Engineering Commons^™

Shaft Torsional Vibration Response Of Vertical Axis Ocean Current Turbine Model Due To Torque Excitation, Adi Wirawan Husodo, I Ketut Aria Pria Utama, I Made Ariana

Makara Journal of Technology

Shaft Torsional Vibration Response of Vertical Axis Ocean Current Turbine Model Due to Torque Excitation. The current research aimed to study the torsional vibration response of Vertical Axis Ocean Current Turbine due to randomly torque excitation pattern, owing to the variety of ocean current velocity. The turbine model is composed of 3 aluminum blades of NACA 0018 connected to steel shaft. Turbine dimensions are 10 cm of chord, 1.8 cm of chamber and 100 cm of span. The variation of ocean current velocity is 0.5 m/s, 1.0 m/s, 1.5 m/s, 2.0 m/s, 2.5 m/s and 3.0 m/s. The Model has …

Dye Sensitized Solar Cell With Conventionally Annealed And Post-Hydrothermally Treated Nanocrystalline Semiconductor Oxide Tio2 Derived From Sol-Gel Process, Akhmad Herman Yuwono, Badrul Munir, Alfian Ferdiansyah, Arif Rahman, Wulandari Handini

Makara Journal of Technology

Dye-sensitized solar cell (DSSC) is one of the very promising alternative renewable energy sources to anticipate the declination in the fossil fuel reserves in the next few decades and to make use of the abundance of intensive sunlight energy in tropical countries like Indonesia. In the present study, TiO2 nanoparticles of different nanocrystallinity was synthesized via sol−gel process with various water to inorganic precursor ratio (Rw) of 0.85, 2.00 and 3.50 upon sol preparation, followed with subsequent drying, conventional annealing and post-hydrothermal treatments. The resulting nanoparticles were integrated into the DSSC prototype and sensitized with an organic dye made of …

An Empirical Model For Build-Up Of Sodium And Calcium Ions In Small Scale Reverse Osmosis, Subriyer Nasir

Makara Journal of Technology

A simple models for predicting build-up of solute on membrane surface were formulated in this paper. The experiments were conducted with secondary effluent, groundwater and simulated feed water in small-scale of RO with capacity of 2000 L/d. Feed water used in the experiments contained varying concentrations of sodium, calcium, combined sodium and calcium. In order to study the effect of sodium and calcium ions on membrane performance, experiments with ground water and secondary effluent wastewater were also performed. Build-up of salts on the membrane surface was calculated by measuring concentrations of sodium and calcium ions in feed water permeate and …

The Effect Of Enzymatic Hydrolysis On The Properties Of Protein Hydrolysate From Paddy Mushroom, Niken Widya Palupi, Wiwik Siti Windrati, Tamtarini Tamtarini

Makara Journal of Technology

Protein hydrolysate was prepared from Paddy (Volvariella volvaceae) mushroom. Hydrolysis uses commercially protease available Protamex ™ with enzyme concentration of 0.1% (w/w). Hydrolysis was performed at three different temperatures (room temperature, 40 °C, and 50 °C) with different incubation periods (60, 90, and 120 minutes). Enzyme inactivation was done in 90 °C for 3 minutes. Yield and degree of hydrolysis ranged from 94.76% to 99.55% and 19.06% to 24.59%. Protein solubility was about 89–11,8%. The longer time of hydrolysis, the darker the color of protein hydrolysate. Protein hydrolysate which has hydrolysis at 50 °C for 120 minutes has the highest …

Effect Of Diafiltration On Preparation Of Fermented Mung Beans Concentrate As Probiotic Savory Flavor Through Ultrafiltration Membrane, Aspiyanto Aspiyanto, Agustine Susilowati

Makara Journal of Technology

Diafiltration by means of the ultrafiltration system of probiotic fermented Mung beans (Phaseolus radiatus L.) concentrate has been performed to reduce or eliminate salts and smaller impurities than the nominal cut-off of the membrane of 20,000 nominal weight cut-off (NWCO). These processes have been conducted as an attempt in order to get a probiotic product with organoleptic acceptability, composition, and the optimal total lactic acid bacteria (LAB) counts because the presence of salts will affect on the viability of LAB and the cell lysis of LAB and limit its utility in food products. Concentrate of probiotic mung beans was prepared …

