Engineering Commons^™

The Effectiveness Of The Natural Resource Conservation Service (Nrcs) And Huff Rainfall Distribution Methods For Use In Detention Basin Design, Todd Wayne Dablemont

Masters Theses

"This thesis focuses on the effectiveness of the NRCS and Huff rainfall distribution methods for use in detention basin design. This study required the use of HEC-HMS, hydrologic modeling software, in order to analyze the distribution methods. Three separate detention basins and their watersheds were modeled for this study. The watersheds were analyzed for both undeveloped and developed conditions. The parameters analyzed include detention basin inflow, detention basin outflow, watershed peak discharge, and detention basin storage capacity. The determination of detention basin effectiveness was based upon these parameters. The NRCS distribution method is widely used; however, many who use it …

Integration And Test Of A Refrigerant-Based Cold-Gas Propulsion System For Small Satellites, Ryan Alan Pahl

Masters Theses

"Due to the launch safety constraints placed on university-built small satellites, designing a low-cost propulsion system to meet mission requirements presents a significant challenge to aspiring student engineers. The Missouri University of Science and Technology is currently developing a low-cost, two-phase propulsion system using the refrigerant R-134a as the propellant that can be stored at low pressures while still providing sufficient performance to meet mission goals. The purpose of this study is to present the testing results of a refrigerant-based cold gas system utilizing R-134a as a saturated liquid propellant and the ability to design this system to be portable …

Fpga Implementation Of Pso Algorithm And Neural Networks, Parviz Palangpour

Masters Theses

"This thesis describes the Field Programmable Gate Array (FPGA) implementations of two powerful techniques of Computational Intelligence (CI), the Particle Swarm Optimization algorithm (PSO) and the Neural Network (NN). Particle Swarm Optimization (PSO) is a popular population-based optimization algorithm. While PSO has been shown to perform well in a large variety of problems, PSO is typically implemented in software. Population-based optimization algorithms such as PSO are well suited for execution in parallel stages. This allows PSO to be implemented directly in hardware and achieve much faster execution times than possible in software. In this thesis, a pipelined architecture for hardware …

Microalgal Bioremediation Of Nutrients In Wastewater And Carbon Dioxide In Flue Gas, Anand Murali Narasimhan

Masters Theses

"Microalgae are potential biofuel feedstocks that can provide solutions to the twin challenges of energy security and environmental pollution. They have great potential for the removal of excess nitrogen and phosphorus from wastewater including the farm runoff. They can capture carbon dioxide in the flue gas from coal fired power plants thereby reducing greenhouse gas and also producing algal biomass, which can be converted into biofuel. In this study, the nutrient consumption of Scenedesmus algae was investigated in a batch culture and the biomass yield was determined. Algae were able to utilize carbon in the form of soluble carbonates which …

Quantification Of Product Color Preference In A Utility Function, Hannah L. Turner

Masters Theses

"Currently, many marketing and engineering tools exist to help a designer optimize quantitative attributes of a product, such as height, weight, volume, or cost. However, these methods cannot effectively take into consideration aesthetic attributes of a product, or any other attributes for which there is no understood functional relationship between the attribute's potential values and the consumer's preference. This research has begun the work of developing this necessary functional relationship for the aesthetic attribute of color and has created a methodology for further research. To do this, colors were represented by their red, green, and blue light components, and preference …

Energy Expenditure Analysis Of Redesigned Mechanical Assists For Medium Girder Bridge, Karthik Kumar

Masters Theses

"U.S. Army bridge crew soldiers perform tough manual material handling (MMH) tasks during the assembly of a Medium Girder Bridge (MGB). The bridge parts are very heavy and are manually lifted from pallets, carried to the construction site and assembled with other bridge parts. An energy expenditure study on the soldiers handling the bridge parts revealed that the energy expenditure rate of the soldiers exceeds the NIOSH prescribed safety limit of 3.5 Kcal/min. This leads to high risk of musculoskeletal disorders. The study deals with modifying the first redesign of mechanical assists for medium girder bridge (MGB) and studying the …

