Engineering Commons^™

Scalability Of Incompressible Flow Computations On Multi-Gpu Clusters Using Dual-Level And Tri-Level Parallelism, Dana A. Jacobsen, Inanc Senocak

Mechanical and Biomedical Engineering Faculty Publications and Presentations

High performance computing using graphics processing units (GPUs) is gaining popularity in the scientific computing field, with many large compute clusters being augmented with multiple GPUs in each node. We investigate hybrid tri-level (MPI-OpenMP-CUDA) parallel implementations to explore the efficiency and scalability of incompressible flow computations on GPU clusters up to 128 GPUS. This work details some of the unique issues faced when merging fine-grain parallelism on the GPU using CUDA with coarse-grain parallelism using OpenMP for intra-node and MPI for inter-node communication. Comparisons between the tri-level MPI-OpenMP-CUDA and dual-level MPI-CUDA implementations are shown using computationally large computational fluid dynamics …

Robust Region Tracking In Multi-Agent Systems Utilizing Sliding Mode Control: Theory And Applications, Mark Bacon

Master's Theses

This thesis presents a methodology to bring controlled agents within a moving region despite agent interaction dynamics, uncertain forces and parameter variation. The logic is derived from traditional Sliding Mode Control theory with an expanded boundary layer which allows position deviation from the region center to specified bounds. As an example of the utility of this control, multiple methods of herding (controlling passive agents by appropriate positioning of controlled agents) are presented.

Self-Stratifying Automotive Topcoat Compositions And Processes, Jamil Baghdachi, Heidi Rosalia Perez Hernandez, Cynthia Gazepis Templeman

Patents

A process for preparing a coating composition includes contacting a polyol, a silsesquioxane, a polyurethane dendrimer, and a crosslinker, wherein the polyol, the silsesquioxane, the polyurethane dendrimer, and the crosslinker are dispersed within a solvent and forming a self-stratifying coating. Further, a coating composition includes a polyol, a silsesquioxane, a polyurethane dendrimer and a crosslinker forming a mixture dispersed within a solvent

Gis-Based Irrigation District Flow Routing/Scheduling, Charles M. Burt, Beau Freeman

BioResource and Agricultural Engineering

In 2007, the Irrigation Training and Research Center (ITRC) at California Polytechnic State University, San Luis Obispo undertook to develop a prototype of an intelligent and scalable real-time GIS-based water scheduling and routing software system for irrigation districts, capable of integrating multiple data sources into an information access and management facility featuring collaborative tools with automatic reasoning and analytical capabilities. Improving the infrastructure and management capabilities of irrigation districts in order to provide flexible delivery schedules and increase participation in peak demand reduction programs has been identified as having a significant potential to achieve energy conservation and resource efficiencies.

The …

Canal Lining, Charles M. Burt

BioResource and Agricultural Engineering

Larry and I thought that some musings about canal lining might be of some interest for some of you USCID newsletter readers. As you know, there are many canal lining techniques – especially if one considers the wide assortment of internationally used lining methods.

A Financial Impact Assessment Of Ld 1725: Stream Crossings, New England Environmental Finance Center, Muskie School Of Public Service

Water

This report looks at the potential financial impact of LD 1725 on the estimated 30,000 stream crossings in the State of Maine that would be affected by the law. Our research for this report included the analysis of nearly 2000 stream crossings and the data collection necessary for the development of extensive stream crossing replacement cost models. We found that the 1.2 bankfull requirements in LD 1725 would result in a 75% ‐ 250% increase in structure widths for stream crossing projects across the state. An upsize of this magnitude would increase the cost of replacing stream crossings statewide by …

2011-2012 Che Newsletter, Department Of Chemical Engineering, Michigan Technological University

Department of Chemical Engineering Newsletters

Table of Contents

• Department
• Bioengineering Research
• Student News
• Alumni and Friends

Structure And Properties Of Graphene Nano Disks (Gnd) With And Without Edge-Dopants, Pubodee Ratana-Arsanarom

Dissertations, Master's Theses and Master's Reports - Open

Graphene is one of the most important materials. In this research, the structures and properties of graphene nano disks (GND) with a concentric shape were investigated by Density Functional Theory (DFT) calculations, in which the most effective DFT methods - B3lyp and Pw91pw91 were employed.

