Engineering Commons^™

Digital Inpainting Algorithms And Evaluation, Vijay Venkatesh Mahalingam

University of Kentucky Doctoral Dissertations

Digital inpainting is the technique of filling in the missing regions of an image or a video using information from surrounding area. This technique has found widespread use in applications such as restoration, error recovery, multimedia editing, and video privacy protection. This dissertation addresses three significant challenges associated with the existing and emerging inpainting algorithms and applications. The three key areas of impact are 1) Structure completion for image inpainting algorithms, 2) Fast and efficient object based video inpainting framework and 3) Perceptual evaluation of large area image inpainting algorithms.

One of the main approach of existing image inpainting algorithms …

Mesoscopic Methods In Engineering And Science, Alfons Hoekstra, Li-Shi Luo, Manfred Krafczyk

Mathematics & Statistics Faculty Publications

(First paragraph) Matter, conceptually classified into fluids and solids, can be completely described by the microscopic physics of its constituent atoms or molecules. However, for most engineering applications a macroscopic or continuum description has usually been sufficient, because of the large disparity between the spatial and temporal scales relevant to these applications and the scales of the underlying molecular dynamics. In this case, the microscopic physics merely determines material properties such as the viscosity of a fluid or the elastic constants of a solid. These material properties cannot be derived within the macroscopic framework, but the qualitative nature of the …

Remote Controlled Hydrogel Nanocomposites: Synthesis, Characterization, And Applications, Nitin S. Satarkar

University of Kentucky Doctoral Dissertations

There is significant interest in the development of hydrogels and hydrogel nanocomposites for a variety of biomedical applications including drug delivery, sensors and actuators, and hyperthermia cancer treatment. The incorporation of nanoparticulates into a hydrogel matrix can result in unique material characteristics such as enhanced mechanical properties, swelling response, and capability of remote controlled (RC) actuation. In this dissertation, the development of hydrogel nanocomposites containing magnetic nanoparticles/carbon nanotubes, actuation with remote stimulus, and some of their applications are highlighted.

The primary hydrogel nanocomposite systems were synthesized by incorporation of magnetic nanoparticles into temperature responsive N-isopropylacrylamide (NIPAAm) matrices. Various nanocomposite properties …

Novel Approaches In Structured Light Illumination, Yongchang Wang

University of Kentucky Doctoral Dissertations

Among the various approaches to 3-D imaging, structured light illumination (SLI) is widely spread. SLI employs a pair of digital projector and digital camera such that the correspondences can be found based upon the projecting and capturing of a group of designed light patterns. As an active sensing method, SLI is known for its robustness and high accuracy. In this dissertation, I study the phase shifting method (PSM), which is one of the most employed strategy in SLI. And, three novel approaches in PSM have been proposed in this dissertation. First, by regarding the design of patterns as placing points …

Nanoscale Functionalization And Characterization Of Surfaces With Hydrogel Patterns And Biomolecules, Hariharasudhan Chirra Dinakar

University of Kentucky Doctoral Dissertations

The advent of numerous tools, ease of techniques, and concepts related to nanotechnology, in combination with functionalization via simple chemistry has made gold important for various biomedical applications. In this dissertation, the development and characterization of planar gold surfaces with responsive hydrogel patterns for rapid point of care sensing and the functionalization of gold nanoparticles for drug delivery are highlighted.

Biomedical micro- and nanoscale devices that are spatially functionalized with intelligent hydrogels are typically fabricated using conventional UV-lithography. Herein, precise 3-D hydrogel patterns made up of temperature responsive crosslinked poly(N-isopropylacrylamide) over gold were synthesized. The XY control of the hydrogel …

Heterojunctions And Schottky Diodes On Semiconductor Nanowires For Solar Cell Applications, Piao Liu