Remote Sensing And Geographical Information System To Identify Drought Potency, Puguh Dwi Raharjo

Makara Journal of Technology

Remote Sensing and Geographical Information System to Identify Drought Potency. Kebumen regency was drought in year 2008, community clean water shortages and irrigation water following a decline in water resources. The use of remote sensing data and GIS can be used to identify the potential for drought-prone areas. Transformation of Landsat TM satellite imagery to obtain the brightness index, wetness index and vegetation index used to determine surface conditions in relation to drought. Brightness index and wetness index derived from the tasseled cap modifications, while the vegetation index derived from normalized difference vegetation index (NDVI) values. Other parameters such as …

High Pressure Adsorption Isotherm Of Co2 On Activated Carbon Using Volumetric Method, Awaludin Martin, Bambang Suryawan, Muhammad Idrus Alhamid, Nasruddin Nasruddin

Makara Journal of Technology

High Pressure Adsorption Isotherm of CO2 on Activated Carbon using Volumetric Method. Adsorption system is ones of the most effective methods for CO2 separating with other substances that produced from the burning of fossil fuels. In the design for that application, beside of characteristics of porous material (adsorbent) data, CO2 adsorption data on the adsorbent (kinetic and thermodynamic) are also needed. The aim of this research is resulting isothermal adsorption data at pressures up to 3.5 MPa by indirect methods (volumetric method) at isothermal temperature of 300, 308, 318 and 338 K. Adsorbent that used in this research is activated …

Concept Design And Testing Of Multi-Nozzle Water Mist Fire Suppression System, Danardono A. Sumarsono, Yulianto S. Nugroho, Mariance Mariance, I Gede Wahyu W. Ariasa

Makara Journal of Technology

In this work a flexible design of multi-nozzle arrangement of water mist fire suppression system was studied. The source of fire was a 65 mm diameter cooking oil fire. An investigation on the impact of nozzle arrangement on the temperature profile of fires was conducted. The occurance of oil splash due to the application of water mist was also studied. The water mist systems developed in the present work can effectively extinguish cooking oil fires and prevented them from re-ignition. The spray angle, discharge pressure, and water flow rate were important factors to determine the effectiveness of water mist in …

The Stability Characteristics Of Sandbag Submerged Breakwater, Ferry Fatnanta, Widi Agoes Pratikto, Haryo Dwito Armono, Wahyudi Citrosiswoyo

Makara Journal of Technology

The Stability Characteristics of Sandbag Submerged Breakwater. Breakwater is one of coastal structures to overcome problems of abrasion. Due to difficulties in obtaining rock material at the coastal area. The using of sandbags as a breakwater provides advantages in utilizing local materials. A Sandbag has a smooth surface, so the internal shear forces are relatively small. According to these phenomena, the research for parameters that are expected to affect the stability of the sand bags. These parameters are a slope, shape and formation of sand bags. This experimental research conducted in two dimensional physical model and took place on the …

Static Hand Gesture Recognition Of Indonesian Sign Language System Based On Backpropagation Neural Networks, Farida Asriani, Hesti Susilawati

Makara Journal of Technology

Static Hand Gesture Recognition of Indonesian Sign Language System Based on Backpropagation Neural Networks. The main objective of this research is to perform pattern recognition of static hand gesture in Indonesian sign language. Basically, pattern recognition of static hand gesture in the form of image had three phases include: 1) segmentation of the image that will be recognizable form of the hands and face, 2) feature extraction and 3) pattern classification. In this research, we used images data of 15 classes of words static. Segmentation is performed using HSV with a threshold filter based on skin color. Feature extraction performed …

Characterization Of Inconel 718: Using The Gleeble And Varestraint Testing Methods To Determine The Weldability Of Inconel 718, Nathaniel Oscar Knock

Master's Theses

Nickel based superalloys were developed to withstand the severe thermal and mechanical environment associated with rocket propulsion systems and jet engines. In many alloy systems the strength of a component rapidly deteriorates as the operating temperature increases. Nickel based superalloys, however, retain strength over a range of temperatures which includes the operating range for many propulsion systems. This improved performance is accomplished by a combination of solid-solution strengthening, precipitation strengthening and grain-boundary strengthening. Furthermore, super-alloy systems are designed for ease of fabrication, to include machining, welding and heat treating. Inconel 718 was developed to overcome problems with post-weld cracking that …

Acuta Enews November 2010, Vol 39, No. 11

ACUTA Newsletters

ln This lssue

From ACUTA Headquarters: Relief from Cell Phone Regulations ......Jeri A. Semer, CAE, Executive Dir.

