Engineering Commons^™

Forensic Analysis Of The Windows 7 Registry, Khawla A. Alghafli, Andrew Jones, Thomas A. Martin

Journal of Digital Forensics, Security and Law

The recovery of digital evidence of crimes from storage media is an increasingly time consuming process as the capacity of the storage media is in a state of constant growth. It is also a difficult and complex task for the forensic investigator to analyse all of the locations in the storage media. These two factors, when combined, may result in a delay in bringing a case to court. The concept of this paper is to start the initial forensic analysis of the storage media in locations that are most likely to contain digital evidence, the Windows Registry. Consequently, the forensic …

Reeling In Big Phish With A Deep Md5 Net, Brad Wardman, Gary Warner, Heather Mccalley, Sarah Turner, Anthony Skjellum

Journal of Digital Forensics, Security and Law

Phishing continues to grow as phishers discover new exploits and attack vectors for hosting malicious content; the traditional response using takedowns and blacklists does not appear to impede phishers significantly. A handful of law enforcement projects — for example the FBI's Digital PhishNet and the Internet Crime and Complaint Center (ic3.gov) — have demonstrated that they can collect phishing data in substantial volumes, but these collections have not yet resulted in a significant decline in criminal phishing activity. In this paper, a new system is demonstrated for prioritizing investigative resources to help reduce the time and effort expended examining this …

The 2009 Analysis Of Information Remaining On Disks Offered For Sale On The Second Hand Market, Andy Jones, Craig Valli, Glenn S. Dardick, Iain Sutherland, G. Dabibi, Gareth Davies

Journal of Digital Forensics, Security and Law

The ever increasing use and reliance upon computers in both the public and private sector has led to enormous numbers of computers being disposed of at the end of their useful life within an organisation. As the cost of computers has dropped, their use in the home has also continued to increase. In most organisations, computers have a relatively short life and are replaced on a regular basis with the result that, if not properly cleansed of data, they are released into the public domain containing data that can be relatively up to date. This problem is exacerbated by the …

Using Jackknife To Assess The Quality Of Gene Order Phylogenies, Jian Shi, Yiwei Zhang, Haiwei Luo, Jijun Tang

Faculty Publications

Background
In recent years, gene order data has attracted increasing attention from both biologists and computer scientists as a new type of data for phylogenetic analysis. If gene orders are viewed as one character with a large number of states, traditional bootstrap procedures cannot be applied. Researchers began to use a jackknife resampling method to assess the quality of gene order phylogenies.

Results
In this paper, we design and conduct a set of experiments to validate the performance of this jackknife procedure and provide discussions on how to conduct it properly. Our results show that jackknife is very useful to …

High-Performance Heterogeneous Computing With The Convey Hc-1, Jason D. Bakos

Faculty Publications

Unlike other socket-based reconfigurable coprocessors, the Convey HC-1 contains nearly 40 field-programmable gate arrays, scatter-gather memory modules, a high-capacity crossbar switch, and a fully coherent memory system.

Social Networking Sites: Evaluating And Investigating Their Use In Academic Research, Fiona Redmond

Dissertations

Researchers must collect and analyse new data that will enhance the body of knowledge. It is for this reason that data is of major importance to researchers. All aspects of a research project involve data, from navigating existing data, to understanding how data is used in the world and why it is important to learn to collect data and make predictions. Researchers need to consider the types of data that are possible and examine and weight each option so they can determine what sources of data will answer the research questions or hypotheses.

Researchers, who require a large amount of …

Ab-10-C037: Effects Of Noise From Building Mechanical Systems On Elementary School Student Achievement, Lauren M. Ronsse, Lily M. Wang

Durham School of Architectural Engineering and Construction: Faculty Publications

This project seeks to determine what relationship, if any, exists betweenbackground noise levels in elementary classrooms due to the building mechanicalsystems and student performance on achievement tests. Previous research inclassroom acoustics has clearly identified that lower background noise levelsresult in higher speech intelligibility which is crucial for the learning process;however, there is a lack of data correlating lower noise levels to improved studentachievement scores. For this study, background noise level measurements were madein 14 elementary schools in a public school system in Council Bluffs, Iowa, USA.The measurements were made in unoccupied classrooms with the central buildingmechanical systems activated. Second and …