University of Kentucky Doctoral Dissertations

Photovoltaic devices are receiving growing interest in both industry and research institutions due to the great demand for clean and renewable energy. Among all types of solar cells, cadmium sulfide (CdS) – cadmium telluride (CdTe) and cadmium sulfide (CdS) - copper indium diselenide (CuInSe₂ or CIS) heterojunctions based thin film solar cells are of great interest due to their high efficiency and low cost. Further improvement in power conversion efficiency over the traditional device structure can be achieved by tuning the optical and electric properties of the light absorption layer as well as the window layer, utilizing nano template-assisted …

Concentric Layout, A New Scientific Data Layout For Matrix Data Set In Hadoop File System, Lu Cheng

Electronic Theses and Dissertations

The data generated by scientific simulation, sensor, monitor or optical telescope has increased with dramatic speed. In order to analyze the raw data speed and space efficiently, data preprocess operation is needed to achieve better performance in data analysis phase. Current research shows an increasing tread of adopting MapReduce framework for large scale data processing. However, the data access patterns which generally applied to scientific data set are not supported by current MapReduce framework directly. The gap between the requirement from analytics application and the property of MapReduce framework motivates us to provide support for these data access patterns in …

Fundamental Study Of Mechanical And Chemical Degradation Mechanisms Of Pem Fuel Cell Membranes, Wonseok Yoon

Electronic Theses and Dissertations

One of the important factors determining the lifetime of polymer electrolyte membrane fuel cells (PEMFCs) is membrane degradation and failure. The lack of effective mitigation methods is largely due to the currently very limited understanding of the underlying mechanisms for mechanical and chemical degradations of fuel cell membranes. In order to understand degradation of membranes in fuel cells, two different experimental approaches were developed; one is fuel cell testing under open circuit voltage (OCV) with bi-layer configuration of the membrane electrode assemblies (MEAs) and the other is a modified gas phase Fenton's test. Accelerated degradation tests for polymer electrolyte membrane …

Vaporization Characteristics Of Pure And Blended Biofuel Droplet Injected Into Hot Stream Of Air, Abhishek Saha

Electronic Theses and Dissertations

The combustion dynamics and stability are dependent on the quality of mixing and vaporization of the liquid fuel in the pre-mixer. The vaporization characteristics of different blends of biofuel droplets injected into the air stream in the pre-mixer are modeled in this current study. The focus of this work is on the blended alternate fuels which are lately being considered for commercial use. Two major alternate fuels analyzed are ethanol and Rapeseed Methyl Esters (RME). Ethanol is being used as a substitute for gasoline, while RME is an alternative for diesel. In the current work, the vaporization characteristics of a …

Design And Simulation For Encoded Pn-Ofc Saw Sensor Systems, John Pavlina

Electronic Theses and Dissertations

Surface acoustic wave (SAW) sensors provide versatility in that they can offer wireless, passive operation in numerous environments. Various SAW device embodiments may also be employed for retrieval of the sensed data. Single sensor systems typically use a single carrier frequency and a simple device embodiment since tagging is not required. However, it is necessary in a multi-sensor environment to both identify the sensor and retrieve the information. Overlapping sensor data signals in time and frequency present problems when attempting to collect the sensed data at the receiver. This dissertation defines a system simulation environment exclusive to SAW sensors. The …

Designing Of Energy Efficient Indoor Environments Using A Localized Radial Basis Function Meshless Method, Victor Huayamave

Electronic Theses and Dissertations

Around the world, the energy over consumption issue has been one of the key socio-economic and political challenges, which has drastically worsened over the last few years. Over the years engineers and environmentalists have proposed several approaches to improve energy efficiency. One is to reduce energy demand by improving consumption habits and a second approach is to introduce the use of a "greener" concept by using biomaterials in a diverse and more efficient manner in engineering construction to create energy efficient environments. This work will investigate the effects of using "green" stabilized earth materials to provide and enhance thermal regulation …

Localized Mechanical Deformation And Dissolution Of 45s5 Bioglass, Ding Li

University of Kentucky Doctoral Dissertations

Bioactive glasses react with the human physiological solution in control of their biofunctionality. The stress state in bioactive glasses determines the chemomechanical reaction and their biofunctionality. Using the microindentation technique, the effect of the indentation deformation on the surface damage and material dissolution of 45S5 bioglass was investigated.