Security ls Not a Game......... Curt Harler

Nominate for ACUTA Board of Directors

Tech Talk: Cyber Security and Collateral Damage........ Kevin Tanzillo, Dux PR

Kansas Universities Get $1.176M Grant from the NSF to Enhance Cyber lnfrastructure

Deadline ls Nov.5 for lnstitutional Excellence Award Nominations

Campus Televideo Releases 2010 Bandwidth and lT Report

PAETEC Provides Catting Service

Learn More about Network Management and Financial lssues without Leaving Your Office

Thanks to Exhibitors and Sponsors at Fall Seminar

Washington Update Newsletter

There ls Still SPIT....................Gary …

Why L2 Topology In Quantum Physics, Chris Culellar, Evan Longpre, Vladik Kreinovich

Departmental Technical Reports (CS)

It is known that in quantum mechanics, the set S of all possible states coincides with the set of all the complex-valued functions f(x) for which the integral of |f(x)|² is 1. From the mathematical viewpoint, this set is a unit sphere in the space L² of all the functions for which this integralis finite. Because of this mathematical fact, usually the set S is considered with the topology induced by L², i.e., topology in which the basis of open neighborhood of a state f is formed by the open balls. This topology seem to work …

Culvert Material Cost Comparison, New England Environmental Finance Center

Water

The following tables provide a detailed look at the role that culvert material and culvert diameter play in the overall cost of a culvert replacement project.

Culvert Material Cost Comparison, New England Environmental Finance Center

Economics and Finance

The following tables provide a detailed look at the role that culvert material and culvert diameter play in the overall cost of a culvert replacement project. Table 1 displays the cost per foot purchase price arranged by diameter size for the various culvert materials that are currently available. Table 2 displays the average additional culvert pipe material cost (increased cost to upsize minus original in-kind replacement cost) that would be incurred when upsizing a given diameter of culvert with a 50 foot length by factors of: 200%, 250% and 300%.

Assessing Value Creation And Value Capture In Digital Business Ecosystems, Ravi S. Sharma, Francis Pereira, Narayan Ramasubbu, Margaret Tan, F. Ted Tschang

Research Collection Lee Kong Chian School of Business

Interest in business modeling of technology enterprises – the activity of designing the architecture for revenues, costs, products and/or services delivery and the overall value of an enterprise – has risen to prominence with the global crossing of the Internet chasm. However, as several studies have pointed out (c.f., Osterwalder, Pigneur & Tucci, 2005; Teece 2010; Zott & Amit, 2010), the investigations of business models and their fit with the strategy of an enterprise, have received little scholarly attention. In this article we formulate a framework, called ADVISOR, for modeling the business strategies of enterprises in the Interactive Digital Media …

Cleanjava: A Formal Notation For Functional Program Verification, Yoonsik Cheon, Cesar Yeep, Melisa Vela

Departmental Technical Reports (CS)

Unlike a Hoare-style program verification, a functional program verification supports forward reasoning by viewing a program as a mathematical function from one program state to another and proving its correctness by essentially comparing two mathematical functions, the function computed by the program and its specification. Since it requires a minimal mathematical background and reflects the way programmers reason about the correctness of a program informally, it can be taught and practiced effectively. However, there is no formal notation supporting the functional program verification. In this paper, we propose a formal notation for writing functional program specifications for Java programs. The …

Power Vs. Performance Evaluation Of Synthetic Aperture Radar Image-Formation Algorithms And Implementations For Embedded Hec Environments (Ongoing Study), Ricardo Portillo, Sarala Arunagiri, Patricia J. Teller

Departmental Technical Reports (CS)

The continuing miniaturization and parallelization of processing hardware has facilitated the development of mobile and field-deployable systems that can accommodate terascale processing within once prohibitively small size and weight constraints. Unfortunately, the added computational capability of these small systems often comes at the cost of larger power demands, an already strained resource in these embedded systems. This study explores the power issues in a specific type of field-deployable system, Mobile Radar. Specifically, we focus on a computationally intensive phase of Synthetic Aperture Radar, Image Formation (IF), and evaluate performance tradeoffs in terms of time-to-solution, output image quality, and power consumption …

