Engineering Commons^™

Measurement Of Steel Corrosion In Bridge Decks By Impedance Spectroscopy, Paul Bartholomew, Dr. Brian Mazzeo

Journal of Undergraduate Research

On bridge decks, a specified thickness of concrete cover, usually between 2.0 and 3.0 in., is provided over the embedded reinforcing steel as a protective layer. When chloride ions penetrate the concrete cover, corrosion of the reinforcement can occur [1, 2, 3]. Corrosion problems are usually exacerbated in cold regions, where the source of chlorides is usually deicing salts applied to roads during winter conditions to melt ice, and in coastal regions, where exposure to sea water is prevalent. Since corrosion products are generally five to seven times greater in volume than the parent steel, the corrosion process can induce …

Modular Containerized Provisional Habitations For Emergency Disaster Relief, Matthew Butler, Brian Capt

Journal of Undergraduate Research

Perhaps the greatest challenge to this project was determining which materials to use in the construction of the modules. There are a multitude of materials that could have been used for the project, many of which might have worked well for the designated use. The shelters have a specific set of criteria that required several different properties that the material had to fill, including: (a) price—it needed to be fairly inexpensive to purchase and ship to a shipping container assembly area, (b) durability—the panels that make up the module must be made from a material that can support itself, the …

Mechanical Engineering News, Georgia Southern University

Mechanical Engineering: News & Publications (2013-2023)

• ME Students Win EPA National Competition

• Dr. Soloiu awarded $360,000 National Science Foundation Grant

Selective Nanoparticles For Antimicrobial Therapies And Mri Diagnostics, Mark Andrew Hoppens

LSU Master's Theses

Early diagnosis and treatment of an infection and the selectivity of the treatment method are three parameters, which if optimized will greatly enhance a patient’s prognosis. Thus these three components have been, and continue to be extensively studied. Advances in biosynthesis and nanofabriciation have provided researchers with new tools with which to improve diagnostic and therapeutic techniques. Of these, inorganic nanoparticles (NPs) have shown great promise. Metallic nanoparticles have been demonstrated to successfully serve as antimicrobials, platforms for the transportation of therapeutic molecules, CT and MRI contrast agents, and thermal ablation. The recent paradigm of theranostics proposes substances that serve …

Cellular Automata In Cryptographic Random Generators, Jason Spencer

Technical Reports

Cryptographic schemes using one-dimensional, three-neighbor cellular automata as a primitive have been put forth since at least 1985. Early results showed good statistical pseudorandomness, and the simplicity of their construction made them a natural candidate for use in cryptographic applications. Since those early days of cellular automata, research in the field of cryptography has developed a set of tools which allow designers to prove a particular scheme to be as hard as solving an instance of a well-studied problem, suggesting a level of security for the scheme. However, little or no literature is available on whether these cellular automata can …

Educating For Evidence Based Decisions In Engineering: The View As Librarian And Instructor, Amy S. Van Epps

Libraries Faculty and Staff Scholarship and Research

The First Year Engineering program at Purdue University is regularly reviewed and revised to adapt to the needs of the students, feedback from teaching faculty, and the changing needs of the university curriculum. In the last year, a unifying theme was added to the class to help tie all the different activities together. That theme was “evidence based decision making in engineering”, a perfect fit for introducing and discussing information literacy many times throughout the semester, rather than in a single, isolated session.

As instructor for one section of the class, the author identifies benefits to including this message throughout …

Experiments With Gmti Radar Using Micro-Doppler, Benjamin Walter Dilsaver

Theses and Dissertations

As objects move, their changing shape produces a signature that can be measured by a radar system. That signature is called the micro-Doppler signature. The micro-Doppler signature of an object is a distinguishing characteristic for certain classes of objects. In this thesis features are extracted from the micro-Doppler signature and are used to classify objects. The scope of the objects is limited to humans walking and traveling vehicles. The micro-Doppler features are able to distinguish the two classes of objects. With a sufficient amount of training data, the micro-Doppler features may be used with learning algorithms to predict unknown objects …

Lifting-Line Predictions For Induced Drag And Lift In Ground Effect, W. F. Phillips, Doug F. Hunsaker

Mechanical and Aerospace Engineering Faculty Publications

Closed-form relations are presented for estimating ratios of the induced-drag and lift coefficients acting on a wing in ground effect to those acting on the same wing outside the influence of ground effect. The closed-form relations for these ground-effect influence ratios were developed by correlating results obtained from numerical solutions to Prandtl's lifting-line theory. Results show that these influence ratios are not unique functions of the ratio of wing height to wingspan, as is sometimes suggested in the literature. These ground-effect influence ratios also depend on the wing planform, aspect ratio, and lift coefficient.

