Engineering Commons^™

Product Display Versus Graphical Representation On Packaging, Joshua Galvarino

All Theses

ABSTRACT
Previous research conducted (Hurley, et al., 2012) concerning physical and graphical product visibility from the primary display panel (PDP) is limited to one product category. This research expands previous peer-reviewed research, which indicates that there is a significant difference between consumer preferences of graphical display vs. physical product display on packaging.
The shelf presence of packages showing actual product visibility versus packages showing only a graphical representation of the product was evaluated. Both shopping results and quantitative data using eye-tracking technology were collected and cross-referenced with a qualitative, post-experiment survey.
Specifically, variables of packaging within pasta, snacks, prepared frozen …

3d Reconstruction For Post-Disaster Analysis Of Civil Infrastructure, Joshua Caron

All Theses

Following a natural disaster, there is a need to rapidly assess the safety of civil infrastructure. This job is typically undertaken by local governments with the help of volunteer civil engineers with structural expertise, as well as organizations such as Cal EMA and ASCE. However, the inspection process is labor-intensive and a bit tedious, and results are prone to error as they tend to rely on the individual expertise of the inspectors. 3D reconstruction stands to become a useful tool in the safety evaluation process, as well as providing valuable opportunities for forensic engineering. This research explores the application of …

Modeling System Of Systems Acquisition, Nil Kilicay-Ergin, Paulette Acheson, John Colombi, Cihan H. Dagli

Engineering Management and Systems Engineering Faculty Research & Creative Works

System of systems (SoS) acquisition is a dynamic process of integrating independent systems. This paper describes modeling of the SoS acquisition environment based on the Wave Process Model. Agent-Based modeling methodology is utilized to abstract behavioral aspects of the acquisition process. © 2012 IEEE.

Electromagnetic Emissions From The Ic Packaging, Nick K.H. Huang, Li (Lijun) Jun Jiang, Huichun Yu, Gang Li, Shuai Xu, Tao Wang, Huasheng Ren

Electrical and Computer Engineering Faculty Research & Creative Works

The EMC and EMI of the IC packaging are becoming increasingly important to modern electronics. Its EMC, SI, and PI have been broadly attested. But electromagnetic radiations from IC packaging and the corresponding EMI were seldom studied. In this paper, the fundamental principles and properties of the electromagnetic radiations caused by vias and traces in IC packagings are carefully investigated. Various radiation mechanisms are analyzed for different representative scenarios. Numerical simulations are employed to support the analyzing results. © 2012 IEEE.

Fundamental Components Of The Ic Packaging Electromagnetic Interference (Emi) Analysis, Nick K.H. Huang, Li (Lijun) Jun Jiang, Huichun Yu, Gang Li, Shuai Xu, Huasheng Ren

Electrical and Computer Engineering Faculty Research & Creative Works

The IC packaging EMC/SI/PI problems have been broadly attested. But IC packaging EMI was seldom addressed. Because the EMI emission by IC packagings is increasingly significant, in this paper, EMI behaviors are systematically studied. To fundamentally understand the radiation mechanism, radiated contributions from ground lids, vias, and traces of the packaging are investigated and modeled separately. It is seen that the packaging EMI has clearly low frequency and high frequency behaviors. The low frequency behavior is due to the Hertzian dipole effects of vias. The high frequency behavior is due to the radiation of excited cavity modes. Both theoretical analysis …

A Low Complexity Algorithm For Linear Precoder Design With Finite Alphabet Inputs, Mingxi Wang, Yahong Rosa Zheng, Chengshan Xiao, Weiliang Zeng

Electrical and Computer Engineering Faculty Research & Creative Works

A low complexity precoding method is proposed for practical multiple-input multiple-output (MIMO) systems. based on the two-step optimal precoder design algorithm that maximizes the lower bound of the mutual information with finite-alphabet inputs, the proposed method simplifies the precoder design by fixing the right singular vectors of the precoder matrix to be the modulation diversity matrix, eliminating the iterative optimization between the two steps, and discretizing the search space of the power allocation vector. the modulation diversity matrices are designed for different modulations, which outperform the existing maximum diversity for BPSK and 8PSK inputs. for a 4x4 channel, the computational …

