Engineering Commons^™

Fadec Advances Allow Better Engine Performance, Nihad E. Daidzic

Aviation Department Publications

No abstract provided.

Investigating Various Propulsion Systems For An External Attachment For A Controlled-Manual De-Orbit Of The Hubble Space Telescope, Nelson De Guia

Aerospace Engineering

This reports explains the results for a proposed senior project. This project concerns the Hubble Space Telescope, and exploring the possibility of having an external propulsion attachment for a manual de-orbit. The Hubble Space Telescope was proposed to return to Earth via the Space Shuttle. Although, through the current U.S. Space Administration, the Space Shuttle has been retired before the Hubble Space Telescope was retrieved. By completing this project, the results could provide insight to what type of propulsion would best de-orbit the Hubble upon its retirement. Different propulsion systems were considered to attempt to determine an optimal attachment, varying …

Aerial Deployable Autonomous Solar Powered Glider, Brandon Groshong, Jacob Ohana

Aerospace Engineering

Awareness of green solutions to powered flight is a new trend taking the Aerospace Industry by storm. One particular application that shows high promise is that of photovoltaics on small UAV-type aircraft to help extend flight time. The purpose of this report is to document both research and experimentation performed on a small RC aircraft in order to better understand the electrical requirements of such a device. Using that research, speculation on how it can be used to design a mobile Aerial Deployable Autonomous Solar Powered Glider will be performed. Technologies such as CIGS solar cells and Lithium Polymer batteries …

Feasibility Analysis For Electrically-Powered Hoverboard, Cameron Chan, Jason Cortez, Jay Lopez

Aerospace Engineering

Composite materials are engineered by combining two or more constituent materials with significantly different physical or chemical properties in such a way that the constituents are still distinguishable, and not fully blended. Due to today’s high rising prices of gasoline and aviation fuel costs, many manufacturers have turned to the use of lightweight composites in their designs due to the advantages of the composite material, which include outstanding strength, excellent durability, high heat resistance, and significant weight reduction that the composite material properties hold. The purpose of this project is to design and construct a composite structure for an electrically-powered …

Bulding 192, Engineering Iv, Cal Poly, San Luis Obispo, Mark Ferraresi

Fire Protection Engineering: Culminating Experience Project Reports

This report presents a fire and life safety analysis of Engineering IV. This analysis includes a review of prescriptive code requirements per the International Building Code, 2009 Edition and other applicable codes and standards; a description of the current fire and life safety systems or features in place; a prescriptive.based analysis; and a performance.based analysis. Beyond typical fire protection systems, such as means of egress systems and structural fire protection, Engineering IV was found to an automatic fire alarm and notification system, an automatic sprinkler system, and smoke control features. The systems and features surveyed were found to be within …

Stack Aware Threshold Voltage Assignment In 3-D Multicore Designs, Koushik Chakraborty, Sanghamitra Roy

Electrical and Computer Engineering Faculty Publications

Due to the inherent nature of heat flow in 3-D integrated circuits, stacked dies exhibit a wide range of thermal characteristics. The temperature of dies progressively increases with increasing distance from the heat sink. This heterogeneous temperature profile coupled with the strong dependence of leakage on temperature and process variation plays havoc in achieving system level energy efficiency in such systems, complicating the task of power provisioning in 3-D multicores. In this paper, we address this power provisioning challenge in 3-D ICs by advocating a novel stack aware microprocessor design paradigm, where the circuit designers are aware of the intended …

Privacy Protection Framework With Defined Policies For Service-Oriented Architecture, David S. Allison, Miriam Am Capretz, Hany F. Elyamany, Shuying Wang

Electrical and Computer Engineering Publications

Service-Oriented Architecture (SOA) is a computer systems design concept which aims to achieve reusability and integration in a distributed environment through the use of autonomous, loosely coupled, interoperable abstractions known as services. In order to interoperate, communication between services is very important due to their autonomous nature. This communication provides services with their functional strengths, but also creates the opportunity for the loss of privacy. In this paper, a Privacy Protection Framework for Service-Oriented Architecture (PPFSOA) is described. In this framework, a Privacy Service (PS) is used in combination with privacy policies to create privacy contracts that outline what can …

Peridynamic Models For Dynamic Brittle Fracture, Wenke Hu

Department of Engineering Mechanics: Dissertations, Theses, and Student Research

Damage and failure in composite materials under dynamic loading has been extensively studied in experiments for several decades. Composite materials exhibit various damage and failure patterns under different loading rates, such as splitting and branching. Classical models cannot directly be applied to problems with discontinuous fields. A new nonlocal continuum model, peridynamics, has been proposed with the goal of solving dynamic fracture problems.

