Open Access. Powered by Scholars. Published by Universities.®

Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

2011

Discipline
Institution
Keyword
Publication
Publication Type
File Type

Articles 451 - 480 of 5801

Full-Text Articles in Engineering

Influence Of Supraglottal Geometry And Modeling Choices On The Flow-Induced Vibration Of A Computational Vocal Fold Model, Timothy E. Shurtz Nov 2011

Influence Of Supraglottal Geometry And Modeling Choices On The Flow-Induced Vibration Of A Computational Vocal Fold Model, Timothy E. Shurtz

Theses and Dissertations

Computational models of the flow-induced vibrations of the vocal folds are powerful tools that can be used in conjunction with physical experiments to better understand voice production. This thesis research has been performed to contribute to the understanding of vocal fold dynamics as well as several aspects of computational modeling of the vocal folds. In particular, the effects of supraglottal geometry have been analyzed using a computational model of the vocal folds and laryngeal airway. In addition, three important computational modeling parameters (contact line location, Poisson's ratio, and symmetry assumptions) have been systematically varied to determine their influence on model …

Go to article

Preparation And Application Of Nano-Nio As Anode In Lithium-Ion Batteries, Cheng-Dong Bai, Jia-Jia Chen, Qi Zhang, Ming-Sen Zheng, Quan-Feng Dong Nov 2011

Preparation And Application Of Nano-Nio As Anode In Lithium-Ion Batteries, Cheng-Dong Bai, Jia-Jia Chen, Qi Zhang, Ming-Sen Zheng, Quan-Feng Dong

Journal of Electrochemistry

In this work, the nano-NiO material was prepared by hydrothermal method. The surface morphologies and electrochemical properties of nano-NiO material were investigated. The special nano-NiO material with porous surface assembling honeycombs(100-200nm) was obtained by using surface active agents. The discharge capacity of nano-NiO electrode up to 2385.7 mAh/g was achieved at current density of 0.1A/g in the first circle,while 1100mAh/g could be maintained after 100 circles. At current density of 2.0A/g, the discharge capacity of 600 mAh/g was obtained. And when the current density was reduced to 0.1A/g, the discharge capacity was restored to 1050 mAh/g. The nano-NiO electrode exhibited …

Go to article

Corrosion Behaviors Of 316 Stainless Steel Weldment Studied By Array Reference Electrodes, Wang-Huo Yang, Rong-Gang Hu, Chen-Qing Ye, Wei Hang, Ning Li, Chang-Jian Lin Nov 2011

Corrosion Behaviors Of 316 Stainless Steel Weldment Studied By Array Reference Electrodes, Wang-Huo Yang, Rong-Gang Hu, Chen-Qing Ye, Wei Hang, Ning Li, Chang-Jian Lin

Journal of Electrochemistry

The array reference electrodes were developed to in situ measure the potential distributions of the welded 316 stainless steel in 12% FeCl3 solution, combined with metallographic analysis, polarization curve, EIS measurement and Kelvin volta potential imaging. It was indicated that the weld zone of metal suffered a serious preferential corrosion when immersed in the environment due to the distinct changes of structure and composition during the welding process. With time prolonging, the corrosion potential of the welding zone was negatively shifted to a maximum value, and then declined gradually. At 45 min immersion, the corrosion development from welding zone to …

Go to article

Microemulsion Preparation And Electrochemical Characterization Of Pt/C, Ptir/C Electrocatalysts, Ya-Ping Zeng, Sheng Sui Nov 2011

Microemulsion Preparation And Electrochemical Characterization Of Pt/C, Ptir/C Electrocatalysts, Ya-Ping Zeng, Sheng Sui

Journal of Electrochemistry

The Pt/C electrocatalysts were prepared by three different systems and the PtIr/C electrocatalysts were prepared with four different Ir contents. The samples were characterized by X-ray diffraction (XRD), transmission electron microscope (TEM), cyclic voltammetry (CV), potentiostatic and potentiodynamic polarizations measurements. The experimental results confirmed that the electrocatalyst particles prepared by the microemulsion method were well distributed on XC-72R supports with the active particle sizes of 5～10nm and good electrocatalysts activity. The Pt85Ir15/C electrocatalysts showed the highest overall electrochemical activity in unitized regenerative fuel cell.