The indentation-induced residual stresses were calculated. Complete anelastic recoveries of the indentation depths and the impression marks were observed for the first time, which was likely driven by the stored strain energy over the anelastic deformation zone. The indentation-induced local surface damages were revealed before and after the immersion tests in phosphate …

Synthesis And Characterization Of Magnetic Hydrogel Nanocomposites For Cancer Therapy Applications, Samantha Ann Meenach

University of Kentucky Doctoral Dissertations

Currently, cancer is the second leading cause of death in the United States. Conventional cancer treatment includes chemotherapy, radiation, and surgical resection, but unfortunately, all of these methods have significant drawbacks. Hyperthermia, the heating of cancerous tissues to between 41 and 45°C, has been shown to improve the efficacy of cancer therapy when used in conjunction with irradiation and/or chemotherapy. In this work, a novel method for remotely administering heat is presented. This method involves heating of tumor tissue using hydrogel nanocomposites containing magnetic nanoparticles which can be remotely heated upon exposure to an external alternating magnetic field (AMF). The …

Hardware Certification For Real-Time Safety-Critical Systems: State Of The Art, Andrew J. Kornecki, Janusz Zalewski

Department of Electrical Engineering and Computer Science - Daytona Beach

This paper discusses issues related to the RTCA document DO-254 Design Assurance Guidance for Airborne Electronic Hardware and its consequences for hardware certification. In particular, problems related to circuits’ compliance with DO-254 in avionics and other industries are considered. Extensive literature review of the subject is given, including current views on and experiences of chip manufacturers and EDA industry with qualification of hardware design tools, including formal approaches to hardware verification. Some results of the authors’ own study on tool qualification are presented.

Pilot Source Study: An Analysis Of Pilot Backgrounds And Subsequent Success In Us Regional Airline Training Programs, Guy M. Smith, David A. Newmyer, Elizabeth Bjerke, Mary Niemczyk, Raymond A. Hamilton

Applied Aviation Sciences - Daytona Beach

The 2010 Pilot Source Study, commissioned to research the success of pilots in initial training for Part 121 operations, analyzed the training performance of 2,156 new-hire pilots in the years 2005-2009. Six regional airlines provided data that was mined from human resource and pilot training files. Five university researchers independently analyzed the data and integrated their results. The study expressed success in terms of fewer extra training events and fewer non-completions in regional airline training. Statistically, the best performing pilots were those who had flight instructor certificates, graduated from collegiate accredited flight programs, received advanced (post-Private) pilot training in college, …

On The Effect Of Hydrodynamic Slip On The Polarization Of A Nonconducting Spherical Particle In An Alternating Electric Field, Hui Zhao

Mechanical Engineering Faculty Research

The polarization of a charged, dielectric, spherical particle with a hydrodynamically slipping surface under the influence of a uniform alternating electric field is studied by solving the standard model (the Poisson–Nernst–Planck equations). The dipole moment characterizing the strength of the polarization is computed as a function of the double layer thickness, the electric field frequency, the particle’s surface charge, and the slip length. Our studies reveal that two processes contribute to the dipole moment: ion transport inside the double layer driven by the electric field and the particle’s electrophoretic motion. The hydrodynamic slip will simultaneously impact both processes. In the …

Electro-Osmotic Flow Over A Charged Superhydrophobic Surface, Hui Zhao

Mechanical Engineering Faculty Research

Bubbles can be trapped inside textured structures such as grooves, forming a superhydrophobic surface. A superhydrophobic surface has a large effective hydrodynamic slip length compared to a smooth hydrophobic surface and holds the promise of enhancing electrokinetic flows that find many interesting applications in microfluidics. However, recent theoretical studies suggested that electro-osmotic flows over a weakly charged superhydrophobic surface

the zeta potential of the surface is smaller than the thermal potential (25 mV) can only be enhanced when liquid-gas interfaces are charged [T. M. Squires, Phys. Fluids 20, 092105 (2008); Bahga et al., J. Fluid Mech. 644, 245 (2010)]. So …

