Engineering Commons^™

Comparison Of Examination Performance In Mathematics, Physics And Electricity Of First Year, Level 7 Student Cohorts In Electrical Engineering, Aidan O'Dwyer

Conference papers

This contribution reports on the highly statistically significant relationship (p < 0.001) established in student examination performance in the three central scientific subjects in a Level 7, Year 1 engineering programme at Dublin Institute of Technology. A range of data is taken over seven academic years (from 2005-12 inclusive). Recommendations for learning and teaching as a result of this analysis are proposed.

On The Best Bandstructure For Thermoelectric Performance: A Landauer Perspective, Changwook Jeong, Raseong Kim, Mark S. Lundstrom

Birck and NCN Publications

The question of what bandstructure produces the best thermoelectric device performance is revisited from a Landauer perspective. We find that a delta-function transport distribution function (TDF) results in operation at the Mahan-Sofo upper limit for the thermoelectric figure-of-merit, ZT. We show, however, the Mahan-Sofo upper limit itself depends on the bandwidth (BW) of the dispersion, and therefore, a finite BW dispersion produces a higher ZT when the lattice thermal conductivity is finite. Including a realistic model for scattering profoundly changes the results. Instead of a narrow band, we find that a broad BW is best. The prospects of increasing ZT …

Parametric Noise Squeezing And Parametric Resonance Of Microcantilevers In Air And Liquid Environments, Gyan Prakash, Arvind Raman, Jeff F. Rhoads, Ronald G. Reifenberger

Birck and NCN Publications

In this work, parametric noise squeezing and parametric resonance are realized through the use of an electronic feedback circuit to excite a microcantilever with a signal proportional to the product of the microcantilever's displacement and a harmonic signal. The cantilever's displacement is monitored using an optical lever technique. By adjusting the gain of an amplifier in the feedback circuit, regimes of parametric noise squeezing/amplification and the principal and secondary parametric resonances of fundamental and higher order eigenmodes can be easily accessed. The exceptionally symmetric amplitude response of the microcantilever in the narrow frequency bandwidth is traced to a nonlinear parametric …

High Reclaimed Asphalt Pavement In Hot Mix Asphalt, Alan Norton Jr

Theses and Dissertations

When old roads have to be replaced, the existing pavement, known as Reclaimed Asphalt Pavement (RAP) is ripped up, milled, and stockpiled and can be used in the creation of new mixes in order to save money and resources. New Jersey state specifications limit the percentage of RAP that can be used to 15% for surface courses and 25% for the intermediate and base courses; however, other states have implemented much higher RAP percentages. The limitations are placed because the interaction between the virgin and residual RAP binder is unknown, with respect to the amount of residual binder that is …

Acuta Enews June 2012 Vol. 41, No. 6

ACUTA Newsletters

In this issue...

1 Meeting Member Needs with Excellence

2 What's on Your Desk?

3 IPv6 Transition: The Time ls (Finally) Here

4 Board Report

5 Social Intelligence: Bringing the Human Touch to the Online Work place

5 Annual Dues Reminders Mail July 2

6 lnfo Links

7 Welcome New Members

7 Check lt Out

8-12 Annual Conference Photo Gallery

Design And Testing Of A Low Cost Prosthetic Foot, Shalan Ertis, John Kearns, Seija Maniskas

Mechanical Engineering

No abstract provided.

Cal Poly Xpress Project: Exploring Interactive Storytelling Through Digital Multimedia Platforms, Eugene Bistolas

Computer Engineering

No abstract provided.

Roborodentia Scoring System, Justin Kikuchi

Computer Engineering

Every year at Cal Poly there is a robotics competition called Roborodentia . Roborodentia is sponsored by various industry leaders to provide a valuable and fun learning experience for Cal Poly students and alumni. The competition is held during the Cal Poly open house and draws a large number of spectators. In order to provide the spectators with a fun experience, it is necessary to present them with a live scoreboard, with visual and auditory effects.