Go to article

Dynamics And Stability Of Two-Potential Flows In The Porous Media, Bojan Markicevic, Branko Bijeljic, Homayun K. Navaz Nov 2011

Dynamics And Stability Of Two-Potential Flows In The Porous Media, Bojan Markicevic, Branko Bijeljic, Homayun K. Navaz

Mechanical Engineering Publications

The experimental and numerical results of the capillary-force-driven climb of wetting liquid in porous media, which is opposed by the gravity force, are analyzed with respect to the emergence of a multiphase flow front and flow stability of the climbing liquid. Two dynamic characteristics are used: (i) the multiphase flow front thickness as a function of time, and (ii) the capillary number as a function of Bond number, where both numbers are calculated from the harmonic average of pores radii. Throughout the climb, the influence of capillary, gravity, and viscous force variations on the flow behavior is investigated for different …

Go to article

Wim Based Load Models For Bridge Serviceability Limit States, Przemyslaw Rakoczy Nov 2011

Wim Based Load Models For Bridge Serviceability Limit States, Przemyslaw Rakoczy

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

The safety of aging bridge inventory is one of the main concerns of the state and federal agencies. Therefore, there is a need to quantify the safety margin of existing infrastructure and new design bridges. The Serviceability Limit States, i.e. fatigue, requires additional statistical parameters and not only the maximum values but also load spectra, i.e. frequency of occurrence of loads. The maximum values are needed for shorter time periods, such as day, week, month or year. Load spectra as well as material resistance are random variables. To quantify the safety margin of existing and future bridges load and resistance …

Go to article

Improved Stereo Vision Methods For Fpga-Based Computing Platforms, Wade S. Fife Nov 2011

Improved Stereo Vision Methods For Fpga-Based Computing Platforms, Wade S. Fife

Theses and Dissertations

Stereo vision is a very useful, yet challenging technology for a wide variety of applications. One of the greatest challenges is meeting the computational demands of stereo vision applications that require real-time performance. The FPGA (Field Programmable Gate Array) is a readily-available technology that allows many stereo vision methods to be implemented while meeting the strict real-time performance requirements of some applications. Some of the best results have been obtained using non-parametric stereo correlation methods, such as the rank and census transform. Yet relatively little work has been done to study these methods or to propose new algorithms based on …

Go to article

Efficient Traffic Crash And Snow Complaint Gis System, Anthony B. Ngo Nov 2011

Efficient Traffic Crash And Snow Complaint Gis System, Anthony B. Ngo

School of Computing: Dissertations, Theses, and Student Research

We describe the design and implementation of a traffic crash and snow complaint GIS system developed for the Lincoln Public Works department. We also describe a novel geocoding algorithm that was used to move data from the older Criminal Justice Information System, which is a relational database, to the new GIS system. In addition, we describe the implementation of several indexing algorithms that enable the system to efficiently answer rectangular range queries and queries about the relative locations of moving objects. Finally, in many applications (on-line analysis or mobile GIS), we need to execute spatial query efficiently (fast and small), …

Go to article

Preparation And Characterization Of Casno3 Anode Material For Lithium Ion Batteries, Ran Sun, Zi-Geng Liu, Ya-Qi Jiang Nov 2011

Preparation And Characterization Of Casno3 Anode Material For Lithium Ion Batteries, Ran Sun, Zi-Geng Liu, Ya-Qi Jiang

Journal of Electrochemistry

In this study the precursor CaSn(OH)6 was prepared via a hydrothermal process, and its composition, surface feature and phase-transition were characterized by XRD, SEM and DSC-TGA. The shapes of CaSn(OH)6 crystals were effectively controlled by adjusting the volumn ratio of H2O and CH3CH2OH solvents. Perovskite CaSnO3 could be obtained by calcination of CaSn(OH)6 at 800 ℃. The reversible capacity of 334.4 mAh/g with good cycling stability could be achieved with the CaSnO3 electrode.

