Engineering Commons^™

Determining Warehouse Storage Location Assignments Using Clustering Analysis, Carl Egas, Dale Masel

11th IMHRC Proceedings (Milwaukee, Wisconsin. USA – 2010)

The methodology used to assign products to a storage location in a warehouse can have a significant impact on the amount of time required to retrieve all of the items needed to fill an order. This paper describes a methodology that uses a clustering approach to determine storage assignments, where the metric of the strength of the relationship between two stock-keeping units (SKUs) is the number of times that the SKUs appear in the same order. Clustering is performed to maximize the frequency with which SKUs in the same cluster are ordered together. In testing, the clustering assignments were compared …

Using Data Envelopment Analysis To Evaluate The Performance Of Third Party Distribution Centers, Ching-Jung Ting, Hsueh-Lin Fang

11th IMHRC Proceedings (Milwaukee, Wisconsin. USA – 2010)

There has been considerable interest worldwide in last few years in the growth of third party logistics (3PL) providers. 3PL distribution center (DC) enables firms to achieve reduced operating costs, increased revenues, and to focus on their core competence. This research aims to find the key performance indicators through a survey of a set of DCs and then evaluate their efficiency over the period 2005-2007 using data envelopment analysis (DEA) models based on selected performance indicators as inputs and outputs. Three inputs and two outputs for all DCs from the surveyed performance indicators were selected in this study. DEA is …

Freight Sequencing To Improve Hub Operations In The Less-Than-Truckload Freight Transportation Industry, Xiangshang Tong, Kimberly Ellis, Amy Brown Greer

11th IMHRC Proceedings (Milwaukee, Wisconsin. USA – 2010)

In less-than-truckload freight transportation, hub operations affect the service levels that carriers are able to provide their customers. This paper focuses on improving the efficiency of hub operations by reducing freight handling time and cost. Specifically, the freight sequencing problem (FSP) is investigated to determine the freight unloading and loading sequence that minimizes the time for dock workers to transfer shipments from origin trailers to destination trailers. The FSP is modeled as a Rural Postman Problem (RPP) and three algorithms are compared: trailer-at-atime, nearest neighbor, and balance-and-connect. Using five industrial data sets, the results demonstrate the effectiveness, advantages, and disadvantages …

Analysis Of Picker Blocking In Narrow-Aisle Batch Picking, Soondo Hong, Andrew L. Johnson, Brett A. Peters

11th IMHRC Proceedings (Milwaukee, Wisconsin. USA – 2010)

This study analyzes impacts by batch picking on picker blocking in narrow-aisle order picking, and determines appropriate batch formations for a better order picking throughput. We present multiple-pick analytical models to offer insights about picker blocking in batch picking. Several simulation studies over a variety of batching situations scrutinize order batching situations which give throughput benefits in narrow-aisle configurations by satisfying the analytical results. Our results highlight three findings for narrow-aisle batch picking processes: 1) variation of pick probability in batch picking is inevitable and is a primary driver of picker blocking; 2) a near-optimal distance-based batching algorithm can experience …

Towards A Physical Internet: The Impact On Logistics Facilities And Material Handling Systems Design And Innovation, Benoit Montreuil, Russell D. Meller, Eric Ballot

11th IMHRC Proceedings (Milwaukee, Wisconsin. USA – 2010)

Aiming for a radical sustainability improvement, the Physical Internet has the potential of revolutionizing the fields of material handling, logistics, transportation and facilities design. It exploits the enabling concept of standardized, modular and smart containers as well as the universal interconnectivity of logistics networks and services. Its underlying paradigm shift creates a tremendous breakthrough innovation opportunity for the material handling and facility logistics community in terms of equipment, systems and facility design and operation. This paper provides a primer overview of a key subset of the physical elements serving as the foundation of the Physical Internet infrastructure, classified in three …

Multiple-Grooved Magnetic Traction Sheaves, Thorsten Schmidt, Thomas Leonhardt, Martin Anders

11th IMHRC Proceedings (Milwaukee, Wisconsin. USA – 2010)

