Engineering Commons^™

Structural Identification And Damage Identification Using Output-Only Vibration Measurements, Shutao Xing

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

This dissertation studied the structural identification and damage detection of civil engineering structures. Several issues regarding structural health monitoring were addressed.

The data-driven subspace identification algorithm was investigated for modal identification of bridges using output-only data. This algorithm was tested through a numerical truss bridge with abrupt damage as well as a real concrete highway bridge with actual measurements. Stabilization diagrams were used to analyze the identified results and determine the modal characteristics. The identification results showed that this identification method is quite effective and accurate.

The influence of temperature fluctuation on the frequencies of a highway concrete bridge was …

Stereoscopic Vision In Vehicle Navigation., Behnoush Abdollahi 1986-

Electronic Theses and Dissertations

Traffic sign (TS) detection and tracking is one of the main tasks of an autonomous vehicle which is addressed in the field of computer vision. An autonomous vehicle must have vision based recognition of the road to follow the rules like every other vehicle on the road. Besides, TS detection and tracking can be used to give feedbacks to the driver. This can significantly increase safety in making driving decisions. For a successful TS detection and tracking changes in weather and lighting conditions should be considered. Also, the camera is in motion, which results in image distortion and motion blur. …

Assessing The Surface Energy Balance Components In The Snake River Basin, W Thilini Ajanthik Jaksa

Boise State University Theses and Dissertations

This study investigated the interaction of land-surface processes and vegetation in both natural ecosystems and irrigated agricultural lands in a semiarid region using the Noah land surface model (LSM) in combination with the Weather Research and Forecasting (WRF) Model. This study was conducted in the semiarid Snake River plains of south central Idaho comprising of both natural vegetation and agricultural lands. This area is characterized by warm, dry summers with irrigation being the main moisture source during the growing season. In order to properly represent the conditions of agricultural lands and also to investigate the effects of irrigation on land-surface …

Foce Medium Voltage Load Switcher, Eric Nelson, Sean Tolibas

Electrical Engineering

No abstract provided.

Updating Purchasing Specifications For Energy-Efficient Commercial Boilers For The Federal Energy Management Program, Arturo Avila, James Lutz

STAR Program Research Presentations

The Federal Energy Management Program (FEMP) and the Environmental Energy Technology Division (EETD) at Lawrence Berkeley National Laboratory (LBNL) are conducting a research project that aims to update the current purchasing specification for energy-efficient commercial boilers. Data available on the internet was used to document the efficiencies, prices and other relevant data on commercial boilers. Boiler models were classified according to their fuel use (gas or oil) and if they produced hot water or steam. Boilers were ranked from highest to lowest thermal efficiency. Scatter plots were used to assess the ranges of efficiencies over a range of boiler capacities …

Effect Of Processing, Packaging And Vibration Treatment On The Sensory Quality Of Fresh-Cut Apple Slices, M. Siddiq, J. B. Harte, S. P. Singh, A. A. Khan, K. D. Dolan, Koushik Saha

Industrial Technology and Packaging

Fresh-cut fruit industry has seen tremendous growth in recent years. The present study was designed with the objective of studying the sensory quality of fresh-cut apple slices that were treated with different antibrowning agents, packed in three types of packaging materials and subjected to vibration treatment to simulate commercial transportation. The slices were treated with two commercial antibrowning agents [NatureSeal (Mantrose-Haeuser Co., Inc., Westport, CT, USA) and Ever-Fresh (Kraft Foods, Inc., Rye Brook, NY, USA)] at 5% (w/v) application rate. The treated slices were packaged in 5 oz polystyrene rigid container, 2 lb polyethylene bag or 2 oz polyethylene bag. …

Effect Of Different Oxygen Barrier Pouches On The Quality Of Retorted Carrots, Sarah Khor