The J-integral has the physical significance of energy flow into the crack tip region. We present a rigorous derivation for the formulation of the J-integral in peridynamics using the crack infinitesimal virtual extension approach. We …

Towards Formalizing Non-Monotonic Reasoning In Physics: Logical Approach Based On Physical Induction And Its Relation To Kolmogorov Complexity, Vladik Kreinovich

Departmental Technical Reports (CS)

To formalize some types of non-monotonic reasoning in physics, researchers have proposed an approach based on Kolmogorov complexity. Inspired by Vladimir Lifschitz's belief that many features of reasoning can be described on a purely logical level, we show that an equivalent formalization can be described in purely logical terms: namely, in terms of physical induction.

One of the consequences of this formalization is that the set of not-abnormal states is (pre-)compact. We can therefore use Lifschitz's result that when there is only one state that satisfies a given equation (or system of equations), then we can algorithmically find this state. …

The Android Powwow Invitation Application, Jason Stewart

Computer Science and Software Engineering

No abstract provided.

Phase Ii Development Of A Non-Proprietary, Four-Cable, High Tension Median Barrier, Jennifer D. Schmidt, Dean L. Sicking, Ronald K. Faller, Karla A. Lechtenberg, Robert W. Bielenberg, Scott K. Rosenbaugh, John D. Reid

Nebraska Department of Transportation: Research Reports

No abstract provided.

A Three-Dimensional Inverse Finite Element Analysis Of The Heel Pad, Snehal Chokhandre, Jason P. Halloran, Antonie J. Van Den Bogert, Ahmet Erdemir

Mechanical Engineering Faculty Publications

Quantification of plantar tissue behavior of the heel pad is essential in developing computational models for predictive analysis of preventive treatment options such as footwear for patients with diabetes. Simulation based studies in the past have generally adopted heel pad properties from the literature, in return using heel-specific geometry with material properties of a different heel. In exceptional cases, patient-specific material characterization was performed with simplified two-dimensional models, without further evaluation of a heel-specific response under different loading conditions. The aim of this study was to conduct an inverse finite element analysis of the heel in order to calculate heel-specific …

System For Detection Of Malicious Wireless Device Patterns, Shikhar P. Acharya, R. Arora, Ivan G. Guardiola

Engineering Management and Systems Engineering Faculty Research & Creative Works

The research within presents the use of Hidden Markov Models (HMM) for the detection of wireless devices in highly noisy environments using their unintended electromagnetic emissions (UEE). All electromagnetic devices emit such radiation that is unique to the electronics, housing, and other device attributes. This pattern recognition system can provide continuous detection analysis and can provide ideal information regarding the distance to an unknown device. An experiment was performed where UEE of a device was detected by a spectrum analyzer. Experimental result shows that our model can accurately detect if there is a device nearby emitting UEE or not.

Nonlinear Dynamic Model-Based Adaptive Control Of A Solenoid-Valve System, Dongbin Lee, C. Nataraj, P. Naseradinmousavi

All Faculty Articles - School of Engineering and Computer Science

In this paper, a nonlinear model-based adaptive control approach is proposed for a solenoid-valve system. The challenge is that solenoids and butterfly valves have uncertainties in multiple parameters in the nonlinear model; various kinds of physical appearance such as size and stroke, dynamic parameters including inertia, damping, and torque coefficients, and operational parameters especially, pipe diameters and flow velocities. These uncertainties are making the system not only difficult to adjust to the environment, but also further complicated to develop the appropriate control approach for meeting the system objectives. The main contribution of this research is the application of adaptive control …

Dynamics Of Surface-Coupled Microcantilevers In Force Modulation Atomic Force Microscopy - Magnetic Vs. Dither Piezo Excitation, Xin Xu, Marisol Koslowski, Arvind Raman

Birck and NCN Publications

Force modulation atomic force microscopy is widely used for mapping the nanoscale mechanical properties of heterogeneous or composite materials using low frequency excitation of a microcantilever scanning the surface. Here we show that the excitation mode - magnetic or dither piezo, has a major influence on the surface-coupled microcantilever dynamics. Not only is the observed material property contrast inverted between these excitation modes but also the frequency response of the surface-coupled cantilever in the magnetic mode is near-ideal with a clear resonance peak and little phase distortion thus enabling quantitative mapping of the local mechanical properties. (C) 2012 American Institute …

The Development Of High-Resolution Seafloor Mapping Techniques, Chris Roman, Gabrielle Inglis, J. Ian Vaughn, Clara Smart, Bertrand Douillard, Stefan Williams

Graduate School of Oceanography Faculty Publications

No abstract provided.

