Engineering Commons^™

Effects On Hydrogen Adsorption And Activation On Platinum In A Fuel Cell Catalyst, Jack Zhang

All Dissertations

Proton exchange membrane fuel cells are a highly efficient source of power generation that is needed to sustain the energy demands of today's more environmentally conscience society. However, the presence of impurities in the hydrogen fuel stream, such as CO, H₂S, and NH₃ from the steam reforming/partial oxidation of hydrocarbons/methanol, can severely poison the Pt electrocatalyst present in the fuel cell electrode causing degradation in the fuel cell performance. To counter these poisoning effects, fuel cell manufacturers are forced to use higher Pt loadings, which dramatically increases material costs and prevents the successful commercialization of the technology. …

The Effects Of Weather Recognition Training On General Aviation Pilot Situation Assessment And Tactical Decision Making When Confronted With Adverse Weather Conditions, Chansik Kim

All Dissertations

Previous general aviation (GA) accident studies showed that decision errors were more associated with fatal GA accidents than other kinds of human errors, and weather related accidents, especially continued visual flight rules (VFR) flight into instrument meteorological conditions (IMC), remained the major cause of fatal GA accidents. Thus, finding the underlying causes of GA pilots' decision errors and continued VFR flight into adverse weather conditions are needed to reduce weather related GA accidents as well as fatal GA accidents.
Causal factors and hypotheses of weather related GA accidents show that knowledge, experience, motivation, and weather information frequently have been referred …

Multi-Length Scale Modeling Of The High-Pressure, Large-Strain, High-Strain-Rate Response Of Soda-Lime Glass, William Bell

All Dissertations

Development of new transparent armor systems is essential for the protection of the current and future US armed forces, especially in light of the recent military operations The Operation Iraqi Freedom in Iraq and The Operation Enduring Freedom in Afghanistan. These conflicts have introduced a new military theater without a well-defined battle front and new types of threats (e.g. improvised explosive devices, IEDs). Development and modeling of new transparent armor systems for use in numerous applications from vehicle windows to face shields is a current area of thrust aimed at addressing the shortcomings of existing systems in order to better …

An Experimental And Computational Study Of Windborne Debris In Severe Storms, Arash Karimpour

All Dissertations

Abstract
This research focuses on an experimental and theoretical investigation of windborne debris emanating from loose gravel on built-up roofs. During severe storms, windborne debris can cause considerable physical harm and property damage. One of the major sources of flying debris in large commercial areas is loose gravel on built-up roofs. Such loose gravel can be responsible loss of life and significant property damage. Despite the high risk of windborne debris, their flight mechanics are poorly understood. To better understand windborne debris flight, a series of experiments were conducted in the Clemson University Boundary Layer Wind Tunnel. These experiments were …

Low-Resolution Vision For Autonomous Mobile Robots, Vidya Nariyambut Murali

All Dissertations

The goal of this research is to develop algorithms using low-resolution images to perceive and understand a typical indoor environment and thereby enable a mobile robot to autonomously navigate such an environment. We present techniques for three problems: autonomous exploration, corridor classification, and minimalistic geometric representation of an indoor environment for navigation.
First, we present a technique for mobile robot exploration in unknown indoor environments using only a single forward-facing camera. Rather than processing all the data, the method intermittently examines only small 32X24 downsampled grayscale images. We show that for the task of indoor exploration the visual information is …

Modeling Of Strain Effect On Thermal And Electrical Transport Properties Of Si/Ge Nanocomposites And Its Applications, Yaoyao Xu

All Dissertations

Nanocomposites are composite materials which incorporate nanosized particles, platelets or fibers. The addition of nanosized phases into the bulk matrix can lead to significantly different material properties compared to their macrocomposite counterparts. Due to their extraordinary properties, nanocomposites promise new applications in many fields such as ultra-high strength and ultra-light automotive parts, non-linear optics, biomedical applications, sensors and actuators, and thermoelectric devices. The design and fabrication of nanocomposite structures, devices and systems can be accelerated by developing accurate and efficient computational tools that can describe the properties and behavior of the nanocomposites. However, the development of such tools is challenging …