All Theses

Thermally processed (TP) baby carrots were packaged in pouches with varying oxygen transmission rate (OTR) pouches. The pouches were four layer laminate (PET-Nylon-Barrier-CPP) with barrier layer being foil, aluminum oxide (AlOx), ethylene vinyl alcohol (EVOH), and nylon. Retort pouches were placed in boxes that were stored in an environmental chamber (43 °C, 50%RH). The objective of the study was to determine an alternative barrier retort pouch that is microwavable and still had similar barrier functions to foil for baby carrots and determine how the alternative compare with regard to shelf life. Instrumental analysis of color (L*, a*, b*) and texture …

A Priori Analysis Of Subgrid-Scale Pressure In High Pressure H2/O2 Mixing And Reacting Shear Layers, Zhiyuan Ma

All Theses

An a priori analysis of subgrid-scale pressure in high pressure combustion is carried out using three different flow fields obtained by direct numerical simulation (DNS). The simulations directly solve the Navier-Stokes equations of high pressure, transitional H₂/O₂ mixing and reacting shear layers employing a cubic Peng-Robinson real gas state equation. Detailed chemistry, multicomponent, differential, and cross diffusion are included. The results are analyzed to provide subgrid information relevant to Large Eddy Simulation (LES) of turbulent combustion. The analysis includes a detailed comparison of the actual filtered pressure with its corresponding form evaluated with the filtered primitive variables. …

Structural Health Monitoring Of Historic Masonry Monuments, Saurabh Prabhu

All Theses

Structural Health Monitoring (SHM) is a well-accepted diagnostic technique being used to evaluate modern structures. This method involves monitoring the vibration response of a structure to detect changes in its structural state. The primary intention of this thesis is to address two practical and technical difficulties encountered in deploying SHM on historic masonry monuments: (i) the selection of suitable low dimensional vibration response features that are highly sensitive to the presence and extent of damage, while having low sensitivity to extraneous noise and (ii) the selection of optimal sensor locations for efficient system identification applied to Gothic Cathedrals. Both of …

Modeling And Finite Element Alaysis Of Fluid Structure Interaction In A Wind Energy Harvester, Bargav Cheruku

All Theses

An energy harvesting system inspired by musicplaying harmonicas was developed for microwind power generation. The energy harvester uses flow-induced self-sustained oscillations of a piezoelectric beam embedded within a chamber to generate electric power. While the power generation capability of the energy harvester has been demonstrated previously, there is a lack of understanding behind the basic physics of the driving mechanism responsible for the self-sustained oscillations. In addition, the performance of the nonlinear multi-physics system with strong fluid and structure coupling depends on many physical and design parameters. A systematic study on the effects of these parameters is necessary for the …

Constrained Layer Damping Of Honeycomb Composite Structures, Rohit Telukunta

All Theses

Composite sandwich structures have replaced homogenous dense solids in many applications due to their advantages of high stiffness to weight ratio, and higher damping characteristics. Higher damping in engineering applications is desirable to reduce structural vibrations. The application of a viscoelastic layer between two thin face sheets gives rise to the concept of constrained layer damping which is an effective technique to achieve increased damping in engineering applications.
Honeycomb cellular structures are often used for the core in sandwich construction because of their low density and high stiffness properties. Regular honeycombs are defined by conventional hexagonal geometry, which gives rise …

Molecular Dynamics Study Of Particle Impact Induced Bond Breaking Of Single-Walled Carbon Nanotubes And Quality Factors Of Nanocomposite Structures, Puroorava Annapaneni

All Theses

Part A
Injection of particles to the side wall of single-walled carbon nanotubes (SWCNT) has been employed for doping and storage of particles on SWCNTs. In addition, particle bombardment can be used to cut and modify graphene structures. While the collision of hydrogen atoms with SWCNTs has been extensively studied, collision dynamic behavior of heavy particles with SWCNTs has not been well understood. To facilitate a better understanding of the particle-SWCNT collision process, in this work, we study the impact of five noble gas atoms (He, Ne, Ar, Kr, Xe) with SWCNTs and investigate particle impact induced CNT bond breaking …