This paper discusses a new and innovative form of traction sheaves, which can be used in many hoisting applications that are driven with wire ropes in material handling systems. By use of high performance permanent magnets, integrated in the periphery of traction sheaves, a significant increase of driving capacity is achieved. In this special case it concerns high energy magnets consisting of rare earth materials known as NdFeB magnets. These magnets provide a 20 times higher force than conventional magnets. The results of the research show that the driving capacity of traction sheaves with a round groove design can be …

Design Of Cross-Chain Internet Order Fulfillment Centres, Kees Jan Roodbergen, Iris F. A. Vis, Jaap Boter

11th IMHRC Proceedings (Milwaukee, Wisconsin. USA – 2010)

Many consumers have embraced the option of ordering via the Internet, which has resulted in an enormous increase in direct orders compared to the times when direct ordering was done by catalogue and phone. The fulfillment process in the supply chain is an important factor for these consumers impacting how long they must wait between ordering and delivery. This fact has significantly increased the importance of the back-end fulfillment process. We present a novel supply chain design to enable cross-chain coordination of order fulfillment operations for internet sales. Shared warehousing facilities are used more and more to achieve competitive advantage. …

Class-Based Storage With A Finite Number Of Items, Yugang Yu, René B.M. De Koster

11th IMHRC Proceedings (Milwaukee, Wisconsin. USA – 2010)

ABC class-based storage is widely studied in literature and applied practice. It divides all stored items into a limited number of classes according to their demand rates (turnover per unit time). Classes of items with higher turnovers are stored in a region closer to the warehouse depot. In literature, it is commonly shown that the use of more storage classes leads to shorter travel time for storing and retrieving items. A basic assumption in this literature commonly is that the required storage space of items equals their average inventory levels, which is right if an infinite number of items are …

Designing Automated Warehouses By Minimising Investment Cost Using Genetic Algorithms, Tone Lerher, Iztok Potrc, Matjaz Sraml

11th IMHRC Proceedings (Milwaukee, Wisconsin. USA – 2010)

The successful performance of the automated storage and retrieval systems is dependent upon the appropriate design and optimization process. In the present work a comprehensive model of designing automated storage and retrieval system for the single- and multi-aisle systems is presented. Because of the required conditions that the automated storage and retrieval systems should be technically highly efficient and that it should be designed on reasonable expenses, the objective function represents minimum total cost. The objective function combines elements of layout, time-dependent part, the initial investment and the operational costs. Due to the nonlinear, multi-variable and discrete shape of the …

Drive And Motion Design In Material Handling Equipment, Jorg Oser, Christian Landschutzer

11th IMHRC Proceedings (Milwaukee, Wisconsin. USA – 2010)

Drives account in many cases up to one third of the costs of material handling equipment. This fact justifies a closer look to important drive and motion issues. Typical design criteria for drives are energy and power consumption, wear, heat and noise generation. Engineering design activities start with the generation of the system configuration, that is to make appropriate topological decisions where to locate the drives in the equipment structure. These decisions define to a great extent the functional quality of the mechanical structure and the distribution of forces in the power train. For early design stages an elasto-kinetic model …

Determination Of Operational Parameters For An Efficient Container Service In The Port Of Guaymas, Cesar Meneses, J. René Villalobos

11th IMHRC Proceedings (Milwaukee, Wisconsin. USA – 2010)

The port of Guaymas is located in Sea of Cortez in the Northern Pacific Coast of Mexico. Its hinterland is basically the Northwestern region of Mexico and the Southwestern United States. The Port currently focuses on bulk and liquid cargo and does not provide container services. In this paper, we explore some of the characteristics that a container service should have to be competitive in servicing the needs of the regional industry. Since the study deals with port selection decision from the industry’s point of view, we introduce a port selection model based on a Total Landed Cost (TLC) metric. …

Green Supply Chains Initiatives In Transport And Logistics Service Industry: An Exploratory Case Study Analysis, Pietro Evangelista, Edward Sweeney, Gabriella Ferruzzi, Juan Carlos Carrasco

Conference papers

No abstract provided.

