Engineering Commons^™

Multiple Fundamental Frequency Pitch Detection For Real Time Midi Applications, Nathan Hilbish

Theses and Dissertations

This study aimed to develop a real time multiple fundamental frequency detection algorithm for real time pitch to MIDI conversion applications. The algorithm described here uses neural network classifiers to make classifications in order to define a chord pattern (combination of multiple fundamental frequencies). The first classification uses a binary decision tree that determines the root note (first note) in a combination of notes; this is achieved through a neural network binary classifier. For each leaf of the binary tree, each classifier determines the frequency group of the root note (low or high frequency) until only two frequencies are left …

University Place - Moving Day: Su's Major Computer Programs Are Getting A New Home, Renee Gearhart Levy, George Lowery, Mary Ellen Mengucci, Dana L. Cooke

Syracuse University Magazine

No abstract provided.

Modeling Potential Hydrochemical Responses To Climate Change And Increasing Co2 At The Hubbard Brook Experimental Forest Using A Dynamic Biogeochemical Model (Pnet-Bgc), Afshin Pourmokhtaria, Charles T. Driscoll, John L. Campbell, Katharine Hayhoe

Civil and Environmental Engineering - All Scholarship

Dynamic hydrochemical models are useful tools for understanding and predicting the interactive effects of climate change, atmospheric CO2, and atmospheric deposition on the hydrology and water quality of forested watersheds. We used the biogeochemical model, PnET-BGC, to evaluate the effects of potential future changes in temperature, precipitation, solar radiation, and atmospheric CO2 on pools, concentrations, and fluxes of major elements at the Hubbard Brook Experimental Forest in New Hampshire, United States. Future climate projections used to run PnET-BGC were generated specifically for the Hubbard Brook Experimental Forest with a statistical technique that downscales climate output (e.g., air temperature, precipitation, solar …

Lock And Hold Structured Light Illumination, Laurence G. Hassebrook, Daniel L. Lau, Charles J. Casey

Electrical and Computer Engineering Faculty Patents

A method, system, and associated program code, for 3-dimensional image acquisition, using structured light illumination, of a surface-of-interest under observation by at least one camera. One aspect includes: illuminating the surface-of-interest, while static/at rest, with structured light to obtain initial depth map data therefor; while projecting a hold pattern comprised of a plurality of snake-stripes at the static surface-of-interest, assigning an identity to and an initial lock position of each of the snake-stripes of the hold pattern; and while projecting the hold pattern, tracking, from frame-to-frame each of the snake-stripes. Another aspect includes: projecting a hold pattern comprised of a …

System And Method For 3d Imaging Using Structured Light Illumination, Laurence G. Hassebrook, Daniel L. Lau, Henry G. Dietz

Electrical and Computer Engineering Faculty Patents

A biometrics system captures and processes a handprint image using a structured light illumination to create a 2D representation equivalent of a rolled inked handprint. The biometrics system includes an enclosure with a scan volume for placement of the hand. A reference plane with a backdrop pattern forms one side of the scan volume. The backdrop pattern is preferably a random noise pattern and the coordinates of the backdrop pattern are predetermined at system provisioning. The biometrics system further includes at least one projection unit for projecting a structured light pattern onto a hand positioned in the scan volume on …

Smart Grid: A New Hope For Energetic Crisis, Humberto Camarena

COURI Symposium Abstracts, Summer 2012

With the world changing so rapidly, new renewable energies began to develop, but a new system that integrated these energies and the Non-renewable energies has not been developed yet. A great problem grew at the same time as the renewable energies became more popular. It consisted on searching for a way to permit the control of flow of energy and the power thru the power grid. It’s a critical problem because all the energy that is lost is during the power factor phenomenon. The main factor that produces that the power factor be low (the lowest, more energy is lost) …

A Comparative Study Of Three Sorting Techniques In Performing Cognitive Tasks On A Tabular Representation, Inkyoung Hur, Sung-Hee Kim, Anya Samak, Ji Soo Yi