Development Of Reduced Complexity Models For Electromagnetic Modeling, Changyi Su

All Dissertations

The current and field distributions of various structures can be calculated using full-wave numerical modeling codes. However, this approach is limited by the complex models and extensive computational resources required to analyze the details of each structure. In addition, brute-force modeling of the entire geometry provides relatively little physical insight into the electromagnetic interference (EMI) source mechanisms. Alternatively an effective equivalent model can be obtained by eliminating sources and structures that do not contribute significantly to the radiated emissions and focusing on the features that could possibly be significant sources of EMI. Equivalent models are generally much simpler than model-everything …

An Investigation Of The Effects Of Surfactant Monolayers On Natural Convection Heat Transfer And Evaporative Mass Transfer, Steven Bower

All Dissertations

Laboratory experiments are presented that reveal the effects of surfactant monolayers on natural convection heat transfer and evaporation from bodies of water; more specifically, the situation is studied where the bulk temperature of the water is greater than the temperature of the air so that evaporative convection occurs. Four sets of experiments were performed in a laboratory environment on insulated tanks of different widths and depths for the following surface conditions: 1) clean surface, 2) oleyl alcohol covered surface, 3) stearic acid covered surface, and 4) stearyl alcohol covered surface. An infrared (IR) camera was used to verify the existence …

Computational-Analysis Assisted Introduction Of Friction Stir Welding Into Development Of Light-Weight High-Survivability Military Vehicles, Guruprasad Arakere

All Dissertations

High strength aluminum alloys with superior blast/ballistic resistance against armor piercing (AP) threats and with high vehicle light-weighing potential are being increasingly used as military-vehicle armor. Due to the complex structure of these vehicles, they are commonly constructed through joining (mainly welding) of the individual components. Unfortunately, these alloys are not very amenable to conventional fusion based welding technologies (e.g. Gas Metal Arc Welding (GMAW)) and in-order to obtain high-quality welds, solid-state joining technologies such as Friction Stir Welding (FSW) have to be employed. However, since FSW is a relatively new and fairly complex joining technology, its introduction into advanced …

The Effects Of Fundamental Mixture Parameters On Hot-Mix Asphalt Performance Properties, Wenbin Zhao

All Dissertations

Asphalt pavements are composed of three components: aggregate, asphalt binder, and air. In the process of plant production and on-site construction, the construction quality can vary in the three component and the variability can further affect a pavement's future performance.. This research identifies aggregate gradation, binder content, and air voids content as the fundamental parameters. Understanding the fundamental parameters' influence on the HMA mixture's performance properties can provide valuable information on how to improve the current quality insurance practice. The objective of this study is to conduct well-controlled experiments to investigate how mix gradation, air voids and small range binder …

Social Sustainability Considerations During Planning And Design: A Framework Of Processes For Construction Projects, Rodolfo Valdes Vasquez

All Dissertations

With increased awareness of issues such as global resource shortages and climate change, sustainability efforts are becoming more common in the construction industry. While these efforts often consider economic and environmental factors, a truly sustainable construction project also needs to include such social considerations as its impact on the surrounding community and the safety, health, and education of the workforce. For the construction industry, social sustainability requires integrating processes for improving safety, health and well-being over the project life cycle. However, an empirical and comprehensive framework defining these social sustainability processes in construction projects has yet to be clearly delineated. …

Metaheuristics For Hub Location Models, Ornurai Sangsawang

All Dissertations

In this research, we propose metaheuristics for solving two p-hub median problems.. The first p-hub median problem, which is NP-hard, is the uncapacitated single p-hub median problem (USApHMP). In this problem, metaheuristics such as genetic algorithms, simulated annealing and tabu search, are applied in different types of representations. Caching is also
applied to speed up computational time of the algorithms. The results clearly demonstrate that tabu search with a permutation solution representation, augmented with caching is the highest performing method, both in terms of solution quality and computational time among these algorithms for the USApHMP. We also investigate the performance …