The Effect Of Barrier Properties Of Non-Foil Retort Films On Shelf Life Of Oxygen Sensitive Foods, Mahalaxmi Dharman

All Theses

A simulated food product sensitive to oxygen, which was a mixture of tomato paste, water, and corn oil (2:2:1), was filled into five different barrier coated pouches, a foil barrier and a low barrier pouch. These pouches were thermally processed at 250¡F for 30 minutes and stored in darkness under accelerated conditions (45±2¡C and 50±2%RH) for up to 180 days.
The simulant was analyzed for lipid oxidation by TBARS and lycopene degradation by colorimetry (L*,a*,b* values and Hue angle). The oxygen permeability (OP) in all the pouches increased by 5 to 500 fold after retort. TBARS values in all pouches …

A Priori Analysis Of Subgrid-Scale Heat Flux Vectors In High Pressure H2/O2 Mixing And Reacting Shear Layers, Ayse Korucu

All Theses

A Direct Numerical Simulation (DNS) database of supercritical, transitional H2/O2 mixing and reacting shear layers is analyzed in an a priori manner to obtain subgrid statistics relevant to Large Eddy Simulation (LES) engineering modeling. The DNS employs a real gas state equation, detailed chemistry, accurate property models, multicomponent, differential, and cross diffusion. The parallel simulations were conducted using eighth order central finite differencing in conjunction with a fourth order accurate Runge-Kutta time integration, on resolutions up to 135 million grid points, and used up to 2,016 processing cores. All simulations are for an ambient pressure of 100 atm and are …

Sensitivity Analysis Of Load Distribution In Light-Framed Wood Roof System Due To Typical Modeling Parameters, Ranjith Shivarudrappa

All Theses

Since failure of roof systems in past high wind events have demonstrated the consequences of not maintaining a continuous load path from the roof to the foundation, many studies have been conducted to better understand this load path, including how loads are distributed in the system. The present study looks to add to the current knowledge of the vertical load path by focusing on uplift loads and by considering the sensitivity of different modeling parameters. This is done by developing and assessing load influence coefficients for various roof-to-wall (RTW) connections. An analytical model of a light-framed wood structure using finite …

Injection Molding Of Micro-Features, Manjesh Dubey

All Theses

A method for creating regular arrays of surface features in the 10µm to 200µm range over large areas in metallic materials enables the use of treated surfaces on injection molds. This surface control is used for manufacturing products with controllable optical, tribological, heat transfer, and surface tension properties. However, the flow, filling, and solidification behavior of molten polymer at the micro scale is not well understood.
Therefore, the purpose of this study is to understand the formation of micro-structure on a polymer surface and derive a range of robust solutions for injection molding of these micro-featured surfaces. This study uses …

Retrofit Solutions For Sealed Pervious Concrete Pavements, Gregory Bunting

All Theses

The goal of this research was to design, implement, and evaluate several retrofit solutions for sealed pervious concrete. Properly functioning pervious concrete pavements allow water to drain through the structure, eliminating the need for traditional drainage infrastructure. A recent study of South Carolina porous pavements (Putman 2010) revealed that some pervious concrete pavements are not properly draining, either because of sealing at the surface. Sealed pavements are generally a result of construction processes, and sealed pavements cannot be fixed with sediment removal techniques such as vacuuming and pressure washing. This study investigates a technique to increase infiltration of sealed pervious …

Evaluation Of Warm Mix Open Graded Friction Course Mixtures, James Wurst

All Theses

The goal of this study was to evaluate EvothermTM (a chemical package) and foaming (a water-injection method) warm mix asphalt (WMA) technologies to determine their effectiveness in producing high quality open graded friction course (OGFC) mixes. Specifically, this study focused on the effect of the removal of stabilizing additives (fibers and polymers) on the optimum binder content and performance of WMA OGFC mixtures. By focusing on additive removal, this study attempted to evaluate practical production concerns and the possible benefits of WMA technologies combined with OGFC.
The EvothermTM WMA and foaming WMA mixes were compared to traditional HMA OGFC by …

