Engineering Commons^™

Interactive Computational Tool For Simulation Of Dynamic Response And Damage In Composite Structures, Tezeswi P. Tadepalli, Christopher L. Mullen

Early Career Technical Journal (ECTJ)

Proceedings of the ASME Early Career Technical Conference, October 1-2, 2010. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, Georgia

pp. 105-111

Flowchart Visual Programming In Mechatronics Course, Vidya K. Nandikolla, Suhas S. Pharkute

Early Career Technical Journal (ECTJ)

Proceedings of the ASME Early Career Technical Conference, October 1-2, 2010. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, Georgia

pp. 118-123

Adaptive Multi Airbag Shoe Insert For Diabetic Foot Care, Vidya K. Nandikolla, Jenna Matthews, Marco P. Schoen, Suhas S. Pharkute, Uwe Reischl, Ajay Mahajan

Early Career Technical Journal (ECTJ)

Proceedings of the ASME Early Career Technical Conference, October 1-2, 2010. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, Georgia

pp. 124-129

Cfd Simulation Of Thermal Stratification In Pressurizer Surge Line, Faisal Asfand

Early Career Technical Journal (ECTJ)

Proceedings of the ASME Early Career Technical Conference, October 1-2, 2010. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, Georgia

pp. 112-117

Design Approach To Fire Life Safety In Tunnels Through The Use Of Subway Environment Simulation Software, Bradley L. Zundel

Early Career Technical Journal (ECTJ)

Proceedings of the ASME Early Career Technical Conference, October 1-2, 2010. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, Georgia

pp. 130-137

Method To Accurately Estimate Tesla Turbine Stall Torque For Dynamometer Or Generator Load Selection, Tamir A. Emran, Ryan C. Alexander, Chris T. Stallings, Mark A. Demay, Matthew J. Traum

Early Career Technical Journal (ECTJ)

Proceedings of the ASME Early Career Technical Conference, October 1-2, 2010. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, Georgia

pp. 158-164

A Comparative Study Of Segmented Tungsten Rod Penetration Into A Thick Steel Target Plate, Michael B. Presnell, Arunachalam M. Rajendran

Early Career Technical Journal (ECTJ)

Proceedings of the ASME Early Career Technical Conference, October 1-2, 2010. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, Georgia

pp. 153-157

Trajectory Planning Of 3r Robotic Arm Using Genetic Algorithm (Ga) And Artificial Bee Colony (Abc) Optimization Methods, Poonam V. Savsani, Hemant Nagarsheth

Early Career Technical Journal (ECTJ)

Proceedings of the ASME Early Career Technical Conference, October 1-2, 2010. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, Georgia

pp. 138-145

Efficient Continuous-Time Optimization, Dale B. Mcdonald

Early Career Technical Journal (ECTJ)

Proceedings of the ASME Early Career Technical Conference, October 1-2, 2010. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, Georgia

pp. 165-172

Preliminary Investigation Of A Chemical Heat Engine For Solar Energy Applications, Matthew Turk, Ryan Melsert, Sheldon Jeter, Hany Al Ansary

Early Career Technical Journal (ECTJ)

Proceedings of the ASME Early Career Technical Conference, October 1-2, 2010. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, Georgia

pp. 198-202

A Novel Strategy For Nonlinear Closure In Proper Orthogonal Decomposition Reduced-Order Models, Imran Akhtar, Zhu Wang, Jeff Borggaard, Traian Iliescu

Early Career Technical Journal (ECTJ)

Proceedings of the ASME Early Career Technical Conference, October 1-2, 2010. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, Georgia

pp. 189-197

An Experimental Study For Flexural Properties Of 22- And 32-Ply Honeycomb Composite Panels Im7/8552, Michael Hempowicz, Gail D. Jefferson, Kuang-Ting Hsiao, N Gaston

Early Career Technical Journal (ECTJ)