Anticipating U.S. Population-Level Health And Economic Impacts Using Discrete-Event Simulation To Guide Health Policy Decisions, Odette Reifsnider

All Dissertations

This dissertation presents two applications of discrete-event simulation (DES) to represent clinical processes: (1) a model to quantify the risk of the maternal obese and diabetic intrauterine environment influence on progression to adult obesity and diabetes, and (2) a model to evaluate health and economic outcomes of different smoking cessation strategies. The first application considers the public health impact of the diabetic and obese intrauterine environment's effect on the prevalence of diabetes and obesity across subsequent generations. We first develop a preliminary DES model to investigate and characterize the epidemiology of diabetes during pregnancy and birth outcomes related to maternal …

Improving Quality Of Service In Ems Systems By Reducing Disparities Between Service Zones, Sunarin Chanta

All Dissertations

Emergency medical service (EMS) systems respond to emergency or urgent calls so as to provide immediate care, such as pre-hospital care and/or transportation, to hospitals. Care must be provided in a timely manner; in fact quality of service is usually directly associated with response time. To reduce the response time, the number and location of vehicles within the service area are important variables. However with limited capacity, increasing the number of vehicles is often an infeasible alternative. Therefore, a critical design goal is to decide at which facilities stations should be located in order to serve as much demand as …

Thermoelectric Properties Of Nickel And Titanium Co-Intercalated Titanium Diselenide, Timothy Holgate

All Dissertations

Thermoelectric materials are involved in the direct conversion between thermal and electrical energy. They may be used to generate power from a thermal gradient or to pump heat in or out of a system when driven with DC power. Much of the recent advances in thermoelectric research have been in materials whose thermoelectric efficiency has been optimized at temperatures above room temperature where power generation is the main application.
The question that I seek to answer in this dissertation is to use our standard experimental techniques in order to assess the possibility of a class of transition metal dichalcogenides bases …

Investigation Into The Role Of Airfield Pavement Deicer In Concrete Pavement Deterioration, David Wingard

All Dissertations

Premature deterioration of concrete due to materials-related distresses has been observed with increased frequency in airfield pavements across the United States in the past two decades. The use of a new breed of deicing chemicals based on alkali-acetates and alkali-formates, starting in the early 1990s, has been suspected to be one of the significant reasons for the increase in the observed deterioration. Previous laboratory-based studies have found that the early-age deterioration in concrete is associated with exposure to deicers causing acceleration of the Alkali Silica Reaction (ASR) deterioration mechanism and consequent failure. However, no systematic forensic studies on the impact …

Taxisim: A Multiagent Simulation Platform For Evaluating Taxi Fleet Operations, Shih-Fen Cheng, Thi Duong Nguyen

Research Collection School Of Computing and Information Systems

Taxi service is an important mode of public transportation in most metropolitan areas since it provides door-to-door convenience in the public domain. Unfortunately, despite all the convenience taxis bring, taxi fleets are also extremely inefficient to the point that over 50% of its operation time could be spent in idling state. Improving taxi fleet operation is an extremely challenging problem, not just because of its scale, but also due to fact that taxi drivers are self-interested agents that cannot be controlled centrally. To facilitate the study of such complex and decentralized system, we propose to construct a multiagent simulation platform …

A Computationally Efficient Ground-Motion Selection Algorithm For Matching A Target Response Spectrum Mean And Variance, Nirmal Jayaram, Ting Lin, Jack W. Baker

Civil and Environmental Engineering Faculty Research and Publications

Dynamic structural analysis often requires the selection of input ground motions with a target mean response spectrum. The variance of the target response spectrum is usually ignored or accounted for in an ad hoc manner, which can bias the structural response estimates. This manuscript proposes a computationally efficient and theoretically consistent algorithm to select ground motions that match the target response spectrum mean and variance. The selection algorithm probabilistically generates multiple response spectra from a target distribution, and then selects recorded ground motions whose response spectra individually match the simulated response spectra. A greedy optimization technique further improves the match …