A New Answer To Pauli's Question: Almost All Quantum States Can Be Uniquely Determined By Measuring Location And Momentum, Don Jackson, Olga Kosheleva

Departmental Technical Reports (CS)

In classical mechanics, we can uniquely reconstruct the state of each particle by measuring its spatial location and momentum. In his 1958 paper, W. Pauli, one of the founders of quantum mechanics, conjectured that the same should be true in the quantum case as well: that every quantum state can be uniquely determined by measuring spatial location and momentum. This conjecture was disproven: there are pairs of physically different states that cannot be distinguished if we only measure special location and momentum. A natural question is: how frequent are such pairs? In this paper, we show that almost all quantum …

Application Of Differential Evolution To Determine The Hepwm Angles Of A Three Phase Voltage Source Inverter, N Bahari, Z. Salam, Taufik

Electrical Engineering

This paper presents an efficient Differential Evolution (DE) based solution for harmonic elimination pulse-width modulation (HEPWM). The aim is to solve for the set of transcendental equations that determine the switching angles of the HEPWM waveform. The objective function of the DE is designed to minimize (to near zero) the selected harmonics and at the same time allows for the fundamental component of the output voltage to be controlled independently. To verify the method, simulation is carried out using MATLAB simulink. The computed switching angles are applied to a three phase voltage source inverter. Typical results are shown and discussed.

Time Dependent Fixation And Implantation Forces For A Femoral Knee Component: An In Vitro Study, Travis A. Burgers, Jim Mason, Matthew Squire, Heidi-Lynn Ploeg

Mechanical Engineering Faculty Publications

Implant survival rate is a primary concern for individuals receiving a primary total knee arthroplasty. Loosening is the primary reason for revision surgery and was therefore the focus of the current study. To better understand the mechanics of implant fixation, the time-dependent fixation of a femoral knee component was measured in vitro on three cadaveric femurs. The fixation of each femoral knee component was measured with strain gauged implants for at least 10 minutes on each femoral component. Additionally, impaction forces were measured during the implantation of each component. These forces were 2–6 times less than previously reported. The implantation …

Visualization Queries, Nicholas Del Rio, Paulo Pinheiro Da Silva

Departmental Technical Reports (CS)

This paper introduces the notion of a query that describes a visualization request in terms of a universe of concepts, which includes but is not limited to Views, Operators, and Parameters. In the presence of specifications based on these concepts, users may be able to request for what properties they want to see in their visualizations (i.e., the graphical analogues of some dataset) without having to specify how to generate them, and more importantly, without being fully aware of a wide range of toolkit specific implementation details. The result of a query is a visualization that satisfies declarative user-defined criteria …

Development Of A Physical Windkessel Module To Re-Create In Vivo Vascular Flow Impedance For In Vitro Experiments, Ethan Kung, Charles A. Taylor

Publications

To create and characterize a physical Windkessel module that can provide realistic and predictable vascular impedances for in vitro flow experiments used for computational fluid dynamics validation, and other investigations of the cardiovascular system and medical devices. We developed practical design and manufacturing methods for constructing flow resistance and capacitance units. Using these units we assembled a Windkessel impedance module and defined its corresponding analytical model incorporating an inductance to account for fluid momentum. We tested various resistance units and Windkessel modules using a flow system, and compared experimental measurements to analytical predictions of pressure, flow, and impedance. The resistance …

Comparison Of Classical Analytic Hierarchy Process (Ahp) Approach And Fuzzy Ahp Approach In Multiple-Criteria Decision Making For Commercial Vehicle Information Systems And Networks (Cvisn) Project, Liyuan Zhang

Department of Industrial and Management Systems Engineering: Dissertations, Theses, and Student Research

Radio Frequency Identification (RFID) has emerged as an important technology with many possible applications in a wide variety of fields. It is said that RFID can perform well in transportation system. Nebraska Department of Motor Vehicles (NEDMV) is using this technique to perform an analysis on utilizing RFID license plates to assist with Commercial Vehicle Information Systems and Networks (CVISN) program with the cooperation of many other stakeholders. Previous House of Quality (HOQ) analysis evaluates stakeholders’ needs and provides the pairwise comparison values of six important technical requirements for each stakeholder. Based on these, this research aims to seek for …

Nanomanufacturing And Analysis Of Novel Integrated Continuous Nanofibers, John E. Hannappel