Proceedings of the ASME Early Career Technical Conference, October 1-2, 2010. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, Georgia

pp. 178-180

Doe Investigation Into The Diminishing Effect Of Applied Mean Stress And Bending Stress On The High Cycle Fatigue Behavior Of A Threaded Fastener, Brian S. Munn

Early Career Technical Journal (ECTJ)

Proceedings of the ASME Early Career Technical Conference, October 1-2, 2010. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, Georgia

pp. 208-214

Computer-Aided Product And Process Development Of Lace Braided Composites, David J. Branscomb, David G. Beale, Royall M. Broughton Jr

Early Career Technical Journal (ECTJ)

Proceedings of the ASME Early Career Technical Conference, October 1-2, 2010. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, Georgia

pp. 215-220

Damage Evaluation Of Braided Kevlar®/Carbon/Epoxy Composite Beams In Three Point Bending With Infrared Thermography, David J. Branscomb, Idris Cerkez

Early Career Technical Journal (ECTJ)

Proceedings of the ASME Early Career Technical Conference, October 1-2, 2010. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, Georgia

pp. 221-225

A New Single Transient Technique To Measure Film Cooling Performance: Gas Turbine Application, Mohamed G. Ghorab

Early Career Technical Journal (ECTJ)

Proceedings of the ASME Early Career Technical Conference, October 1-2, 2010. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, Georgia

pp. 226-233

Ab-10-018: The Effects Of Noise From Building Mechanical Systems With Tonal Components On Human Performance And Perception (1322-Rp), Erica E. Ryherd, Lily M. Wang

Durham School of Architectural Engineering and Construction: Faculty Publications

This study investigated the effects of noise from building mechanical systems with tonal components on human task performance and perception. Six different noise conditions based on in-situ measurements were reproduced in an office-like setting; all were set to approximately the same sound level (47 dBA) but could have one particular tonal frequency (120 Hz, 235 Hz, or 595 Hz) at one of two tonal prominence ratios (5 or 9). Thirty participants were asked to complete typing, grammatical reasoning, and math tasks plus subjective questionnaires, while being exposed for approximately 1 hour to each noise condition. Results show that the noise …

Ab-10-017: Combined Effects Of Noise And Temperature On Human Comfort And Performance (1128-Rp), Dale Tiller, Lily M. Wang, Amy Musser, Matthew Radik

Durham School of Architectural Engineering and Construction: Faculty Publications

This paper summarizes results from an experiment designed to investigate the combined effects of noise and temperature on human thermal comfort and task performance. Thirty subjects (16 females, 14 males) were exposed to all combinations of five thermal conditions (PMV +1 [79.6°F:26.4°C], PMV +0.5 [75.8°F:24.3°C], PMV 0 [72.1°F:22.3°C], PMV -0.5 [68.3°F:20.2°C], and PMV -1 [64.6°F:18.1°C]), three RC noise levels (RC-30, RC-40, and RC-50), and two sound qualities (neutral and rumbly): all sounds mimicked noise from building ventilation systems. After a one-hour adaptation period at each condition, subjects rated their thermal comfort using the ASHRAE Thermal Comfort Scale and the Tenant …

Ab-10-019: Human Performance And Perception-Based Evaluations Of Indoor Noise Criteria For Rating Mechanical System Noise With Time-Varying Fluctuations (1322-Rp), Lily M. Wang, Cathleen C. Novak

Durham School of Architectural Engineering and Construction: Faculty Publications

The goal of this study was to investigate the effects of noise from building mechanical systems with time-varying fluctuations on human task performance and perception, and to determine how well current indoor noise rating methods account for this performance and perception. Six different noise conditions with varying degrees of time-varying fluctuations, many focused in the low frequency rumble region, were reproduced in an office-like setting. Thirty participants were asked to complete typing, grammatical reasoning, and math tasks plus subjective questionnaires, while being exposed for approximately one hour to each noise condition. Results show that the noise conditions with higher sound …