Atomic-Layer-Deposited Al2o3 On Bi2te3 For Topological Insulator Field-Effect Transistors, Han Liu, Peide D. Ye

Birck and NCN Publications

We report dual-gate modulation of topological insulator field-effect transistors (TI FETs) made on Bi2Te3 thin flakes with integration of atomic-layer-deposited (ALD) Al2O3 high-k dielectric. Atomic force microscopy study shows that ALD Al2O3 is uniformly grown on this layer-structured channel material. Electrical characterization reveals that the right selection of ALD precursors and the related surface chemistry play a critical role in device performance of Bi2Te3 based TI FETs. We realize both top-gate and bottom-gate control on these devices, and the highest modulation rate of 76.1% is achieved by using simultaneous dual gate control. (C) 2011 American Institute of Physics. [doi:10.1063/1.3622306]

Characterizing And Optimizing The Molten Salt Cleaning, Yangyang Long

Theses and Dissertations - UTB/UTPA

Molten salt cleaning is an important cleaning approach in remanufacturing which can remove a variety of contaminants from metal substrates with high efficiency. Facing the very limited research of this approach in literature, this thesis intends to characterize molten salt cleaning process and optimize its parameters when big parts with complicated shapes are cleaned. Based on the development of molten salt cleaning and studies on contaminations, two experiments are conducted. The first one investigates the influences of the hot salts on three metal substrates and shows the applicable of cleaning carbon steel and grey iron parts with molten salt. The …

Using Discrete Event Computer Simulation To Analyze The Effects Of Proposed Changes To Personnel In A Hospital Medical Laboratory, Gerardo Morales

Theses and Dissertations - UTB/UTPA

A discrete event computer simulation is used to model a portion of the medical laboratory at Doctors Hospital at Renaissance in order to assess the current situation as well as to review the planed personnel changes. The area under observation is the section in which the processor(s) receive, label and distribute the patient samples. There are four cases modeled in the simulation: The main focus is to determine if one or two processors are needed per shift and if the high level of phone calls poses a significant delay to the processors’ workflow. The simulation results indicate that having two …

Assessing The Effects Of Climate Change And Addressing Solutions At L. F. Wade International Airport, Bermuda, Sebastian Romeo Phillip Brisson

Doctoral Dissertations and Master's Theses

The purpose of this thesis was to find how past trends and future predictions of climate change and associated factors would affect airport operations at the L. F. Wade International Airport. The Government of Bermuda's plans to build a new terminal were also analyzed to determine potential impacts. Predicted future trends of sea level rise and hurricane activity were assessed by analyzing previous occurrences and studies and depicted using GIS mapping data. Risk of storm surge to the L. F. Wade International Airport has become apparent, especially after Hurricane Fabian of 2003. The results of this study suggest that the …

File System Simulation: Hierarchical Performance Measurement And Modeling, Hai Quang Nguyen

Graduate Theses and Dissertations

File systems are very important components in a computer system. File system simulation can help to predict the performance of new system designs. It offers the advantages of the flexibility of modeling and the cost and time savings of utilizing simulation instead of full implementation. Being able to predict end-to-end file system performance against a pre-defined workload can help system designers to make decisions that could affect their entire product line, involving several million dollars of investment. This dissertation presents detailed simulation-based performance models of the Linux ext3 file system and the PVFS parallel file system. The models are developed …

Cushop: A Simulated Shopping Environment Fostering Consumer-Centric Packaging Design & Testing, Charles Tonkin

All Dissertations

Consumer product packaging provides product damage protection, extends product shelf life, and communicates product usage instructions to the consumer. Its collective contribution to the waste stream is notorious, but its role in product salability is much less understood. Consumers now make the majority of product purchase decisions while present at the shelf, and since they do it very quickly (within 5-8 seconds), and do not appear to adhere to strong brand loyalty as was once more common, packaging (and more specifically, its aesthetics and contrast with its competitors) plays a dominant role in the decision-making process. It is difficult, however, …

Cooperative Wireless Communications: The Impact Of Channel Uncertainty And Physical-Layer Security Considerations, Junwei Zhang

