curtis Reedy

Electrical Engineering

According to the Federal Aviation Administration, flight delays cost airlines $22 billion annually (Rapajic 16). Snow and ice buildup on the tarmacs are a major contributor to these delays in regions where freezing weather conditions are common. Current solutions such as anti-freeze chemicals and snowplows are ineffective and costly. Implementing a radiant heating system, specifically pipes running hot liquid within or below the runways, can help maintain the surface above freezing temperatures. Such a system has yet to be installed in a functioning airport because of its complexity and high cost. However, the FAA provides funding for infrastructure improvements, and …

Near-Infrared Optical Imaging For Monitoring The Regeneration Of Osteogenic Tissue-Engineered Constructs., Elizabeth A. Cowles, Joy L. Kovar, Evan T. Curtis, Huihui Xu, Shadi F. Othman

All Faculty Articles - School of Engineering and Computer Science

Millions of cases of bone injury or loss due to trauma, osteoporosis, and cancer occur in the United States each year. Because bone is limited in its ability to regenerate, alternative therapy approaches are needed. Bone tissue engineering has the potential to correct musculoskeletal disorders through the development of cell-based substitutes for osteogenic tissue replacement. Multiple medical imaging techniques such as magnetic resonance microscopy (MRM) were investigated recently; these techniques are able to provide useful information on the anatomical and structural changes of developing bone. However, there is a need for noninvasive approaches to evaluate biochemical constituents and consequent compositional …

Spin-Valley Lifetimes In A Silicon Quantum Dot With Tunable Valley Splitting, C. H. Yang, A. Rossi, R. Ruskov, N. S. Lai, F. A. Mohiyaddin, S. Lee, C. Tahan, Gerhard Klimeck, A. Morello, A. S. Dzurak

Birck and NCN Publications

Although silicon is a promising material for quantum computation, the degeneracy of the conduction band minima (valleys) must be lifted with a splitting sufficient to ensure the formation of well-defined and long-lived spin qubits. Here we demonstrate that valley separation can be accurately tuned via electrostatic gate control in a metal-oxide-semiconductor quantum dot, providing splittings spanning 0.3-0.8 meV. The splitting varies linearly with applied electric field, with a ratio in agreement with atomistic tight-binding predictions. We demonstrate single-shot spin read-out and measure the spin relaxation for different valley configurations and dot occupancies, finding one-electron lifetimes exceeding 2 s. Spin relaxation …

Towards Operations Excellence: Optimising Staff Scheduling For New Emergency Department, Amr Arisha, Waleed Abo Hamad

Conference papers

This paper presents a case study of an Emergency Department of a public hospital in Dublin, and uses an integrated approach to determine optimal staffing levels to meet the challenges of its dynamic patient demand levels. A comprehensive stochastic model is developed to incorporate patients care pathways and the resources required along their treatment journeys. Analytical Hierarchical Process is utilised to enable decision makers to set their preferences for the facility’s strategic objectives. Evolutionary algorithms are applied to optimise staff schedules. The resulted optimized schedules maintains continuity of care delivery for patients while ensuring a balanced equilibrium among available staff.

High Voltage Waveform Sensor, Nathan Stump

Computer Engineering

The purpose of this project was to build a system to measure the voltage waveform of a discharging railgun. Another group of students had built a railgun system to simulate micro asteroid impacts in low Earth orbit. The only instrumentation available to them was an analog voltmeter attached to the capacitor banks. During the lengthy (30 to 45 minute) charging process, an analog voltmeter was more than capable of measuring the voltage. However, during the discharging process the time elapsed was so short (approximately one millisecond) that waveform data could not be captured. In order to measure power dissipation during …

Nissan Leaf On-Board Diagnostic Bluetooth Utility, John Allande, Philip Tyler, Eric Woodruff

Computer Engineering

The team’s sponsor, John Dunning, owns an Electric Vehicle. The electric vehicle market is young, as is the research and testing on the cars themselves. Most EV owners know the most expensive component in their vehicles is the battery, and would like to know when the battery will fail. By experimenting with data from the OBD II port in Dr. Dunning’s Nissan Leaf (2013 EV) the team will create a Android app to interface with a Bluetooth module to receive OBD data. The program will collect data focused on battery pack voltage, battery pack current, motor RPM, and state of …