Hive Lab Publications Archive

We investigated the impacts of three sorting techniques on various cognitive tasks performed on a tabular representation. The tasks under study were a multi-attribute object selection task and selected low-level analytic tasks. Three sorting techniques, including sorting by a column (Typical Sort: TS), sorting by all columns simultaneously (SimulSort: SS), and sorting by all columns with faithful vertical locations (ParallelTable: PT), were compared with a static table without the sorting feature (Baseline: B). An incentivized controlled laboratory study with 80 participants and a preliminary eye-tracker study were conducted to better understand the strengths and weaknesses of the four different approaches. …

Sensitivity Studies Of A Low Temperature Low Approach Direct Cooling Tower For Building Radiant Cooling Systems, Medhi Nasrabadi, Donal Finn, Ben Costelloe

Conference Papers

Recent interest in cooling towers as a mechanism for producing chilled water, together with the evolution of radiant cooling, have prompted a review of evaporative cooling in temperate maritime climates. The thermal efficiency of such systems is a key parameter, as a measure of the degree to which the system has succeeded in exploiting the cooling potential of the ambient air. The feasibility of this concept depends largely however, on achieving low approach water temperatures within an appropriate cooling tower, at acceptable levels of energy performance. Previous experimental work for a full scale evaporative cooling system has shown that it …

The Fly Way, Daniel Moran, John Moya, Ruben Hernandez, Amaury F. Perez

COURI Symposium Abstracts, Summer 2012

This project is related to the way a common house fly’s eye works. Dr. Moya has received a patent that helps mimic the way the ommatidia(compound eye of the fly) processes and “pinpoints” the location of a given image / object. It is on the basis of this patent that his graduate students Ruben Hernandez and Amauri Perez have improved the programming of the algorithm that shows that an object can be effectively be detected by a camera interfaced with these programs. Potential applications include but are not limited to security (both public and private), robotic assisted surgical procedures/treatments, gaming…etc. …

Selection Of Critical Design Parameters For Mmod Protection In Interplanetary Missions, Lisa M. Haisan, Cesar Carrasco

COURI Symposium Abstracts, Summer 2012

This research presents a methodology for the selection of critical design-parameters for the design of Micro Meteoroid and Orbital Debris (MMOD) spacecraft protection based on a modified implementation of the concept of the Probability of No Impact (PNI). The PNI methodology, based on Poisson’s discrete statistics, has been widely used to determine critical particle sizes for the design of protection systems. However, it does not provide guidelines for the selection of the design impact speed, especially when the impact speed has a very wide statistical distribution like that encountered in interplanetary missions. The modifications to the PNI methodology presented here …

Poly(3,4-Ethylenedioxy-Thiophene)：Poly（Styrenesulfonate）（Pedot:Pss） As A Hole-Transporting/Electron-Blocking Interfacial Layer To Increase The Efficiency Of Polymer Bulk-Heterojunction Solar Cells, Yanyu Wu, Michael D. Irwin

COURI Symposium Abstracts, Summer 2012

Solar energy is playing a critical role in today’s renewable energy resources. Polymer bulk-heterojunction solar cells have the possibility to be cost-effective and highly efficient. However, the technology is fairly new and has not yet been perfected. Therefore, In order to enhance the efficiency of polymer bulk-heterojunction solar cells, thin layers of Poly(3,4-ethylenedioxy-thiophene)：poly（styrenesulfonate）（PEDOT:PSS） are inserted between the active organic layer, poly(3-hexylthiophene)(P3HT)+[6,6]-phenyl-C61 butyric acid methyl ester(PCBM), and the ITO(tin-doped indium oxide) anode of bulk-heterojunction ITO/P3HT:PCBM/LiF /Al solar cells. Both the interfacial layer, which is PEDOT: PSS, and the active layer are deposited by spin-coating. So far, I have been able to …

Systems Engineering, Caitlin A. Lambing, Eric D. Smith

COURI Symposium Abstracts, Summer 2012

Systems Engineering is a fast growing field in the engineering braches. It can be applied to anything that one can be described as a system. To show this, two different projects are being directed through the systems engineering department at UTEP. In the Student Busing Project, UTEP was granted funding from the Green Fund in order to pursuit the start of a busing system on campus. Research on other busing systems, as well as the effects and costs of adopting a busing system were researched. Surveys were completed, and additional research was done to see the environmental effects the buses …