The objective of this senior project was to design and build a fully functional scoreboard and tournament bracket with real-time scoring and timer. The …

Wireless Sensor Network For Wine Fermentation, Kerry Scharfglass, Andrew Lehmer

Computer Engineering

This project implements an automated temperature monitoring system for wine fermentation which is affordable, easy to use, and scalable to typical small winery setups. To realize these requirements, we implemented the system as a wireless sensor network utilizing commercial off-the-shelf hardware. Temperature and system diagnostic information is communicated wirelessly in a peer-to-peer network topology such that all information flows toward an aggregating server. The server makes the temperature information available over the Internet via a web application and alerts the winemaker by email when the temperature has left acceptable bounds that the winemaker may configure. This project also involved materials …

Design And Simulation Of Interconnected H-Bridge Inverter, Samuel Muehleck

Computer Engineering

In this project, the research, design and simulation of an interconnected H-bridge single-phase inverter was explored. The inverter design was divided into three separate sections. First, a VHDL programmed CPLD was used to generate control signals for the transistors of the inverter circuit. Second, power electronics was used to create an inverter circuit to change a DC input to a 60 Hz AC output. Lastly, additional circuits were used to link the generated control signals to the MOSFET transistors of the inverter circuit. The operation of the three components was then validated with computer simulations. Results of computer simulation demonstrate …

Chef Sifty, Dereck Quock

Computer Engineering

In our society today, childhood obesity has become a more prevalent problem, which needs to be fixed. Children constantly eat and snack unhealthily and parents need to understand the importance of teaching children how food affects their body and well-being. Teaching this to children at an early age will help to instill a healthy lifestyle for the child. Chef Sifty is a cooking game developed for Sifteo cubes that aims to show children the importance of nutrition while having fun. Using Sifteo’s concept of Intelligent Play, the objective of this project is to show children some healthy food and snack …

Isus - An Autonomous Off-Road Balancing Robot - High Level Software And Components Implementation, Kent Williams

Computer Engineering

The ISUS Mobile Robot is a balancing off-road mobile robotic vehicle capable of driving while balancing on two wheels in rough and changing terrain. The robot can be operated over WI-FI via a computer.

A Web-Based Approach To Music Library Management, Jason Young

Computer Engineering

This application utilizes modern standards developing in web browsers to create a desktop-like application for managing a music library online. The server side application is written in a model-view-controller style using Python backed by a MySQL database. The client side JavaScript was designed around a modular concept interfacing several third-party frameworks and libraries. By taking advantage of developing browser features such as persistent local storage, this web application was designed to handle a large library of music.

Pier Portal, Andrew Belis, Andrew (Andy) Crafts, Jeremy Depangher, Aaron Hein, Michael Machado, Aaron Poulos

Computer Engineering

This project constitutes the design, build, and test of a camera system that runs on a track along the length of a pier piling at the Cal Poly pier in Avila Beach. The goal of the camera system is to observe the abundant sea life active on the surface of the piling underwater and in the tidal zone. The camera system will stream live video to the internet, record HD video, and be controllable remotely. The track is mounted to the piling with brackets and extends from the sea floor to a few feet above the pier deck. The camera, …

Beaglebone Webcam Server, Alexander Corcoran

Computer Engineering

The Beaglebone Webcam Server is a Linux based IP webcam, based on an inexpensive ARM development board, which hosts its own web server to display the webcam feed. The server has the ability to either connect to a wired router, or to act as a wireless access point in order for users to connect and control its functions via any Wi-Fi enabled device.

Robotic Fingerspelling Hand For Deaf-Blind Communication, Brian Fang, Colby Dixon, Trevor Wong

Mechanical Engineering

Robotic fingerspelling hand for the deaf-blind. The hand forms the shapes of the American Manual Alphabet with 11 servos. The project was sponsored by The Smith-Kettlewell Eye Reaserch Institute.

Mini Pump, Stephen Scruggs, Britta Berg-Johansen, Kyle Kriete

Mechanical Engineering

No abstract provided.

Non Interference For Intuitionist Necessity, Radha Jagadeesan, Corin Pitcher, James Riely

Technical Reports

The necessity modality of intuitionist S4 is a comonad. In this paper, we study indexed necessity modalities that provide the logical foundation for a variety of applications; for example, to model possession of capabilities in policy languages for access control, and to track exceptions in type theories for exceptional computation.