Go to article

Preparation And Characterization Of The Lani0.6Fe0.4O3-δ Cathode For Intermediate Temperature Solid Oxide Fuel Cell, Hang Liu, Bo Huang, Xin-Jian Zhu Nov 2011

Preparation And Characterization Of The Lani0.6Fe0.4O3-δ Cathode For Intermediate Temperature Solid Oxide Fuel Cell, Hang Liu, Bo Huang, Xin-Jian Zhu

Journal of Electrochemistry

The LaNi0.6Fe0.4O3-δ as cathode material for intermediate temperature solid oxide fuel cell was prepared using a combustion synthesis technique. The X-ray diffraction (XRD) pattern showed that the single-phase LaNi0.6Fe0.4O3-δ perovskite could be obtained after heat treatment at 600°C. The TEM and SEM images of the synthesized powders revealed that the grains were 50-100nm. According to the electrochemical impedance spectra (EIS), the polarization resistance of the symmetric cell LaNi0.6Fe0.4O3-δ/ScSZ/LaNi0.6Fe0.4O3-δ sintered at 1050°C was the smallest (0.70Ω·cm2, 0.27Ω·cm2 …

Go to article

Preparation And Application Of Macroporous Ato/Sio2 Electrode In Electrochemical Degradation Of 4-Chlorophenol, Zhang-Lin Chai, Rui-Feng Zhang, Tong-Hu Xiao, Yun-Xiao Liang Nov 2011

Preparation And Application Of Macroporous Ato/Sio2 Electrode In Electrochemical Degradation Of 4-Chlorophenol, Zhang-Lin Chai, Rui-Feng Zhang, Tong-Hu Xiao, Yun-Xiao Liang

Journal of Electrochemistry

The macroporous ATO/SiO2 materials were prepared through multiple steps of hydrolysis deposition in ethylene glycol and acetonitrile mixed solutions of SnCl2/SbCl3 and subsequent calcination at high temperature. The structures of the obtained materials were characterized by means of SEM and XRD. The results showed that the nano-ATO chemically deposited on the SiO2 support underwent well-controlled aggregation and recrystallization to form a sandwich structure (ATO-SiO2-ATO). Through four times loading of ATO the volume resistivity and the specific surface area reached 10·cm and 77 m2·g-1, respectively. The oxygen evolution potential on …

Go to article

Dynamic Modeling And Characteristic Analysis Of Proton Exchange Membrane Fuel Cell, Qiu-Hong Jia, Ming Han, Bin Deng, Cai-Zhi Zhang Nov 2011

Dynamic Modeling And Characteristic Analysis Of Proton Exchange Membrane Fuel Cell, Qiu-Hong Jia, Ming Han, Bin Deng, Cai-Zhi Zhang

Journal of Electrochemistry

In this paper, a dynamic model of PEMFC is developed to estimate the dynamic performance of PEMFC by analyzing in detail the influence factors of voltage of PEMFC including various losses. The partial pressure of hydrogen and oxygen is obtained using the differential form of the ideal-gas equation in this model. The steady-state model is obtained by setting reasonable parameter values. The simulation results and experimental results have good consistency, which shows that the simulation model is correct, reasonable and effective. It analyzed the dynamic response characteristics of the output voltage and the partial pressure of hydrogen in condition of …

Go to article

Preparation And Capacitance Characteristics Of Nickel Oxide Electrode With Mesh-Like Structure, Hui Xu, Zhen-Jun Peng, Dong-Hong Guo, Jun-Ling Li Nov 2011

Preparation And Capacitance Characteristics Of Nickel Oxide Electrode With Mesh-Like Structure, Hui Xu, Zhen-Jun Peng, Dong-Hong Guo, Jun-Ling Li

Journal of Electrochemistry

The mesh-like structure of NiO electrode was obtained by first preparing the precursors via hydrothermal process using nickel sulfate and carbamide as reactants, sodium hexametaphosphate as a surfactant, and followed by calcination of the precursors at 400 ℃. The structure, morphology and capacitance characteristics of NiO electrode were characterized by XRD, SEM and constant current charge-discharge testing techniques. The effects of hydrothermal temperatures on the electrochemical properties of NiO electrode were investigated. The results showed that the better property of nickel oxide was obtained when the mole ratio of nickel to urea was 1:4 and the hydrothermal temperature was 140℃. …

