Engineering Commons^™

Evidence Supporting Measure Of Similarity For Reducing The Complexity In Information Fusion, Xinde Li, Jean Dezert, Florentin Smarandache, Xinhan Huang

Branch Mathematics and Statistics Faculty and Staff Publications

This paper proposes a new solution for reducing the number of sources of evidence to be combined in order to diminish the complexity of the fusion process required in some applications where the real-time constraint and strong computing resource limitation are of prime importance. The basic idea consists in selecting, among the whole set of sources of evidence, only the biggest subset of sources which are not too contradicting based on a criterion of Evidence Supporting Measure of Similarity (ESMS) in order to process solely the coherent information received. The ESMS criterion serves actually as a generic tool for outlier …

Nonuniformity In Lattice Contraction Of Bismuth Nanoclusters Heated Near Its Melting Point, A. Esmail, M. Abdel-Fattah, Hani E. Elsayed-Ali

Electrical & Computer Engineering Faculty Publications

The structural properties of bismuth nanoclusters were investigated with transmission high-energy electron diffraction from room temperature up to 525 ± 6 K. The Bi nanoclusters were fabricated by thermal evaporation at room temperature on transmission electron microscope grids coated with an ultrathin carbon film, followed by thermal and femtosecond laser annealing. The annealed sample had an average cluster size of ∼14 nm along the minor axis and ∼16 nm along the major axis. The Debye temperature of the annealed nanoclusters was found to be 53 ± 6 K along the [012] direction and 86 ± 9 K along the [110] …

Towards Reducing Traffic Congestion Using Cooperative Adaptive Cruise Control On A Freeway With A Ramp, George Arnaout, Shannon Bowling

Engineering Management & Systems Engineering Faculty Publications

Purpose: In this paper, the impact of Cooperative Adaptive Cruise Control (CACC) systems on traffic performance is examined using microscopic agent-based simulation. Using a developed traffic simulation model of a freeway with an on-ramp - created to induce perturbations and to trigger stop-and-go traffic, the CACC system’s effect on the traffic performance is studied. The previously proposed traffic simulation model is extended and validated. By embedding CACC vehicles in different penetration levels, the results show significance and indicate the potential of CACC systems to improve traffic characteristics and therefore can be used to reduce traffic congestion. The study shows that …

Selection Of Source And Use Of Traffic Information In Emergency Situations, R. Michael Robinson, Asad Khattak

VMASC Publications

The access and the use of advanced traveler information systems (ATISs) by drivers during normal commuting have been extensively assessed and analyzed. Emergency managers and transportation officials have extended the results of studies of ATIS use under routine conditions to emergency scenarios under the assumption that drivers' responses to information under emergency conditions mimic those seen under normal driving conditions. A recent survey of potential hurricane evacuees suggests the need to revisit this assumption. Results indicate that although commercial radio reports and variable message signs continue to be the sources of traffic information cited the most frequently, other information sources …

Wirelessly Sensing Resonate Frequency Of Passive Resonators With Different Q Values, Mathew Walter Lukacs

Electronic Theses and Dissertations

Numerous techniques exist for measuring temperature using passive devices such as SAW filters. However, SAW filters have a significant limitation regarding high temperature environments exceeding 1000⁰C [1]. There are several applications for a high temperature sensor in this range, most notably heat flux or temperature in turbine engines. For these environments, an alternative to SAW filters is to use a passive resonator. The resonate frequency will vary depending on the environment temperature. Understanding how the frequency changes with temperature will allow us to determine the environmental temperature. In order for this approach to work, it is necessary to induce resonance …

A Radar Interrogator For Wireless Passive Temperature Sensing, Jeffrey Charles Lambert

Electronic Theses and Dissertations

In this thesis I explore radio detection and ranging (RADAR) and software defined radio (SDR) in the context of wireless passive sensor interrogation. A RADAR topology is selected based upon preliminary measurements using ordinary laboratory instrumentation and then used for construction of a prototype X-band wireless measurement system using commercial, off-theshelf (COTS) components. This research explores the feasibility of wireless passive sensor interrogation through practical application of SDR and RADAR techniques to the interrogation of a wireless passive resonator signal. This work serves as a foundation for further research on sensor interrogation through establishment of critical system parameters in the …