Computer Forensics For Graduate Accountants: A Motivational Curriculum Design Approach, Grover S. Kearns

Journal of Digital Forensics, Security and Law

Computer forensics involves the investigation of digital sources to acquire evidence that can be used in a court of law. It can also be used to identify and respond to threats to hosts and systems. Accountants use computer forensics to investigate computer crime or misuse, theft of trade secrets, theft of or destruction of intellectual property, and fraud. Education of accountants to use forensic tools is a goal of the AICPA (American Institute of Certified Public Accountants). Accounting students, however, may not view information technology as vital to their career paths and need motivation to acquire forensic knowledge and skills. …

Table Of Contents

Journal of Digital Forensics, Security and Law

No abstract provided.

Dynamic Model Of Ecological Factors Impacting The Gulf Of Mexico Dead Zone, Jimmie Arnold Brumfield Ii

LSU Doctoral Dissertations

The industrial agriculture complex of the Mississippi River Drainage Basin has the positive effect of feeding more individuals with less land via the use of chemical nutrients, pesticides and drainage. The negative effects of the agricultural nutrient load are carried by the Mississippi River to the Gulf of Mexico. After the flood of 1927 the Flood Control Act of 1928 began changing the Mississippi River into a navigation and flood control project. While successful, the river was turned into a channel where nutrient input was discharged into the Gulf of Mexico. Nitrogen compounds discharged from the Mississippi are claimed to …

Spheroid Detection In 2d Images Using Circular Hough Transform, Priyanka Chaudhary

University of Kentucky Master's Theses

Three-dimensional endothelial cell sprouting assay (3D-ECSA) exhibits differentiation of endothelial cells into sprouting structures inside a 3D matrix of collagen I. It is a screening tool to study endothelial cell behavior and identification of angiogenesis inhibitors. The shape and size of an EC spheroid (aggregation of ~ 750 cells) is important with respect to its growth performance in presence of angiogenic stimulators. Apparently, tubules formed on malformed spheroids lack homogeneity in terms of density and length. This requires segregation of well formed spheroids from malformed ones to obtain better performance metrics. We aim to develop and validate an automated imaging …

Uv-Lithographic Patterning Of Micro-Features On A Conical Mold Insert, Justin P. Huber

University of Kentucky Master's Theses

In past studies, several techniques have been employed to create microscopic features on relatively simple surfaces. Of these, lithography-based techniques have proven effective at manufacturing large fields of deterministic microasperities and microcavities on planar and cylindrical substrates. The present study focuses on adapting UV-lithography to a more complex substrate. Machined from stainless steel, a conical mold insert introduces an interesting geometry designed for the injection molding of radial lip seal elastomer. The distinct shape of this mold insert poises unique challenges to a conventional lithography procedure. Spray application is investigated as a feasible means to deposit layers of photoresist on …

Fpga Based Parallel Implementation Of Stacked Error Diffusion Algorithm, Rishvanth Kora Venugopal

University of Kentucky Master's Theses

Digital halftoning is a crucial technique used in digital printers to convert a continuoustone image into a pattern of black and white dots. Halftoning is used since printers have a limited availability of inks and cannot reproduce all the color intensities in a continuous image. Error Diffusion is an algorithm in halftoning that iteratively quantizes pixels in a neighborhood dependent fashion. This thesis focuses on the development and design of a parallel scalable hardware architecture for high performance implementation of a high quality Stacked Error Diffusion algorithm. The algorithm is described in ‘C’ and requires a significant processing time when …

Statistical Models For Constant False-Alarm Rate Threshold Estimation In Sound Source Detection Systems, Sayed Mahdi Saghaian Nejad Esfahani

University of Kentucky Master's Theses

Constant False Alarm Rate (CFAR) Processors are important for applications where thousands of detection tests are made per second, such as in radar. This thesis introduces a new method for CFAR threshold estimation that is particularly applicable to sound source detection with distributed microphone systems. The novel CFAR Processor exploits the near symmetry about 0 for the acoustic pixel values created by steered-response coherent power in conjunction with a partial whitening preprocessor to estimate thresholds for positive values, which represent potential targets.