The Role Of Energy Storage With Renewable Electricity Generation, Paul Denholm, Erik Ela, Brendan Kirby, Michael Milligan

Publications (E)

Renewable energy sources, such as wind and solar, have vast potential to reduce dependence on fossil fuels and greenhouse gas emissions in the electric sector. Climate change concerns, state initiatives including renewable portfolio standards, and consumer efforts are resulting in increased deployments of both technologies. Both solar photovoltaics (PV) and wind energy have variable and uncertain (sometimes referred to as “intermittent”) output, which are unlike the dispatchable sources used for the majority of electricity generation in the United States. The variability of these sources has led to concerns regarding the reliability of an electric grid that derives a large fraction …

2008 Solar Technologies Market Report, U.S. Department Of Energy

Publications (E)

This report focuses on the U.S. solar electricity market, including photovoltaic (PV) and concentrating solar power (CSP) technologies. The report provides an overview of global and U.S. installation trends. It also presents production and shipment data, material and supply chain issues, and solar industry employment trends. It also presents cost, price, and performance trends; and discusses policy and market drivers such as recently passed federal legislation, state and local policies, and developments in project financing. The final chapter provides data on private investment trends and near-term market forecasts.

Analysis Of Hybrid Hydrogen Systems: Final Report, J. Dean, R. Braun, D. Munoz, M. Penev, C. Kinchin

Publications (E)

This project examined biomass pathways for hydrogen production and how they can be hybridized to support renewable electricity generation. The project considered many potential hybrid systems before narrowing the focus to two. The systems were studied in detail for process feasibility and economic performance. The best-performing system was estimated to produce hydrogen at a cost ($1.67/kg) within range of the Department of Energy target for central biomass-derived hydrogen production, while also providing value-added energy services to the electric grid.

Nrel: A Year In Clean Energy Innovations: A Review Of Nrel's Feature Stories, National Renewable Energy Laboratory

Publications (E)

The National Renewable Energy Laboratory (NREL) is the nation’s primary laboratory for renewable energy and energy efficiency research and development.

NREL’s mission and strategy are focused on advancing the U.S. Department of Energy’s and our nation’s energy goals. The laboratory’s scientists and researchers support critical market objectives to accelerate research from scientific innovations to market-viable alternative energy solutions. At the core of this strategic direction are NREL’s research and technology development competencies. These areas span from understanding renewable resources for energy, to the conversion of these resources to renewable electricity and fuels, and ultimately to the use of renewable electricity …

Wind Powering America: Fy09 Activities Summary, National Renewable Energy Laboratory

Publications (E)

The Wind Powering America FY09 Activities Summary reflects the accomplishments of state Wind Working Groups, WPA programs at the National Renewable Energy Laboratory, and partner organizations.

Measurement And Analysis Of Temperature And Pressure In High Altitude Air Shipments, Sher Paul Singh, Jay Singh, J. Stallings, Gary J. Burgess, K. Saha

Industrial Technology and Packaging

This study was performed (at the request of the FAA) to measure temperature and pressure conditions observed by standard packages in the FedEx Next Day Air network and the environmental conditions of passenger aircrafts. To measure the single parcel environment, two destinations known to be served by non-pressurized feeder and pressurized aircrafts in the USA, San Luis Obispo, California, and Twin Falls, Idaho, were used to represent higher altitude paths. Test packages (0.30 × 0.30 × 0.30 m) containing one MadgeTech PRTemp110 recorder were shipped Priority Overnight by FedEx from East Lansing, Michigan. For 6 weeks, two test packages were …

Measurement And Analysis Of ‘Small’ Packages In Next-Day Air Shipments, Sher Paul Singh, Jay Singh, K. C. Chiang, K. Saha