Goodput Maximization In Cooperative Networks With Arq, Qing Chen, M. Cenk Gursoy

Department of Electrical and Computer Engineering: Faculty Publications

In this paper, the average successful throughput, i.e., goodput, of a coded 3-node cooperative network is studied in a Rayleigh fading environment. It is assumed that a simple automatic repeat request (ARQ) technique is employed in the network so that erroneously received packets are retransmitted until successful delivery. The relay is assumed to operate in either amplify-and-forward (AF) or decode-and-forward (DF) mode. Under these assumptions, retransmission mechanisms and protocols are described, and the average time required to send information successfully is determined. Subsequently, the goodput for both AF and DF relaying is formulated. The tradeoffs and interactions between the …

Modeling Small Molecule Elution From A Hydrogel Using A Microfluidic Technique, Stephanie Evans

Master’s Theses

Drug release from a fluid-contacting biomaterial is simulated using a microfluidic device with channels defined by solute-loaded hydrogel. In order to mimic a drug delivery device, a solution of poly(ethylene glycol) diacrylate (PEG-DA), solute, and photoinitiator is cured inside a microfluidic device with a channel through the center ofthe hydrogel. As water is pumped through the channel, solute diffuses out of the hydrogel and into the water. Channel sizes within the devices range from 300 µm to 1000 µm to simulate vessels within the body. The properties of the PEG hydrogel were characterizedby the extent of crosslinking, the swelling ratio, …

Investigation Of The Hygroscopic And Morphological Properties Of Atmospheric Aerosols, Laura Cook

Master’s Theses

The first objective of this thesis was to examine the hygroscopic and morphological nature of various substances through the use of an Environmental Scanning Electron Microscope (ESEM). The hygroscopic growth and changes in morphology for pure-component aerosols were studied for particles greater than 2 µm in size. Hygroscopic growth was observed through changes in relative humidity (RH) and hygroscopic growth curves were created. The second objective of this thesis, the hygroscopic growth of multi-component aerosol mixtures, was studied using Hygroscopic Tandem Differential Mobility Analysis(HTDMA). The size distribution for an aerosol stream was determined before and after the stream was subjected …

Synthesis And Surface Modification Of Cdse And Cds Quantum Dots Exhibiting High Quantum Yield, Jeweliet Yost

Master’s Theses

The thesis investigates the effect of surface treatment with various reducing and oxidizing agents on the quantum yield (QY) of CdSe and CdS quantum dots (QDs). The QDs, as synthesized by the organometallic method, contained defect sites on their surface that trapped photons and prevented their radiative recombination, therefore resulting in adecreased QY. To passivate these defect sites and enhance the QY, the QDs were treated with various reducing and oxidizing agents, including: sodium borohydride (NaBH4), calcium hydride (CaH2), hydrazine (N2H4), benzoyl peroxide (C14H10O4), and tert-butylhydroperoxide (C4H10O2). It was hypothesized that the reducing/oxidizing agents reduced the ligands on the QD …

A Study Of High Solids Anaerobic Digestion Of Bucknell University Food Waste Followed By Aerobic Curing, Margaret Drennan

Master’s Theses

Anaerobic digestion of food scraps has the potential to accomplish waste minimization, energy production, and compost or humus production. At Bucknell University, removal of food scraps from the waste stream could reduce municipal solid waste transportation costs and landfill tipping fees, and provide methane and humus for use on campus. To determine the suitability of food waste produced at Bucknell for high-solids anaerobic digestion (HSAD), a year-long characterization study was conducted. Physical and chemical properties, waste biodegradability, and annual production of biodegradable waste were assessed. Bucknell University food and landscape waste was digested at pilot-scale for over a year to …

An Investigation Of Two Ceramic Electron Conductors For Use In Solid Oxide Fuel Cell Anodes, Ian Hasson

Master’s Theses

Conducted work with two potential alternatives to Ni, La0.8Sr0.2Cr0.5Mn0.5 (LSCM) and Sr doped LaVO3 (LSV) to serve as the electron conductor in the anode of solid oxide fuel cells SOFCs.