To remove the low frequency components responsible for degrading CFAR performance, fixed and adaptive high-pass filters are applied. …

Distraction Osteogenesis In An Organ Culture Model, Bradley R. Heil

University of Kentucky Master's Theses

Distraction osteogenesis (DO) is a surgical procedure in which applied strain stimulates new bone growth; however, the underlying mechanisms by which bone cells respond to load are still uncertain. An organ culture model of DO was developed and validated by using linear distraction on the femoral shafts of 5 day old Wistar rats. Two loading regimes were utilized: distracting the bones for 2 hrs on day 1 (GRP I); distracting the bones for 2 hrs on days 1, 3, and 5 (GRP II). After 1 week in culture, the bones were compared to unloaded contralateral controls and assessed for changes. …

Design And Implementation Of The Instruction Set Architecture For Data Lars, Kalyan Ponnala

University of Kentucky Master's Theses

The ideal memory system assumed by most programmers is one which has high capacity, yet allows any word to be accessed instantaneously. To make the hardware approximate this performance, an increasingly complex memory hierarchy, using caches and techniques like automatic prefetch, has evolved. However, as the gap between processor and memory speeds continues to widen, these programmer-visible mechanisms are becoming inadequate.

Part of the recent increase in processor performance has been due to the introduction of programmer/compiler-visible SWAR (SIMD Within A Register) parallel processing on increasingly wide DATA LARs (Line Associative Registers) as a way to both improve data access …

Response Surface Optimization Of Crystal Violet Decolorization By Pellets Of Pyncnoporus Sanguineus., Siti Suhana Sulaiman

Student Works (2010-2019)

Ligninolytic enzymes of white-rot fungi have broad specificities and have been implicated in transformation and mineralization of organo-pollutant with chemical structure similar to lignin e.g. synthetic dyes. This study was carried out to optimize selected parameters for decolorization of Crystal violet by Pycnoporus sanguineus in shake flasks. The parameters studied were initial dye concentration (ppm), agitation speed (rpm) and process time. They were optimized using response surface methodology (RSM). Subsequent to the optimization, the decolorization process was scaled up in stirred tank reactor (STR). Effect of different geometry of impellers on the decolorization process was studied. Curved blade and angled …

Municipal Solid Waste Management In Selected Malaysian Islands., Nagendran Periaiah

Student Works (2010-2019)

Rapid developments and tourism related activities in Islands have increased the per capita waste generation that led to increased waste disposal at landfill. To date, islands in Malaysia are generating approximately 400 metric tons of MSW. Approximately 60% of the waste are collected and disposed off in non-sanitary landfills. The remaining 35 % were illegally burned/ dumped and 5 % were dumped into ocean. 100% of landfills in Malaysian islands operate as mere open-dumps that lack proper lining system and without leachate treatment facilities. The vicinities bordering non-sanitary landfill sites became highly polluted due to certain harmful gases/ leachate generated …

Design And Simulation Of Silica-On-Silicon Pump/Signal Multiplexer For Hybrid Passive-Active Optical Devices., Alvin Law Wen Pin

Student Works (2010-2019)

This dissertation describes the design and simulation of silica-on-silicon pump/signal multiplexer for hybrid passive-active optical devices. Uniform symmetric directional couplers and planar Bragg gratings were utilized in this work, forming the essential building blocks in a waveguide amplifier. Several designs in relation to the multiplexers are presented in this work, with the simplest application for the directional coupler as a pump/signal multiplexer. A 980/1550 nm and an 800/1310 nm pump/signal multiplexers for erbium doped and bismuth doped waveguide amplifier, respectively were modeled. These couplers were designed and simulated in Rsoft BeamPROP environment, utilizing 3D Finite Difference Beam Propagation Method (FD-BPM) …

Characteristics Of Proton Conducting Pva-Chitosan Polymer Blend Electrolytes., Mohd Fakhrul Zamani Abdul Kadir

Student Works (2010-2019)

