Engineering Commons^™

Energy Efficient Led Displays, John Mani Kumar Jupalli

UNLV Theses, Dissertations, Professional Papers, and Capstones

In this research work, an innovative pixel architecture RGBW, consisting of red (R), green (G), blue (B), and white (W) LEDs, is designed and implemented for color generation. Energy consumption of new pixel architecture consisting of RGBW LEDs is compared to standard architecture consisting of RGB LEDs. Human perception experiments are conducted to study the differences in perception between the two architectures when the same colors are generated using RGBW vs. RGB. Measurements of power for a 32inch x 16inch LED display has proved up to 18% power savings for low saturated colors, up to 8% for high saturated colors …

The Development And Validation Of A Finite Element Model Of A Canine Rib For Use With A Bone Remodeling Algorithm., Scott J. Sylliaasen

Master's Theses

Studies are currently being performed to determine the effects of bisphosphonate treatments on the structure and density of bone tissue. One of the pathways for gaining a better understanding of the effects of this and other treatments involves creating a computer simulation. Theory suggests that bone tissue structure and density are directly related to the manner in which the tissue is loaded. Remodeling is the process in which bone tissue is resorbed in areas of low stress distributions, and generated in areas of high stress distributions. Previous studies have utilized numerical methods and finite element methods to predict bone structure …

Control Of Longitudinal Pitch Rate As Aircraft Center Of Gravity Changes, John Andres Cadwell Jr.

Master's Theses

In order for an aircraft to remain in stable flight, the center of gravity (CG) of an aircraft must be located in front of the center of lift (CL). As the center of gravity moves rearward, pitch stability decreases and the sensitivity to control input increases. This increase in sensitivity is known as pitch gain variance. Minimizing the pitch gain variance results in an aircraft with consistent handling characteristics across a broad range of center of gravity locations.

This thesis focuses on the development and testing of an open loop computer simulation model and a closed loop control system to …

Static And Fatigue Failure Response Of Woven Carbon Fiber Specimens With Double Edge Notches, Ahmad J. Amini

Master's Theses

Carbon fiber composites are continually seeing increased use in aerospace applications. It is necessary to understand their failure modes in order to properly design and perform analysis on structures constructed primarily from them. This thesis studies woven carbon fiber composites with and without double-edge notches in a series of static and fatigue tests performed on an Instron 8801 servo-hydraulic testing system.

Specimens were constructed of Advanced Composites Group product # LTM45EL woven carbon fiber pre-preg/epoxy and were cut to approximately 9-inch in length and 1-inch in width. Notches were cut into some of the specimens using a slitting saw blade …

Effects Of Cloud-Induced Photovoltaic Power Transients On Power System Protection, Joel A. Nelson

Master's Theses

As the world strives towards finding alternative sources of power generation, photovoltaic generation has become an increasingly prevalent alternative energy source on power systems world-wide. This paper studies the effects that incorporating photovoltaic generation has on the existing power systems and their power system protection schemes. Along with the addition of this emerging alternative energy source comes the volatility of PV power generation as cloud-cover produces erratic variations in solar irradiance and PV power production. Such variations in PV power may lead to unfavorable operating conditions and power system failures. The issues addressed in this paper include a study of …

Artificial Skin Tactile Sensor For Prosthetic And Robotic Applications, Ross James Miller

Master's Theses

To solve the problem of limited tactile sensing in humanoid robotics as well as provide for future planned mechanical prostheses, an innovative tactile sensor system was created and embedded into two realistic-looking artificial skin gloves. These artificial skin tactile sensors used small piezoelectric ceramic disks to measure applied force at multiple points on each glove. The gloves were created using silicone rubber to simulate both the texture and look of human skin, while maintaining both flexibility and durability. The sensor outputs were buffered by high-impedance voltage-following operational amplifiers, and then read sequentially using a multiplexing scheme by a microcontroller. Sensor …

The Effectiveness Of Damage Arrestment Devices In Delaying Fastener-Hole Interaction Failures In Carbon Fiber Polyurethane Foam Composite Sandwich Panels Subjected To Static And Dynamic Loading Under Increased Temperatures, Dominic E. Surano

Master's Theses

A study was conducted to investigate simple, cost-effective manufacturing techniques to delay skin-core delamination, micro-buckling and bearing stress failures resulting from fastener-hole interactions. Composite sandwich panels, with and without damage arrestment devices (DADs), were subjected to monotonic compression at a rate of 5mm per second, and compression-compression fatigue at 50% yield at an amplitude of 65%, under temperatures of 75, 100, 125, 150, 175, and 200 °F.