Go to article

Using Commodity Flow Data For Predicting Truck Freight Flow On State Truck Routes, Goangsung Jin Nov 2011

Using Commodity Flow Data For Predicting Truck Freight Flow On State Truck Routes, Goangsung Jin

Theses and Dissertations

The increase in truck traffic on highways has brought many problems and challenges to transportation planning and traffic operation, including traffic congestion, transportation system deficiency (insufficient truck parking, etc.), safety, infrastructure deterioration, environmental impacts (air quality and noise), economic development, and so forth. Along with the increase in truck traffic, the need for developing a statewide truck freight demand model has grown so that a state can estimate truck traffic at any point on its highways. The most significant hurdle to including freight transportation in the transportation modeling process is that most of the demand forecasting methodologies currently available were …

Go to article

A Brief Review Of Research Progress In The Development Of Engineering Models For Lithium Ion Batteries, Da-Wei Wang, Dong-Jiang Li, Jun Li, Yong Yang Nov 2011

A Brief Review Of Research Progress In The Development Of Engineering Models For Lithium Ion Batteries, Da-Wei Wang, Dong-Jiang Li, Jun Li, Yong Yang

Journal of Electrochemistry

Lithium ion battery has become an important and popular electrochemical device for energy storage.Suitable evaluation and understanding of electrochemical performance and state of charge play a key role in the applications of lithium ion batteries.Construction and utilization of engineering modeling for lithium ion batteries is an effective way to fulfill this target.In this paper,engineering models of lithium ion batteries based on electrochemical reaction,ionic diffusion and migration are introduced.The emphasis is placed on the development of engineering models by the introduction of side reaction,phase transition,stress and energy.The applications of engineering models in such simulations as charge-discharge,concentration distribution,current distribution,state of charge,stress and …

Go to article

Brief Introduction Of Organic Electrochemistry, Huan Wang, Jia-Xing Lu Nov 2011

Brief Introduction Of Organic Electrochemistry, Huan Wang, Jia-Xing Lu

Journal of Electrochemistry

Organic electrochemistry is a very useful tool for organic synthesis, not only because of the selective introduction or removal of electrons from organic molecules, but also for its green process. In this paper, electroorganic synthesis has been introduced from the systems, research methods and technologies to the characterization. Most of organic compounds could be electrochemically oxidized or reduced. Here, taking C=C compounds as an example, several kinds of electrochemical organic synthesis reactions are discussed, such as electrochemical addition, electrocatalytic dimrization, electropolymerization, etc. Electroorganic synthesis has been industrialized since 1960s. In this paper, electrosynthesis of adiponitrile was used as an example …

Go to article

Superhydrophilic/Superhydrophobic Surface Constructions On Titanium And Their Effects On Anti-Bacterial Properties, Guo-Wei Wang, Qiao-Ling Huang, Ren Hu, Chang-Jian Lin, Hao Wang, Li-Hai Zhang, Pei-Fu Tang Nov 2011

Superhydrophilic/Superhydrophobic Surface Constructions On Titanium And Their Effects On Anti-Bacterial Properties, Guo-Wei Wang, Qiao-Ling Huang, Ren Hu, Chang-Jian Lin, Hao Wang, Li-Hai Zhang, Pei-Fu Tang

Journal of Electrochemistry

The microbial infection of biomaterials often causes clinic problems and sometimes even leads to the prosthesis failure. It is, therefore, important to prevent the biomaterials from bacterial contamination. This can be done by using anti-bacteria drugs. However, this method causes physiological burdens to the patients and does not always work. To stop the contamination from the just beginning is believed to be a better choice. The first step for infection is the attachment of bacteria on the material. In this work, the thin TiO2 nanotubes array films were constructed with totally different wettabilities showing either superhydrophobic or superhydrophilic. The …

Go to article

The Electrochemical Properties Of Cathode Materials LimXV3-XO8, Hui Yang, Gang-Gang Zhao, Juan Li Nov 2011

The Electrochemical Properties Of Cathode Materials LimXV3-XO8, Hui Yang, Gang-Gang Zhao, Juan Li

