Engineering Commons^™

Ultrasonic Shark-Tag Locator System For Iver2 Auv, Nathaniel Garcia

Computer Engineering

The purpose of this project is to develop a system for tracking an ultrasonic underwater transmitter that can be integrated into an IVER2 AUV to allow it to follow and monitor tagged sharks in the ocean for scientific research.

The system consists of a four main components including a shark-tag, two hydrophones, a filter/amplifier & threshold detector circuit, and a microcontroller.

This project, while not completing field testing and integration with the IVER2, is a proof of concept of a system that utilizes passive sonar to determine a bearing from the system to a shark-tag transmitter. Additionally, it devised several …

A Low Power Touch Screen Document Viewer, Chris Perfetto

Computer Engineering

This document will cover the requirements, design, implementation and testing of a low power touch screen document viewer to serve as a replacement bulletin board. It was Implemented using a BeagleBoard development board, a 4.3” touchscreen LCD and a SD card with a Ubuntu Linux OS installed. The testing of this device is primarily testing the power consumption. The device is not yet complete and will require further development for it to completely satisfy the requirements.

Max Flow Spill Code Placement Algorithm Implemented In Gcc 4.4.3, Stephen Robert Beard

Computer Engineering

The placement of spill code plays an important role in the register allocator of an optimizing compiler. Many computer architectures possess a register linkage convention that dictates which registers are preserved across function calls and which are not. This project addresses the problem of optimizing spill code that is associated with register linkage conventions.

This algorithm was created by Dr. Chris Lupo and is described in the paper Beyond Register Allocation: a Novel Algorithm for Spill-Code Placement. The algorithm was implemented for GCC 2.5.7 for a PA-RISC architecture [4]. The work in this project will involve porting the existing code …

Characterization Of The Rfx400 For Use In Software Defined Radio, Edward Adams

Computer Engineering

While software defined radio is an extremely flexible technology that is fairly rarely used, as a single purpose radio is much cheaper, it provides an excellent means of learning RF and communications skills through the lens of digital electronics, and it would behoove a Cal Poly student interested in these areas to take on a project in software defined radio. This project aims to lower the barrier to entry for future students to undertake such a project. The use of an up-converter/down-converter is documented for future students to interface with.

Rfid Asset Tracking And Digital Check-Out System, Jeffrey (Jeff) Migliore

Computer Engineering

An asset tracking and digital check-out system was developed using Radio Frequency Identification (RFID) and a Single Board Computer (SBC). A RFID reader was used as a check point to process transactions. The RFID reader was attached to the SBC via USB. The SBC is integrated into a network via Ethernet and hosts a web graphical user interface (GUI) frontend for users to view transactions and query availability of assets. A MYSQL database was used for the backend storage of data.

Specifically, this system was designed to track tool assets. Many modern companies have employees sharing limited resources. The common …

Household Outlet Monitoring And Control System, Michael Young

Computer Engineering

No abstract provided.

Wii-Mote Head Tracking: A Three Dimensional Virtual Reality Display, David Fairman

Computer Engineering

The goal of this project is to create a customizable three dimensional virtual reality display on a system available to any non-technical user. This System will use the infrared camera component of a standard Nintendo Wii-mote to track a user's head motions in all six major directions. The virtual reality will be a customizable image projected onto a screen or simply shown on a computer or TV monitor. In order to appear 3-dimensional, the image will continually change according to the position of the user's head. As the user moves their head to the left and right, portions of the …

Independent Set On Graphs With Maximum Degree 3, Iyad A. Kanj, Fenghui Zhang

Technical Reports

Let G be an undirected graph with maximum degree at most 3 such that G does not contain either of the two graphs shown in Figure 1 as a subgraph. We prove that the independence number of G is at least n(G)/3 + nt(G)/63, where n(G) is the number of vertices in G and nt(G) is the number of nontriangle vertices in G. We show an application of the aforementioned combinatorial result to the area of parameterized complexity. We present a linear-time kernelization algorithm for the independent set problem on graphs with maximum degree at most 3 that computes a …

The Future Of Digital Rights Management In Digital Video, Matthew Elcock

Technical Reports

The rise in the popularity of internet-based digital video has created a major revolution in the way consumers acquire content. Users no longer need to watch a television show live or obtain a physical disc in order to view a movie. However, this transition comes with a price: Digital Rights Management (DRM). Every digital video file requires a user to be locked into a particular combination of software, hardware, and business plan in order to be authorized for viewing purchased content. DRM was just as prevalent during the introduction of digital audio, but DRM was abolished from the format within …

Lavers Ranch Vineyard Design, A.J. Borba

BioResource and Agricultural Engineering

This senior project discusses the design of a vineyard irrigation system for Lavers Ranch in Glennville, Ca. The vineyard is 33 acres in the foothills of the Sierra Nevada Mountains and water will be provided for the system by three springs located on the ranch. This senior project discusses vineyard layout: vine direction, vine spacing, and emitters per vine. Using Microsoft Excel, a program will be developed that will give irrigation requirements for the conditions given by Lavers Ranch. Along with the Excel program final maps will be included with detailed information of the field requirements.