Predicting The Thermal Performance For The Multi-Objective Vehicle Underhood Packing Optimization Problem, Ravi Teja Katragadda

All Theses

The ever increasing demands towards improvement in vehicle performance and passenger comfort have led the automotive manufacturers to further enhance the design in the early stages of the vehicle development process. Though, these design changes enhance the overall vehicle performance to an extent, the placement of these components under the car hood also plays a vital role in increasing the vehicle performance. The study of the placement of these components in an automobile underhood forms a 3-Dimensional packaging problem. In the past, a study on the automobile underhood packaging problem was conducted and a multi objective optimization routine with three …

Friction Stir Welding (Fsw) Process Modeling And Fsw Joint Design For Blast Survivable Structures, Anand Hariharan

All Theses

In order to satisfy the need for better ballistic performance against lethal threats, new grades of Titanium (e.g. Ti-6Al-4V) and Aluminum (e.g. AA5083) alloys are being employed in the design of blast survivable structures. These better performing alloys are not readily amenable to conventional welding process or result in inferior welds when joined using conventional welding process. On the other hand, Friction Stir Welding (FSW), a relatively new welding process, has been found to be successful in producing good quality welds in these alloys. FSW also offers better weld performance in comparison with the conventional welding process. But the methodology …

Investigation Of The Effect Of Aggregate Gradation On Open Graded Friction Course Mixtures, Talat Mansour

All Theses

An open graded friction course (OGFC) is a type of porous pavement that has been used to improve safety, mainly in wet conditions. However, this mix also has exhibited poor durability and strength which limits its use in some pavement applications. This research investigated the effect of aggregate gradation on the performance of OGFCs. Ten OGFC gradations which are used by twenty different states were compared. One asphalt binder was used throughout the research (PG76-22) and hydrated lime and cellulose fibers were also added to all of the mixes.
Several tests, using various standardized testing procedures, were used in this …

Sediment Based Turbidity Analyses For Representative South Carolina Soils, Katherine Resler

All Theses

Construction activities have been recognized to have significant impacts on the environment. Excess sediment from construction sites is frequently deposited into nearby surface waters, negatively altering the chemical, physical and biological properties of the water body. This environmental concern has led to strict laws concerning erosion and sediment control, such as imposing permit conditions that limit the concentration of suspended solids that can be present in effluent water from construction sites. However, sediment concentration measurements are not routinely used to detect and correct short-term problems or permit violations because laboratory analysis of sediment concentrations is time-consuming and costly. Nevertheless, timely, …

Effect Of Accelerated Aging On Mechanical Properties And Structure Of Nano-Scale Composite Systems, David Economy

All Theses

Nano-scale composites are being investigated by academic, industrial, and national laboratories for potential applications such as wear resistant coatings and high strength foils. These structures are of interest due to their as-fabricated mechanical properties, such as high strength for nanolaminates. However, there have only been limited studies of the long-term mechanical stability. A greater understanding of how these systems might respond to sustained use is needed before these systems transition from research laboratories into widespread application. It is the objective of this thesis to clarify the link between accelerated aging using elevated temperatures over time and mechanical properties of two …

Analytical Solutions Using High Order Composite Laminate Theory For Honeycomb Sandwich Plates With Viscoelastic Frequency Dependent Damping, Nan Shan

All Theses

Analytical methods allow parametric changes in geometric and material properties of a honeycomb sandwich plate for studies of stiffness, mass, and damping characteristics with low computational cost. However, studies based on analytical methods are still limited with frequency independent damping models. Specifically, previous analytical models have not consider the frequency dependent damping for viscoelastic honeycomb core sandwich composites, while some work has been done on studying the honeycomb sandwich plate using finite element method, which can be computationally expensive for multiple parameter studies. Therefore, in this work, the honeycomb sandwich plate is studied analytically based on the cellular material theory, …