Design, Fabrication, And Testing Of Flexible Inkjet-Printed Antennas, Yahiea M. H. Al-Naiemy

Theses and Dissertations

During the past four decades, microstrip antennas have attracted much attention due to their thin profile, ease of fabrication, low cost, and conformability. Inkjet-printing flexible antennas using highly conducting patterns can complement and extend the above-mentioned advantages to achieve modern, clean, fast, and reliable antenna fabrication technologies. Moreover, the use of nanoscale materials allows for the development of a new generation of modern printed circuit antennas. In this thesis, several microstrip antennas are presented with different geometries on both rigid and flexible substrates. The antennas were designed and simulated using two different 3D full-wave electromagnetic simulation tools: Ansoft's High Frequency …

Hydroshare: An Online, Collaborative Environment For The Sharing Of Hydrologic Data And Models, David G. Tarboton, R. Idaszak, Daniel Ames, J. Goodall, Jeffery S. Horsburgh, L. Band, V. Merwade, C. Song, A. Couch, D. Valentine, R. Hooper, J. Arrigo, D. Maidment, T. Whiteaker

Civil and Environmental Engineering Faculty Publications

No abstract provided.

The Influence Of Automation On Aviation Accident And Fatality Rates: 2000-2010, Nicholas A. Koeppen

Publications

The purpose of this project is to evaluate if technological advances and implementation of automation have produced a decrease in the number and severity of accidents in commercial aviation over the last decade. To accomplish this evaluation historical commercial aviation accident data from 2000 to 2010 will be examined. Commercial fixed wing and rotary wing data will be evaluated. No aviation incident data will be collected; the project will be limited in scope to commercial aviation accidents. Accidents highlighting major deficiencies involving automation will be discussed in detail. To further support the projects purpose, emphasis will be given to evaluate …

Monitoring Of The Aircraft Cabin Environment Via A Wireless Sensor Network, Michael Pook, Sin Ming Loo, Joshua Kiepert

Electrical and Computer Engineering Faculty Publications and Presentations

Wireless sensor networks consist of physically distributed autonomous sensor nodes that cooperatively monitor physical or environmental conditions. The key benefit of wireless sensor networks is that they are capable of generating a more complete view of the sensed environment by acquiring larger quantities of correlated data than independent sensor monitors. This makes them ideally suited for applications where a complex environment with many interdependent factors must be monitored. The aircraft cabin is one such example of a highly dynamic environment which necessitates the use of an advanced sensing system. Thus, in order to gain a better understanding of the aircraft …

A Portable Wireless Particulate Sensor System For Continuous Real-Time Environmental Monitoring, James A. Hall Jr., Sin Ming Loo, Dale Stephenson, Ross Butler, Michael Pook, Joshua Kiepert, Jordan Anderson, Nicholas Terrell

Electrical and Computer Engineering Faculty Publications and Presentations

Airborne particulate matter has been shown to be associated with morbidity and mortality, and may interfere with certain sensitive experiment. Understanding the levels and movements of particulate matter in an enclosed space can lead to a reduction in the impact of this material on health and experimental results. A system of environmental sensors including particulate matter, selected gasses, humidity, temperature, and pressure can be used to assist in tracking air movement, providing real-time mapping of potential contaminants as they move through a space. In this paper we present a system that is capable of sensing these environmental factors, collecting data …

High-Throughput Rear-Surface Drilling Of Microchannels In Glass Based On Electron Dynamics Control Using Femtosecond Pulse Trains, Lan Jiang, Pengjun Liu, Xueliang Yan, Ni Leng, Chuancai Xu, Hai Xiao, Yongfeng Lu