Momentum Theory With Slipstream Rotation Applied To Wind Turbines, Doug F. Hunsaker, W. F. Phillips

Mechanical and Aerospace Engineering Faculty Publications

A momentum theory which includes the effects of slipstream rotation for wind turbines is presented. The theory accounts for the axial and radial pressure gradients within the slipstream as well as the wake expansion caused by wake rotation. Because of the limiting approximations of previous methods, the effects of slipstream rotation have not been accurately realized. The method included here, which does not suffer from the unrealistic approximations of previous methods, predicts that the effects of slipstream rotation are manifest entirely through an increase in the turbine thrust coefficient. The method predicts, as previous methods do, that the Lanchester-Betz-Joukowski limit …

Decomposed Lifting-Line Predictions And Optimization For Propulsive Efficiency Of Flapping Wings, W. F. Phillips, R. A. Miller, Doug F. Hunsaker

Mechanical and Aerospace Engineering Faculty Publications

A decomposed Fourier series solution to Prandtl's classical lifting-line theory is used to predict the lift, induced-thrust, and power coefficients developed by a flapping wing. A significant advantage of this quasi-steady analytical solution over commonly used numerical methods is the utility provided for optimizing wing flapping cycles. The analytical solution involves five time-dependent functions that could all be optimized to maximize thrust, propulsive efficiency, and/or other performance measures. Results show that by optimizing only two of these five functions, propulsive efficiencies exceeding 97% can be obtained. Results are presented for untwisted rectangular wings in pure plunging, rectangular wings with linear …

Spinning Objects In A Shallow Bath: Eggs In Milk, Kenneth Langley, Dr. Tadd Truscott

Journal of Undergraduate Research

If an egg spinning on a counter-top passes through a shallow pool of milk, a thin film of milk will be drawn up the sides of the egg and sprayed on the counter-top. This phenomenon is not limited to eggs or milk. In fact, when any axis-symmetric object is spun in a shallow bath of fluid, this phenomenon occurs in which fluid flows up the object and is then ejected at the maximum radius. This phenomenon lends itself well as a pump for moving fluids from very shallow areas to other regions and can even be used to make droplets …

Combustion-Driven Water Heating In Huatta, Peru: A Solution For Third-World Countries, Brandon Decker, Dr. Matt Jones

Journal of Undergraduate Research

This group aimed to construct a system that heated water to at least 38°C (100 OF) – warm enough for bathing, dish washing, and washing hands. Our goal was to create a system inexpensive and simple enough for implementation in Huatta, Peru. We also aimed to make the system sustainable and replicable.

Forked Shaped Rebound Droplet For Impingement On Anisotropic Superhydrophobic Surfaces, David Bilodeau, Dr. Daniel Maynes

Journal of Undergraduate Research

Many metals rust when exposed to moisture and that rusting can cause the item that is made of that metal to break down. A superhydrophobic surface can repel liquids and keep metals from rusting longer. Superhydrophobic surfaces have existed in nature for a long time but are just beginning to be understood and manufactured for societal applications. They are manufactured by micro-texturing a surface that is either made from specific materials or is coated with a different material after the micro-texturing (see Figure 1). Both the material and the micro-geometry are important parameters in the surface‟s ability to repel liquids. …

An Improved Estimation Of Passive Wrist Stiffness Using Various Techniques, Will Drake, Dr. Steven Charles

Journal of Undergraduate Research

The wrist plays a vital yet frequently overlooked role in positioning and supporting the hand during activities of daily living. Particularly during low-level activities (such as typing), passive joint stiffness dominates wrist dynamics and constitutes the main obstacle to motion. In spite of its importance, however, little consensus exists as to the exact range of passive wrist stiffness. Reported values vary from as little as 0.002 Nm/rad (Lehman & Calhoun, 1991) to as many as 9.0 Nm/rad (Crisco et al, 2010), a span of three orders of magnitude! The purpose of this research is to determine an approximate single-order-of-magnitude range …

Stand-Alone Lance For Nanoinjection Of Dna, Mark Fernelius, Dr. Larry Howell

Journal of Undergraduate Research

Technologies for injecting DNA into egg cells have greatly facilitated genetic research. Microinjection is a current standard for this purpose. It uses a hollow glass needle to inject a solution containing DNA into cells. Although widely used, microinjection has several significant challenges. First, the DNA can be damaged when forced through the small opening of the needle. Second, the cell can die from the physical trauma caused by the microinjection needle piercing the cell membrane. Third, the cell can split open because of the increased internal pressure caused by injecting fluid into the cell. Brigham Young University has developed nanoinjection …

Updates To A Sequence Of Thermodynamics Experiments For Mechanical Engineering Technology Students, Roger A. Beardsley