Linear Precoding Of Finite Alphabet Signals In Multi-Antenna Broadcast Channels, Yongpeng Wu, Mingxi Wang, Chengshan Xiao, Zhi Ding, Xiqi Gao

Electrical and Computer Engineering Faculty Research & Creative Works

We investigate the design of linear transmit precoding for multiple-input multiple-output (MIMO) broadcast channels (BC) with finite alphabet input signals. We derive an explicit expression for the achievable rate region of the MIMO BC with discrete constellation inputs, which is generally applicable to cases involving arbitrary user number and arbitrary antenna configurations. for the case where all the users employ the same modulation scheme, we further present a weighted sum rate upper-bound of the MIMO BC with identical transmit precoding matrices. the resulting bound demonstrates a serious performance loss due to multi-user interference for MIMO BC with finite alphabet inputs …

On The Diversity Gain Region Of The Z-Interference Channels, Mohamed S. Nafea, Karim G. Seddik, Mohammed Nafie, Hesham El Gamal

Electrical and Computer Engineering Faculty Research & Creative Works

In this work, we analyze the diversity gain region (DGR) of the single-antenna Rayleigh fading Z-Interference channel (ZIC). More specifically, we characterize the achievable DGR of the fixed-power split Han-Kobayashi (HK) approach under these assumptions. Our characterization comes in a closed form and demonstrates that the HK scheme with only a common message is a singular case, which achieves the best DGR among all HK schemes for certain multiplexing gains. Finally, we show that generalized time sharing, with variable rate and power assignments for the common and private messages, does not improve the achievable DGR. © 2012 IEEE.

Fabrication Of Cao-Nao-Sio2/Tio2 Scaffolds For Surgical Applications, A. W. Wren, A. Coughlan, K. E. Smale, S. T. Misture, B. P. Mahon, O. M. Clarkin, Mark R. Towler

Chemical and Biochemical Engineering Faculty Research & Creative Works

A series of titanium (Ti) based glasses were formulated (0.62 SiO₂-0.14 Na₂O-0.24 CaO, with 0.05 mol% TiO₂ substitutions for SiO₂) to develop glass/ceramic scaffolds for bone augmentation. Glasses were initially characterised using X-ray diffraction (XRD) and particle size analysis, where the starting materials were amorphous with 4.5 μm particles. Hot stage microscopy and high temperature XRD were used to determine the sintering temperature (̃700 °C) and any crystalline phases present in this region (Na₂Ca₃Si₆O₁₆, combeite and quartz). Hardness testing revealed that the Ti-free control (ScC- …

Investigation Of The Physical And Molecular Properties Of Asphalt Binders Processed With Used Motor Oils, Mohyeldin Ragab, Magdy Abdelrahman

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

In this work we investigated the performance aspects of addition of used motor oils (UMO) to neat and crumb rubber modified asphalts (CRMA) and related that to the change of molecular size distribution of modified asphalt’s fractions; asphaltenes, saturates, naphthene aromatics, and polar aromatics. Based on the results of temperature sweep viscoelastic tests, addition of crumb rubber modifier (CRM) alone or with UMO results in the formation of internal network within the modified asphalt. Based on the results of short and long term aged asphalts, the utilization of combination of UMO and CRM enhanced the aging behavior of asphalt. Bending …

Dual Pn Padding Tds-Ofdm For Underwater Acoustic Communication, Jinxing Hao, Yahong Rosa Zheng, Jintao Wang, Jian Song

Electrical and Computer Engineering Faculty Research & Creative Works

A time domain synchronous orthogonal frequency division multiplexing (TDS-OFDM) scheme with dual Pseudo noise (PN) sequence is proposed for underwater acoustic (UWA) communication. Instead of using cyclic prefix (CP) or zero padding (ZP) as the guard interval, the proposed TDS-OFDM scheme uses two identical PN sequences as guard interval and utilizes them for frame synchronization and channel estimation. the proposed TDS-OFDM increases the spectrum efficiency over the conventional CP or ZP OFDM systems where additional pilots have to be inserted for channel estimation. with the dual PN at each frame header, compressed sensing channel estimation is adopted, and a rather …

Efficiency Optimization Of A Sensorless V/F Control Method For Pmsm, Seyed Hesam Jafari, Keith Corzine, Jing Huang

Electrical and Computer Engineering Faculty Research & Creative Works

This paper presents a V/f control for permanent magnet synchronous machines which focuses on optimization by minimizing the d-axis current in order to reduce the motor losses and supplied input power. the proposed sensor less method only needs machine terminal signals and does not require any additional motor parameter measurements. Minimization of the d-axis current is accomplished through computed reactive power. © 2012 IEEE.