It was found that there are two types of edges - Zigzag and Armchair in concentric graphene nano disks (GND). The bond length between armchair-edge carbons is much shorter than that between zigzag-edge carbons. For C24 GND that consists of 24 carbon atoms, only armchair edge with 12 atoms is formed. For a GND larger …

Investigation Of Using Waste Engine Oil Blended With Reclaimed Asphalt Materials To Improve Pavement Recyclability , Christopher Daniel Dedene

Dissertations, Master's Theses and Master's Reports - Open

With the increasing importance of conserving natural resources and moving toward sustainable practices, the aging transportation infrastructure can benefit from these ideas by improving their existing recycling practices. When an asphalt pavement needs to be replaced, the existing pavement is removed and ground up. This ground material, known as reclaimed asphalt pavement (RAP), is then added into new asphalt roads. However, since RAP was exposed to years of ultraviolet degradation and environmental weathering, the material has aged and cannot be used as a direct substitute for aggregate and binder in new asphalt pavements. One material that holds potential for restoring …

Orbits Design For Leo Space Based Solar Power Satellite System, Neelima Krishna Murthy Addanki

Dissertations, Master's Theses and Master's Reports - Open

Space Based Solar Power satellites use solar arrays to generate clean, green, and renewable electricity in space and transmit it to earth via microwave, radiowave or laser beams to corresponding receivers (ground stations). These traditionally are large structures orbiting around earth at the geo-synchronous altitude.

This thesis introduces a new architecture for a Space Based Solar Power satellite constellation. The proposed concept reduces the high cost involved in the construction of the space satellite and in the multiple launches to the geo-synchronous altitude. The proposed concept is a constellation of Low Earth Orbit satellites that are smaller in size than …

Effect Of High Order Interpolation In The Stability And Efficiency Of The Time-Integration Process In Vorticity-Velocity Cfd Algorithms, Pankaj A. Jagadale

Dissertations, Master's Theses and Master's Reports - Open

The numerical solution of the incompressible Navier-Stokes Equations offers an effective alternative to the experimental analysis of Fluid-Structure interaction i.e. dynamical coupling between a fluid and a solid which otherwise is very complex, time consuming and very expensive. To have a method which can accurately model these types of mechanical systems by numerical solutions becomes a great option, since these advantages are even more obvious when considering huge structures like bridges, high rise buildings, or even wind turbine blades with diameters as large as 200 meters. The modeling of such processes, however, involves complex multiphysics problems along with complex geometries. …

Muffler Characterization With Implementation Of The Finite Element Method And Experimental Techniques, Tyler W. Le Roy

Dissertations, Master's Theses and Master's Reports - Open

Determining how an exhaust system will perform acoustically before a prototype muffler is built can save the designer both a substantial amount of time and resources. In order to effectively use the simulation tools available it is important to understand what is the most effective tool for the intended purpose of analysis as well as how typical elements in an exhaust system affect muffler performance. An in-depth look at the available tools and their most beneficial uses are presented in this thesis. A full parametric study was conducted using the FEM method for typical muffler elements which was also correlated …

Comprehensive Review And Application Of Particle Image Velocimetry, Michael P. Norconk

Dissertations, Master's Theses and Master's Reports - Open

For a fluid dynamics experimental flow measurement technique, particle image velocimetry (PIV) provides significant advantages over other measurement techniques in its field. In contrast to temperature and pressure based probe measurements or other laser diagnostic techniques including laser Doppler velocimetry (LDV) and phase Doppler particle analysis (PDPA), PIV is unique due to its whole field measurement capability, non-intrusive nature, and ability to collect a vast amount of experimental data in a short time frame providing both quantitative and qualitative insight. These properties make PIV a desirable measurement technique for studies encompassing a broad range of fluid dynamics applications. However, as …

Diesel Spray Mixing Limited Vaporization With Non-Ideal And Multi-Component Fuel Thermophysical Property Effects, Jaclyn Elyse Nesbitt

Dissertations, Master's Theses and Master's Reports - Open

Internal combustion engines are, and will continue to be, a primary mode of power generation for ground transportation. Challenges exist in meeting fuel consumption regulations and emission standards while upholding performance, as fuel prices rise, and resource depletion and environmental impacts are of increasing concern. Diesel engines are advantageous due to their inherent efficiency advantage over spark ignition engines; however, their NO_x and soot emissions can be difficult to control and reduce due to an inherent tradeoff. Diesel combustion is spray and mixing controlled providing an intrinsic link between spray and emissions, motivating detailed, fundamental studies on spray, vaporization, …

Hydrologic Analysis Of A Limestone Quarry Using Epa's Help Version 3.08 Model , Scott R. Bauer

Dissertations, Master's Theses and Master's Reports - Open

Aggregates were historically a low cost commodity but with communities and governmental agencies reducing the amount of mining the cost is increasing dramatically. An awareness needs to be brought to communities that aggregate production is necessary for ensuring the existing infrastructure in today’s world. This can be accomplished using proven technologies in other areas and applying them to show how viable reclamation is feasible.