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

In this thesis, cooperative wireless communication strategies are studied in the presence of channel uncertainty and physical-layer security considerations. Initially, achievable rates and resource allocation strategies for imperfectly-known fading relay channels are investigated. Amplify-and-forward (AF) and decode-and-forward (DF) relaying schemes with different degrees of cooperation are considered. The corresponding achievable rate expressions are obtained and efficient resource allocation strategies are identified. Then, the analysis is extended to two-way decode-and-forward (DF) fading relay channels. In the second part of the thesis, the concentration is on wireless information-theoretic security. First, collaborative beamforming schemes for both DF and AF relaying are studied under …

Cyclostationary Detection For Ofdm In Cognitive Radio Systems, Marcos E. Castro

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

Research on cognitive radio systems has attracted much interest in the last 10 years. Cognitive radio is born as a paradigm and since then the idea has seen contribution from technical disciplines under different conceptual layers. Since then improvements on processing capabilities have supported the current achievements and even made possible to move some of them from the research arena to markets.

Cognitive radio implies a revolution that is even asking for changes in current business models, changes at the infrastructure levels, changes in legislation and requiring state of the art technology.

Spectrum sensing is maybe the most important part …

Improved Algorithms For Ear-Clipping Triangulation, Bartosz Kajak

UNLV Theses, Dissertations, Professional Papers, and Capstones

We consider the problem of improving ear-slicing algorithm for triangulating a simple polygon. We propose two variations of ear-slicing technique for generating “good-quality” triangulation. The first approach is based on searching for the best triangle along the boundary. The second approach considers polygon partitioning on a pre-process before applying the ear-slicing. Experimental investigation reveals that both approaches yield better quality triangulation than the standard ear-slicing method.

Time-Dependent Crack Growth Behavior Of Alloy 617 And Alloy 230 At Elevated Temperatures, Shawoon Kumar Roy

UNLV Theses, Dissertations, Professional Papers, and Capstones

Two Ni-base solid-solution-strengthened superalloys: INCONEL 617 and HAYNES 230 were studied to check sustained loading crack growth (SLCG) behavior at elevated temperatures appropriate for Next Generation Nuclear Plant (NGNP) applictaions with constant stress intensity factor (K _max = 27.75 MPa[checkmark]m) in air. The results indicate a time-dependent rate controlling process which can be characterized by a linear elastic fracture mechanics (LEFM) parameter - stress intensity factor (K). At elevated temperatures, the crack growth mechanism was best described using a damage zone concept. Based on results and study, SAGBOE (stress accelerated grain boundary oxidation embrittlement) is considered the primary reason for …

Expression And Characterization Of Protein Chimera With Embedded Activated Protein C Generation, Minjeong Schneider

Department of Chemical and Biomolecular Engineering: Dissertations, Theses, and Student Research

Increasing demand of medical implants has lead researchers to develop biomaterial surfaces that offer improved performance and lower thrombogenecity. There have been attempts to model biomaterial surfaces after the native endothelium as it represents an optimal non-thrombotic surface. Typically, when biomaterials are contacted with blood, they often invoke the activation of clotting cascades. Thus, to overcome surface mediated thrombotic events, proteins and molecules with anticoagulant attributes of the endothelium have been immobilized onto biomaterial surfaces. Protein C (PC) plays a main role in blood coagulation and acts as an anticoagulant when it is converted into activated protein C (APC). Activation …

Performance Rating Of De-Icing Chemicals For Winter Operations, Barbara M. Gerbino-Bevins

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

The cost of deicing chemicals is a significant part of the Nebraska Department of Road's winter maintenance budget. Many products are available for use in highway and bridge deicing and new products are introduced each year. The objectives of this research are to develop a laboratory test to evaluate the performance of chemical deicers, to investigate national, state, and local standards, and to develop best maintenance practices to optimize the use of chemical deicers.

This research project consists of two phases:

Phase 1: conduct a literature survey to find data from existing laboratory tests used to evaluate deicer performance.

Phase …