Control And Applications Of Double Input Dc-Dc Power Electronic Converters, Venkata Anand Kishore Prabhala

Masters Theses

"Multi-input power electronic converters (MIPEC) are increasingly gaining interest in the fields of renewable energy systems and hybrid electric vehicles (HEV). The main advantage of MIPECs is their ability to interface several energy sources and storage devices using a single power conversion stage. Therefore, they provide simpler control and smaller parts count. In this thesis, various aspects of the utilization of double-input (DI) converters in solar and HEV applications are explored. For instance, a DI buckboost topology is proposed for a photovoltaic (PV)/battery energy system. The converter is controlled in a way that maximum power is drawn from the PV …

A Comparative Study Of Capacitor Voltage Balancing Techniques For Flying Capacitor Multi-Level Power Electronic Converters, Vennela Yadhati

Masters Theses

"With the advent of multilevel converters for high power applications in industry, a need to develop simpler topologies and control techniques has arisen. The flying capacitor multilevel inverter (FCMLI) is one such topology which is gaining popularity in recent years with many advantages such as extra ride-through capabilities because of the capacitor storage, redundancy in switching states, low common mode voltage ratio, improved power quality, etc. In this thesis, different basic multilevel converter topologies and their advantages and applications are discussed. The thesis mainly focuses on single-phase five-level FCMLI topology. Different control techniques for capacitor voltage regulation like staircase modulation, …

Improving Resiliency Using Graph Based Evolutionary Algorithms, Jayakanth Jayachandran

Masters Theses

"Resiliency is an important characteristic of any system. It signifies the ability of a system to survive and recover from unprecedented disruptions. Various characteristics exist that indicate the level of resiliency in a system. One of these attributes is the adaptability of the system. This adaptability can be enhanced by redundancy present within the system. In the context of system design, redundancy can be achieved by having a diverse set of good designs for that particular system. Evolutionary algorithms are widely used in creating designs for engineering systems, as they perform well on discontinuous and/or high dimensional problems. One method …

Signal Analysis For Multiple Target Materials Through Wavelet Transforms, Rajat Pashine

Masters Theses

"Signal identification based on different sensing systems like microwaves, infra-red, x-rays and terahertz waves is one of the classic problems in signal processing. Earlier methods had relied mainly on the amplitude spectrum obtained by these sensing techniques mainly due to non-availability of the phase information for the signals. Most of them are based on techniques like absorbance spectrum that requires a reference material's signal for the test material's identification. They are also sensitive to noise and highly dependent on the peak detection algorithms. Modern equipments with both amplitude and phase information provide an opportunity for time-domain signal based methods that …

Implementing Frequency Regulation Capability In A Solar Photovoltaic Power Plant, Venkata Ajay Kumar Pappu

Masters Theses

"Photovoltaic power plants pose some challenges when integrated with the power grid. Today's PV plants focus on extracting the maximum power from the arrays. This makes the PV system unavailable for helping in regulating the grid frequency as compared to conventional synchronous generators. A new technique for tracking a pseudo-maximum power point for creating power reserve is presented. This will help provide fast response in injecting power to respond to rapid load changes in a manner analogous to the inertia of a rotating machine. This helps in contributing toward frequency regulation. This thesis examines the implementation of a two stage …

Application Of Life Cycle Assessment To Estimate Environmental Impacts Of Surface Coal Mining, Ofentse Ditsele

Masters Theses

"Coal plays an important role in meeting the energy needs of the World. Given its abundance and low cost, its use is bound to increase with the growing energy demand. Despite its importance, there are concerns over coal's environmental burdens. In order to extract and use coal in a sustainable manner, sustainability assessment has to be comprehensive. Life Cycle Assessment (LCA) provides systematic and quantifiable measures for assessing environmental burdens of products and processes. Extensive LCA work has been done on coal use, particularly in electricity generation, but, the coal mining stage has been neglected, for the most part. This …