The main focus of this present work is to build a good conducting solid polymer electrolyte (SPE) based on chitosan and poly(vinyl alcohol)(PVA) blend. Solution cast technique has been employed to produce sample films in this work. From the scanning electron micrographs (SEM) the surface morphology of the blend containing 40 wt.% chitosan and 60 wt.% PVA (C4P6) is homogenous and miscible in one and another. The C4P6 film is the most amorphous and is the best candidate for the polymer host in the electrolyte systems studied in the present work. Ammonium Nitrate (NH4NO3) is the doping salt that provides …

Mechanical And Thermodynamic Properties Of Bacteriorhodopsin Langmuir Film., Vijayandren Kuppusamy

Student Works (2010-2019)

Bacteriorhodopsin is a photoactive protein found in the purple membranes of the highly halophilic bacterium Halobacterium Salinarium. Due to highly efficient and simple in its function, Bacteriorhodopsin has been extensively researched and successfully incorporated into many practical applications. In this regard, the fabrication of compactly packed and functionally active Bacteriorhodopsin thin film is crucial in realizing a highly efficient device. The aim of this thesis is to analyze the mechanical and thermodynamic properties of the Bacteriorhodopsin-Langmuir monolayer film from the surface pressure-area per molecule isotherm to produce a compactly pact and functionally active monolayer film. For this, we have proposed …

Electrodeposition Of Tin Using Tin (Ii) Methanesulfonate From Mixture Of Ionic Liquid And Methane Sulfonic Acid., Yang Kok Kee

Student Works (2010-2019)

The electrodeposition of tin from Tin(II) Methane Sulfonate (MSA) with varying concentration in air and water stable 1-butyl-1-methyl-pyrrolidinium trifluoromethanesulfonate, (BMPOTF) ionic liquid at room temperature was studied. Cyclic Voltammetry served to characterize the electrochemical behavior of tin reduction and oxidation. The diffusion coefficient of stannous ions in the mixture of BMPOTF ionic liquid and MSA based electrolyte obtained via Randles-Sevcik and Cottrell equation was 2 × 10-7 cm2/s. Electroplating on copper panel was conducted under different current densities to determine BMPOTF based tin plating solution current efficiency. Mixture of BMPOTF and MSA based tin plating solution gave current efficiency as …

Nonlinear Fiber Lasers Using Bismuth Based Erbium Doper Fiber Amplifier., Sharifeh Shahi

Student Works (2010-2019)

A thorough study on Bismuth-based Erbium-doped fiber (Bi-EDF) is presented for wide-band amplifiers and multi-wavelength fiber laser applications. This fiber allows high Erbium ions concentration to be doped without a significant concentration quenching effect. The high refractive index characteristic in the Bi-EDF has broadened the emission spectrum of Erbium ions to achieve a broader gain spectrum up to extended L-band region compared to normal silica-based Erbium-doped fiber (EDF). The Bi-EDFA performances have been investigated in terms of power conversion efficiency (PCE), quantum conversion efficiency (QCE), gain and noise figure. The highest QCE and PCE for a 215 cm long of …

Adsorption Of Lead (Ii) By A Non-Living Algal Biomass., Mudher A Hussein

Student Works (2010-2019)

Conventional techniques for removing dissolved heavy metals are only practical and cost-effective when applied to high strength wastes with heavy metal ion concentrations greater than 100 ppm. The possibility of using a non-living algal biomass to solve this problem was studied. Lead(II) was used in this study because it has been reported to cause several disorders in human. The non-living algal biomass was obtained from the filamentous green alga Spirogyra neglecta. The effects of initial concentration and contact time, pH, and temperature on the adsorption of lead(II) by the non-living algal biomass were studied. The equilibrium isotherms and kinetics were …

Synthesis Of Urethane Acrylate Macromer From Palm Oil-Based Polyol And Its Application As A Resin For Dental Composite., Fadhel A. A. Alsanabani

Student Works (2010-2019)

A slightly branched urethane acrylate macromer (UAM) was synthesized by reacting palm oil-based polyol with excess amounts of polymeric methylene diphenyl diisocyanate (MDI) to form urethane prepolymer, then reacted with 2-hydroxyethyl methacrylate (HEMA) and FT-IR spectroscopy confirmed the urethane and grafted acrylate groups. 0.2% by weight of camphoroquinone (CQ) and 0.8% by weight of ethyl-4-N,N-dimethylamino-benzoate (4EDMAB) by weight were added to render the experimental resins light-curable. Their viscosity, percentage of degree of conversion (%DC) and cross-linking density (CLD), percentage of volumetric polymerization shrinkage (%VPS), water sorption and solubility, flexural strength, modulus of elasticity and toughness were determined and compared to …