Methodology For Designing Structures To Withstand Extreme Environments: Performance Based Specifications, S. Nanukuttan, Niall Holmes, S. Srinivasan, L. Basheer, P.A.M. Basheer, L. Tang, J. Mccarter

Conference papers

Existing guidelines in BS 8500 allow the selection of concrete mix based on variables such as compressive strength, maximum water to binder ratio, minimum cement content and minimum cover thickness. This approach does not guarantee the durability and expected performance of the concrete structure in a given environment. One alternative is to develop performance- based specifications that supplement the existing guidelines in BS 8500, by specifying the required performance of concrete in terms of measurable properties such as resistance to environmental penetrations. This paper demonstrates one of such methodology for developing performance-based specifications for concretes exposed to marine environments. Chloride …

Implementation Of Lessons Learned From Change Orders: A Supplement To Kyspr 09-384, Paul M. Goodrum, Timothy R. B. Taylor, William Lester, Alex Mccoy, Mohammed M. Uddin, Yongwei Shan

Kentucky Transportation Center Research Report

Which change orders tend to have the greatest impact on Kentucky transportation projects? How can I avoid them on future projects? If I do have a change order, what process can I follow to estimate a fair price for both the Cabinet and the Contractor? These are some of the questions that were addressed by research project Change Orders and Lessons Learned (KYSPR 09‐384) at the University of Kentucky’s Kentucky Transportation Center.

Why the Need for this Supplement?

Traditional research reports through the Kentucky Transportation Center contain a significant amount of scientific and technical discussion regarding the research activities and …

Stochastic Optimal Control In Nonlinear Systems, Celestin Nkundineza

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

Stochastic control is an important area of research in engineering systems that undergo disturbances. Controlling individual states in such systems is critical. The present investigation is concerned with the application of the stochastic optimal control strategy developed by To (2010) and its implementation as well as providing computed results of linear and nonlinear systems under stationary and nonstationary random excitations. In the strategy the feedback matrix is designed based on the achievement of the objectives for individual states in the system through the application of the Lyapunov equation for the system. Each diagonal element in the gain or associated gain …

Quantitative Imaging Reveals Heterogeneous Growth Dynamics And Treatment-Dependent Residual Tumor Distributions In A Three-Dimensional Ovarian Cancer Model, Jonathan P. Celli, Imran Rizvi, Conor L. Evans, Adnan O. Abu-Yousif, Tayyaba Hasan

Dartmouth Scholarship

Three-dimensional tumor models have emerged as valuable in vitro research tools, though the power of such systems as quantitative reporters of tumor growth and treatment response has not been adequately explored. We introduce an approach combining a 3-D model of disseminated ovarian cancer with high-throughput processing of image data for quantification of growth characteristics and cytotoxic response. We developed custom MATLAB routines to analyze longitudinally acquired dark-field microscopy images containing thousands of 3-D nodules. These data reveal a reproducible bimodal log-normal size distribution. Growth behavior is driven by migration and assembly, causing an exponential decay in spatial density concomitant with …

Performance Evaluation Of Open Graded Base Course With Doweled And Non-Doweled Transverse Joints, Robert Schmitt, Samuel Owusu-Ababio, James Crovetti

Transportation Reports with the Wisconsin Department of Transportation

The objectives of this study were to investigate the performance of 20-year old doweled/non-doweled and dense-graded/permeable base test sections on three concrete pavement segments in Wisconsin: USH 18/151 in Iowa and Dane counties, STH 29 in Brown County, and USH 151 in Columbia and Dane Counties. Five pavement bases were placed including: dense graded, asphalt-stabilized permeable, cement-stabilized permeable, and untreated permeable having two gradation sizes.

USH 18/151 test sections had similar performance (PDI) for doweled unsealed pavement on dense and permeable base. Distresses common to all segments included slight to moderate distressed joints/cracks and slight transverse faulting. Asphalt-stabilized permeable base …

Kinetics Of Dna And Rna Hybridization In Serum And Serum-Sds, Elton Graugnard, Amber Cox, Jeunghoon Lee, Cheryl Jorcyk, Bernard Yurke, William L. Hughes

Materials Science and Engineering Faculty Publications and Presentations

Cancer is recognized as a serious health challenge both in the United States and throughout the world. While early detection and diagnosis of cancer leads to decreased mortality rates, current screening methods require significant time and costly equipment. Recently, increased levels of certain micro-ribonucleic acids (miRNAs) in the blood have been linked to the presence of cancer. While blood-based biomarkers have been used for years in cancer detection, studies analyzing trace amounts of miRNAs in blood and serum samples are just the beginning. Recent developments in deoxyribonucleic acid (DNA) nanotechnology and DNA computing have shown that it is possible to …