A proposed mine reclamation, Douglas Township quarry (DTQ), in Dakota Township, MN was evaluated using Visual Hydrologic Evaluation of Landfill Performance (HELP) model. The HELP is commonly employed for estimating the water budget of a landfill, …

Study Of Water Use And Supply In The District Of Independencia, Peru, Fletcher A. Mckenzie

Dissertations, Master's Theses and Master's Reports - Open

Peru is a developing country with abundant fresh water resources, yet the lack of infrastructure leaves much of the population without access to safe water for domestic uses. The author of this report was a Peace Corps Volunteer in the sector of water & sanitation in the district of Independencia, Ica, Peru. Independencia is located in the arid coastal region of the country, receiving on average 15 mm of rain annually. The water source for this district comes from the Pisco River, originating in the Andean highlands and outflowing into the Pacific Ocean near the town of Pisco, Peru.

The …

A Study On The Feasibility Of Universal Chip Control In Machining, Thimmaiah Kumbera Ganapathi

Dissertations, Master's Theses and Master's Reports - Open

A novel solution to the long standing issue of chip entanglement and breakage in metal cutting is presented in this dissertation. Through this work, an attempt is made to achieve universal chip control in machining by using chip guidance and subsequent breakage by backward bending (tensile loading of the chip's rough top surface) to effectively control long continuous chips into small segments.

One big limitation of using chip breaker geometries in disposable carbide inserts is that the application range is limited to a narrow band depending on cutting conditions. Even within a recommended operating range, chip breakers do not function …

Engineering Research 2011, College Of Engineering, Michigan Technological University

Michigan Tech Engineering Magazine

Table of Contents

• Air & Water
• Energy
• Engineered Materials
• Health
• Sensing & Controls
• People
• Research Centers & Institutes

Undergraduate Education 2011, College Of Engineering, Michigan Technological University

Michigan Tech Engineering Magazine

Table of Contents

• Design
• International
• Research
• Programs

Developing Deterioration Models For Nebraska Bridges, George Morcous Ph.D., Afshin Hatami Ph.D.

Mid-America Transportation Center: Final Reports and Technical Briefs

Nebraska Bridge Management System (NBMS) was developed in 1999 to assist in optimizing budget allocation for the maintenance, rehabilitation and replacement needs of highway bridges. This requires the prediction of bridge deterioration to calculate life-cycle costs. At the meantime, the approach adopted to predict the deterioration of bridge components is based on national average deterioration rates, which are one drop in the deck condition rating every eight years and one drop in the superstructure and substructure condition rating every ten years. This approach does not account for the impact of traffic volume, structure and material type, and environment impacts, in …

Crash Analysis Of I-64 Closure In St. Louis County, Ghulam H. Bham Ph.D., Uday R.R Manepalli

Mid-America Transportation Center: Final Reports and Technical Briefs

On January 2, 2008, the Missouri Department of Transportation (MoDOT) closed significant portions of Missouri Interstate 64 (I-64) in St. Louis County for reconstruction. During the planning stages of this project, the proposal to close all lanes of I-64 was met with public concern regarding the possible safety risks associated with diverting I-64 traffic to adjacent roadways. A specific concern was the possibility of increased crash rates on roads designated to receive I-64 traffic flow. The following research was conducted to assess the actual outcomes related to these concerns. Crash analyses and crash rate analysis of 2008 and 2009 crash …

Performance Measures Of Warm Asphalt Mixtures For Safe And Reliable Freight Transportation Phase Ii: Evaluation Of Friction And Raveling Characteristics Of Warm Mix Asphalt Mixtures With Anti-Stripping Agents, Hosin David Lee Ph.D., P.E., Yongjoo Thomas Kim Ph.D.

Mid-America Transportation Center: Final Reports and Technical Briefs

The viscosity of asphalt decreased significantly when 0.5% of WMA additive was added,but it remained relatively steady as the dosage rate increased up to 3.0%. The reduction pattern in viscosity as the dosage rate increases was similar for both CECABASE RT® and LEADCAP at all test temperatures of 120°C,125°C, 130°C and 135 °C and a similar pattern was observed for both Sasobit® and Rediset. Based on the ABCD test device, the virgin asphalt binder PG 64-34 cracked at -51.0°C and the PG 64-28 cracked at -41.3°C. As the WMA additives were increased from 0.5%to 3.0%, the cracking temperatures increased slightly,but …

Assessing The Damage Potential In Pretensioned Bridges Caused By Increased Truck Loads Due To Freight Moments (Phase Ii), Robert J. Peterman Ph.D., P.E., Steven F. Hammerschmidt M.S.C.E.