On Linear Precoding Of Non-Regenerative Mimo Relays For Qam Inputs, Xiao Liang, Zhi Ding, Chengshan Xiao

Electrical and Computer Engineering Faculty Research & Creative Works

Recent works have established that MIMO systems optimized for Gaussian source signals may suffer unexpected performance loss when practical inputs are in fact discrete QAM sources. There is a practical need in the optimization of MIMO related systems of various networking scenarios to specifically target source signals of finite QAM alphabet. in this work, we investigate the precoding optimization of wireless two-hop non-regenerative three-node MIMO relay networks driven by finite-alphabet inputs. Exploiting a known optimal structure for the precoder at relay and a special convexity property, we propose an iterative two-step numerical optimization algorithm. This algorithm is a general solution, …

Single-Carrier Frequency-Domain Turbo Equalization Without Cyclic Prefix Or Zero Padding For Underwater Acoustic Communications, Longbao Wang, Jun Tao, Yahong Rosa Zheng

Electrical and Computer Engineering Faculty Research & Creative Works

A frequency-domain turbo equalization (FDTE) scheme without cyclic prefix (CP) or zero padding is proposed for single-carrier, multiple-input-multiple- output underwater acoustic communication. in the first iteration of the FDTE, the received continuous data stream is divided into consecutive blocks and a combined inter-block-interference (IBI) cancellation and overlapped windowing scheme is used to diagonalize each data block for low-complexity detection in the frequency domain. Since the second iteration, IBI cancellation and CP reconstruction are applied on each block to enable effective symbol detection. This work extends the authors previous work on frequency-domain hard-decision equalization to soft-decision turbo equalization so that it …

Early Forest Fire Detection Using Texture, Blob Threshold, And Motion Analysis Of Principal Components, Georges Fouad Moussa

Master's Theses

Forest fires constantly threaten ecological systems, infrastructure and human lives. The purpose behind this study is minimizing the devastating damage caused by forest fires. Since it is impossible to completely avoid their occurrences, it is essential to accomplish a fast and appropriate intervention to minimize their destructive consequences. The most traditional method for detecting forest fires is human based surveillance through lookout towers. However, this study presents a more modern technique. It utilizes land-based real-time multispectral video processing to identify and determine the possibility of fire occurring within the camera’s field of view. The temporal, spectral, and spatial signatures of …

Smart Wall Plug Design For The Dc House Project, Edward Constant Sibal

Master's Theses

The DC House project at Cal Poly State University faces a challenge of supplying DC voltage to household appliances. Each appliance in the DC House constitutes a DC load that has a unique voltage and power rating, hence the need to develop a smart DC wall plug that will automatically adjust to the operating voltage required by any DC load. This thesis entails a proof of concept design of the smart DC wall plug which can automatically detect an appliance’s voltage rating. The design employs a dc-dc converter in conjunction with a microcontroller to sense load current to properly adjust …

Laboratory Investigation Of The Effects Of Temperature And Moisture On Interface Shear Strength Of Textured Geomembrane And Geosynthetic Clay Liner, Taki Stavros Chrysovergis

Master's Theses

A laboratory investigation was conducted to determine the effects of temperature and moisture on the shear strength of textured geomembrane (T-GM) and geosynthetic clay liner (GCL) interface. Several landfill slope failures involving geosynthetics have occurred within the past three decades. Interface shear strength of T-GM/GCL is well documented for testing conducted at laboratory temperatures and at moisture contents associated with GCLs in submerged conditions. However, in-service conditions for landfill liner systems include a wide range of temperatures (extending from below 0 °C to above 40 °C) and a wide range of moisture conditions. Large-scale interface direct shear tests were performed …

The Application Of Systems Engineering Principles To Model Lithium Ion Battery Voltage, George Gibbs

Master's Theses

The objective of this project is to present a Lithium Ion battery voltage model derived using systems engineering principles. This paper will describe the details of the model and the implementation of the model in practical use in a power system. Additionally, the model code is described and results of the model output are compared to battery cell test data. Finally, recommendations for increased model fidelity and capability are summarized.