Energy-Economical Heuristically Based Control Of Compass Gait Walking On Stochastically Varying Terrain, Christian Hubicki

Master’s Theses

Investigation uses simulation to explore the inherent tradeoffs ofcontrolling high-speed and highly robust walking robots while minimizing energy consumption. Using a novel controller which optimizes robustness, energy economy, and speed of a simulated robot on rough terrain, the user can adjust their priorities between these three outcome measures and systematically generate a performance curveassessing the tradeoffs associated with these metrics.

Corrosion Characteristics And Mechanical Properties Of Aluminum Coatings Applied By The Cold Spray Process, Ben Bouffard

Master’s Theses

Aluminum coatings were applied to 2024-T3 and 7075-T6 aluminum alloys via the Cold Spray process. The coatings were applied to substrateswith various surface preparation and Cold Spray carrier gas combinations. Some samples were coated with an additional sealant with and without a chromate conversion layer. An exhaustive corrosion analysis was then performed which utilized a number of long termand accelerated tests in order to characterize the corrosion protection of the coatings.

Development Of A Humanoid Robot Arm For Use In Urban Environments, Brenton Noll

Master’s Theses

The Bucknell Humanoid Robot Arm project was developed in order toprovide a lightweight robotic arm for the IHMC / Bucknell University bipedal robot that will provide a means of manipulation and facilitate operations in urban environments. The resulting fabricated arm described in this thesis weighs only 13 pounds, and is capable of holding 11 pounds fully outstretched, lifting objects such as tools, and it can open doors. It is also capable of being easily integrated with the IHMC / Bucknell University biped. This thesis provides an introduction to robots themselves, discusses the goals of the Bucknell Humanoid Robot Arm project, …

Aerosol Characterizaton In El Paso-Juarez Airshed Using Optical Methods, Angel E. Esparza

Open Access Theses & Dissertations

The assessment and characterization of atmospheric aerosols and their optical properties are of great significance for several applications such as air pollution studies, atmospheric visibility, remote sensing of the atmosphere, and impacts on climate change. Decades ago, the interest in atmospheric aerosols was primarily for visibility impairment problems; however, recently interest has intensified with efforts to quantify the optical properties of aerosols, especially because of the uncertainties surrounding the role of aerosols in climate change. The main objective of the optical characterization of aerosols is to understand their properties. These properties are determined by the aerosols' chemical composition, size, shape …

Development Of A Heat Transfer Test Rig For Finding Heat Transfer Characteristics Of Liquid Methane, Sergio Flores

Open Access Theses & Dissertations

Most large scale rocket engines use a regeneratively cooled system to cool the rocket engine using either the rocket fuel or oxidizer. The use of liquid methane as a rocket fuel is an emerging technology proving to have several advantages over current rocket fuels. However, liquid methane is lacking the extensive research as a rocket fuel compared to highly used rocket fuels like liquid hydrogen. A heat transfer test rig was built with the goal to characterize the heat transfer characteristics of liquid methane as it passes through a heated channel. The development of the test rig underwent considerations designed …

Evaluation And Recommendation Of Mix Design For Emulsion Stabilized Bases, Samuel Franco

Open Access Theses & Dissertations

Asphalt emulsion has been used for base material stabilization in a few TxDOT districts. Results from these practices were quite different. The initial performance of two projects on US287 constructed around 2000 in the Amarillo District has been found to be satisfactory. However, the Yoakum District has reported problems with asphalt emulsion for base work in a project on FM 237. The preliminary conclusion from these trials has been that asphalt emulsion may not perform well in the high humidity/high rainfall areas like east Texas. On the other hand, using calcium-based additives to stabilize base courses in road construction has …

On Feasibility Of Reducing Metal Fuel Content And Operating Temperatures In Chemical Oxygen Generators, Allen Garcia