Coated Steel Rebar For Enhanced Concrete-Steel Bond Strength And Corrosion Resistance, Genda Chen, Jeffery S. Volz, Richard K. Brow, Dongming Yan, Signo Tadeu Dos Reis, Chenglin Wu, Fujian Tang, Charles R. Werner, Xing Tao

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

This report summarizes the findings and recommendations on the use of enamel coating in reinforced concrete structures both for bond strength and corrosion resistance of steel rebar. Extensive laboratory tests were conducted to characterize the properties of one- and two-layer enamel coatings. Pseudostatic tests were performed with pullout, beam and column specimens to characterize mechanical properties and develop design equations for the development length of steel rebar in lap splice and anchorage areas. The splice length equation was validated with the testing of large-scale columns under cyclic loading. For corrosion properties, ponding, salt spray, accelerated corrosion, potentiodynamic and electrochemical impedance …

"Pull-In" Of A Pre-Stressed Thin Film By An Electrostatic Potential: A 1-D Rectangular Bridge And A 2-D Circular Diaphragm, Gang Duan, Kai Tak Wan

Mechanical and Aerospace Engineering Faculty Research & Creative Works

A one-dimensional (1-D) rectangular pre-stressed thin film clamped at two opposite ends is actuated by an electrostatic voltage applied to a pad directly underneath. the pre-stress is allowed to be either tensile or compressive in nature. at a critical applied voltage, the film becomes unstable and makes direct contact with the pad, leading to "pull-in". an elastic model is constructed to account for the phenomenon over ranges of film pad gap and residual stress. the results compare favorably with finite element analysis (FEA) in literature and experimental data and possess distinct advantages over other available closed-form solutions. the model is …

Negative Dielectrophoretic Capture Of Bacterial Spores In Food Matrices, Mehti Koklu, Seungkyung Park, Suresh D. Pillai, Ali Beskok

Mechanical & Aerospace Engineering Faculty Publications

A microfluidic device with planar square electrodes is developed for capturing particles from high conductivity media using negative dielectrophoresis (n-DEP). Specifically, Bacillus subtilis and Clostridium sporogenes spores, and polystyrene particles are tested in NaCl solution (0.05 and 0.225 S/m), apple juice (0.225 S/m), and milk (0.525 S/m). Depending on the conductivity of the medium, the Joule heating produces electrothermal flow (ETF), which continuously circulates and transports the particles to the DEP capture sites. Combination of the ETF and n-DEP results in different particle capture efficiencies as a function of the conductivity. Utilizing 20 μm height DEP chambers, “almost complete” and …

Design Of A Conditioner For Smoothing Wind Turbine Output Power, Murali Bottu, Mariesa Crow, A. Curt Elmore

Electrical and Computer Engineering Faculty Research & Creative Works

As a result of wind speed intermittency, highly variable wind power output can adversely impact local loads. We propose a conditioner to smooth the variable wind power by utilizing the energy of an ultracapacitor. The conditioner is based on a single phase voltage source inverter (VSI) connected between the grid interconnection point and the ultracapacitor. The shunt VSI injects or absorbs active power from the line to smooth the wind power by utilizing the short term storage capabilities of the ultracapacitor. The ultracapacitor is connected to the DC link through a DC-DC converter, which maintains the voltage of the DC …

A Synthesis Of Overweight Truck Permitting, Muhammad K. Bilal, Muhammad Irfan, Anwaar Ahmed, Samuel Labi, Kumares C. Sinha

JTRP Technical Reports

For purposes of safety and system preservation, trucking operational characteristics are regulated through legislation and policies. However, special permits are granted for trucks to exceed specified operational restrictions. Thus, the Indiana DOT not only seeks highway operations policies that retain/attract heavy industry including those that haul large loads but also seeks to protect the billions of taxpayer dollars invested in highway infrastructure. As such, it is sought to avoid policies that may lead to premature and accelerated deterioration of assets through excess loading or undue safety hazard through oversize loads. This study was carried out primarily to document the state …

Refine Process To Identify, Evaluate, And Adopt New Technologies And Identify New Proven Technologies For Indiana, Joseph V. Sinfield

JTRP Technical Reports

No abstract provided.