Inform 7 Usability Precompiler, Chad Robert Brantley, Timothy Phan

Computer Engineering

Inform 7 Usability Precompiler or I7UP is a project which helps Inform 7 authors with their stories by diversifying the possibilities in the author’s interactive fiction. I7UP reads and analyzes the Inform story that is passed in through python and natural language processing then provides the user with a selection of choices to add to his story and lastly automatically generates the corresponding Inform 7 code. By utilizing the combination of Python, Django, and HTML/CSS, I7UP is able to provide an easytouse interface which helps generate additional "Understand" statements and "Conjugated Verb" statements. I7UP is an authoring aid for Inform …

Automatic Text Analysis Using Drupal, Herman Chai

Computer Engineering

Natural language processing (NLP) is a field of computer science that is concerned with the interpretation of human language by computers. NLP has a multitude of different applications in the fields of computer science, artificial intelligence, and linguistics. The Automatic Text Analysis Using Drupal project is intended to increase the availability of NLP tools that can be easily used by the general public. By integrating a front-end content management system like Drupal with different back-end NLP applications, users can receive automatic analysis of their text without knowledge of the system.

Real Time Rendering Engine, Kevin Ubay-Ubay

Computer Engineering

Entertaining and playable content in computer graphics requires real time rendering. Real time rendering essentially demands that frames need to be rendered within milliseconds in order to deliver an interactive experience for the client. Video games are an example of such a medium that needs real time rendering. Without frame rates in the realm of real time, video games cannot deliver an enjoyable experience. Behind virtually every video game is an engine. The architecture of video game engines usually comprises of sub engines that are specifically designed to handle physics, audio, user input and rendering. The purpose of this project …

Set-Top Box Simulator, Philip Tyler

Computer Engineering

This report presents a python-based Set-top box simulation program utilizing a Simulation library called SimPy (See Appendix 1) to simulate real-time operation of a Set-top Box, or DVR. A graphical user interface, designed with PyQt4, allows a user to customize many simulation parameters such as hard drive speeds, buffer sizes, length of simulation, etc. The GUI also shows the user any errors that occur during the simulation such as buffer overflows/underflows. The results of this simulator lie within 85%-95% accuracy depending on the user-input parameters. With this simulation program, a Set-top box hardware or firmware developer can interchange the scheduling …

Human Powered Vehicle Bike Computer, Eric Yaklin, Bradley Shellnut

Computer Engineering

This project is a bike computer system built for Cal Poly’s Human Powered Vehicle Team. It was designed and built using Arduino and Android programming tools. The project consists of an Arduino Uno used to collect bike data (such as speed, temperature and GPS location) and an Android Application used to display this data in real time and save it to user profiles within the application. Although many bike computers already exist, this project was specifically designed to be used in a team racing environment rather than for individual use.

Programming Tools For Artificial Intelligence Classes, Christopher Mckee

Computer Engineering

This project was begun in Winter of 2013 at California Polytechnic State University by myself, Christopher McKee, and was advised by Foaad Khosmood. The main goal of this project was to create an alternative to a current program that was being used in the Artificial Intelligence course on campus. The previous program used Java to create a Graphical User Interface (GUI) for students to use when learning how to create the various intelligent agents. In the versions created within the scope of this project, one of the environments used Java as the programming language, while the other two environments leveraged …

Channels: Easy Video Content Consumption, Alexander R. Ledwith

Computer Engineering

The idea for this project is to take a user’s digital movie and television show library, and organize the individual videos into lists that will continuously and concurrently play like cable TV channels. This means that when a list of channels is switched to, video content will automatically start playing, possibly in the middle, based on a schedule. It should serve the needs of the user by allowing the user to quickly watch any of their existing channels, easily add a new channel based on chosen criteria or manual selection, and easily add new video content. In addition, the product …

Fit For Green Online Notification And Reporting System, Alexander Spotnitz

Computer Engineering

Fit for Green seeks to combat two main threats on the American home front: obesity and the energy crisis. This project is an online Notification & Reporting System that allows gym administrators using the Fit for Green solutions the ability to instantly generate reports and have those reports emailed to them on a scheduled (daily or weekly) basis. The reports contain metrics pertinent to the gym (e.g. one metric may be Average Power Generated per Workout Session).