Engineering Commons^™

Fabrication Of Mwcnt Based Gas Sensor Using Site-Selective Growth Of Nanotubes On Gold Patterned Silicon Oxide Substrate, Srikanth Durgamahanty

University of Kentucky Master's Theses

Growth confinement techniques for multi walled carbon nanotubes on Au/SiO₂ surfaces was studied and incorporated into a gas sensor design. A device framework was conceived and a sensor was built to achieve this structure. The fabrication results were analyzed using scanning electron microscopy which confirmed the achievement of highly site-selective growth of carbon nanotubes, exclusively between the interdigitated electrodes. The sensor was then evaluated for its capacitance and conductance response when exposed to NO₂ gas. Variation in sensitivities with frequency and flow rate were analyzed. A mathematical model was derived for such a device structure and the predictions …

Effect Of A Silicon Tip On Absorption Cross Section, Field Enhancement, And Localized Surface Plasmon Resonance Of Different Sized Gold Nanoparticles Under Evanescent Wave Illumination, Gazi Mostafa Huda

University of Kentucky Master's Theses

We have numerically investigated the influence of a nanoscale silicon tip in proximity to an illuminated gold nanoparticle. We describe how the position of the high-permittivity tip and the size of a nanoparticle impact the absorption, peak electric field and surface plasmon resonance wavelength under different illumination conditions. We detail the finite element method (FEM) approach we have used for this, whereby we specify a volume excitation field analytically and calculate the difference between this source field and the total field (i.e., scattered-field formulation). We show that a nanoscale tip can locally enhance the absorption of the particle as well …

Rotate And Hold And Scan (Rahas): Structured Light Illumination For Use In Remote Areas, Eli Ross Crane

University of Kentucky Master's Theses

As a critical step after the discovery of material culture in the field, archaeologists have a need to document these findings with a slew of different physical measurements and photographs from varying perspectives. 3-D imaging is becoming increasingly popular as the primary documenting method to replace the plethora of tests and measurements, but for remote areas 3-D becomes more cumbersome due to physical and environmental constraints. The difficulty of using a 3-D imaging system in such environments is drastically lessened while using the RAHAS technique, since it acquires scans untethered to a computer. The goal of this thesis is to …

Mathematical Modeling Of Clostridium Thermocellum’S Metabolic Responses To Environmental Perturbation, Bless Adotey

Theses and Dissertations--Biosystems and Agricultural Engineering

Clostridium thermocellum is a thermophilic anaerobe that is capable of producing ethanol directly from lignocellulosic compounds, however this organism suffers from low ethanol tolerance and low ethanol yields. In vivo mathematical modeling studies based on steady state traditional metabolic flux analysis, metabolic control analysis, transient and steady states’ flux spectrum analysis (FSA) were conducted on C. thermocellum’s central metabolism. The models were developed in Matrix Laboratory software ( MATLAB^® (The Language of Technical Computing), R2008b, Version 7.7.0.471)) based on known stoichiometry from C. thermocellum pathway and known physical constraints. Growth on cellobiose from Metabolic flux analysis (MFA) and Metabolic …

Viability Of A Controllable Chaotic Micromixer Through The Use Of Titanium-Nickel Shape Memory Alloy, David Ryan Lilly

Theses and Dissertations--Mechanical and Aerospace Engineering

Microfluidic devices have found applications in a number of areas, such as medical analysis, chemical synthesis, biological study, and drug delivery. Because of the small channel dimensions used in these systems, most microchannels exhibit laminar flow due to their low Reynold’s number, making mixing of fluids very challenging. Mixing at this size scale is diffusion-limited, so inducing chaotic flow patterns can increase the interface surface area between two fluids, thereby decreasing overall mixing time.