Synthesis And Characterization Of Zinc Oxide Nanostructures., Khalifa Said Zahran Al-Azri

Student Works (2010-2019)

The growth mechanism, morphology, structure and optical properties of the ZnO nanostructures grown on bare and gold-coated silicon substrates using carbothermal reaction at atmospheric pressure were investigated under different growth conditions. The ZnO nanostructures formed were studied as a function of substrate location, furnace temperature, Ar gas flow rate, deposition time and ZnO powder to carbon powder mass ratio. The morphology and structure of the samples were characterized using the fieldemission scanning electron microscopy (FESEM), energy dispersive x-ray spectroscopy(EDX) spectrum, x-ray diffraction (XRD) and high resolution transmission electron microscopy (HRTEM). It was found that in both silicon and gold-coated silicon …

Thermo-Electrical And Mechanical Studies On Polymer-Organically Modified Montmorillonite Composite., Norhana Abdul Halim

Student Works (2010-2019)

The field of polymer-nanoclay composite has attracted a lot of attention in materials studies due to the dramatic improvement on polymers characteristics. For example mechanical and thermal properties, chemical resistance as well as the reduced gas permeability. However, structural changes and the mechanisms that may contribute to these improvements are not fully understood. In this work, the study on polymer nanoclay composite concentrates on the effects of OMON inclusion within different polymer matrix systems. The matrixes are a series of natural rubbers (Standard Malaysia Rubber – Latex grade (SMRL); Deproteinized Natural Rubber (DPNR) and Epoxidized Natural Rubber (ENR-50)), plasticized Polyvinyl …

Hazard Identification, Risk Assessment And Risk Control (Hirarc) In A Corrugated Box Manufacturer., Fraziel Barahim

Student Works (2010-2019)

Packaging is one of the biggest industries in the world. It involves paper, glass,metal, flexible and plastic. The corrugated paper packaging worldwide has been growing at 3% to 4% per annum. In line with the expansion of the corrugated paper packaging manufacturing, the potential hazards to human physical and health, property and the environment posed by its operations and production activities have created an increase in awareness and brought up safety issues amongst industry, government and public. The hazard identification and risk assessment plays a role in a number of areas in the safety management, including regulatory policies and guidelines, …

Electrical And Structural Studies Of Polyacrylonitrile (Pan) Complexed With Inorganic Salts., Khairul Bahiyah Md Isa

Student Works (2010-2019)

In the present study, polymer electrolyte films composed of polyacrylonitrile (PAN) as a host polymer, ethylene carbonate (EC) as the plasticizer and lithium triflate (LiCF3SO3) and sodium triflate (NaCF3SO3) as dopant salts were prepared by the solution cast technique. Five systems of polymer electrolytes films have been prepared; these systems are the plasticized-PAN system i.e. PAN-EC system, two salted-PAN systems i.e. PAN-LiCF3SO3 and PAN-NaCF3SO3, and two plasticized-salted PAN systems i.e. PAN-EC-LiCF3SO3 and PAN-EC-NaCF3SO3. The pure PAN film was prepared as a reference. The ionic conductivity for each system is characterized using impedance spectroscopy. The room temperature conductivity of the pure …

Municipal Solid Waste Management : A Comprehensive Study In Selangor., Fauziah Shahul Hamid

Student Works (2010-2019)

The disposal of 95% of the 1.4 million tonnes of MSW from Selangor, the fastest developing state in Malaysia, is rapidly exhausting landfill space and is also jeopardizing public health. Therefore, proper planning of waste management based on accurate information is essential. The objectives of this research are to collate data from landfills and to investigate the level of public awareness on waste management issues, to analyze the current pollution impacts of landfills and to propose viable options to improve the waste management system in the state. Nine non-sanitary landfills in Selangor were investigated for waste composition and quantification, detailed …