Kreative Outlets, Travis Crist, Steve Clark, Jason Peressini

Computer Engineering

With the widespread use of smart phones and the advancement of WiFi technologies, people now have the Internet at their fingertips at all times. Home automation and control has the possibility of becoming the next big technology that can utilize the abundant availability of the Internet. This paper documents the findings and results of a project aimed at developing the infrastructure needed for a home automation system that is accessible anywhere. We implemented a system that utilized a web enabled ethernet connection and RF wireless technology to control AC outlets and provide the user with feedback information about the status …

Bluemote!, Philip Kaye

Computer Engineering

In today’s society, our mobile phones are an extremely useful device when we are on the go and away from our homes; however, when we return home, our smart phone becomes just a communication tool again. Home automation is inevitable, and it will find its way into every house. The first person to commercialize it to the point where it is as easy to set-up and as affordable as a home router will end up breaking this slow trend. The key to this success is the smart phone; this should end up being the most expensive piece of hardware for …

A Streamlined Strategy For Biohydrogen Production With Halanaerobium Hydrogeniformans, An Alkaliphilic Bacterium, Matthew B. Begemann, Melanie R. Mormile, Oliver C. Sitton, Judy D. Wall, Dwayne A. Elias

Biological Sciences Faculty Research & Creative Works

Biofuels are anticipated to enable a shift from fossil fuels for renewable transportation and manufacturing fuels, with biohydrogen considered attractive since it could offer the largest reduction of global carbon budgets. Currently, lignocellulosic biohydrogen production remains inefficient with pretreatments that are heavily fossil fuel-dependent. However, bacteria using alkali-treated biomass could streamline biofuel production while reducing costs and fossil fuel needs. An alkaliphilic bacterium, Halanaerobium hydrogeniformans, is described that is capable of biohydrogen production at levels rivaling neutrophilic strains, but at pH 11 and hypersaline conditions. H. hydrogeniformans ferments a variety of 5-and 6-carbon sugars derived from hemicellulose and cellulose …

A Framework For Evaluating Traceability Benchmark Metrics, Yonghee Shin, Jane Huffman Hayes, Jane Cleland-Huang

Technical Reports

Many software traceability techniques have been developed in the past decade, but suffer from inaccuracy. To address this shortcoming, the software traceability research community seeks to employ benchmarking. Benchmarking will help the community agree on whether improvements to traceability techniques have addressed the challenges faced by the research community. A plethora of evaluation methods have been applied, with no consensus on what should be part of a community benchmark. The goals of this paper are: to identify recurring problems in evaluation of traceability techniques, to identify essential properties that evaluation methods should possess to overcome the identified problems, and to …

Design And Construction Of A Solar Operated Gate, Jacob Gardener

BioResource and Agricultural Engineering

This senior project discusses the design and construction of a solar operated gate. A solar panel is used to charge a battery, and then an inverter is used to run a garage door opener off the battery. The garage door opener operates a short lever arm which is connected to a longer lever arm which is connected to the gate. Each component and mounting mechanisms were designed and built to effectively provide the gate opening function. The finished product operates well, the gate opens in about 8 seconds after the button is pressed on the remote controller or wall mount …

Advantages Of Gan Based Light-Emitting Diodes With A P-Ingan Hole Reservoir Layer, Taiping Lu, Shuti Li, Chao Liu, Kang Zhang, Yiqin Xu, Jinhui Tong, Lejuan Wu, Hailong Wang, Xiaodong Yang, Yian Yin, Guowei Xiao, Yugang Zhou

Mechanical and Aerospace Engineering Faculty Research & Creative Works

A p-type InGaN hole reservoir layer (HRL) was designed and incorporated in GaN based light-emitting diodes (LEDs) to enhance hole injection efficiency and alleviate efficiency droop. The fabricated LEDs with p-type HRL exhibited higher light output power, smaller emission energy shift and broadening as compared to its counterpart. Based on electrical and optical characteristics analysis and numerical simulation, these improvements are mainly attributed to the alleviated band bending in the last couple of quantum well and electron blocking layer, and thus better hole injection efficiency. Meanwhile, the efficiency droop can be effectively mitigated when the p-InGaN HRL was used.