One method to create a chaotic flow within the channel is through the introduction of internal protrusions into the channel. In such an application protrusions that …

Hydro-Electric Generation System For The Dc House Project, Dennis Kwan, Mitchell Krug

Electrical Engineering

This paper focuses on the design, integration, and construction of a system that harnesses energy from flowing water. The system will be used in conjunction with the DC House Project. The proposed system employs a DC generator and DC-DC Boost-converter to provide electricity to the DC House at approximately 200-300W. Results of the testing and measurement show that the goal of the system is feasible, but currently limited. The generator could not output the specified power. Details of the design, along with ideas for further improvement, are presented in this report.

Audio-To-Optical Conversion And Transmission, Jason Moritz

Electrical Engineering

The purpose of this project is to understand free-space optical transmission of signals in the application of transmitting an audio signal. An audio signal will be taken from the headphone output of a computer and used to modulate a current source driving an LED and a laser diode. The optical signal will then be transmitted through free space as well as two different focal length lenses and converted back to an audio signal to measure any attenuation or gain in the original signal. My experimental results showed that the LED was able to transmit up to 10 dB more power …

Multicore, Multithreaded, Phase-Synchronous Fm Sound Synthesizer, Justin Tomlin

Electrical Engineering

This project implements a phase-synchronous FM synthesis algorithm in hardware.  Envelope and low frequency oscillator modulation of oscillator parameters is implemented.  The microcontroller the system is based on, the XMOS XS1-G4, allows for physical parallelism including features such as multiple cores, multiple hardware threads on each core, a hardware event-driven thread scheduler, and channel, channel ends, and link switches for thread and core communication.  The event-driven architecture of this device was ideal for implementing this synthesis algorithm.  The final product is portable, durable, has a simple, intuitive user interface, and allows for extensive spectral shaping capabilities.  The basic functional requirements …

10-Band Graphic Equalizer, Sean William Michel

Electrical Engineering

No abstract provided.

Optimal Loop Placement And Models For Length-Based Vehicle Classification And Stop-And-Go Traffic, Heng Wei, Qingyi Ai, Deogratias Eustace, Ping Yi

Civil and Environmental Engineering and Engineering Mechanics Faculty Publications

Inductive loops are widely used nationwide for traffic monitoring as a data source for a variety of needs in generating traffic information for operation and planning analysis, validations of travel demand models, freight studies, pavement design, and even emission impact analysis of traffic operation. The loop data have also been used for vehicle length-based classification in many states including Ohio. The dual-loop detector consists of two single loop detectors which are placed apart at a fixed short distance, and this configuration enables the dual-loop detector data a potential real-time data source for speed and vehicle classifications. However, the existing dual-loop …

A Sustainable Autonomic Architecture For Organically Reconfigurable Computing Systems, Rashad S. Oreifej

Electronic Theses and Dissertations

A Sustainable Autonomic Architecture for Organically Reconfigurable Computing System based on SRAM Field Programmable Gate Arrays (FPGAs) is proposed, modeled analytically, simulated, prototyped, and measured. Low-level organic elements are analyzed and designed to achieve novel self-monitoring, self-diagnosis, and self-repair organic properties. The prototype of a 2-D spatial gradient Sobel video edge-detection organic system use-case developed on a XC4VSX35 Xilinx Virtex-4 Video Starter Kit is presented. Experimental results demonstrate the applicability of the proposed architecture and provide the infrastructure to quantify the performance and overcome fault-handling limitations. Dynamic online autonomous functionality restoration after a malfunction or functionality shift due to changing …

Calibration Of Alumina-Epoxy Nanocomposites Using Piezospectroscopy For The Development Of Stress-Sensing Adhesives, Amanda L. Stevenson

Electronic Theses and Dissertations

A non-invasive method to quantify the stress distribution in polymer-based materials is presented through the piezospectroscopic calibration of alumina-epoxy nanocomposites. Three different alumina volume fraction nanocomposites were created and loaded under uniaxial compression in order to determine the relationship between applied stress and the frequency shift of the R-lines produced by alumina under excitation. Quantitative values for six piezospectroscopic coefficients were obtained which represent the stress-sensing property of the nanocomposites. The results were applied to an alumina-filled adhesive in a single lap shear configuration demonstrating the capability of the technique to monitor R-line peak positions with high spatial resolution and …