The modeling theory has been previously documented in the literature but detailed implementation and application of the modeling theory is shown. The detailed battery cell test voltage profiles are proprietary; …

Measuring Impedance Of Tissues Using A Microfabricated Microelectrode Array, Ashwini Bhat

Master's Theses

MEASURING IMPEDANCE OF TISSUES USING A MICROFABRICATED MICROELECTRODE ARRAY By Ashwini Bhat

This thesis looks at the possibility of using impedance spectroscopy for differentiating tissue, using a microelectrode array (MEA). The thesis first discusses the background and the motivation for this thesis. It covers the certain basic concepts of the human skin starting from the top epidermis layer all the way to the deep dermis layers of the skin. Then it discusses different types of skin cancer and how they occur, in humans. It also discusses various microfabrication techniques such as oxidation, wet etching, sputtering and photolithography for the creation …

Energy Trapping Of Thickness-Shear And Thickness-Twist Modes In A Partially Electroded At-Cut Quartz Resonator, Huijing He, Guoquan Nie, Jinxi Liu, Jiashi Yang

Department of Mechanical and Materials Engineering: Faculty Publications

The thickness-shear and thickness-twist vibrations of a finite and partially electroded AT-cut quartz resonator are investigated. The equations of anisotropic elasticity are used with the omission of the small elastic constant c56 . An analytical solution is obtained using Fourier series from which the free vibration resonant frequencies, mode shapes, and energy trapping are calculated and examined.

Environmental And Biological Applications And Implications Of Soft And Condensed Nanomaterials, Pengyu Chen

All Dissertations

Recent innovations and growth of nanotechnology have spurred exciting technological and commercial developments of nanomaterails. Their appealing physical and physicochemical properties offer great opportunities in biological and environmental applications, while in the meantime may compromise human health and environmental sustainability through either unintentional exposure or intentional discharge.
Accordingly, this dissertation exploits the physicochemical behavior of soft dendritic polymers for environmental remediation and condensed nano ZnO tetrapods for biological sensing (Chapter two-four), and further delineate the environmental implications of such nanomaterials using algae- the major constituent of the aquatic food chain-as a model system (Chapter five).
This dissertation is presented as …

Managing Elective And Non-Elective Case Assignments For An Operating Room Suite, Narges Hosseini

All Dissertations

The success of operating room management depends on all levels of decision making, from strategic to tactical and operational decisions. One key decision in systems with block booking is to assign sufficient amount of block time to surgeons and surgery groups. While the typical method of block assignment identifies the share of surgery groups from OR times based on average of past usage, this method does not count for the difference between cost of under and overtime. One of the goals of this research is to develop a decision framework for block assignment. This work is presented in chapter two. …

Effect Of Scc Mixture Composition On Thixotropy And Formwork Pressure, A. F. Omran, Kamal H. Khayat, Y. M. Elaguab

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

High lateral pressure exerted on formwork systems by self-consolidating concrete (SCC) is one of the hindrances for using such highly flowable concrete in cast-in-place applications. Self-consolidating concrete is a complex system that can be made using a wide range of mixture proportioning and often incorporated various chemical admixtures and supplementary cementitious materials. the investigation of the effect of each material ingredient independently on lateral pressure of SCC is not a simple task. in this study, thixotropy is rather used to assess the effect of various mixture parameters on formwork pressure. Thixotropy is determined by the evaluation of the structural buildup …

The Unstructured Grid Incompressible Navier-Stokes Algorithm For Convective Heat Transfer Based On Artificial Compressibility, Jessica Elaine Kress

Masters Theses and Doctoral Dissertations

The development of an explicit unstructured grid finite-volume scheme for solving the full incompressible Navier-Stokes equations along with the energy equation in a strongly coupled manner is presented. The Boussinesq approximation is utilized to account for thermal buoyancy. The method of artificial compressibilty is used to solve the resulting equations in a time marching fashion. Roe's approximate Riemann solver is used for the construction of the numerical flux. An eigensystem is derived for the flux Jacobian matrix, which is used in the evaluation of the numerical flux and the characteristic variable boundary conditions. The resulting algorithm is validated by simulating …