Simulation Of Pem Fuel Cells: Validation Of Model And Incorporation Of Humidity Dynamics, Steven Francis Rodgers

Masters Theses

"Fuel cell technologies have been receiving increased attention by industry and researchers due to growing societal and inevitable economic pressures to find an alternative for fossil fuels. At the forefront of this is the demand for fuel cell models: models to elucidate fundamental physical phenomena underlying fuel cell function and models that are not computationally demanding yet reasonably accurate to allow designers to incorporate fuel cells into consumer products. One of the latter type has recently been developed based on a software package that is already in widespread use in the automotive industry for the simulation of mechanical, thermal, electrical, …

Finite Element Analysis And Fatigue Test On The Bicuspids To Support Theory Of Abfraction, Madhuchandra Mahadevaswamy

Masters Theses

"Abfraction is a small crack or notch found at the cervical areas of a teeth due to the loss of enamel tissues in the teeth. Proposed explanations for are that it is caused by toothbrush abrasion, acid erosion, and the mechanical forces applied on the teeth due to chewing, biting, tongue activity. There is disagreement among dentists as to the primary causes of abfraction. Some dentists believe that abfraction is caused by toothbrush abrasion and erosion due to acidic food and drinks. Other dentists believe that tensile and compressive forces acting on the teeth from non-axial, cyclical loading over an …

Evaluation Of Metal Detection Audio Alert Signals Of An/Pss-14 By Means Of Real Time Visualization, Sandesh Srikantaiah Chandrashekar

Masters Theses

"The sweep arm of the AN/PSS-14 Landmine Detector attached to an independent visualization device will transform the AN/PSS-14 into a hand-held data acquisition system for conversion of real time MD and GPR audio alert signals into captured visual trace displays on an on-board PDA computer screen so that momentary sounds of millisecond durations can be captured and displayed for visual scrutiny and interpretation by analytical on-board data processing procedures. This is a part of a two-man team that is developing a visual data adapter for the AN/PSS-14 Landmine Detector where the current thesis is concentrating only on MD audio alerts. …

Solid State Fault Interruption Devices In Medium Voltage Distribution Systems With Distributed Generators, Mehul Kiran Madan

Masters Theses

"Faults in electric power grids often result in long term interruption of electricity supply. The frequent and the sudden occurrences of faults undermine the reliability and continuity of electric networks. However, the new age digital economy demands a continuous supply of electricity of high power quality. This demand of continuous supply and the effort to increase the penetration of renewable power sources into the electric grid has led to a need of highly efficient and flexible systems with the ability to provide power of very high quality. The solid state fault interruption device (SSFID) is one amongst those devices. It …

Zinc Iron Phosphate Glasses For Enameling Applications, Sagnik Saha

Masters Theses

"New compositions of low temperature black glasses were developed that are suitable as frits for enameling soda-lime silicate (S-L-S) glass substrates. Zinc iron phosphate glasses are of interest for this application because they possess dilatometric low softening points (under 600ºC) and have coefficients of thermal expansion that are compatible with S-L-S glass (in the range 90-110x10⁻⁷/ºC). The development of compositions with excellent chemical durability, particularly in acidic conditions, is also desired. Compositional modification were made to the (Na₂O+K₂O)·ZnO·MnO·Fe₂O₃·P₂O₅ glass system using design of experiments. The compositional boundaries used in the design were based on earlier work at Missouri S&T. The …

Standoff Raman Spectroscopy Detection Of Trace Explosives, Abhijeet Singh

Masters Theses

"During the 2003-present Iraq war, Improvised Explosive Devices (IEDs) are being used extensively by the terrorists against the coalition forces and these IEDs were responsible for 40% of coalition force casualties, by the end of 2007. As these IEDs are not based on standard production formulae, their tracking and detection becomes extremely complicated. Laser Induced Breakdown Spectroscopy (LIBS) and Raman Spectroscopy are among the many techniques that have shown promise in detection of explosive compounds. However, the performance of these systems is dependent on the concentration of explosives and ambient noise.