Mechanical and Aerospace Engineering Faculty Research & Creative Works

This study proposes a rear-surface ablation enhancement approach to fabricate high-aspect-ratio microchannels by temporally shaping femtosecond laser pulse trains. in the case study of K9 glass, enhancements of up to a 56 times higher material removal rate and a three times greater maximum drilling depth are obtained by the proposed method, as compared with conventional femtosecond laser drilling at the same processing parameters. the improvements are due to the changes of photon-electron interactions by shaping femtosecond pulse train, which can effectively adjust the photon absorption and localized transient material properties by changing electron dynamics such as free electron densities. © …

Transition Of Deformation Behavior In An Ultrafine Grained Magnesium Alloy, S. K. Panigrahi, K. Kumar, N. Kumar, W. Yuan, R. S. Mishra, R. Delorme, B. Davis, R. A. Howell, K. Cho

Materials Science and Engineering Faculty Research & Creative Works

The deformation behavior of friction stirs processed magnesium alloy with average grain size ranging from 25 μm to 240 nm was studied. an evaluation of critical grain size for transition of deformation mode from twinning to slip was carried out by employing tensile and compressive tests. the role of critical grain size in transition of deformation behavior from strain hardening to softening was established. Inhomogeneous yielding was observed during tensile test of ultrafine-grained magnesium alloy below the critical grain size. © 2012 Elsevier B.V.

Ceas E-News 07.13.2012, College Of Engineering And Applied Sciences

College of Engineering and Applied Sciences News

Sunseeker Earns Second Place, Michigan GEAR UP Events,

Complex Geometries For Particle Image Velocimetry (Piv) Testing, Elaine T. Maestas, Ryan Wicker, David Espalin, Francisco R. Medina

COURI Symposium Abstracts, Summer 2012

Clear, physical models or phantoms are needed for particle image velocimetry (PIV) to accurately record fluid velocities within complex geometries including anatomical structures. Based on Karina Arcaute’s work on “Complex Silicon Cardiovascular Models Manufactured Using a Dip-Spin Coating Technique”, a box casting technique was developed to provide the most effective phantom for testing. The phantom is required to be free of visual obstructions, thus allowing a CCD camera to capture accurate velocity readings. In this study, complex parts were made of a water-soluble material and sanded until all ridges were removed. The model was created using a fused deposition modeling …

Asphalt Testing: Enhancing The Roads, Andrea Gutierrez, Soheil Nazarian, Anjan K. Siddagangaiah

COURI Symposium Abstracts, Summer 2012

At the University of Texas at El Paso, the Center for Transportation Infrastructure Systems is conducting several asphalt tests to ensure the quality of the asphalt and the safety of the public. The tests determine special engineering properties of the material such as the strength and aggregate-asphalt ratio that are crucial to the life span of the asphalt on the field. The five tests that are conducted are:

• Maximum Theoretical Specific Gravity Test (GMM) – used to find the density of the material
• Bulk Specific Gravity Test (GMB) – determines the air pockets (air voids) in the material using the …

Performance Comparisons Of Personal And Professional-Grade 3d Printers, Alfonso Fernandez, Ryan Wicker, Francisco R. Medina, David Espalin

COURI Symposium Abstracts, Summer 2012

The recent emergence of personal 3D printers (i.e., systems that cost $5,000 or less) has engaged a new class of users including hobbyists, tinkerers, entrepreneurs, and do-it-yourselfers. Over 20,000 personal 3D printers were sold in 2011, and thus there is a need for users to understand the cost and performance of personal 3D printers as compared to low-cost professional-grade machines (i.e., systems that cost between $5,000 and $20,000). The cost, process time, material usage, and dimensional accuracy was assessed for select personal 3D printers and low-cost professional-grade systems. The study showed that the laminated object manufacturing (LOM) printer generated 80% …

Tiny Satellites For Stem, Carlos G. Niederstrasser

Robert "Bob" Twiggs STEM Education Collection

A PowerPoint presentation created by Carlos G. Niederstrasser titled "Tiny Satellites for STEM" from July 13, 2012.