Open Access Theses & Dissertations

Chemical oxygen generators are widely used in aircraft, submarines, spacecraft, and other applications, problems such as combustion instabilities and a risk of fire may be present. For example, due to malfunction of an oxygen generator, fire occurred onboard the Mir Space Station in 1997. It is thus important to improve the process stability and fire safety of chemical oxygen generators. Chemical compositions for oxygen generators include an oxygen source such as sodium chlorate (NaClO3), a transition metal oxide as a catalyst, and a metal fuel to provide energy for self-sustaining combustion. Eliminating or decreasing the metal fuel would decrease the …

Fundamental Studies Of Co-Base Superalloy Biomedical Prototypes Fabricated By Electron Beam Melting: Microstructures And Microstructural Architecture, Sara M. Gaytan

Open Access Theses & Dissertations

Rapid prototyping, especially electron beam melting (EBM) technology by ARCAM have proven to provide outstanding microstructural and mechanical properties on different alloys fabricated by this technology. Being a computer designed driven technology, complex components, that are hard or even impossible to fabricate by traditional manufacturing techniques, can be fabricated by layer-by-layer EBM technology.

Microstructural and mechanical properties are compared for an EBM femoral knee component prototype with a traditionally-fabricated and body-removed femoral knee implant. Block and cylindrical shape components fabricated by EBM were also analyzed for this project. The alloy utilized for these components is Co-26Cr-6Mo-0.2C characterized by the standards …

Variation Of Number And Mass Concentration Of Particulate Matter At The International Bridge Of The Americas In El Paso, Texas, Veronica Guerrero

Open Access Theses & Dissertations

Particle mass and number concentration measurements during different seasonal periods were conducted to study the effects caused by both privately own vehicles (POV) and commercial operated vehicles at the International Bridge of the Americas (BOTA), El Paso, Texas. There were two monitoring sites: UTEP air quality mobile monitoring site at the El Paso Water Utility (EPWU) located at the Chamizal National Memorial Park (CNMP) near the bridge. At this location measurements of traffic counts, size distribution, particle number and mass concentration PM"₁₀" (EP"₁₀"; El Paso PM"₁₀") and PM"_2.5" (EP"_2.5"; El …

Study Of Probabilistic Approach For Structural Health Assessment Of Aerospace Structures, Jose Antonio Garcia

Open Access Theses & Dissertations

Current practical approaches used in structural health assessment programs of aerospace structures involve performing a fracture mechanics analysis to verify the safe life of structural components. The analysis typically makes several conservative assumptions implemented by NASA fracture control standard practices for critical structural components. This well-established paradigm for fracture control follows a deterministic approach and, in some cases, the calculations may produce overly conservative remaining life estimates.

This thesis describes the results of a study to approach the health assessment challenge of several critical components using probabilistic methods. The probabilistic analysis takes the current deterministic model and identifies variables that …

Investigation On Flame Characteristics Of Oxy-Fuel Combustion, Md R. Islam

Open Access Theses & Dissertations

Oxy-fuel combustion is currently being considered by the U.S Department of Energy as a promising technology for efficient carbon capture. This technology could substantially reduce NOx and CO2 emissions. In addition, the implementation of oxy-fuel combustion technology in a power generation system could potentially reduce negative environmental impacts of fossil fuel use. It also encourages the use of reliable and domestic energy sources. The U.S. Department of Energy has made efforts to investigate the performance of a CO2 and H2O diluted oxy-fuel combustion system in a high-pressure combustor. In an effort to better understand and characterize the fundamental flame characteristics …

Photocatalytic Destruction Of Halogenated Organic Compounds In Water With A New Photocatalyst, Mabruka Hadidan

Open Access Theses & Dissertations

In this research, a newly developed high surface area semiconductor porous material was synthesized from potassium titanium niobium mixed oxide (KTiNbO5) to be used as a photo catalyst in the presence of UV light to degrade halogenated organic compounds in water. The goal of the project was to investigate the catalytic activity of the material for its effectiveness in the degradation of the halogenated organic compounds, and it is the first investigation of this new photocatalyst with halogenated compounds. Model compounds dichloromethane, 1-chlorobutane, chlorobenzene, and trifluoroacetic acid in aqueous solutions were tested with the photocatalyst under ultraviolet light irradiation, using …