The research presented in this thesis applies signal processing …

A Real-Time Visualization Of An/Pss-14 Audio Alert Signals For Land Mine Detection Validation, Nitin Kolekar

Masters Theses

"The central idea of the current research is visualization of audio alerts from AN/PSS-14. A visualization device connected to the arm of PSS-14 will show real-time display of MD and GPR Audio Alert signals from PSS-14. This visualization device displays both amplitude-time and spectral frequency-time formats of the signals. The latter format achieves visual separation of combined, simultaneous, MD and GPR alerts. The joint occurrence of MD and GPR signals in a specific time window confirms the presence of landmine. This window is defined by the time of occurrence of MD peak and time of occurrence GPR diffraction from onset …

Thermodynamic Based Modeling For Nonlinear Control Of Combustion Phasing In Hcci Engines, Joshua Bradley Bettis

Masters Theses

"Low temperature combustion modes, such as Homogeneous Charge Compression Ignition (HCCI), represent a promising means to increase the efficiency and significantly reduce the emissions of internal combustion engines. Implementation and control are difficult, however, due to the lack of an external combustion trigger. This thesis outlines a nonlinear control-oriented model of a single cylinder HCCI engine, which is physically based on a five state thermodynamic cycle. This model is aimed at capturing the behavior of an engine which utilizes fully vaporized gasoline-type fuels, exhaust gas recirculation and intake air heating in order to achieve HCCI operation. The onset of combustion, …

Dynamic Networking For Programmable Logic Controller Communication, Richard Andrew Hardison

Masters Theses

"This thesis confronts the issue of set path communication in Programmable Logic Controllers (PLCs). In order to increase reliability in a networked automated process, it is necessary to develop a dynamic method of communication between PLCs. Three methods for dynamic messaging in PLCs are explored in this work. These methods are based on the real-time reconfiguration of message paths when communication fails on the originally configured path. The simplest method involves replacing the original message block with an Add-On Instruction (AOI) which can accept multiple communication paths and has the ability to switch between these paths to maintain communication. A …

Explosives Recognition And Awareness Training: A Psychological Approach To Pre-Blast Mitigation, James Wade Hawkins

Masters Theses

"The nation's security strategy tends to be reactionary to a specific event. It is rare when established policies have proven successful, even though there is substantial financial and resource investment. The payoff is measured by analyzing the desired minimal effect rather than prevention of the event altogether. Such is the case in combating explosives-related threats. Today, research and development, science and technology, are plugged as the saviors of a post-blast event. Synthetic and composite materials are used to strengthen barriers and cutting-edge technology is utilized to refine the latest in standoff detection. These legitimate measures provide a sense of security …

Graded-Index Fiber Collimator Enhanced Extrinsic Fabry-Perot Interferometer, Yinan Zhang

Masters Theses

"In this thesis, we studied a fringe visibility enhanced extrinsic Fabry-Perot interferometer (EFPI) by fusion splicing a quarter-pitch graded-index fiber (GIF) fiber to the lead-in single-mode fiber (SMF). The performance of the GIF collimator is theoretically analyzed using a ray matrix model and experimentally verified through beam divergence angle measurements. The fringe visibility of the GIF-collimated EFPI is measured as a function of the cavity length and compared with that of a regular SMF-EFPI. At the cavity length of 500µm, the fringe visibility of the GIF-EFPI is 0.8 while that of the SMF-EFPI is only 0.2. The visibility enhanced GIF-EFPI …

The Study Of A Model For Via Transition And The Multi-Layer Via Transition Tool Gui Design, Ketan Shringarpure

Masters Theses

"One of the many challenges faced by engineers working with the present design scenario is to estimate the extent to which a signal, with significant high frequency content, is affected when it is routed on a printed circuit board. The printed circuit board routing will include the transition through the geometries like micro-strip or strip-line transmission lines, via transitions, and irregularities or asymmetries in the aforementioned geometries. One of these discontinuities, the via transition, results in the interaction of the signal on the via and the cavity (plane-pair) through which it passes. The via transition modeling will help characterize a …