The sandwiches tested were composed of two-layer cross-weave carbon fiber facesheets, a polyurethane foam core, and an epoxy film adhesive to join the two materials. The most successful method to delay the aforementioned …

Assessment Of Morphology And Hemodynamics In Normal And Remodeled Microvasculature With Parameter Sensitivity Analysis, Shilpi Ghosh

Master's Theses

The goal of this study was to compare the morphological and hemodynamic characteristics of normal and remodeled vascular networks in the mouse gracilis muscle. To this end, previously developed models to assess flows and vascular branching were used to assess the normal and remodeled microcirculatory networks. The analysis revealed that the average individual vessel flow rates for vessels of similar caliber and total volumetric flow rates in the networks do not change for vessels of the same caliber after remodeling. Connectivity changes and average diameters primarily change in the larger arterioles after remodeling. A few correlations could be made between …

Anaerobic Co-Digestion Of Wastewater Treatment Pond Algae With Wastewater Sludge, Daniel Eric Heimel

Master's Theses

Microalgae harvested from wastewater treatment ponds can be anaerobically digested to produce biogas, a renewable fuel resource. However, past experiments have shown some limitations of algae digestion. Algal cell walls are thought to be resistant to digestion, and the high protein content of algae can lead to ammonia toxicity in digesters. Co-digestion of algae with substrates containing higher C:N ratios (e.g., waste paper) can be used to maintain non-inhibitory ammonia concentrations and increase methane production. However, high carbon waste co-substrates have become costly or are not readily available in many communities. Although domestic wastewater sludge has only a marginally higher …

Development Of Cubesat Vibration Testing Capabilities For The Naval Postgraduate School And Cal Poly San Luis Obispo, Marissa Brummitt

Master's Theses

The Naval Postgraduate School is currently developing their first CubeSat, the Solar Cell Array Tester CubeSat, or NPS-SCAT. Launching a CubeSat, such as NPS-SCAT, requires environmental testing to ensure not only the success of the mission, but also the safety of other CubeSats housed in the same deployer. This thesis will address the development of CubeSat vibration testing methodology at NPS, including subsystem testing, engineering unit qualification, and flight unit testing. In addition, the new Cal Poly CubeSat Test POD Mk III will be introduced and evaluated based upon comparison with the Poly Picosatellite Orbital Deployer (P-POD). Using examples from …

Cold-Formed Steel Framing Seismic Design Optimization Phase 1a: Seismic Equivalency Parameter Evaluation, American Iron And Steel Institute

American Iron and Steel Institute (AISI) Specifications, Standards, Manuals and Research Reports (1946 - present)

No abstract provided.

An Analysis Of The Manufacturing Process As Related To The Camber Requirement For Brake Pads, Daniel Patrick Midden

Morehead State Theses and Dissertations

A thesis presented to the faculty of the College of Science and Technology at Morehead State University in partial fulfillment of the requirements for the Degree of Master of Science by Daniel Patrick Midden on November 30, 2010.