Journal of Electrochemistry

The cathode material of LiMxV3-xO8 was fabricated by sol-gel method using citric acid as a chelating agent and doping transition metal ions M (Mn, Ti, Co and Ni). The structure, morphology and electrochemical proprieties of the LiMxV3-xO8 samples were investigated by XRD, TGA/DTA, SEM, charge-discharge and CV measurements. The results showed that different calcining temperatures result in different structures and morphologies, which lead to different discharge capacities. The specific discharge capacity of the sample calcined at 500℃ for 6 h was up to 300.4 mAh/g in the first cycle, and the capacity decreased with the …

Go to article

Electrocatalytic Determination Of 15 Kinds Of Phenolic Compounds By Novel Gold Nanoparticles-Modified Glassy Carbon Electrode, Yan-Ping Cui, Wei-Xing Wang, Chang-Zhu Yang, Wen-Hong Pu Nov 2011

Electrocatalytic Determination Of 15 Kinds Of Phenolic Compounds By Novel Gold Nanoparticles-Modified Glassy Carbon Electrode, Yan-Ping Cui, Wei-Xing Wang, Chang-Zhu Yang, Wen-Hong Pu

Journal of Electrochemistry

A gold nanoparticles modified glassy carbon electrode (Au/GCE) was used to detect 15 kinds of phenolic compounds. In the cyclic voltammetry measurements, the peak currents of phenolic compounds at Au/GCE were all increased as compared with GCE and planar gold electrodes, and the oxidation potentials were determined by the activity of analytes. Besides, electrocatalysis of salicylic acid was studied at Au/GCE. The results showed that, there was a good linear relationship between the oxidation current and the concentration of salicylic acid, and the current sensitivity was 1.8 fold higher than that obtained on GCE. Trace phenolic compounds determination could be …

Go to article

Electrochemical Properties Of Tungstogermanate And Electrocatalysis Of H2O2 On Gew11Co/P-Opd/Gc Electrode, Li-Li Zhu, Jian-Ying Qu, Jue Wang, Hao-Yue Feng Nov 2011

Electrochemical Properties Of Tungstogermanate And Electrocatalysis Of H2O2 On Gew11Co/P-Opd/Gc Electrode, Li-Li Zhu, Jian-Ying Qu, Jue Wang, Hao-Yue Feng

Journal of Electrochemistry

The electrochemical properties of Co-substituted trimeric tungstogermanate containing Keggin fragments were studied. Cyclic voltammograms revealed two couples of reversible redox peaks on glassy carbon (GC) electrode in acid solutions. They corresponded to two-electron reductions accompanying by the additions of four protons and three protons, respectively, both were controlled by adsorption. The differences in the peak potentials of 2-electron-4-proton and 2-electron-3-proton reactions were 31 mV and 35 mV, respectively..Furthermore, the tungstogermanate (GeW11Co) modified GC electrode with functionalization by poly(o-phenylenediamine) (P-oPD) was prepared readily by electropolymerization. The GeW11Co/P-oPD/GC electrode could electrocatalyze the reduction of hydrogen peroxide, which showed good stability and quick …

Go to article

Electrochemical Studies On Surface Inclusion Of Β-Cyclodextrin With Adriamycin, Jian Shi, Qi-Ping Zhang, Nan-Ping Wang Nov 2011

Electrochemical Studies On Surface Inclusion Of Β-Cyclodextrin With Adriamycin, Jian Shi, Qi-Ping Zhang, Nan-Ping Wang

Journal of Electrochemistry

The β-cyclodextrin (β-CD) modified gold electrode (β-CD/Au) was fabricated to study the electrochemical behavior of adriamycin (ADM). The results indicated that the complexing reaction of ADM with β-CD took place at the β-CD/Au surface. At 25 °C, the complexing constant (K) was 9.54×104 L·mol-1 in pH=7.0. The K values changed regularly with temperature, and the most suitable temperature of the surface inclusion reaction was 30 ℃. The complexing reaction of ADM with β-CD at the β-CD/Au surface could undergo the quasi-reversible electrochemical reaction with the rate constant being 0.0995 s-1. The cathodic peak current (Ip) of …

