Engineering Commons^™

Comparative Analysis Of The Biaxial Mechanical Behavior Of Carotid Wall Tissue And Biological And Synthetic Materials Used For Carotid Patch Angioplasty, Alexey Kamenskiy, Iraklis I. Pipinos, Jason N. Mactaggart, Syed A. Jaffar Kazmi, Yuris A. Dzenis

Department of Mechanical and Materials Engineering: Faculty Publications

Patch angioplasty is the most common technique used for the performance of carotid endarterectomy. A large number of patching materials are available for use while new materials are being continuously developed. Surprisingly little is known about the mechanical properties of these materials and how these properties compare with those of the carotid artery wall. Mismatch of the mechanical properties can produce mechanical and hemodynamic effects that may compromise the long-term patency of the endarterectomized arterial segment. The aim of this paper was to systematically evaluate and compare the biaxial mechanical behavior of the most commonly used patching materials. We compared …

It’S Not What You Think: A Theory For Understanding The Lack Of Interest Among Domestic Students In The Engineering Phd, Michelle C. Howell Smith, Amanda L. Garrett, Ellen Weissinger, Namas Chandra

Department of Mechanical and Materials Engineering: Faculty Publications

We live in a fast-paced world surrounded by technological advances. Engineers with advanced skills perform important functions in our society. However we know very little about how engineers consider obtaining advanced education and skills. The purpose of this study is to understand and develop a theory explaining the process domestic engineers undergo in developing an interest in obtaining a PhD in engineering. Our research was guided by the following central research question: What is the theory that explains the process of developing interest in doctoral-level engineering education for engineers? We used qualitative, grounded theory methods, to investigate the process of …

Frequency Shifts In Plate Crystal Resonators Induced By Electric, Magnetic, Or Mechanical Fields In Surface Films, Nan Liu, J.S. Yang, Yuantai Hu, Xuedong Chen, Wei Jiang

Department of Mechanical and Materials Engineering: Faculty Publications

We study frequency shifts in plate crystal resonators with surface films. The films are multiphysical, including the effects of inertia, stiffness, intrinsic stress, piezoelectric coupling, and piezomagnetic coupling. Mindlin’s two-dimensional equations for a crystal plate with two elastic surface films are generalized to include the multiphysical effects of the films. They are used to study thickness-shear vibrations of a rotated Y-cut quartz plate with initial fields resulting from the mechanical, electric, and magnetic fields in the surface films. Frequency shifts caused by the initial fields are calculated and examined. Results show that plate crystal resonators with multiphysical surface films may …

A Few Transient Effects In At-Cut Quartz Thickness-Shear Resonators, Runyu Zhang, Hongping Hu

Department of Mechanical and Materials Engineering: Faculty Publications

We study a few transient effects of AT-cut quartz thickness-shear resonators, including resonator turning on and turning off as well as voltage amplitude and frequency fluctuations. Mindlin’s two-dimensional plate equations are used and solved analytically. Both a sudden change and a gradual change of the driving voltage are studied. It is found that for a resonator with a frequency of 1.649430868 MHz and material quality factor of Q = 10⁵, the characteristic time scale of the transient effects is of the order of 0.1 s.

Use Of Environmental Scanning Electron Microscopy For In Situ Observation Of Interaction Of Cells With Micro- And Nanoprobes, Alexander Goponenko, B. J. Boyle, K. I. Jahan, Maxim V. Gerashchenko, Dmitri E. Fomenko, Vadim N. Gladyshev, Yuris A. Dzenis

Department of Mechanical and Materials Engineering: Faculty Publications

Precision intracellular sensing, probing and manipulation offer unprecedented opportunities for advances in biological sciences. Next-generation ultra-fine probes will be capable of targeting individual cell organelles. Development of such probes as well as probes capable of penetrating through tough cell walls requires detailed knowledge of cell-probe interaction. This Letter evaluated the applicability of environmental scanning electron microscopy (ESEM) for cell and cell-probe interaction imaging. Several types of cells (plant and yeast cells as well as mouse spermatozoa) were successfully imaged in their natural state, with mouse spermatozoa observed by ESEM for the first time. Computerized stage applied to image was tough …

Biocomposites Developed Using Water-Plasticized Wheat Gluten As Matrix And Jute Fibers As Reinforcement, Narendra Reddy, Yiqi Yang