Error Correcting Codes For Cooperative Broadcasting, Robert H. Morelos-Zaragoza

Faculty Publications

This talk considers the design and implementation of error correcting codes for cooperative broadcasting in wireless networks. Focus is on the case of two cooperating sources transmitting two classes of information to a single receiver. This case was first introduced in the seminal work of Bergmans and Cover and referred to as "over the air mixing". Two levels of protection are provided using two low-density parity-check (LDPC) codes combined using Plotkin's |u|u+v|-construction. Expressions are derived for the bit metrics used in iterative decoding for two-level codes combined with BPSK, QPSK and 4-PAM modulations. Several examples of codes and their performance …

System And Technique For Retrieving Depth Information About A Surface By Projecting A Composite Image Of Modulated Light Patterns, Laurence G. Hassebrook, Daniel L. Lau, Chun Guan

Electrical and Computer Engineering Faculty Patents

A technique, associated system and program code, for retrieving depth information about at least one surface of an object, such as an anatomical feature. Core features include: projecting a composite image comprising a plurality of modulated structured light patterns, at the anatomical feature; capturing an image reflected from the surface; and recovering pattern information from the reflected image, for each of the modulated structured light patterns. Pattern information is preferably recovered for each modulated structured light pattern used to create the composite, by performing a demodulation of the reflected image. Reconstruction of the surface can be accomplished by using depth …

Small-Scale Solutions To Grand Challenges In Thermal Management, Suresh V. Garimella

Birck and NCN Publications

Research needs in the field of thermal management of microelectronics and microsystems are identified, followed by a brief discussion of recent advances in solution approaches. These include novel solutions that rely on two-phase flow at the microscale, micropumps, droplet actuation on structured surfaces, passive transport in wick structures, ion-driven and piezoelectrically driven airflow, nanostructured thermal materials, and novel diagnostic tools.

Fibronectin For Use In Hemostats And Wound Stabilization In Trauma, Mohammed Halhouli

Department of Chemical and Biomolecular Engineering: Dissertations, Theses, and Student Research

Exploring the phase during wound healing when fibrinogen (FBG) and fibronectin (FN) interact forming a small thin layer for cells to migrate and proliferate at the injury site is necessary for the primary building blocks and initial stages of skin recovery. The aim of this thesis is to illustrate that administrating a reasonable amount of (FN) and FBG, in a semi-organizational technique, to the wound site will encourage cell population and ECM formation, as well as, improve the wound healing process. WE hypothesized that FBG and FN interactions will configure the construction of dermal cells and their final fate to …

A Flexible Context Architecture For A Multi-User Gui, Yue Xu

Theses and Dissertations

This thesis focuses on the design and development of a flexible context architecture for a multi-user GUI that serves several users engaged in collaborative computer-aided applications (CAx). The objective of this thesis is to extend previous research into multi-user GUI's by providing multiple users with a flexible context interface for interaction with other users working on the same part at distributed locations. The investigation will consider how distributed users, through user interfaces, interact to simultaneously build models and how interaction context might be presented to regulate the way they wish to interact. The implementation integrates a Multi-User GUI (MUG) with …

Investigation Of Mechanical Differentials As Continuously Variable Transmissions, Dax B. Wells

Theses and Dissertations

In recent years the increasing demand for fuel efficient and less pollutant vehicles has stimulated the development of hybrid and electric vehicles. These vehicle platforms often incorporate drivetrains which utilize multiple power sources for vehicle propulsion in an effort to increase fuel mileage and reduce emissions. Coupling multiple power sources, such as an internal combustion engine and electric motor(s), has new challenges in drivetrain design. Understanding the torque and rpm relationships within the power transmission device used to combine power sources is fundamental to overcoming the design challenges associated with hybrid and electric vehicle platforms. Results from this research include …

Liquefaction Mitigation In Silty Sands At Salmon Lake Dam Using Stone Columns And Wick Drains, Emily Dibb Thiriot