Quantifying The Effect Of Nanoparticles On As(V) Ecotoxicity Exemplified By Nano-Fe2o3 (Magnetic) And Nano-Al2o3, Ji Hu, Demin Wang, Brett E. Forthaus, Jianmin Wang

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Nano-Fe₂O₃ (magnetic) and nano-Al₂O₃ are increasingly used in biomedical fields for cellular labeling and drug delivery, and in the industry as catalysts. However, they may also serve as carriers of toxic contaminants and negatively impact the environment and human health. in the present study, Ceriodaphnia dubia was used to assess the toxicity of these nanoparticles (NPs) with and without the presence of background arsenic(V) (As[V]). the results showed that although these NPs alone did not exhibit significant toxicity in the experimental concentration range, they could significantly enhance the toxicity of As(V). the accumulation of …

Avataraudiometer: An Online Simulation Platform For Pure-Tone Audiometry, Daniel Weidman, Lauren Calandruccio

Intersections Fall 2020

Simulation education for medical and health professional training bridges classroom learning and training in a clinical environment. Its use has been increasing over the past two decades. Guidance to avoid in-person contact due to SARS-CoV-2 has further increased demand. Pure-tone audiometry is part of an audiometric test battery used to evaluate the auditory system. At Case Western Reserve University, students typically learn to conduct audiometry in COSI 370: Introduction to Audiology. Under current pandemic circumstances, students are unable to gain in-person experience using standard hardware (an audiometer and calibrated headphones). AvatarAudiometer solves this problem via an interactive online tool that …

Engineering Titanium Dioxide Nanoparticles For Bacterial Biofilm Treatment, Massado Ngompe, Yu Hsin Tsai, Nathalie Milbrandt, Zhuoying Jiang, Xiong Yu, Anna Cristina S. Samia

Intersections Fall 2020

Titanium dioxide nanoparticles (TiO2 NPs) are non-toxic and biocompatible materials that are used for a wide range of applications such as pigments, sunscreens, cosmetics, and food colorings. TiO2 possesses a large band gap (3.2 eV) which, by heteroatom doping or by molten salt/hydrogen assisted reduction, can be narrowed to allow for activity within the visible light spectrum making them optimal candidates for use in bacterial biofilm eradication. Nitrogen-doped and reduced TiO2 NPs have been explored in this study due to their narrowed band gap. The narrowed band gap allows for the formation of excitons upon the absorption of light within …

Seepage And Stability Of A Dam In An Artesian Setting, Sean A. Parks

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

Willow Creek Dam is located in a unique region on the boundary of a confined aquifer, where artesian conditions exist. Recently, groundwater levels have exceeded the elevation of the downstream berm well above anticipated piezometric elevations. It was presumed from limited evidence that these high piezometric levels resulted from pressure in the aquifer rather than from seepage out of the reservoir. The purpose of this investigation was to determine the relative contributions of the reservoir and the regional groundwater to observed piezometric levels and how these levels affect seepage exit gradients and slope stability of the dam.

Comparing the head …

Modeling Of Yeast Pheromone Pathway Using Petri Nets, Abhishek Majumdar

School of Computing: Dissertations, Theses, and Student Research

Yeast (Saccharomyces cerevisiae) is one of the most widely studied single celled organisms. Mating of yeast cells occur between cells of opposite mating types a and alpha. Pheromone secretion by a cell alerts the corresponding opposite type cell about its presence and eventually facilitates the process of mating between them. The details of how pheromones affect cells can be studied from the pheromone response pathway in a yeast cell. A response pathway typically depicts the chain of interactions that happens between the different proteins in the cells in response to the pheromone. In this thesis we model the …

Sustainability For Die Manufacturing: Comparative Study Of Wedm And Milling, Matthew S. Kalus

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

Sustainability is more important in today's culture due to the increasing demand for a more eco-friendly society. Concentrations in minimizing and reducing environmental impacts, energy and natural resources have been forthcoming in industry. The tool, mold and die industries are the most well known industries that machine harder materials using mills and WEDM. The objective of this thesis was to compare the sustainability differences in both of these machines utilizing the accepted standards for evaluating the manufacturing process performance for sustainability. These standards include the evaluation of the process parameters, raw materials, power, tools and fluids which all contribute to …