Go to article

Indirect Electrochemical Reduction And Cotton Dyeing Process In Fe(Ⅲ)-Oxalate-Calcium Gluconate System, Qing-Zhi Wang, Wei Wang Nov 2011

Indirect Electrochemical Reduction And Cotton Dyeing Process In Fe(Ⅲ)-Oxalate-Calcium Gluconate System, Qing-Zhi Wang, Wei Wang

Journal of Electrochemistry

The electrochemical behavior and possible reaction mechanism in Fe(Ⅲ)-oxalate-calcium gluconate system were studied by cyclic voltammetry. The results showed that Fe(Ⅱ)-gluconate was the final reductant. The reduction time, the working voltage and the cathode area influenced the current efficiency. The high current efficiency of 89% for the indirect electrochemical reduction of Vat Scarlet R could be achieved with reduction time of 10 min, working voltage of 4 V and cathode area of 40 cm2 in Fe(Ⅲ)-oxalate-calcium gluconate system.

Go to article

Electrochemical Behaviors Of Hydroquinone On Polypyrrole/Stab-Nammt/Gc Electrode, Rong Li, Jian Xiong, Wei-Qiong Zhu, Yuan-Yuan Han, Jin Xu, Xiao-Ying He Nov 2011

Electrochemical Behaviors Of Hydroquinone On Polypyrrole/Stab-Nammt/Gc Electrode, Rong Li, Jian Xiong, Wei-Qiong Zhu, Yuan-Yuan Han, Jin Xu, Xiao-Ying He

Journal of Electrochemistry

The PPy/STAB-MMT/GC electrode was made using montmorillonite modified by STAB and polypyrrole (PPy). The electrochemical behaviors of hydroquinone on the PPy/STAB-MMT/GC electrode were researched by cyclic voltammetry and square wave stripping voltammetry (SWSV). The results showed that the electrode reaction occurred on the hydroquinone electrode was controlled by diffusion in PBS (pH=6.0). The number of electron transfer was equal to the number of protons (n=m=1) with the effective area of PPy/STAB-MMT/GC electrode Aeff=0.031 cm2. Under the optimized conditions, the linear response of peak current in SWSV with the concentration of hydroquinone in a range of 8.0×10-6~8.0×10 …

Go to article

Molecular Diffusion And Slip Boundary Conditions At Smooth Surfaces With Periodic And Random Nanoscale Textures, Nikolai V. Priezjev Nov 2011

Molecular Diffusion And Slip Boundary Conditions At Smooth Surfaces With Periodic And Random Nanoscale Textures, Nikolai V. Priezjev

Mechanical and Materials Engineering Faculty Publications

The influence of periodic and random surface textures on the flow structure and effective slip length in Newtonian fluids is investigated by molecular dynamics (MD) simulations. We consider a situation where the typical pattern size is smaller than the channel height and the local boundary conditions at wetting and nonwetting regions are characterized by finite slip lengths. In case of anisotropic patterns, transverse flow profiles are reported for flows over alternating stripes of different wettability when the shear flow direction is misaligned with respect to the stripe orientation. The angular dependence of the effective slip length obtained from MD simulations …

Go to article

Electronic Monitoring Of Hand Hygiene Compliance In An Inpatient Hospital Setting, Christopher M. Masek Nov 2011

Electronic Monitoring Of Hand Hygiene Compliance In An Inpatient Hospital Setting, Christopher M. Masek

Department of Industrial and Management Systems Engineering: Dissertations, Theses, and Student Research

Proper hand hygiene is known to reduce hospital acquired infections. Currently the most widely accepted method used to measure hand hygiene compliance is through direct observation. This method often provides data that may not accurately represent true hand hygiene compliance due to such factors such as the Hawthorne Effect. Perhaps a better approach is to use counting devices to capture hand hygiene opportunities and activities. This thesis focuses on the measurement of hand hygiene activities of all individuals that either work or visit an inpatient medical ward including healthcare workers, patients and visitors at the patient’s bedside for non-isolation patients. …