Theses and Dissertations

Stone columns are an established method of liquefaction mitigation in clean sands (fines content <15%). Although stone columns are considered less effective in silty soils, an increase in the area replacement ratio or the addition of wick drains may still produce improvement in the normalized blow count. Limited case histories are available with a direct comparison of the use of stone columns with and without wick drains at one location. The Salmon Lake Dam Modification project provided such a scenario. Two test sections were completed at the site prior to construction to determine the area replacement ratio for the final design as well as to compare the application of stone columns with and without wick drains. Visual observations of water and air escaping from wick drains within a distance of 15 ft of the stone column construction confirmed that drains aided in pore pressure dissipation. Test results indicated that stone column treatment with wick drains produced greater improvement in blow count than stone column treatment without drains. For the overall site, there was an increase in improvement ranging from 3 to 8 SPT blow counts. When compared to the results of a similar evaluation of a site in Ogden, Utah, which had a comparable fines content and an area replacement ratio of 26%, the increase in stone column effectiveness produced by adding wick drains was lower at the Salmon Lake Dam site. The increase in improvement at the Ogden, Utah site ranged from 12 to 18 SPT blow counts. At the Ogden site, wick drains were placed between every stone column while they were only placed between vertical rows of columns at Salmon Lake dam. Despite the beneficial effects provided by using wick drains with stone column treatment in silty soils, the performance was below what would be expected for stone column treatment without wick drains in clean sands with less than 15% fines. Stone column treatment also proved less effective in layers of sandy silt than in layers of silty sand, which was indicated by lower average improvement and more points of negative improvement in layers of sandy silt. Although several different area replacement ratios were analyzed (23, 27, 31, and 35%), no consistent trend towards greater improvement in blow count was seen as the replacement ratio increased beyond 23%.

Pedestrian Activity On The Uah Campus, Morgan Chamberlain

Honors Capstone Projects and Theses

No abstract provided.

Mems-Based Pufs For Cryptographic Applications, Nicholas Shane Patrick

Honors Capstone Projects and Theses

No abstract provided.

Web-Based Intelligent Computational Argumentation Based Conflict Resolution In Air Traffic Management, Xiaoqing Frank Liu, Ravi Santosh Arvapally, Hojong Baik, Rubal Wanchoo

Computer Science Faculty Research & Creative Works

Collaborative decision making (CDM) is a process of reaching consensus on a potential solution of an issue through the evaluation of the different possible alternatives. the web-Based intelligent computational argumentation system allows concerned stakeholders to post their arguments on different alternatives, assign weights and priorities to the arguments and reach the most favorable alternative using fuzzy intelligent techniques over the Internet. Exchange of information among the stakeholders improves the collaboration and drives towards the collective intelligence. in this paper, we show how our tool facilitates resolution of conflicts in air traffic management. It could enhance the Ground Delay Program (GDP) …

A 24ft/7.3m Parabolic Reflector Antenna Performance & Feed Design Analysis, Anthony Shelley

Morehead State Theses and Dissertations

A thesis presented to the faculty of the College of Science & Technology at Morehead State University in partial fulfillment of the requirements for the Degree of Master of Science by Anthony Shelley on November 29, 2010.

Seismic Performance Of Square Rc Bridge Columns Under Combined Loading Including Torsion With Low Shear, Q. Li, Abdeldjelil Belarbi, S. S. Prakash

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

During earthquake excitations, reinforced concrete bridge columns can be subjected to a combination of axial load, shear force, flexural moments, and torsional moments. the torsional moment can be much more significant in columns of bridges that are skewed, curved, have unequal spans, or unequal column heights. Combined loading including torsion can result in complex flexural and shear failure of these bridge columns. This paper presents an experimental study on the seismic behavior of square reinforced concrete columns under combined cyclic flexural and torsional moments. the columns in this study were designed with an aspect ratio of six and tested under …

Structural Health Monitoring Of Reinforced Concrete Columns Subjected To Reversed Cyclic Loading Using Innovative Smart Aggregates, Yashar Moslehy, Haichang Gu, Abdeljalil Belarbi, Y. L. Mo, Gangbing Song

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Structural health monitoring is an important issue for the maintenance of large-scale civil infrastructure, especially for bridge columns. in this paper, an innovative piezoceramic-Based approach is developed for the structural health monitoring of reinforced concrete columns. an innovative piezoceramic-Based device, smart aggregate, is utilized as a transducer for health monitoring purposes. to investigate the seismic behavior of RC bridge columns, structural health monitoring tests were performed on two bridge columns under combined reversed cyclic loading at Missouri University of Science and Technology. Experimental results show that the proposed smart aggregate-Based approach successfully evaluated the health status of concrete columns during …