Doubly Fed Induction Generator With Integrated Energy Storage System For Smoothening Of Output Power, Nishant Swaraj Chouhan

Masters Theses

"Wind energy is one of the fastest growing renewable energies in the world today. However, integration of wind power into the power system network is still confronting many challenges. One of the main challenges is the suppression of wind power fluctuations. This thesis focuses on integration of wind power with energy storage to overcome the integration challenges. The first part of this thesis investigates the suitability of energy storage systems for transmission, distribution and wind farm applications. A review on the available energy storage systems is performed considering several criteria. Efforts are made to investigate solutions that meet all the …

Modeling The Practical Performance Of Switched-Capacitor Converters And A Method For Automating State-Space Model Generation, Jordan M. Henry

Masters Theses

"A new modeling technique and a method for automating the modeling process are introduced for analyzing complex switched-capacitor (SC) converters. The model uses conventional circuit analysis methods to derive state-space models of each switching state. Steady-state performance is derived and expressed as an equivalent resistance. Whereas previous techniques have provided either the detailed performance of a simple SC converter or the limiting performance of a complex SC converter, this new model is flexible enough to provide detailed performance for any practical converter. Nonuniform component choices, asymmetric duty cycles, and other deviations from an ideal converter can be readily included. Dynamics …

Controlling Strength And Permeability Of Silica Investment Casting Molds, Darryl M. Kline

Masters Theses

"Investment casting is a metal casting process in which a ceramic mold is created around a disposable pattern using dip coating. The fine silica flour making up most of the mold gives the benefits of a smooth internal mold surface and high density. The high density allows for investment casting molds to be thinner and lighter than sand-based molds, but gives substantially smaller gaps between particles for air flow. This research focused on the design and improvement of the formulation for making investment casting molds with customizable physical properties. Properties of the molds, specifically flexural strength, permeability, and physical structure, …

Reverberation Reduction In A Room For Multiple Positions, Raghavendra Ravikumar

Masters Theses

"Reverberation in a room occurs when the direct path sound from a sound source undergoes multiple reflections from the walls of the room before reaching the listener. An impulse response of the room can be measured called the room impulse response (RIR) which captures the effects of the room. This can be represented digitally on a computer. A filter is designed to cancel the effects of the room using the information in the room impulse response. This filter is called an equalization filter and is usually placed between the source signal and loudspeaker to perform the equalization. The RIR changes …

Quantification Of Uncertainty In Aerodynamic Heating Of A Reentry Vehicle Due To Uncertain Wall And Freestream Conditions, Benjamin R. Bettis

Masters Theses

"The primary focus of this study is to demonstrate an efficient approach for uncertainty quantification of surface heat flux to the spherical non-ablating heatshield of a generic reentry vehicle due to epistemic and aleatory uncertainties that may exist in various parameters used in the numerical solution of hypersonic, viscous, laminar blunt-body flows with thermo-chemical non-equilibrium. Two main uncertainty sources were treated in the computational fluid dynamics (CFD) simulations: (1) aleatory uncertainty in the freestream velocity and (2) epistemic uncertainty in the recombination efficiency for a partially catalytic wall boundary condition. The Second-Order Probability utilizing a stochastic response surface obtained with …

Measuring Blast Induced Rock Damage From Pre-Splitting Sandstone By Applying The Multichannel Analysis Of Surface Waves Geophysical Method, Charles Bradford Zdazinsky

Masters Theses

"Many blasting applications in the mining industry demand that the hard rock being blasted remains structurally competent. For example, pre-splitting is a common technique to reduce fracturing, and operators of dimension stone quarries use this blasting method to eliminate overbreak. When pre-split design parameters are not applied correctly, there will be a redistribution of stresses within the rock, resulting in Blast Induced Rock Damage (BID). Advances in geophysical technology are enabling blast technicians to monitor BID and then use the results to correctly design their blasts. The Multichannel Analysis of Surface Waves (MASW) geophysical method is new technology that is …