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Biocomposites developed from wheat gluten using water without any chemicals as plasticizer and jute fibers as reinforcement have much better flexural and tensile properties than similar polypropylene composites reinforced with jute fibers. Wheat gluten is an inexpensive and abundant co-product derived from renewable resources and is biodegradable but non-thermoplastic. Previous attempts at developing biocomposites from wheat gluten have used plasticizers such as glycerol or chemical modifications to make gluten thermoplastic. However, plasticizers have a considerably negative effect on the mechanical properties of the composites and chemical modifications make wheat gluten less biodegradable, expensive and/or environmentally unfriendly. In the research reported, …

Corn Seed Spacing Uniformity As Affected By Seed Tube Condition, Michael F. Kocher, John M. Coleman, John A. Smith, Stephen D. Kachman

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Variation in corn seed spacing from a John Deere MaxEmerge^TM Plus Vacumeter planter was evaluated on the University of Nebraska Planter Test Stand in a laboratory setting for two seed tube conditions (new or worn) with two examples of corn seed shape (round or flat). Seed spacing uniformity was measured using three seed spacing uniformity parameters: Coefficient of Precision (CP3), ISO Multiples index, and ISO Miss index.

Differences were detected in all three seed spacing uniformity parameters due to the seed tube condition. The new seed tubes had better seed spacing uniformity than the worn seed tubes, within each …

Spatial Variability Of Field Machinery Use And Efficiency, Viacheslav I. Adamchuk, Robert Grisso, Michael F. Kocher

Department of Agricultural and Biological Systems Engineering: Faculty Publications

In site-specific crop management, It is a common practice to log the geographic coordinates of agricultural machinery measured using a global satellite navigation system (GNSS) such as the global positioning system (GPS). Yield, fertilizer application, and seed placement maps provide useful data for making agronomic decisions. However, the travel path itself reveals valuable information about machinery performance. Often, during field operations, odd field shapes, obstacles, or contour farming will require operators to increase the complexity of the machinery maneuvering. This usually reduces field efficiency. This chapter presents a methodology to parameterize the spatially variable characteristics of traffic patterns, and to …

Completely Biodegradable Soyprotein–Jute Biocomposites Developed Using Water Without Any Chemicals As Plasticizer, Narendra Reddy, Yiqi Yang

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Soyprotein–jute fiber composites developed using water without any chemicals as the plasticizer show much better flexural and tensile properties than polypropylene–jute composites. Co-products of soybean processing such as soy oil, soyprotein concentrate and soy protein isolates are inexpensive, abundantly available and are renewable resources that have been extensively studied as potential matrix materials to develop biodegradable composites. However, previous attempts on developing soy-based composites have either chemically modified the co-products or used plasticizers such as glycerol. Chemical modifications make the composites expensive and less environmentally friendly and plasticizers decrease the properties of the composites. In this research, soyprotein composites reinforced …

Verifying Power Claims Of High‐Power Agricultural Tractors Without A Pto To Sell In Nebraska, Michael F. Kocher, Viacheslav Adamchuk, John A. Smith, Roger M. Hoy

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Nebraska law requires the Nebraska Tractor Test Board of Engineers to compare results of the tests of an agricultural tractor model with the manufacturer's claims regarding power, fuel use, and other performance ratings in order to recommend a permit to sell that tractor model in the state. PTO tests are conducted to verify the manufacturer's PTO power and fuel claims for tractor models. In recent years, several tractor manufacturers have been producing models of large tractors either without a PTO or with a PTO not capable of transmitting the full engine power and, therefore, have chosen to advertise engine power. …

Evaluation Of Soil Salinity Leaching Requirement Guidelines, John Letey, Glenn J. Hoffman, Jan W. Hopmans, Stephen R. Grattan, Donald Louis Suarez, Dennis L. Corwin, Jim D. Oster, Laosheng Wu, Christopher Amrhein

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Water for irrigation is a major limitation to agricultural production in many parts of the world. Use of waters with elevated levels of salinity is one likely option to meet the supply of increased demands. The sources of these waters include drainage water generated by irrigated agriculture, municipal wastewater, and poor quality groundwater. Soil salinity leaching requirements that were established several decades ago were based on steady-state conditions. Recently transient-state models have been developed that potentially can more correctly predict the dynamics of the chemical–physical–biological interactions in an agricultural system. The University of California Center for Water Resources appointed a …

Comparison Of Subsurface And Surface Runoff Phosphorus Transport Rates In Alluvial Floodplains, Aaron R. Mittelstet, Derek M. Heeren, Garey A. Fox, Daniel E. Storm, Michael J. White, Ronald B. Miller

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Phosphorus (P) loading to streams can occur by both surface runoff and subsurface transport, with subsurface P transport often assumed negligible. Groundwater P concentrations in alluvial aquifers can be significant, especially in preferential flow paths (PFPs). The objectives of this research were to quantify subsurface P transport rates at two sites in northeastern Oklahoma and to compare them with surface runoff P transport rates derived from a hydrologic model, the Pasture Phosphorus Management Calculator (PPM Plus). Ozark ecoregion study sites were adjacent to the Barren Fork Creek and Honey Creek in northeastern OK, USA. Each site, instrumented with 24 observation …