Mid-America Transportation Center: Final Reports and Technical Briefs

With aging and deterioration of bridges, evaluation of existing conditions of their structural elements becomes vital to engineers and public officials when deciding how to repair or replace the structures. The ability to obtain necessary information on these conditions is often expensive and time consuming, especially for concrete bridges where the reinforcement is not available for inspection. Employing the surface-strain relief method could allow for accurate evaluation of aged or damaged prestressed members. The surface-strain relief method was developed to measure initial or pre-existing strains in a concrete member. It involves relieving the strain in the member and measuring the …

Effectiveness Study On Temporary Pavement Marking Removals Methods, Dr. Yong Cho, Dr. Jae-Ho Pyeon, Koudous Kabassi

Mid-America Transportation Center: Final Reports and Technical Briefs

This study was conducted to identify effective temporary marking removal methods and procedures on concrete and asphalt pavements. Pavement markings provide guidance to road travelers and can lead to accidents when not properly removed. Current state guidelines on removal do not provide clear and objective methods of measurement. After testing the most common removal methods, this research concluded that removing markings by chemical was not only cost efficient, result-oriented, and effective compared to other methods, but it was also safe to the environment and road users. Finally, a baseline of measurements was developed by the research team for this project, …

The Hemocompatibility Of A Nitric Oxide Generating Polymer That Catalyzes S-Nitrosothiol Decomposition In An Extracorporeal Circulation Model, Terry C. Major, David O. Brant, Charles P. Burney, Kagya Amoako, Gail M. Annich, Mark E. Meyerhoff, Hitesh Handa, Robert E. Bartlett

Mechanical and Industrial Engineering Faculty Publications

Nitric oxide (NO) generating (NOGen) materials have been shown previously to create localized increases in NO concentration by the catalytic decomposition of blood S-nitrosothiols (RSNO) via copper (Cu)-containing polymer coatings and may improve extracorporeal circulation (ECC) hemocompatibility. In this work, a NOGen polymeric coating composed of a Cuo-nanoparticle (80 nm)-containing hydrophilic polyurethane (SP-60D-60) combined with the intravenous infusion of an RSNO, S- nitroso-N-acetylpenicillamine (SNAP), is evaluated in a 4 h rabbit thrombogenicity model and the anti-thrombotic mechanism is investigated. Polymer films containing 10 wt.% Cuo-nanoparticles coated on the inner walls of ECC circuits are employed concomitantly with systemic SNAP administration …

Iii-Nitride Optoelectronic Devices: From Ultraviolet Detectors And Visible Emitters Towards Terahertz Intersubband Devices, Can Bayram

Link Foundation Energy Fellowship Reports

We review III-Nitride optoelectronic device technologies with an emphasis on recent breakthroughs achieved with the co-support of Link Foundation Energy Fellowship. We start with a brief summary of historical accomplishments and then report the state-of-the-art contributions in three key spectral regimes: Ultraviolet, Visible, and Near-, mid infrared, and terahertz. We also describe future trends and possible prospects in III-Nitride optoelectronic devices made possible with the fellow's work.

Achieving Ultrafine Grains In Mg Az31b-O Alloy By Cryogenic Friction Stir Processing And Machining, Anwaruddin Mohammed

Theses and Dissertations--Manufacturing Systems Engineering

This thesis presents results from the application of cryogenic cooling on multiple-pass friction stir processing and the subsequent orthogonal machining on friction stir processed and as-received Mg AZ31B-O disks, and shows their combined effects on microstructure and microhardness values. A simple friction stir tool, a specially designed fixture and liquid nitrogen are used to perform multiple-pass friction stir processing experiments on Mg AZ31B-O alloy. The friction stir processed and as-received sheets are then made into disks for the orthogonal machining experiments. This study analyzes the microhardness, microstructure changes by cryogenic friction stir processing and the effect of machining conditions such …

Conference Program, Ted Knowlton

10th International Conference on Circulating Fluidized Beds and Fluidization Technology - CFB-10

No abstract provided.

Reflections On Mathematical Models And Simulation Of Gas-Particle Flows, Sankaran Sundaresan

10th International Conference on Circulating Fluidized Beds and Fluidization Technology - CFB-10

No abstract provided.

Gas Tracer Study In A Non Mechanical L-Valve, Mohammad-Mahdi Yazdanpanah, Ali Hoteit, Ann Forret, Thierry Gauthier, Arnaud Delebarre

10th International Conference on Circulating Fluidized Beds and Fluidization Technology - CFB-10

No abstract provided.