Innovative Pollutant Load Monitoring, Eric Gurr

Electronic Theses and Dissertations

Modern streamflow measuring equipment, water quality sampling techniques and a better understanding of pollutant washoff are continuously being developed as today's society is in critical need of improving water management, minimizing developmental impacts and preventing environmental hazards. In particular, the study of the spatial, temporal and volumetric characteristics of annual pollutant loading caused by variations in precipitation, land use and other anthropogenic factors is of great significance due to their relation to future global water demands. The research presented here falls in three parts. In the first part of the dissertation, an acoustical Doppler velocity profiler installed in a submerged …

Measurements In Air-Water Bubbly Flow Through A Vertical Narrow High-Aspect Ratio Channel, Benjamin R. Patrick

Electronic Theses and Dissertations

Two-Phase bubbly flows are encountered in a wide range of industrial applications, particularly where phase changes occur as seen in high performance heat exchangers and boiling reactors for power generation. These flows have been extensively studied in channels with circular geometries using air-water flows, though little data exists for flows through narrow rectangular channels. Measurements in thin geometries are particularly challenging since large bubbles bridge the gap, and it is difficult to compare point measurements with photographic techniques. The objective of this study is to explore the abilities of hot-film anemometry and high speed photography for taking measurements in a …

An Adaptive Modular Redundancy Technique To Self-Regulate Availability, Area, And Energy Consumption In Mission-Critical Applications, Rawad N. Al-Haddad

Electronic Theses and Dissertations

As reconfigurable devices' capacities and the complexity of applications that use them increase, the need for self-reliance of deployed systems becomes increasingly prominent. A Sustainable Modular Adaptive Redundancy Technique (SMART) composed of a dual-layered organic system is proposed, analyzed, implemented, and experimentally evaluated. SMART relies upon a variety of self-regulating properties to control availability, energy consumption, and area used, in dynamically-changing environments that require high degree of adaptation. The hardware layer is implemented on a Xilinx Virtex-4 Field Programmable Gate Array (FPGA) to provide self-repair using a novel approach called a Reconfigurable Adaptive Redundancy System (RARS). The software layer supervises …

Modeling And Characterization Of Acute Stress Under Dynamic Task Conditions, Angel M. Millan

Electronic Theses and Dissertations

Stress can be defined as the mental, physical, and emotional response of humans to stressors encountered in their personal or professional environment. Stressors are introduced in various activities, especially those found in dynamic task conditions when multiple task requirements must be performed. Stress and stressors have been described as activators and inhibitors of human performance. The ability to manage high levels of acute stress is an important determinant of successful performance in any occupation. In situations where performance is critical, personnel must be prepared to operate successfully under hostile or extreme stress conditions; therefore training programs and engineered systems must …

Design And Operation Of Stationary Distributed Battery Micro-Storage Systems, Ala R. Al-Haj Hussein

Electronic Theses and Dissertations

Due to some technical and environmental constraints, expanding the current electric power generation and transmission system is being challenged by even increasing the deployment of distributed renewable generation and storage systems. Energy storage can be used to store energy from utility during low-demand (off-peak) hours and deliver this energy back to the utility during high-demand (on-peak) hours. Furthermore, energy storage can be used with renewable sources to overcome some of their limitations such as their strong dependence on the weather conditions, which cannot be perfectly predicted, and their unmatched or out-of-synchronization generation peaks with the demand peaks. Generally, energy storage …

Investigation And Trade Study On Hot Carrier Reliability Of The Phemt For Dc And Rf Performance, Jason Steighner

Electronic Theses and Dissertations

A unified study on the hot carrier reliability of the Pseudomorphic High Electron Mobility Transistor (PHEMT) is carried out through Sentaurus Device Simulation, measurement, and physical analyses. A trade study of devices with four various geometries are evaluated for DC and RF performance. The trade-off of DC I-V characteristics, transconductance, and RF parameters versus hot carrier induced gate current is assessed for each device. Ambient temperature variation is also evaluated to observe its impact on hot carrier effects. A commercial grade PHEMT is then evaluated and measured to demonstrate the performance degradation that occurs after a period of operation in …