All Faculty Scholarship for the School of Graduate Studies and Research

This paper presents an outline of thermodynamics experiments and lab activities that accompany the introductory thermodynamics course for Mechanical Engineering Technology juniors at Central Washington University (CWU) in Ellensburg, Washington. It outlines and describes the current suite of thermodynamics lab activities, comparing the current suite of seven lab activities to a sequence outlined in an ASEE conference paper presented in 1995. Some lab activities in that paper have been replaced, while others have been updated. For example an experiment to measure the Joule-Thomson coefficient has been replaced with a First Law energy balance activity and the former First Law experiment …

Public Works For Public Learning: A Case Study, Thalia Anagnos, Beckey Carroll, Shannon Weiss, David Heil

Faculty Publications

Large scale and small scale public works projects are important in the smooth operation of every community, yet a majority of the population has little awareness of how these projects work and what their functions are. Few non-engineers understand the engineering challenges of delivering clean water, disposing of our sewage, or changing a traditional intersection into a round-about, a project that seems quite simple on the surface. A consortium of public works engineers, science museums, faculty, and exhibit evaluators were awarded a grant by the National Science Foundation to build an outdoor museum next to a large suspension bridge. The …

The Arrows In Our Backs: Lessons Learned Trying To Change The Engineering Curriculum, Steven W. Villachica, Anthony Wayne Marker, Donald Plumlee, Linda Huglin, Amy Chegash

Organizational Performance and Workplace Learning Faculty Publications and Presentations

Published research has provided a robust set of documented tools and techniques for transforming individual engineering courses in ways that use evidence-based instructional practices. Many engineering faculty are already aware of these practices and would like to use them. However, they still face significant implementation barriers. The E²R2P effort addresses the question: How can successes in engineering education research translate into widespread instructional practice?

This poster session will describe hard-won lessons the E²R2P team has learned as it begins its third year attempting such curricular change.

Lesson 1: “Wonder workshops” and visible course redesigns don’t produce …

Project Based Learning In Engineering Economics: Teaching Advanced Topics Using A Stock Price Prediction Model, Lizabeth Schlemer

Industrial and Manufacturing Engineering

A graduate level advanced engineering economics class taught at California Polytechnic State University, San Luis Obispo, includes a thorough review of time value of money, investment evaluation, inflation, risk and return, financing decisions, corporate investment strategies, risk analysis and decisions incorporating non-monetary considerations. Historically this course was taught using an advanced text where the topics were covered sequentially. A redesign of the course now includes the construction of a stock price prediction model for a company of the student’s choice. Through the model, the topics are covered and discussed in the context of the large model-building project. For instance, inflation …

Quantitative Assessment Of Program Outcomes Using Longitudinal Data From The Fe Exam, Joe C. Guarino, James R. Ferguson, V. Krishna C. Pakala

Mechanical and Biomedical Engineering Faculty Publications and Presentations

There have been many studies providing details on using results from the Fundamentals of Engineering (FE) exam as metrics for meeting ABET program outcomes¹. However, implementing an FE-based set of metrics poses challenges not limited to assessing validity of results. Programs using FE-based metrics must also determine the position of the metrics in the overall assessment process. We present a method for using FE-based metrics as an integral part of the ABET program assessment process. The principle issues we address are: (1) The validity of using FE metrics for a group of graduating students when not all of …

Measuring The Impact Of Internships On Design Using A Materials Activity, Craig Johnson, Charles O. Pringle, Nathan Davis

Engineering Technologies, Safety, and Construction Faculty Scholarship

Our research question focused on how previous student experience, like a job internship, affects an ability to demonstrate engineering design skills. Principal student experience focused on prior industrial experience (e.g. internships), but also included annual project participation (e.g. ASME Design Challenge Teams). The scope of this effort included the creation and application of a design activity, resulting in documents that were evaluated with a metric. The activity focused on the effect of material selection and analysis with regard to ‘design performance’. Creating these activities, and using them to assess design skills is the novel aspect of this effort. Two classes …

Incorporating Active Learning Into A Thermal System Publications Lecture, Jennifer M. Peuker, Steffen Peuker

Mechanical Engineering

Many mechanical engineering departments offer a thermal system design (or similar) course for senior students. Some courses have a laboratory component, but many are a lecture only format. This paper demonstrates how active learning—through virtual labs, a semester long project, and in-class assignments—was incorporated into the lecture portion of a thermal system design course to enhance learning and provide the students a laboratory experience without a physical laboratory. These active learning ideas can also supplement the learning during lecture for those courses which have a designated laboratory time. Anecdotal evidence of the activities indicates that students were engaged and enjoyed …

Effect Of Multiple Choice Testing On Student Performance In An Introductory Engineering Course, Jennifer M. Peuker, Jennifer Mcferran Brock, Steffen Peuker