Department of Engineering Mechanics: Dissertations, Theses, and Student Research

Complex nanostructured materials have great potential for applications in many areas of nanotechnology. This potential is being unlocked by precise control of their nanoscale architecture and properties. Most current methods of creating these nanostructures are expensive and difficult to control, with the majority of techniques resulting in non-continuous nanostructures and nanoparticles. Electrospinning is an economic nanomanufacturing method resulting in continuous nanofibers. The method consists of spinning fiber-forming liquids in high electric fields. In this work, a modified electrospinning process was analyzed. The process utilized two concentric liquids that resulted in integrated continuous hollow or composite nanofibers. A new adjustable co-axial …

Evaluation Of The Locations Of Kentucky’S Traffic Crash Data, Eric R. Green, Kenneth R. Agent

Kentucky Transportation Center Research Report

This research study evaluated the current accuracy of the location information provided in Kentucky‟s crash data. Since the year 2000, the Kentucky Open Portal System‟s (KYOPS) eCrash form has included latitude and longitude data as well as the more traditional County, Route and Milepoint data (CRMP). The Kentucky Transportation Center conducted a research report in 2004 that evaluated the effectiveness of using latitude and longitude, or GPS, as a means to locate traffic crash data.1 This previous study found that both the CRMP and GPS location data had substantial problems resulting in the location data only being accurate about 50 …

A Study Of The Lyapunov Stability Of An Open-Loop Induction Machine, Ahmed Oteafy, John Chiasson

Electrical and Computer Engineering Faculty Publications and Presentations

The induction motor is widely utilized in industry and exists in a plethora of applications. Until the last 20 years or so, it was primarily used in an open-loop fashion (i.e., balanced sinusoidal voltages, constant load torque and viscous friction) with its inherent stability counted on to allow operation over a wide range of operating conditions. Unlike classical arguments based on the steady-state torque-slip curve, a rigorous analytical stability argument using the full nonlinear dynamical model is presented. In particular, conditions for global asymptotic stability of the induction motor in the sense of Lyapunov are given in terms of the …

Personal Navigation Via High-Resolution Gait-Corrected Inertial Measurement Units, Özkan Bebek, Michael A. Suster, Srihari Rajgopal, Michael J. Fu, Xuemei Huang, M. Cenk Çavu¸So˘Glu,, Darrin J. Young, Mehran Mehregany, Antonie J. Van Den Bogert, Carlos H. Mastrangelo

Mechanical Engineering Faculty Publications

In this paper, a personal micronavigation system that uses high-resolution gait-corrected inertial measurement units is presented. The goal of this paper is to develop a navigation system that uses secondary inertial variables, such as velocity, to enable long-term precise navigation in the absence of Global Positioning System (GPS) and beacon signals. In this scheme, measured zerovelocity duration from the ground reaction sensors is used to reset the accumulated integration errors from accelerometers and gyroscopes in position calculation. With the described system, an average position error of 4 m is achieved at the end of half-hour walks.

Production Of Anatomical Models From Ct Scan Data, John Brennan

Other resources

Rapid Prototyping (RP) technology was conceived in the mid 1980s as a method of manufacturing models, particularly to support the design of new motor vehicles. However as early as 1995 the potential to take data from medical scanners and generate models of patient anatomy to assist clinicians plan complex surgical procedures had been recognised, albeit by researchers rather than the mainstream medical industry. Over the last 15 years the production of preoperative planning models has increased dramatically and moreover, the potential to produce customised implants recognised.

Although RP technology is now established in the medical field work is still on …

Autonomous Underwater Vehicles As Tools For Deep-Submergence Archaeology, Christopher N. Roman, Ian Roderick Mather

Graduate School of Oceanography Faculty Publications

Marine archaeology beyond the capabilities of scuba divers is a technologically enabled field. The tool suite includes ship-based systems such as towed side-scan sonars and remotely operated vehicles, and more recently free-swimming autonomous underwater vehicles (AUVs). Each of these platforms has various imaging and mapping capabilities appropriate for specific scales and tasks. Broadly speaking, AUVs are becoming effective tools for locating, identifying, and surveying archaeological sites. This paper discusses the role of AUVs in this suite of tools, outlines some specific design criteria necessary to maximize their utility in the field, and presents directions for future developments. Results are presented …