Fractal-Cosysmo Systems Engineering Cost Estimation For Complex Projects, Manish Shivram Khadtare

Open Access Theses & Dissertations

Cost estimation for engineering projects has advanced beyond the bottom-up counting of costs and the top-down use of analogies. Parametric cost estimation is now employed to estimate volatile software costs, as well as the cost of Systems Engineering (SE) effort in engineering projects. The Constructive Systems Engineering Cost Model (COSYSMO) estimates the number of Person-Months (PM) necessary to complete systems engineering projects by using project size and cost parameters. On re-examining the nature of systems engineering and the structures of complex projects that must be built in an orderly fashion on a variety of scales, it is apparent that a …

Ballistic Projectile Metallurgical Issues And Fundamentals: Aerosol Production In Rod Penetration Erosion And Erosion Phenomena Associated With Railgun Development, Brenda Ivette Machado

Open Access Theses & Dissertations

The issue is derived from ballistic erosion as it relates to nanoparticle production and respiration of these particles as a health concern ballistic erosion and ballistic erosion as it relates to railgun performance. A common thread between these two issues is dynamic recrystallization (DRX). DRX has been demonstrated to be the dominant mechanism for solid-state flow associated with ballistic projectile/target penetration and interaction, friction-stir welding phenomena, and other high-strain rate deformation phenomena.

Aerosol particulates collected on filters from ballistic penetration and erosion events for W-Ni-Co and W-Ni-Fe kinetic energy rod projectiles penetrating steel target plates were observed to be highly …

Determination Of Critical Parameters For Solar Probe Plus Shielding, Sergio Rafael Mendez

Open Access Theses & Dissertations

A methodology to determine critical design parameters such as critical "design" particle size, and critical "design" impact speed for the shielding of the Solar Probe Plus spacecraft was developed in this thesis. Several critical components and surfaces of the spacecraft such as the Solar Array North, the Thermal Protection System, and the ISIS Instruments were analyzed in this study. The methodology determines the critical "design" particle size based on the required reliability or probability of no impact. Current NASA methods do not provide means to calculate critical "design" impact speeds for missions such as Solar Probe Plus, where the distributions …

A Combined X-Fem And Level Set Approach For Modeling Composite Material's Micro Structure, Himanshu Kumar

Open Access Theses & Dissertations

Composite materials are usually made of fibers and binding matrix. It's always a challenge to model composite materials' microstructure through the traditional finite element method because construction of an approximation space which is discontinuous across a given line or surface will place strict restrictions on the FE mesh. The interfacing of fibers in composites' microstructure through the standard finite element method is irksome and tedious because the presence of fiber presents a discontinuity in the binding material. In this present work, the composite's microstructure is modeled through the combined approach of Level Set and Extended Finite Element Method. The fiber …

The Effect Of Mmod Porosity On Crater Depth After Hypervelocity Impact, David Ledesma

Open Access Theses & Dissertations

A significant amount of research has been conducted in the last decades on the design of spacecraft shielding for the impacts of Micro Meteoroid and Orbital Debris (MMOD). Through the use of hydrocodes, empirical data, and physical testing, researchers have been successful in studying a wide range of shielding configurations. However, a very limited amount of research has been conducted to understand the effect that the porosity and irregular shape of MMOD has on the damage they create on spacecraft components.

The work presented in this thesis addresses the modeling of MMDO porosity by using the CTH hydrocode to investigate …

Accelerated Simulation And Testing Of Integrated Circuits Using High Performance Computing Machines, Matthew C. Markulik

Open Access Theses & Dissertations

As Moore's Law continues to hold true and transistor density becomes exponentially larger the need to rely on computer aided design (CAD) simulators has become more relevant and necessary. As we dive into the age of electronic reliance there presents a need to constantly improve methods to reduce time-to-solution for developing technologies. The reliance on CAD simulators for electronic development leaves engineers with an ability to improve the design process by improving these simulators or improving the methods in which these simulators are being utilized. With the advancement of quality fabrication processes and the ability to operate at sub-threshold levels …