Noninterference properties of the intuitionist logic of indexed necessity modalities capture the limitations on the information flow between formulas that are under the scope of necessity modalities with different indices. The impact of noninterference is seen in the unprovability of certain formulas. Noninterference is necessary for several applications. In models …

Irrigation System Evaluation And Pump Efficiency, Gregory Borges

BioResource and Agricultural Engineering

This project encompasses the Evaluation of a drip irrigation system for a Pistachio orchard in Tulare, Ca. The project parameters were decided on by Borges Farms. After the evaluation suggestions are to be made for improving the system’s efficiency. These suggestions must be approved by the grower and show whether they are cost efficient. The irrigation system cannot be modified to fit the pump chosen.

Research for the project encompasses drip irrigation systems, irrigation pump efficiency, irrigation management, well reclamation techniques and pistachio water requirements. A Distribution Uniformity evaluation was performed to understand how sand has affected the system. I …

Design & Cost Analysis Of An Atv Freestyle Motocross Ramp, Thaddeus Pedro

BioResource and Agricultural Engineering

This project encompasses the final design of an improved ATV freestyle motocross ramp. The project parameters were decided on by Thaddeus Pedro. This evaluation includes an analysis of the final improved design. This report does not include any construction procedures of any kind.

Research for the project encompasses the cultural history of the freestyle motocross sport and variations of the freestyle motocross ramp. Further research includes the analysis of an existing ramp used as a basis for improvement for the new ramp. The theoretical results indicate a significant improvement in structural weight reduction and reduced material cost.

Design, Construction, And Evaluation Of An Automated Chicken Coop Door, Kyle Inks

BioResource and Agricultural Engineering

This senior project takes a look into the design, construction, and evaluation of an automated chicken coop door. The idea and need for such a door came from my mother Jan Inks. The parameters for the project include, low production cost, easy installation on existing coops, sleek design, automatically open at a set time in the morning, and automatically close at a set time in the evening.

Temporary Flood Barriers, Sarah M. Mccormack, Chris Vandyke, Ashley Suazo, Doug Kreis

Kentucky Transportation Center Research Report

This report investigates the use and effectiveness of temporary flood barriers (TFBs) to mitigate the impacts of flood waters on Kentucky’s roadways. TFBs are structures, usually filled with sand, which are constructed along the edges of roadways and thus serve as a buffer against rising waters. In doing so, they can protect the structural soundness of roads, and ensure that roads remain open to traffic during flood events. The report is divided into four main sections. The first chapter introduces the concept of TFBs and notes situations in which they have been effectively deployed. The second chapter surveys the different …

Scalable Synthesis Of Palladium Nanoparticle Catalysts By Atomic Layer Deposition, Xinhua Liang, Lauren B. Lyon, Ying Bing Jiang, Alan W. Weimer

Chemical and Biochemical Engineering Faculty Research & Creative Works

Atomic layer deposition (ALD) was used to produce Pd/Al2O 3 catalysts using sequential exposures of Pd (II) hexafluoro acetylacetonate and formalin at 200 °C in a fluidized bed reactor. the ALD-prepared Pd/alumina catalysts were characterized by various methods including hydrogen chemisorption, XPS, and TEM, and compared with a commercially available 1 wt.% Pd/alumina catalyst, which was also characterized. the content of Pd on alumina support and the size of Pd nanoparticles can be controlled by the number of ALD-coating cycles and the dose time of the Pd precursor. One layer of organic component from the Pd precursor remained on the …

Viscoelastic Anisotropic Finite Element Mixture Model Of Articular Cartilage Using Viscoelastic Collagen Fibers And Validation With Stress Relaxation Data, Matthew Alexander Griebel

Master's Theses

Experimental results show that collagen fibers exhibit stress relaxation under tension and a highly anisotropic distribution. To further develop the earlier model of Stender [1], the collagen constituent was updated to reflect its intrinsic viscoelasticity and anisotropic distribution, and integrated with an existing mixture model with glycosaminoglycans and ground substance matrix. A two-term Prony series expansion of the quasi-linear viscoelastic model was chosen to model the viscoelastic properties of the collagen fibers. Material parameters were determined by using the simplex method to minimize the sum of squared errors between model results and experimental stress relaxation data of tissue in tension. …