Mechanical Engineering

This study aims to compare student performance on introductory engineering statics material by comparing the exam scores of students who are given both multiple choice (MC) questions and constructed response (CR) questions to see whether the type of exam question makes a difference in student performance and understanding. Seventy-five students in an introductory engineering course did either a MC version or a CR version of each statics problem, resulting in MC answers and a control group of CR answers to each statics problem. The students were also polled for feedback regarding their preferences of test question format at the end …

Student Industry Cooperation For The Development Of Thermal System Design Teaching Laboratory Equipment, Steffen Peuker

Mechanical Engineering

In higher education, hands-on undergraduate education using state-of-the-art laboratory equipment is important to meet the quality standards expected in the engineering profession. However, the development of modern engineering laboratories is not only time consuming, but also budget constraints can hamper the development of needed laboratories for instructional purposes as Bidana and Billo state: "Development of state-of-the-art engineering laboratories is becoming an increasing problem in the University environment. Due to the greater variety and increased complexity of much state-of-the-art hardware and software, the cost and cycle time for development and startup of a modern engineering laboratory can be excessive. This, together …

Intradepartmental Collaboration To Improve The Quality Of Engineering Drawings Created By Students In Senior Design Project, Andy S. Zhang, Gaffar Gailani

Publications and Research

Engineers use engineering graphics to describe their design, to exchange ideas, and to communicate with others. As an important communication tool, most engineering department commits at least two courses on engineering graphics. The mechanical engineering technology at the college offers three engineering graphics courses for its associate degree program. The objective is to give students opportunity to get familiar with different type of engineering graphics from 2D to 3D and from general graphics to mechanical engineering specific graphics gradually so they can apply these engineering graphics skills in their senior courses such as in machine design. Despite the extensive offering …

Attracting College And High School Students To Study Engineering Technology Through Hands-On Mechatronics Product Design Projects, Andy S. Zhang, Sidi Berri, Iem H. Heng, Farrukh Zia

Publications and Research

Attracting College and High School Students to Study Engineering Technology Engineering technology encompasses many engineering technology fields: mechanical engineering technology, electrical engineering technology, and computer engineering technology, etc. This poster presents the work on using hands-on mechatronics design activities to attract high school and college students to study engineering technology. Technology education has been a key in producing college graduates to work in today’s fast paced, highly competitive public and private enterprises. Unfortunately, the supply of qualified workforce has been reduced in the United States due to the steady drop of enrollment of college and high school students in STEM …

Public Works Projects As Vehicles For Engineering Education And Outreach, Shannon Weiss, David Heil, Thalia Anagnos

Faculty Publications

America is built on small and large feats of public works engineering that, although often taken for granted, affect almost every aspect of our daily lives. So how can we celebrate these marvels of utilitarian infrastructure and use them to teach public audiences about the engineering principles, materials, and human innovations that make them possible? This case study will share how one project addressed these questions by leveraging informal learning strategies, multi-agency collaborations, and new media technologies to explain the history and engineering of one of the world’s most recognizable public work sites: the Golden Gate Bridge. This paper will …

Curriculum Exchange: “Make Your Own Earthquake”, Sandra Seale, Thalia Anagnos, Lelli Van Den Einde

Faculty Publications

A consortium of American universities is involved in earthquake engineering practice and research. Each campus of the consortium participates in outreach and education activities for the local schools and the public. One campus of the consortium, which operates earthquake field sites, designed a K-12 activity called “Make Your Own Earthquake” (MYOE). MYOE involves setting up earthquake field equipment (seismic instruments, data loggers, and computers) in a classroom. Children jump for 10 seconds, see their earthquake trace live on a computer screen and then take home a printed copy of their personal earthquake. Software was developed specifically for this activity. MYOE …

Curriculum Exchange: Visualization Tools And Online Courses For Teaching About Earthquakes, Sandra Seale, Thalia Anagnos

Faculty Publications

As part of a national consortium of universities practicing and doing research in earthquake engineering, our site has developed several videos for use in outreach and education. Visualization tools are extremely useful when teaching about how earthquakes shake the ground and the response of buildings to that shaking. Here we present videos that are targeted to specific audiences: (1) Animations of the response of two model buildings to two earthquakes are targeted at grade 6-16 students. The videos were created with data recorded on these test structures from the two earthquakes. The two events were both located directly below the …

Computer Aided Design Of Permutation, Linear, And Affine-Linear Reversible Circuits In The General And Linear Nearest-Neighbor Models, Ben Schaeffer

Dissertations and Theses

With the probable end of Moore's Law in the near future, and with advances in nanotechnology, new forms of computing are likely to become available. Reversible computing is one of these possible future technologies, and it employs reversible circuits. Reversible circuits in a classical form have the potential for lower power consumption than existing technology, and in a quantum form permit new types of encryption and computation.

One fundamental challenge in synthesizing the most general type of reversible circuit is that the storage space for fully specifying input-output descriptions becomes exponentially large as the number of inputs increases linearly. Certain …