Thermal Properties Of Lunar Regolith Simulants, Kenneth W. Street, Chandra Ray, Doug Rickman, Daniel A. Scheiman

Materials Science and Engineering Faculty Research & Creative Works

Various high temperature chemical processes have been developed to extract oxygen and metals from lunar regolith. These processes are tested using terrestrial analogues of the regolith. But all practical terrestrial analogs contain H₂O and/or OH-, the presence of which has substantial impact on important system behaviors. We have undertaken studies of lunar regolith simulants to determine the limits of the simulants to validate key components for human survivability during sustained presence on the moon. Differential Thermal Analysis (DTA) yields information on phase transitions and melting temperatures. Thermo-Gravimetric Analysis (TGA) with Fourier Transform Infrared (FTIR) analysis provides information on …

Plasma Processing Of Lunar Regolith Simulant For Oxygen And Glass Production, S. Sen, D. Butts, J. S. O'Dell, C. S. Ray

Materials Science and Engineering Faculty Research & Creative Works

Tools for extracting life-sustaining resources from the moon are needed to support the vision for space exploration. of particular interest is the production of oxygen for life support and propulsion. on the lunar surface the only practical source for oxygen is the lunar regolith. Described in this paper is an innovative plasma reduction technique for the production of oxygen from lunar regolith. Thermodynamic calculations showed that the regolith oxides could be dissociated to yield up to 7.3 weight percent oxygen when exposed to extremely high temperatures of up to 3000°C. Subsequently the use of a plasma flame to obtain oxygen …

Bulging Factors In Geometrically Nonlinear Cracked Laminated Shell Structure Under Dynamic Internal Pressure, Nitin B. Ingale

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

This thesis is about the investigation of the geometrically nonlinear responses and bulging factors of cracked laminated composite cylindrical shell structures subjected to internal pressure. Hybrid strain based three-node flat triangular shell elements, developed by To and Wang were used.

Effects of dynamic responses of various numbers of layers and their angle arrangements of cracked cylindrical shell structures clamped at both ends are analyzed and studied. Bulging factors based on the concept of equivalent Young’s modulus of elasticity are found and compared with single and multiple layer composite cylindrical shell structures.

Finally, bulging factors for similar laminated composite cylindrical shells …

Electrochemical Detection For The Corrosion Of Reinforcing Steel In Concrete During Immersion And Drying Cycles, Bing-Li Jia, Fa-He Cao, An-Na Chen, Jian-Qing Zhang

Journal of Electrochemistry

The corrosion behavior of reinforcing steel in concrete under dry-wet cycle condition has been studied by electrochemical noise(EN) compared with the electrochemical impedance spectroscopy(EIS),SEM micrographs and EDS.The statistical method has been employed to analyze the EN data of reinforcing steel in concrete,which revealed three different corrosion stages of reinforcing steel in concrete,including the dissolution of the passive film,the active corrosion and the cumulation of corrosion product.The wavelet transform has also been employed,which indicated that steel in concrete with pH 1 is associated with uniform corrosion,while steel in concrete with pH 3 and pH 7 are associated with localized corrosion,such as …

Study On Preparing Technology And Corrosion Resistance Of Ti/Zr Based Chromium-Free Chemical Conversion Coating On Zinc Electroplating Layer, Yong Guan, Jian-Guo Liu, Chuan-Wei Yan

Journal of Electrochemistry

In this paper,we obtained environmental-friendly chromium-free chemical conversion coating on the non-cyanide alkaline zinc electroplating layer by employing the optimized Ti/Zr based conversion technique.At the same time,the performances of the Ti/Zr based conversion coating were compared with chromate colour passivation coating.The corrosion resistances of the conversion coatings were investigated by using neutral salt spray(NSS) test,potentiodynamic polarization and electrochemical impedance spectroscopy(EIS).The results showed that the white rust appeared after 96 hours when the NSS test was performed on the Ti/Zr based conversion coating,which was close to the corrosion resistance rating of chromate colour passivation coating.Compared with the chromate passivation coating,the Ti/Zr …