Development Of Deficit Irrigation Strategies For Corn Using A Yield Ratio Model, Derek M. Heeren, Todd P. Trooien, Hal D. Werner, Norman L. Klocke

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Competition for water is increasing while a growing world population requires more food production. It is critical to develop and implement efficient deficit irrigation strategies and to predict the impacts of deficit irrigation on yield. South Dakota State University (SDSU) Management Software, which simulates evapotranspiration and soil water contents, was originally designed as an on-farm decision support system capable of fully automating center pivot irrigation. A simple yield model was developed for the software in order to extend its use for evaluating deficit irrigation strategies. Yield ratio (i.e., actual yield/potential yield) was predicted based on a normalized transpiration ratio (i.e., …

Flow And Transport Experiments For A Streambank Seep Originating From A Preferential Flow Pathway, Garey A. Fox, Derek M. Heeren, Ronald B. Miller, Aaron R. Mittelstet, Daniel E. Storm

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Streambank seeps commonly originate from localized heterogeneity or preferential flow pathways (PFPs) in riparian floodplains. However, limited field data have been reported on ground water seep flows and solute transport to seeps from PFPs. The objective of this research was to build upon previous floodplain-scale investigations of PFPs by analyzing seep discharge and transport characteristics through a single PFP. An important research question was whether this PFP could be conceptualized as a homogeneous, one-dimensional flow path. Streambank seep discharge measurements were obtained by inducing a hydraulic head in a trench injection system. Also, co-injection of Rhodamine WT (RhWT) and a …

In Vivo Magnetic Resonance Elastography Of Mesenchymally Derived Constructs, Shadi F. Othman, Evan T. Curtis, Huihui Xu

Department of Agricultural and Biological Systems Engineering: Faculty Publications

The multidisciplinary field of tissue engineering (TE) aims to create biological substitutes to restore, maintain, or enhance the function of tissue or whole organs, in which the mechanical properties of replacements are critical to their structure and function. Several techniques have been investigated for measuring the mechanical properties of developing tissues and organs; however, current methods are destructive. The goal of this work is to apply high resolution Magnetic Resonance Elastography (μMRE) technique with 100 μm in-plane resolution to address a critical problem in TE: nondestructive monitoring and characterization of growing mesenchymal stem cells (MSCs)-based tissue engineered constructs. In this …

Effect Of Flow Gradient, Roi Size And Random Scatterer Movement During Speckle Size Estimation Based Blood Flow Measurement, Tiantian Xu, Greg Bashford

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Conventional blood flow velocity measurement using ultrasound is capable of resolving the axial component (i.e., that aligned with the ultrasound propagation direction) of the blood flow velocity vector. However, these Doppler-based methods are incapable of detecting blood flow in the direction normal to the ultrasound beam. An algorithm which measures the lateral blood flow velocity using speckle size change with scan velocity was developed in our previous studies. This method uses the apparent speckle size change that occurs when scatterers are moving relative to the spatial rate of A-line acquisition. Our previous results showed that the estimation error of this …

Evaluation Of Select Sensors For Real-Time Monitoring Of Escherichia Coli In Water Distribution Systems, Syreeta L. Miles, Ryan G. Sinclair, Mark R. Riley, Ian L. Pepper

Department of Agricultural and Biological Systems Engineering: Faculty Publications

This study evaluated real-time sensing of Escherichia coli as a microbial contaminant in water distribution systems. Most sensors responded to increased E. coli concentrations, showing that select sensors can detect microbial water quality changes and be utilized as part of a contaminant warning system.

Biological Approaches For Addressing The Grand Challenge Of Providing Access To Clean Drinking Water, Mark R. Riley, Charles P. Gerba, Menachem Elimelech

Department of Agricultural and Biological Systems Engineering: Faculty Publications

The U.S. National Academy of Engineering (NAE) recently published a document presenting “Grand Challenges for Engineering”. This list was proposed by leading engineers and scientists from around the world at the request of the U.S. National Science Foundation (NSF). Fourteen topics were selected for these grand challenges, and at least seven can be addressed using the tools and methods of biological engineering. Here we describe how biological engineers can address the challenge of providing access to clean drinking water. This issue must be addressed in part by removing or inactivating microbial and chemical contaminants in order to properly deliver water …