The Micro Check-In Framework For The Next Generation Of Location-Based Applications, Shraddha Kacha

Master's Theses

Today's mobile computing platforms provide new, convenient possibilities for location-based commercial activity. In particular, the global positioning system (GPS) provides location data for local advertising and retail activity. In this thesis, we take the next step and introduce the concept of micro check-in. Micro check-in is a simple framework that allows users to match their current location to specific objects or places at a resolution much finer than that allowed by GPS based check-in. We show that micro check-in enables customers to reveal their location at a fine level of granularity. By describing the concepts of points of service, service …

Comparing Anti-Vegf Antibodies And Aptamers On Paper Microfluidic-Based Platforms, Katherine Noel Clayton

Master's Theses

The field of microfluidics is expanding into what is known as paper microfluidics. This uses a paper platform rather than materials (i.e. PDMS, PMMA) that are commonly used in microfluidics research. Current devices require an expensive manufacturing process and external sources to power the device. Such devices are not practical in low resource environments. As a consequence, it is the goal of this Thesis to develop a three-dimensional, multiplexed assay chip using nitrocellulose membranes. This device comprises of multiple layers of nitrocellulose membranes with defined fluidic channels. The multiple layers are bound together using double backed tape, and imbedded between …

Touchspice: Physical-Virtual Circuit Emulator, Kevin Christopher Peters

Master's Theses

This thesis involves the creation of a system of embedded touchscreen devices called touchSPICE to aid in the learning of basic circuits. Traditionally, circuit theory is taught to students in two different methods, lectures and laboratory exercises. Lectures focus on auditory and visual learning and are largely passive learning. Lab experiments allow students to physically interact with the circuits, and learn visually through viewing output waveforms from simulators or on measurement devices. The goal of the touchSPICE project is to develop a physical system for virtual, real-time SPICE simulation that mimics the laboratory experience. In touchSPICE, touchscreen devices act as …

Design Of Experimentation To Systematically Determine The Interaction Between Electrospinning Variables And To Optimize The Fiber Diameter Of Electrospun Poly (D, L-Lactide-Co-Glycolide) Scaffolds For Tissue Engineered Constructs, Yvette S. Castillo

Master's Theses

Cardiac disease causes approximately a third of the deaths in the United States. Furthermore, most of these deaths are due to a condition termed atherosclerosis, which is a buildup of plaque in the coronary arteries, leading to occlusion of normal blood flow to the cardiac muscle. Among the methods to treat the condition, stents are devices that are used to restore normal blood flow in the atherosclerotic arteries. Before advancement can be made to these devices and changes can be tested in live models, a reliable testing method that mimics the environment of the native blood vessel is needed. Dr. …

Study Of Statistical And Computational Intelligence Methods Of Detecting Temporal Signature Of Forest Fire Heat Plume From Single-Band Ground-Based Infrared Video, Daniel G. Kohler

Master's Theses

This thesis will analyze video from land-based, cooled mid-wave infrared cameras to identify temporal features indicative of a heat plume from a forest fire. Desirable features and methods will show an ability to distinguish between heat plume movement and other movements, such as foliage, vehicles, humans, and birds in flight. Features will be constructed primarily using combinations of statistics and principal component analysis (PCA) with intent to detect key characteristics of fire and heat plume: persistence and growth. Several classification systems will combine and filter the features in an attempt to classify pixels as either heat or non-heat. The classification …

Characterization Of Raw Milk Fouling On Plate-Type Heat Exchangers Using Different Alloys And Cow Phenotypes, Stephen Ernest Nelson

Master's Theses

ABSTRACT

Characterization Of Raw Milk Fouling On Plate-Type Heat Exchangers Using Different Alloys And Cow PhenotypeS

Stephen Ernest Nelson

Milk and other dairy products are widely used in many households today. Milk is a popular beverage that is seen as a healthy alternative to other synthetic beverages such as soda pop and other sugar based drinks. It became law that milk, and milk products are pasteurized before its release to the general public (FDA 2003). Pasteurization is a thermal process where the intent is to lower the concentration of microorganisms in the milk to render it safe to drink with …