Phase Equilibria In Iron Phosphate System, Liying Zhang

Doctoral Dissertations

"The main objectives of this research were to synthesize iron phosphate compounds, study phase equilibria in the iron phosphate system, focusing on the glass forming area, and investigate glass formability and properties based on the liquidus regions. Twelve iron phosphate compounds were successfully prepared and studied in terms of liquidus temperature or decomposition behavior. The liquidus surface of the Fe₃PO₇- Fe(PO₃)₃ system was re-determined and found to be significantly different from that originally presented by Wentrup in 1935. Eutectic points exist at 58.0 mole% Fe₂O₃ (1070⁰C), 42.7 mole% Fe₂O₃ (925°C), and 37.0 mole% Fe₂O₃ (907°C). The latter two eutectic points …

Solid Oxide Fuel Cell Electrode Characterization And Improvement For Fuel Flexibility And Supplemental Power Production, Isaiah D. Kellogg

Doctoral Dissertations

"Solid oxide fuel cells (SOFC) were fabricated and the electrodes tested for their individual catalytic effectiveness in various fuels by exposing each electrode to mixed gas while the opposite electrode was exposed to its respective pure gas. Mixed hydrogen and oxygen gas was successfully utilized as fuel in a single chamber SOFC (SC-SOFC). The conditions at which the porous nickel-yttria-stabilized zirconia (Ni-YSZ) cermet anode performed well did not significantly overlap the conditions at which the La₀.₈Sr₀.₂Fe₀.₈Co₀.₂ oxide (LSCF) cathode performed well, but there was significant catalytic activity at both electrodes which increased the open circuit voltage (OCV) beyond that predicted …

Experimental Study On Thermal Treatment Of Used Printed Wiring Boards (Pwbs), Xiangjun Zuo

Masters Theses

The availability of cheaper and better electronic products as a result of the rapid innovation in technology in past decades has driven the production of e-waste forward. Printed wiring board (PWB) is a component made of one or more layers of insulating material with electrical conductors. The existing processes of recycling PWBs use pyrometallurgical or hydrometallurgical methods, which generate atmospheric pollution. Green recycling has obvious benefits to decrease the amount of PWBs. Green recycling includes two features, 1) little or zero pollution of toxic gases and heavy metals, and 2) efficient (quick and economical) recycling.

The aim of this work …

Maskless Additive Manufacturing Of Micro Structures By Laser Sintering Of Nanoparticles, Vivekram Ramanathan

Masters Theses

"The focus of this study was to investigate an alternate microfabrication process of sintering nanoparticles using a patterned laser light to generate two dimensional (2D) and three dimensional (3D) geometries. With trends of producing electronic and medical devices using cheaper and faster technologies, a new procedure was developed to deposit and bond miniature patterns of silver nanoparticles onto silicon substrates.

The process consists of spraying silver nanoparticles onto the substrate while a patterned or modulated laser beam is focused onto the sprayed nanoparticles. These nanoparticles exposed under the modulated laser light undergo partial melting or sintering and adhere to the …

Decentralized Coordinated Ilc System Design And Transient Growth Control Using Iteration-Varying Filter, Qing Liu

Masters Theses

"In automation control area, with the increasing demand in task complexity and high control precision, coordination between systems is required. There are mainly two types of coordinated systems, decentralized and centralized. This thesis is focused on a large array of coordinated systems, and the decentralized structure is preferred. To achieve high control precision in a coordinated system, many existing approaches may work, and in the system performing the repeating process, Iterative Learning Control (ILC) is a useful approach. Therefore, in this thesis, a decentralized coordinated ILC system is proposed and analyzed. The proposed control system is especially useful in coordinating …

Detection Of Explosive Threats By Using Embedded Wireless Sensor Based Networks, Jake Daniel Hertenstein