Development Of An Angular Scanning System For Sensing Vertical Profiles Of Soil Electrical Conductivity, Viacheslav Adamchuk, Ahmad S. Mat Su, Roger A. Eigenberg, Richard B. Ferguson

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Apparent soil electrical conductivity (EC_a) is typically mapped to define soil spatial variability within an agricultural field. Knowledge of the vertical variability of EC_a is desired to define the site‐specific behavior of the soil profile. A pneumatic angular scanning system (PASS) was developed to sense horizontal and vertical changes of EC_a on‐the‐go with an electromagnetic induction (EMI) instrument using an angular scanning method. This sensor system consists of a sled with a rotating mechanism, an EMI sensor, an inclinometer, and a pneumatic actuator. The system was evaluated at the University of Nebraska‐Lincoln Agricultural Research and Development …

Improved Soil Mixing And Delivery System For A Storm Runoff Simulator, William C. Alms, Thomas G. Franti, David P. Shelton

Department of Agricultural and Biological Systems Engineering: Faculty Publications

An earlier version of a storm runoff simulator to test conservation buffers reproduced target hydrographs and sedigraphs using uniform, fine sand; however, it was unable to uniformly mix and deliver native sediment. The objectives of this work reported were to create a method to process native agricultural sediment, mix a uniform sediment slurry at a target concentration, and create a control system that will deliver the slurry in varying flow rates corresponding to a target sedigraph. Eroded silty clay (14% sand) was scraped, dried, and processed with a hammer mill. A sand (93% sand) and loam (44% sand) were dried …

Identification Of Holocarboxylase Synthetase Chromatin Binding Sites In Human Mammary Cell Lines Using The Damid Technology, Dipika Singh, Angela K. Pannier, Janos Zempleni

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Holocarboxylase synthetase (HCS) is a chromatin protein that is essential for mediating the covalent binding of biotin to histones. Biotinylation of histones plays crucial roles in the repression of genes and repeats in the human genome. We tested the feasibility of DNA adenine methyltransferase identification (DamID) technology to map HCS binding sites in human mammary cell lines. Full-length HCS was fused to Dam for subsequent transfection into breast cancer (MCF-7) and normal breast (MCF-10A) cells. HCS docking sites in chromatin were identified by using the unique adenine methylation sites established by Dam in the fusion construct; docking sites were unambiguously …

Flocculation Of Wall-Deficient Cells Of Chlamydomonas Reinhardtii Mutant Cw15 By Calcium And Methanol, Matt Scholz, Takanori Hoshino, Mark R. Riley, Joel Cuello

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Flocculation is a common and inexpensive method for harvesting algae from solution. After nitrogen starvation, it was shown that 83 + 3% of the wall-deficient cells of the cw 15 mutant of Chlamydomonas reinhardtii flocculated from 12 mL samples within 15 min after the addition of 15 mM calcium chloride at pH 8.4. Only 24 2% of the wildtype strain flocculated under these conditions, thus demonstrating how a simple mutation might facilitate process design. The data suggested that algae grown in waters with similar calcium concentrations (e.g. certain wastewaters) might be harvested through simple pH adjustment. It was also discovered …

Performance Of Extended Shuttleworth‐Wallace Model For Estimating And Partitioning Of Evapotranspiration In A Partial Residue‐Covered Subsurface Drip‐Irrigated Soybean Field, Lameck O. Odhiambo, Suat Irmak

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Estimation of actual evapotranspiration (ET), especially its partitioning into plant transpiration (T) and soil evaporation (E), in agricultural fields is important for effective soil water management and conservation and for understanding the interactions between ET, T, and E with the management practices. Direct field measurements of ET, T, and E rates are difficult and costly; hence, mathematical models are used for estimating them. The objective of this study was to evaluate the practical applicability of the Shuttleworth‐Wallace (S‐W) model to estimate and partition ET in a subsurface drip‐irrigated soybean (Glycine max L. Merr.) field with partial residue cover. While its …

Irrigation Efficiency And Uniformity, And Crop Water Use Efficiency, Suat Irmak, Lameck O. Odhiambo, William L. Kranz, Dean E. Eisenhauer

Department of Agricultural and Biological Systems Engineering: Faculty Publications

This Extension Circular describes various irrigation efficiency, crop water use efficiency, and irrigation uniformity evaluation terms that are relevant to irrigation systems and management practices currently used in Nebraska, in other states, and around the world. The definitions and equations described can be used by crop consultants, irrigation district personnel, and university, state, and federal agency personnel to evaluate how efficiently irrigation water is applied and/or used by the crop, and can help to promote better or improved use of water resources in agriculture.