Extracting Depth Information From Stereo Vision System, Using A Correlation And A Feature Based Methods, Mahmoud Abdelhamid

All Theses

This thesis presents a new method to extract depth information from stereo-vision acquisitions using a feature and a correlation based approaches. The main implementation of the proposed method is in the area of Autonomous Pick & Place, using a robotic manipulator. Current vision-guided robotics are still based on a priori training and teaching steps, and still suffer from long response time.
The study uses a stereo triangulation setup where two Charged Coupled Devices CCDs are arranged to acquire the scene from two different perspectives. The study discusses the details of two methods to calculate the depth; firstly a correlation matching …

Viscoelastic Damping Of Hexagonal Honeycomb Sandwich Panels, Nikhil Seera

All Theses

Composite sandwich structures with a viscoelastic core material constrained between thin stiff face sheets are an effective means of damping in engineering applications. Damping introduces energy dissipation which helps control vibration amplitudes. Conventional Hexagonal honeycombs are often referred to as regular honeycombs and are defined by cellular geometry with effective positive Poisson's ratio. Regular honeycombs are commonly used for the cores of sandwich plates because of their low density and high stiffness properties. Honeycombs with negative in-plane Poisson's ratio are known as Auxetic honeycombs and offer enhancement of mechanical properties such as impact absorption, damage resistance, when compared to regular …

Behavior Of The Next-D Beam Shear Key: A Finite Element Approach, Armando Flores

All Theses

State Departments of Transportation have been using adjacent precast bridges for many years. A vital component of this type of bridges is the connection between the members, which is typically done with a grouted shear key. Shear keys have changed through time to adapt to the requirements of bridge design. An assessment of the Northeast Extreme Tee with integral deck (NEXT-D) was performed for the SCDOT as a development possibility for short span bridges. This research focuses on the finite element analysis study of the NEXT-D's specific shear key configuration.
A review of shear key configurations used by different DOTs …

The Effects Of Retrogression And Reaging On Aluminum Alloy 2195, N. Ward, A. Tran, A. Abad, E. W. Lee, M. Hahn, E. Fordan, Omar S. Es-Said

Mechanical Engineering Faculty Works

A retrogression and reaging (RRA) treatment was performed on 2195 Al-Li Alloy. The exposure times were from 5 to 60 min, and the temperatures were from 200 to 250 A degrees C. Samples that were exposed to a salt spray test had overall similar mechanical properties as compared to those that were not exposed. The percent elongation, however, was significantly deteriorated due to the salt spray exposure. The mechanical properties of the 2195 samples were compared to those of 2099 samples exposed to similar treatments in an earlier study.

Electrokinetic Transport And Manipulation Of Particles In Curved Microchannels, Junjie Zhu

All Dissertations

The investigation of electrokinetic particle transport in confined microchannels has practical significances in a variety of applications ranging from traditional gel electrophoresis to electrokinetic microfluidics-based lab-on-a-chip devices. To date, however, studies on particle electrokinetics have been limited to primarily theoretical or numerical analyses in straight microchannels of simple geometries. Very little work has been done on electrokinetic particle motions in real microchannels which usually consist of one or multiple turns. This thesis is dedicated to the fundamental and applied studies of electrokinetic transport and manipulation of particles in various curved microchannels using a combined experimental, theoretical, and numerical method.
First, …

Contaminant Mass Transfer During Boiling In Fractured Geologic Media, Fei Chen

All Dissertations

Remediation of fractured geologic media contaminated with chlorinated volatile organic compounds that diffuse into the matrix is challenging using isothermal methods. Due to the low permeability of the matrix material and uncertainty of fracture networks, it is difficult to flush the system with any type of fluid or deliver remediation agents into the matrix. However, thermal methods have some promises. When the matrix is heated above water boiling temperature, depressurization in the fractures may trigger water boiling in the matrix, which, as a result, generates a large volumetric steam flow toward adjacent fractures, stripping the adsorbed or dissolved volatile contaminants …