Masters Theses

"This thesis focuses on the development of novel schemes for the detection of unintended electromagnetic emissions (UEE) from passive radio frequency (RF) receivers and chemical and biological (CB) agents for the purpose of locating explosive threats (ET) to improve survivability for equipment and personnel in the surrounding environment. The methods and architectures used in this work were developed for use with wireless sensor networks (WSNs). While previous work has shown that highly sensitive equipment is capable of long-range detection of UEE the intention of this work is to develop a network of small, low cost smart sensor nodes (SSNs) capable …

Efficient Modular Arithmetic Units For Low Power Cryptographic Applications, Rajashekhar Reddy Modugu

Masters Theses

"The demand for high security in energy constrained devices such as mobiles and PDAs is growing rapidly. This leads to the need for efficient design of cryptographic algorithms which offer data integrity, authentication, non-repudiation and confidentiality of the encrypted data and communication channels. The public key cryptography is an ideal choice for data integrity, authentication and non-repudiation whereas the private key cryptography ensures the confidentiality of the data transmitted. The latter has an extremely high encryption speed but it has certain limitations which make it unsuitable for use in certain applications. Numerous public key cryptographic algorithms are available in the …

Integration And Characterization Of An Electrical Storage System For A Hydrogen Fuel Cell Plug-In Hybrid Electric Vehicle, Edward Alexei Anculle Arauco

Masters Theses

"Hydrogen fuel cell hybrid vehicles are an advance technology that promises to solve the energy crisis in transportation and green houses emissions. Even more, Plug-in or extended range vehicles can add diversity in energy sources. Extended range vehicles have the capability to extract energy from the grid and hence reduce the cost of operation of the vehicle. EcoCAR: the NeXt Challenge is a Noth [sic] American competition with seventeen schools participating across North America. Missouri S&T is developing a Fuel Cell Plug-in Hybrid electric vehicle which has a large lithium-ion battery able to store 16 kWh. The fuel cell powertrain …

Synergy Between Biology And Systems Resilience, Ashik Chandra

Masters Theses

"Resilient systems have the ability to endure and successfully recover from disturbances by identifying problems and mobilizing the available resources to cope with the disturbance. Resiliency lets a system recover from disruptions, variations, and a degradation of expected working conditions. Biological systems are resilient. Immune systems are highly adaptive and scalable, with the ability to cope with multiple data sources, fuse information together, makes decisions, have multiple interacting agents, operate in a distributed manner over a multiple scales, and have a memory structure to facilitate learning. Ecosystems are resilient since they have the capacity to absorb disturbance and are able …

Analysis Of The Theta-D Filter As Applied To Hit-To-Kill Interceptors And Satellite Orbit Determination, Michael W. Dancer

Masters Theses

"When designing feedback control systems, there is often a need for estimation methods that provide system information that is not readily available via sensors placed within the system. In many cases a sensor that measures a particular system state either does not exist or is prohibitively expensive. In addition, all realistic systems contain some degree of nonlinearity. This thesis focuses on two such cases: missile guidance with bearings-only measurements and GPS satellite orbit determination. In each case, a new nonlinear filter, the [theta]-D method, is used and evaluated for its performance in providing the necessary estimation. To aid the filter …

Internet-Accessible Hot Cell With Gamma Spectroscopy At The Missouri University Of Science And Technology Research Nuclear Reactor, Edwin Grant

Masters Theses

A dual-chambered internet-accessible heavily shielded facility with pneumatic access to the University of Missouri Science and Technology (Missouri S&T) 200 kW Research Nuclear Reactor (MSTR) core has been built and is currently under low level irradiation testing. The facility allows distance users doing collaborative work with Missouri S&T researchers to manipulate and analyze neutron irradiated samples remotely. The system consists of two shielded compartments, one for multiple sample storage (up to 11 samples), and the other for isolated radiation measurements and spectroscopy. The second chamber has multiple detector ports, graded shielding, and has the capability to support gamma spectroscopy using …