As available water resources become scarcer, more emphasis is given to efficient use of irrigation water …

A Case Study Concerning The Effects Of Controller Response And Turning Movements On Application Rate Uniformity With A Self-Propelled Sprayer, Joe D. Luck, A. Sharda, Santosh Pitla, J. P. Fulton, S. A. Shearer

Department of Agricultural and Biological Systems Engineering: Faculty Publications

The use of precision agriculture technologies such as automatic boom section control allows producers to reduce off-target application when applying herbicides. While automatic boom section control provides benefits, pressure differences across the spray boom resulting from boom section actuation may lead to off-rate application errors. Off-rate errors may also result from spray rate controller compensation for ground speed changes or velocity variation across the spray boom during turning movements. This project focused on characterizing application rate variation for three fields located in central Kentucky. GPS coordinates, boom control status, and nozzle pressure data (at 15 nozzle locations) were recorded as …

A Novel Biodiesel And Glycerol Carbonate Production Plant, Nghi T. Nguyen, Yaşar Demirel

Yaşar Demirel Publications

Crude glycerol is the byproduct of biodiesel production plant and the economic value of glycerol may affect the profitability of the biodiesel production plant. As the production rate of bioglycerol increases, its market values drop considerably. Therefore, conversion of bioglycerol into value-added products can reduce the overall cost, hence, leading to a more economical biodiesel production plant. In a direct carboxylation reaction, CO₂ reacts with glycerol to produce glycerol carbonate and water. This study presents a direct comparison of the economic analysis of the conventional biodiesel production plant and the possible next generation biodiesel-glycerol carbonate production plant. At the …

Using Thermally Coupled Reactive Distillation Columns In Biodiesel Production, Nghi Nguyen, Yaşar Demirel

Yaşar Demirel Publications

Production of ethyl dodecanoate (biodiesel) using lauric acid and methanol with a solid acid catalyst of sulfated zirconia is studied by using two distillation sequences. In the first sequence, the methanol recovery column follows the reactive distillation column. In the second sequence, the reactive distillation and methanol recovery columns are thermally coupled. Thermally coupled distillation sequences may consume less energy by allowing interconnecting vapor and liquid streams between the two columns to elminate reboiler or condenser or both. Here we study the thermally coupled side-stripper reactive distillation and eliminate the condenser of the reactive distillation column. Both the sequences are …

Glypican-3 Targeting Of Liver Cancer Cells Using Multifunctional Nanoparticles, James O. Park, Zachary Stephen, Conory Sun, Omid Veiseh, Forrest M. Kievit, Chen Fang, Matthew Leung, Hyejung Mok, Miqin Zhang

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Imaging is essential in accurately detecting, staging, and treating primary liver cancer (hepatocellular carcinoma [HCC]), one of the most prevalent and lethal malignancies. We developed a novel multifunctional nanoparticle (NP) specifically targeting glypican-3 (GPC3), a proteoglycan implicated in promotion of cell growth that is overexpressed in most HCCs. Quantitative real-time polymerase chain reaction was performed to confirm the differential GPC3 expression in two human HCC cells, Hep G2 (high) and HLF (negligible). These cells were treated with biotin-conjugated GPC3 monoclonal antibody (aGPC3) and subsequently targeted using superparamagnetic iron oxide NPs conjugated to streptavidin and Alexa Fluor 647. Flow cytometry demonstrated …

Impact Of Signal Timing Information On Safety And Efficiency Of Signalized Intersections, Anuj Sharma

Department of Civil and Environmental Engineering: Faculty Publications

Signalized intersections are provided in traffic networks to improve the safety and efficiency of vehicular and pedestrian movement. There are various measures under education, enforcement and engineering headings that are being attempted to improve safety and efficiency of operations at a signalized intersection. Provision of signal countdown timer, a timer showing the remaining red and green time in a phase, is one such measure and is commonly adopted in India. However, studies on effects of countdown timer under Indian traffic conditions are very scarce. Traffic heterogeneity and lack of lane discipline makes transferability of models developed in other countries (with …

Role Of Information On Probability Of Traffic Conflict On The Onset Of Yellow, Nathaniel P. Burnett, Anuj Sharma

Department of Civil and Environmental Engineering: Faculty Publications

This paper examines the effect of information provided to drivers through advance warning flashers (AWFs) on driver’s probability of conflict at the onset of yellow at a high-speed intersection. AWFs are specifically designed to minimize the number of vehicles trapped in their respective dilemma zones at the onset of yellow. A probit modeling technique was used to establish dilemma zone boundaries. Based on the dilemma zone boundaries probability of a perceived conflict curves was computed and compared against actual conflicts observed at each of the studied intersections. The comparison between the actual and theoretical probability of conflict curves generated a …