Go to article

Directed Evolution Of Adeno-Associated Virus For Enhanced Gene Delivery And Gene Targeting In Human Pluripotent Stem Cells, Prashanth Asuri, Melissa Bartel, Tandis Vazin, Jae-Hyung Jang, Tiffany Wong, David Schaffer Nov 2011

Directed Evolution Of Adeno-Associated Virus For Enhanced Gene Delivery And Gene Targeting In Human Pluripotent Stem Cells, Prashanth Asuri, Melissa Bartel, Tandis Vazin, Jae-Hyung Jang, Tiffany Wong, David Schaffer

Bioengineering

Efficient approaches for the precise genetic engineering of human pluripotent stem cells (hPSCs) can enhance both basic and applied stem cell research. Adenoassociated virus (AAV) vectors are of particular interest for their capacity to mediate efficient gene delivery to and gene targeting in various cells. However, natural AAV serotypes offer only modest transduction of human embryonic and induced pluripotent stem cells (hESCs and hiPSCs), which limits their utility for efficiently manipulating the hPSC genome. Directed evolution is a powerful means to generate viral vectors with novel capabilities, and we have applied this approach to create a novel AAV variant with …

Go to article

Ceas E-News 11.22.2011, College Of Engineering And Applied Sciences Nov 2011

Ceas E-News 11.22.2011, College Of Engineering And Applied Sciences

College of Engineering and Applied Sciences News

Stryker Challenge Team Win, Student Team and Alumni Accelerate Michigan Win, ProModel Team Win, Workshop, Roundtable, SWE Event, Make a Difference

Go to article

A Time-Efficient Method For Accurate T1 Mapping Of The Human Brain, Yung-Yeh Chang Nov 2011

A Time-Efficient Method For Accurate T1 Mapping Of The Human Brain, Yung-Yeh Chang

Theses and Dissertations

The signal resulting from the IR-FSE sequence has been thoroughly analyzed in order to improve the accuracy of quantitative T1 mapping of the human brain. Several optimized post-processing algorithms have been studied and compared in terms of their T1 mapping accuracy. The modified multipoint two-parameter fitting method was found to produce less underestimation compared to the traditional multipoint three-parameter fitting method, and therefore, to result in a smaller T1 estimation error. Two correction methods were proposed to reduce the underestimation problem which is commonly seen in IR-FSE sequences used for measuring T1, especially when a large turbo factor is used. …

Go to article

One-Step Infiltration Of Mixed Conducting Electrocatalysts For Reducing Cathode Polarization Of A Commercial Cathode-Supported Sofc, Nansheng Xu, Xue Li, Xuan Zhao, Hailei Zhao, Kevin Huang Nov 2011

One-Step Infiltration Of Mixed Conducting Electrocatalysts For Reducing Cathode Polarization Of A Commercial Cathode-Supported Sofc, Nansheng Xu, Xue Li, Xuan Zhao, Hailei Zhao, Kevin Huang

Faculty Publications

Infiltrating fine-grained electrocatalyst particles of either ion conducting or mixed electron and ion conducting (MEIC) material into a ceramic porous electrode scaffold has proven a very effective way to improve electrode performance for low to intermediate temperature solid oxide fuel cells (SOFCs). We report here one-step infiltration of MEIC fine particles, La0.6Sr0.4CoO3-δ (LSCo) and SrCo0.8Fe0.2O3-δ (SCF), into a commercial cathode substrate. A comparative study shows that the cathode polarization can be considerably reduced by a factor of 17 to 28 and 28 to 49 from 1000 to 700 ³C by …

Go to article

Power Control And Security Games For Wireless Communication Networks, Bo Liang Nov 2011

Power Control And Security Games For Wireless Communication Networks, Bo Liang

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

In this thesis, game theoretic analysis of wireless communication networks has been performed. Game theory provides valuable tools can be used to solve problem of conflict and cooperation in wireless communication networks. Game theoretic tools can be applied to multiple layers of wireless networks. First, we consider power control issues at the physical layer of wireless networks. A game theoretic analysis for resource allocation policies in fading interference channels in the presence of quality of service (QoS) constraints is performed. We model a two player non-cooperative power control game and assume that both transmitters and receivers know the channel side …

Go to article

First Prev Next Last