The Flow And Fracture Of Advanced Glasses - An Overview, Tanguy Rouxel, Richard K. Brow

Materials Science and Engineering Faculty Research & Creative Works

Editors' note on appropriate occasions, the International Journal of Applied Glass Science will engage the services of Guest Editors to help focus on topics of special interest to the international glass community. in this inaugural issue of this initiative, Professors Tanguy Rouxel and Richard Brow have accomplished just that in their overview of the subject "Flow and Fracture of Advanced Glasses." an introduction to this material and brief biographical sketch are given below. Our sincere thanks are extended to them for their help and cooperation throughout this undertaking, and especially the authors who contributed so much of their time, energy, …

Quantifying The Life Cycle Benefits Of Performance-Based Design In Sustainable Design, David Isaac Carmona

Master's Theses

ABSTRACT

Quantifying the Life Cycle Benefits of Performance-Based Design in Sustainable Design

David Carmona

For this thesis, a method is developed and tested for use with performance based design to quantify the sustainable and financial benefits of designing buildings to a structural performance level higher than Life-Safety. This paper starts to answer the question, “which would be a better investment: build structures to a performance level of Immediate Occupancy (IO) with the likelihood of less damage and downtime after an earthquake or continue to build to the building code’s implied minimum performance level of Life-Safety (LS)?”

An ASCE 7-05 designed …

Nonlinear Uav Flight Control Using Command Filtered Backstepping, Brian M. Borra

Master's Theses

The aim of this effort is to implement a nonlinear flight control architecture, specifically flight path control via command filtered backstepping, for use in AME UAS's Fury® 1500 unmanned flying wing aircraft. Backstepping is a recursive, control-effort minimizing, constructive design procedure that interlaces the choice of a Lyapunov function with the design of feedback control. It allows the use of certain plant states to act as intermediate, virtual controls, for others breaking complex high order systems into a sequence of simpler lower-order design tasks.

Work herein is a simplified implementation based on publications by Farrell, Sharma, and Polycarpou. Online approximation …

Design, Acnd Construction Of A Portable Artificial Insemination Chute, Chris Herrera

BioResource and Agricultural Engineering

This senior project report discusses the design, construction, and evaluation of a portable artificial insemination chute for the use of the Cal Poly Beef Department. The design was based on the suggested modifications from operators of several other chutes currently in use.

The main areas considered for the design were; Ergonomics, cattle safety, factors effecting maximum breeding conception rates, and Portability.

The breeding chute proved superior over traditional chutes in a variety of ways. Improvement occurred in the areas of consideration as follows, user operation was simplified, animal stress was decreased, and maximum breeding efficiency was obtained.

Developing And Implementing Strategies To Address “Freddie Freeroader”, David Q. Hunsucker, Mark S. Spellman, Mark Bell

Kentucky Transportation Center Research Report

Although the majority Kentucky’s citizens pay their fair share of motor vehicle registration taxes, there are indications that a number of citizens evade motor vehicle property and usage tax through a variety of means. Some individuals license their cars in states that have no, or very low, property taxes on motor vehicles; others abuse the use of temporary tags, or simply fail to renew the registration on their vehicles. As a result, Kentucky is losing income that would be used to repair the state’s roadways and fund local services such as schools, libraries, health departments, and police and fire services. …

Theory For Dynamic Longitudinal Dispersion In Fractures And Rivers With Poiseuille Flow, Lichun Wang, M. Bayani Cardenas, Wen Deng, Philip C. Bennett

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

We present a theory for dynamic longitudinal dispersion coefficient (D) for transport by Poiseuille flow, the foundation for models of many natural systems, such as in fractures or rivers. Our theory describes the mixing and spreading process from molecular diffusion, through anomalous transport, and until Taylor dispersion. D is a sixth order function of fracture aperture (b) or river width (W). The time (T) and length (L) scales that separate preasymptotic and asymptotic dispersive transport behavior are T = b²/(4D _m), where D_m is the molecular diffusion …

Assessing Aviation E-Marketplaces: A Mmulti-Criteria Approach., Emilio Esposito, Pietro Evangelista, Michele Mastroianni, Renato Passaro, Edward Sweeney, Claudia-Maria Wagner

Books/Book chapters

After a proliferation of logistics e-Marketplaces during the dot.com boom of 1998-2000, there has been a high rate of failure and survivals are developing much more slowly than expected. This is the case in the aviation industry where a large number of B2B e-Marketplaces emerged according to the focus of aviation companies’ strategies on electronic B2B in the late 1990s. However, the current use of e-Marketplaces in the industry is low and many of them have ceased trading. The traditional e-Marketplaces model has been characterised by poor quality portals and a lack of technical standards. Such an approach is unsustainable …

Rapid Battery Exchange For Electric Vehicles, Michael Cocchi, Adam Rizkalla

Computer Engineering

No abstract provided.