Feature Pruning For Action Recognition In Complex Environment, Adarsh Nagaraja

Electronic Theses and Dissertations

A significant number of action recognition research efforts use spatio-temporal interest point detectors for feature extraction. Although the extracted features provide useful information for recognizing actions, a significant number of them contain irrelevant motion and background clutter. In many cases, the extracted features are included as is in the classification pipeline, and sophisticated noise removal techniques are subsequently used to alleviate their effect on classification. We introduce a new action database, created from the Weizmann database, that reveals a significant weakness in systems based on popular cuboid descriptors. Experiments show that introducing complex backgrounds, stationary or dynamic, into the video …

Heat Transfer In A Coupled Impingement-Effusion Cooling System, Mark W. Miller

Electronic Theses and Dissertations

Gas turbine engines are prevalent in the today’s aviation and power generation industries. The majority of commercial aircraft use a turbofan gas turbine engines. Gas turbines used for power generation can achieve thermodynamic efficiencies as high as 60% when coupled with a steam turbine as part of a combined cycle. The success of gas turbines is a direct result of a half century’s development of the technology necessary to create such efficient, powerful, and reliable machines. One key area of technical advancement is the turbine cooling system. In short, increasing the turbine inlet temperature leads to a rise in cycle …

Ray Collection Bounding Volume Hierarchy, Kris Krishna Rivera

Electronic Theses and Dissertations

This thesis presents Ray Collection BVH, an improvement over a current day Ray Tracing acceleration structure to both build and perform the steps necessary to efficiently render dynamic scenes. Bounding Volume Hierarchy (BVH) is a commonly used acceleration structure, which aides in rendering complex scenes in 3D space using Ray Tracing by breaking the scene of triangles into a simple hierarchical structure. The algorithm this thesis explores was developed in an attempt at accelerating the process of both constructing this structure, and also using it to render these complex scenes more efficiently. The idea of using "ray collection" as a …

Techniques For Boosting The Performance In Content-Based Image Retrieval Systems, Ning Yu

Electronic Theses and Dissertations

Content-Based Image Retrieval has been an active research area for decades. In a CBIR system, one or more images are used as query to search for similar images. The similarity is measured on the low level features, such as color, shape, edge, texture. First, each image is processed and visual features are extract. Therefore each image becomes a point in the feature space. Then, if two images are close to each other in the feature space, they are considered similar. That is, the k nearest neighbors are considered the most similar images to the query image. In this K-Nearest Neighbor …

Modeling Human Group Behavior In Virtual Worlds, Fahad Shah

Electronic Theses and Dissertations

Virtual worlds and massively-multiplayer online games are rich sources of information about large-scale teams and groups, offering the tantalizing possibility of harvesting data about group formation, social networks, and network evolution. They provide new outlets for human social interaction that differ from both face-to-face interactions and non-physically-embodied social networking tools such as Facebook and Twitter. We aim to study group dynamics in these virtual worlds by collecting and analyzing public conversational patterns of users grouped in close physical proximity. To do this, we created a set of tools for monitoring, partitioning, and analyzing unstructured conversations between changing groups of participants …

Purge And Secondary Flow Interaction Control By Means Of Platform Circumferential Contouring, Melissa Harris

Electronic Theses and Dissertations

This study presents an attempt to reduce the losses produced by the purge flow in a turbine stage by incorporating circumferential platform contouring. Two contours are proposed and compared against a baseline at different levels of swirl. The computational simulations were performed using a RANS three-dimensional Computational Fluid Dynamics code with the Shear Stress Transport turbulence model. The results of steady simulations demonstrate that for the first contour, when the flow is swirled to 50% of the rim speed, the purge flow exits the cavity with less cross flow. This in turn reduces the strength of the passage vortex. However, …