Homogeneous Viologens For Use As Catalysts In Direct Carbohydrate Fuel Cells, Dane C. Hansen

Theses and Dissertations

Deriving electrical energy from glucose and other carbohydrates under mild conditions is an important research objective because these biomolecules are abundant, renewable, and can provide 12 to 24 electrons per molecule, yielding substantial electrical power. It was previously observed that disubstituted viologens, salts of N,N'-disubstituted 4,4'-bipyridine, are able to oxidize glucose under alkaline conditions. Building on that initial result, the objective of this work was to understand and quantify the effectiveness and utility of viologens as catalysts for use in direct carbohydrate fuel cells.The extent that viologens oxidize carbohydrates, the conditions under which that oxidation occurs, and the mechanism for …

Buckling And Crippling Of Square Steel Thin-Walled Tubes Fabricated With Symmetrically-Overlapping U-Channels And Foam, David Camenish Gelder

Theses and Dissertations

Testing and analysis has been performed on square steel thin-walled tubes fabricated using symmetrically-overlapping U-channels and foam. This research analyzes flange-to-flange attachment, effect of foam in the columns, effect of adhesive stiffness, and influence of steel thickness, as related to the local buckling loads, global buckling loads, and crippling loads. Four 14-foot (4.27 m) foam-filled, thin-walled, galvanized steel columns were manufactured by Novatek, Inc. and tested in axial compression with pinned boundary conditions. For three of the four configurations, the two-piece 4-in. (10.2-cm) square shell surrounded prefabricated polystyrene foam inserts; the fourth column had no foam insert. The column outer …

A Comparative Study Of Strength And Stiffness Of Thin-Walled Specimens Fabricated By Fdm And 3d Printing Technologies, Miranda Rodrigo

Theses and Dissertations

Rapid Prototyped part failure constitutes a major issue for both RP providers and customers. When parts fail the reputation of the vendor is heavily deteriorated, customer dissatisfaction increase and replacement of the broken parts is often necessary to avoid the loss of future business. Product design teams often run into situations where Rapid Prototyped parts are not able to withstand shipping and handling and delivered broken or while demonstrating and examining the parts. When done in the face of customers this builds a perception of poor quality and lack of aptitude on the design group as well as the RP …

A Critical Examination Of The Construct Validity Of The Tti Performance DnaTm Survey For The Purpose Of Differentiating The Entrepreneurially-Minded Engineer, Sandra L. Dietrich

Master's Theses and Doctoral Dissertations

The United States needs workers with more than technical skills to meet the demands of global competition; more specifically, a new breed of engineer is necessary, one who possesses leadership skills and business acumen in addition to the technical engineering skills. One Midwestern foundation has recognized this challenge and is working with engineering universities to enhance programs to create entrepreneurially-minded engineers (EMEs). To this end, the Target Training International, Ltd. (TTI) Performance DNATM survey has been developed to measure the behaviors, values, and professional skills of these EMEs. Currently, the Foundation has collected data using this survey with engineering students …

Using Life Cycle Assessment To Compare Wind Energy Infrastructure, Brendan Cleary, Aidan Duffy, Alan O'Connor

Conference papers

Given the need to significantly reduce greenhouse gas (GHG) emissions due to the production of electricity, countries worldwide are trying to develop and implement different energy saving strategies and technologies to mitigate global warming. A core part of achieving this is the development and implementation of renewable energy technologies such as wind.

This has resulted in the development and innovation of wind turbines with output ranges of 10-15MW likely to be deployed by 2020. This increased output has a knock on effect on the growth of rotor diameters and tower heights requiring the wind turbine system to be assessed from …

Effect Of Shock Front Geometry On Shock Depolarization Of Pb(Zr 0.52ti 0.48)O₃ Ferroelectric Ceramics, S. I. Shkuratov, Jason Baird, E. F. Talantsev

Mining Engineering Faculty Research & Creative Works

By use of experimentation, we detected a shock wave geometry effect on the depolarization of poled PbZr_0.52Ti_0.48)O₃ Z(PZT 52/48) ferroelectrics. It follows from the experimental results that shock front geometry is one of key parameters in the shock depolarization of PZT 5248 ferroelectrics. This shock depolarization effect forms a fundamental limit to miniaturization of explosive-driven shock-wave ferroelectric generators (FEGs). Based on obtained experimental results, we developed miniature generators that reliably produce pulsed voltages exceeding 140 kV.