Industrial Technology and Packaging

Packaged goods are shipped globally using various means of transportation. Over the past two decades, there has been a continuous increase in studies that measure and analyze dynamic events that occur to packages during transportation and handling. These data offer useful information to design and test packages, and provide protection from potential hazards like drops and impacts. However, none of the past studies are directed towards single packages regarded as 'smalls'. 'Smalls' or small-package product systems are defined as those with volume of less than 0.013 m³, a longest dimension of 0.356 m and a weight of 4.54 …

E.J. Gallo Winery Spirit-Makers Facility, Aaron Pickar

Industrial and Manufacturing Engineering

With growing demand for E.J. Gallo spirit brands, the cramped and cluttered facility allocated to the spirit-makers does not provide an adequate work environment to design and test new hard alcohols. E.J. Gallo Winery wants to relocate the spirit-makers to a new facility located near the brandy production floor for under 200,000 dollars. In order to do this, a revised systematic approach to facility design is used.

In this process, the departments are first defined, then the relationships between these departments and the space requirements are documented. Once these planning steps are complete, alternative layouts are constructed and analyzed until …

Implementing Rfid To Improve Animal Shelter Inventory And Allocation, Adam Mach

Industrial and Manufacturing Engineering

The purpose of this project is to observe the best way to incorporate Radio Frequency Identification (RFID) technology into the animal inventory system present in animal shelters, while also observing the benefits of implementing this system. The Woods Humane Society was used in this project as a sample animal care facility that could benefit from this application.

Many RFID systems can be observed in other industries, but very few examples this technology exist in animal shelters or smaller animal care facilities. Part of the reason for that is because funds are scarce at most animal care facilities, like the Woods …

Design And Manufacture Of Tennis Ball Retriever, Philip Hurst

Industrial and Manufacturing Engineering

No abstract provided.

Freeform Reflector Design With Extended Sources, Florian Fournier

Electronic Theses and Dissertations

Reflector design stemmed from the need to shape the light emitted by candles or lamps. Over 2,000 years ago people realized that a mirror shaped as a parabola can concentrate light, and thus significantly boosts its intensity, to the point where objects can be set afire. Nowadays many applications require an accurate control of light, such as automotive headlights, streetlights, projection displays, and medical illuminators. In all cases light emitted from a light source can be shaped into a desired target distribution with a reflective surface. Design methods for systems with rotational and translational symmetry were devised in the 1930s. …

Quantum Dot Based Mode-Locked Semiconductor Lasers And Applications, Jimyung Kim

Electronic Theses and Dissertations

In this dissertation, self-assembled InAs/InGaAs quantum dot Fabry-Perot lasers and mode-locked lasers are investigated. The mode-locked lasers investigated include monolithic and curved two-section devices, and colliding pulse mode-locked diode lasers. Ridge waveguide semiconductor lasers have been designed and fabricated by wet etching processes. Electroluminescence of the quantum dot lasers is studied. Cavity length dependent lasing via ground state and/or excited state transitions is observed from quantum dot lasers and the optical gain from both transitions is measured. Stable optical pulse trains via ground and excited state transitions are generated using a grating coupled external cavity with a curved two-section device. …

Electro-Optical And All-Optical Switching In Multimode Interference Waveguides Incorporating Semiconductor Nanostructures, Nathan Bickel

Electronic Theses and Dissertations

The application of epitaxially grown, III-V semiconductor-based nanostructures to the development of electro-optical and all-optical switches is investigated through the fabrication and testing of integrated photonic devices designed using multimode interference (MMI) waveguides. The properties and limitations of the materials are explored with respect to the operation of those devices through electrical carrier injection and optical pumping. MMI waveguide geometry was employed as it offered advantages such as a very compact device footprint, low polarization sensitivity, large bandwidth and relaxed fabrication tolerances when compared with conventional single-mode waveguide formats. The first portion of this dissertation focuses on the characterization of …