An Improved Ocean Vector Winds Retrieval Approach Using C- And Ku-Band Scatterometer And Multi-Frequency Microwave Radiometer Measurements, Suleiman Odeh Alsweiss

Electronic Theses and Dissertations

This dissertation will specifically address the issue of improving the quality of satellite scatterometer retrieved ocean surface vector winds (OVW), especially in the presence of strong rain associated with tropical cyclones. A novel active/passive OVW retrieval algorithm is developed that corrects Ku-band scatterometer measurements for rain effects and then uses them to retrieve accurate OVW. The rain correction procedure makes use of independent information available from collocated multi-frequency passive microwave observations provided by a companion sensor and also from simultaneous C-band scatterometer measurements. The synergy of these active and passive measurements enables improved correction for rain effects, which enhances the …

Effective Task Transfer Through Indirect Encoding, Phillip Verbancsics

Electronic Theses and Dissertations

An important goal for machine learning is to transfer knowledge between tasks. For example, learning to play RoboCup Keepaway should contribute to learning the full game of RoboCup soccer. Often approaches to task transfer focus on transforming the original representation to fit the new task. Such representational transformations are necessary because the target task often requires new state information that was not included in the original representation. In RoboCup Keepaway, changing from the 3 vs. 2 variant of the task to 4 vs. 3 adds state information for each of the new players. In contrast, this dissertation explores the idea …

Viability Study Of A Residential Integrated Stormwater, Graywater, And Wastewater Treatment System At Florida's Showcase Green Envirohome, Matthew Allen Goolsby

Electronic Theses and Dissertations

The subject of water scarcity and the rate of water consumption has become popular topics over the last few decades. It is possible that society may consume or contaminate much of the remaining readily available water if there is not a paradigm shift. This deep rooted concern has prompted investigations to identify alternative water use and treatment methods. Within this report, information is presented from the use of innovative water harvesting and on-site sewage treatment and disposal systems (OSTDS) at Florida’s Showcase Green Envirohome (FSGE.net), while also addressing low impact development (LID) practices. FSGE is a residential home that demonstrates …

Nonlinear Estimation And Control For Assistive Robots, Zhao Wang

Electronic Theses and Dissertations

In this thesis, we document the progress in the estimation and control design of a smart assistive robot arm that can provide assistance during activities of daily living to the elderly and/or users with disabilities. Interaction with the environment is made challenging by the kinematic uncertainty in the robot, imperfect sensor calibration, limited view of angle as well as the fact that most activities of daily living are generally required to be performed in unstructured environments. For monocular visual systems, range (or depth) information is always crucial for target modeling and system control design. In the first part of my …

Resource Banking An Energy-Efficient, Run-Time Adaptive Processor Design Technique, Jacob Staples

Electronic Theses and Dissertations

From the earliest and simplest scalar computation engines to modern superscalar out-oforder processors, the evolution of computational machinery during the past century has largely been driven by a single goal: performance. In today’s world of cheap, billion-plus transistor count processors and with an exploding market in mobile computing, a design landscape has emerged where energy efficiency, arguably more than any other single metric, determines the viability of a processor for a given application. The historical emphasis on performance has left modern processors bloated and over provisioned for everyday tasks in the hope that during computationally intensive periods some performance improvement …

Imaging Long-Range Orientational Order In Monolayers Of Amphiphilic Molecules With Scanning Probe Force Microscope And Liquid Crystal Optical Amplification, Wenlang Liang

Electronic Theses and Dissertations

Monolayers of amphiphilic molecules at interface provide a unique system for understanding the thermodynamic and rheological properties of quasi two-dimensional systems. They are also an excellent model accessible for studying cell membranes. The feature of longrange organization of molecular tilt azimuth in monolayers at the air/water interface is one of the most interesting findings over the past two decades, which leads to the formation rich and defined textures. By observing the changes in these textures, the transitions between tilted monolayer phases can be detected. We study the boojum and stripe textures formed in the liquid-condensed phase of pentadecanoic acid (PDA) …