Determination Of Unit Hydrograph Parameters For Indiana Watersheds, Jared L. Wilkerson, Venkatesh M. Merwade

JTRP Technical Reports

Regression equations predicting Clark Synthetic Unit Hydrograph (SUH) parameters for time of concentration (tc) and storage coefficient (R) are developed for small watersheds across Indiana [drainage areas = 3-38 square miles (mi2)]. The state is partitioned into three regions: North, Central, and South, with consideration for past regionalization studies of Indiana and geomorphology. The equations are derived using multiple linear regression analysis for 30 watersheds with 90 observed rainfall-runoff events. Clark SUH parameters are optimized using Hec-HMS to match the observed rainfall-runoff events. The optimized Clark SUH parameters are related to geomorphologic parameters estimated using geographic information system (GIS) applications. …

Progressive Failure Simulation Of Security Cable Barriers, Christopher Y. Tuan, Ratul D. Sarmah, Alexander Y. Tuan, Ching-Sheng Kao, Q. S. Li

Civil Engineering Faculty Publications

Perimeter security cable barriers are widely used by various agencies all over the world to defeat threat vehicle penetration. New barrier designs require crash test validation prior to implementation. Full-scale vehicular crash tests are costly, whereas designs via finite element simulations are time consuming and require specialized skills. Based on full-scale crash tests, an innovative and simple algorithm has been developed to model the progressive failure of security cable barriers. A multi-body approach based on the first principles of physics was developed to substantially reduce computer runtime. The solution algorithm uses a large number of small time steps. Nonlinear vehicle …

Sae Baja: Final Drive Gearbox, Michael Mccausland, Michael Watkins, Ian Masterson, Andrew Sommer

Mechanical Engineering

This paper presents the results of a manual transmission project for SAE Baja. A full engineering process is documented, including problem definition, scheduling, conceptualization, decision theory, synthesis, analysis, manufacturing, and testing. A comparison is made between existing and potential mechanical power train solutions. The final design is analyzed in dynamic simulations, AGMA stress, predicted FFT spectrums, and shifting rod buckling. A number of complicated parts are manufactured through investment casting and direct CNC machining. Issues in the final assembly have prevented the project from being fully realized, recommendations are made for future SAE Baja teams.

Differential Regulation Of Immature Articular Cartilage Compressive Moduli And Poisson’S Ratios By In Vitro Stimulation With Igf-1 And Tgf-Β1, Gregory M. Williams, Kristin J. Dills, Christian R. Flores, Michael E. Stender, Kevin M. Stewart, Lauren M. Nelson, Albert C. Chen, Koichi Masuda, Scott J. Hazelwood, Stephen M. Klisch, Robert L. Sah

Mechanical Engineering

Mechanisms of articular cartilage growth and maturation have been elucidated by studying composition-function dynamics during in vivo development and in vitro culture with stimuli such as insulin-like growth factor-1 (IGF-1) and transforming growth factor-beta 1 (TGF-β1). This study tested the hypothesis that IGF-1 and TGF-β1 regulate immature cartilage compressive moduli and Poisson’s ratios in a manner consistent with known effects on tensile properties. Bovine calf articular cartilage from superficial-articular (S) and middle-growth (M) regions were analyzed fresh or following culture in medium with IGF-1 or TGF-β1. Mechanical properties in confined (CC) and unconfined (UCC) compression, cartilage matrix composition, and explant …

Optimal Design Of Work Zone Median Crossovers, Karen Schurr, Brian R. Garnder, Shashwat Rijal

Nebraska Department of Transportation: Research Reports

No abstract provided.

Cloud Computing:Strategies For Cloud Computing Adoption, Faith Shimba

Dissertations

The advent of cloud computing in recent years has sparked an interest from different organisations, institutions and users to take advantage of web applications. This is a result of the new economic model for the Information Technology (IT) department that cloud computing promises. The model promises a shift from an organisation required to invest heavily for limited IT resources that are internally managed, to a model where the organisation can buy or rent resources that are managed by a cloud provider, and pay per use. Cloud computing also promises scalability of resources and on-demand availability of resources.

Although, the adoption …