Forecasting Consumer Satisfaction For Vehicle Ride Using The Mahalanobis-Taguchi Gram-Schmidt Technique, Elizabeth A. Cudney, Kenneth Ragsdell, Kioumars Paryani

Engineering Management and Systems Engineering Faculty Research & Creative Works

Consumers assess and perceive quality and performance at the vehicle level, but important cost-effective decisions at the sub-system or component level must be made by the producer in order to economically satisfy consumer needs by providing affordable products. Consumers evaluate vehicle attributes such as ride, handling, roominess, braking, and acceleration. These vehicle level attributes are influenced by factors at all levels of the vehicle architecture, and these factors are often correlated. the goal of this research is to efficiently forecast consumer satisfaction measured as a function of available vehicle level performance data. This article presents the application of the Mahalanobis-Taguchi …

Adaptive Critics For Dynamic Optimization, Raghavendra V. Kulkarni, Ganesh K. Venayagamoorthy

Electrical and Computer Engineering Faculty Research & Creative Works

A novel action-dependent adaptive critic design (ACD) is developed for dynamic optimization. the proposed combination of a particle swarm optimization-Based actor and a neural network critic is demonstrated through dynamic sleep scheduling of wireless sensor motes for wildlife monitoring. the objective of the sleep scheduler is to dynamically adapt the sleep duration to node's battery capacity and movement pattern of animals in its environment in order to obtain snapshots of the animal on its trajectory uniformly. Simulation results show that the sleep time of the node determined by the actor critic yields superior quality of sensory data acquisition and enhanced …

Influence Of Morphology And Processing On Xps Characterisation Of Sro-Ca-Zno-Sio2 Glass, F. R. Laffir, A. W. Wren, Mark R. Towler

Chemical and Biochemical Engineering Faculty Research & Creative Works

A study was conducted to demonstrate the influence of morphology and processing on X-ray photoelectron spectroscopic (XPS) characterization SrO-Ca-ZnO-SiO₂ glass. The glass formulation being investigated was originally synthesized for developing a novel glass polyalkenoate cement (GPC). High resolution photoelectron spectra of Zn 2p, Ca 2p, Sr 3d, Si 2p, O 1s, and C 1s were recorded for the different forms of glass. It was observed that there was preferential enrichment of Zn²⁺ with an increase in the proportion of NBO for the investigated BT101 glass. The relative atomic concentration of Zn in BT101 glass was high and resulted …

Synthesis Of Pegylated Single Wall Carbon Nanotubes By A Photoinitiated Graft From Polymerization, Pu Zhang, David B. Henthorn

Chemical and Biochemical Engineering Faculty Research & Creative Works

A considerable amount of research has been devoted to carbon nanotubes because of their unique electrical, mechanical, optical, and chemical properties. Here, in this report, we introduce a novel, simple ultraviolet initiated "graft from" polymerization method to synthesize PEGylated carbon nanotubes. This grafting procedure significantly enhanced nanotube aqueous dispersibility and long-term stability in solution. Mass of grafted polymer chains was easily modulated by adjusting polymerization reaction time, and nanomaterials containing up to 80% polymer by weight were synthesized. Nanotube morphology was characterized by SEM, TEM before and after the functionalization. in addition, the covalent bonding of polymer chains to the …

Dielectrophoretic Separation Of Mouse Melanoma Clones, Ahmet C. Sabuncu, Jie A. Liu, Stephen J. Beebe, Ali Beskok

Bioelectrics Publications

Dielectrophoresis (DEP) is employed to differentiate clones of mouse melanoma B16F10 cells. Five clones were tested on microelectrodes. At a specific excitation frequency, clone 1 showed a different DEP response than the other four. Growth rate, melanin content, recovery from cryopreservation, and in vitro invasive studies were performed. Clone 1 is shown to have significantly different melanin content and recovery rate from cryopreservation. This paper reports the ability of DEP to differentiate between two malignant cells of the same origin. Different DEP responses of the two clones could be linked to their melanin content.

Distributed Generation: Issues Concerning A Changing Power Grid Paradigm, Scott G.M. Therien

Master's Theses

Distributed generation is becoming increasingly prevalent on power grids around the world. Conventional designs and grid operations are not always sufficient for handling the implementation of distributed generation units; the new generation may result in undesirable operating conditions, or system failure. This paper investigates the primary issues involved with the implementation of distributed generation and maintaining the integrity of the power grid. The issues addressed include power flow, system protections, voltage regulation, intermittency, harmonics, and islanding. A case study is also presented to illustrate how these issues can be addressed when designing distributed generation installation on an existent distribution system. …

Enhanced Light Extraction Efficiency From Gan Light Emitting Diodes Using Photonic Crystal Grating Structures, Simeon S. Trieu

Master's Theses

Gallium nitride (GaN) light emitting diodes (LED) embody a large field of research that aims to replace inefficient, conventional light sources with LEDs that have lower power, higher luminosity, and longer lifetime. This thesis presents an international collaboration effort between the State Key Laboratory for Mesoscopic Physics in Peking University (PKU) of Beijing, China and the Electrical Engineering Department of California Polytechnic State University, San Luis Obispo. Over the course of 2 years, Cal Poly’s side has simulated GaN LEDs within the pure blue wavelength spectrum (460nm), focusing specifically on the effects of reflection gratings, transmission gratings, top and bottom …

High Resolution Simulation Of Synthetic Aperture Radar Imaging, Cindy G. Romero

Master's Theses

The goal of this Master’s thesis is to develop a more realistic simulation of Synthetic Aperture Radar (SAR) that has the ability to image detailed targets, and that can be used for Automatic Target Recognition (ATR). This thesis project is part of ongoing SAR ATR research at California Polytechnic State University (Cal Poly) sponsored by Raytheon Space & Airborne Systems and supervised by Dr. John Saghri.

SAR is a form of radar that takes advantage of the forward motion of an antenna mounted on a moving platform (such as an airplane or spacecraft) to synthetically produce the effect of a …

Assessment Of Kentucky's Historic Truss Bridges, Lenahan O’Connell, Ted H. Grossardt, John Ripy

Kentucky Transportation Center Research Report

This study created an information base to improve decisions about the replacement or rehabilitation of historic truss bridges. During the first phase of the research, information on the history and design of the 109 bridges in the study was assembled. With the assistance of historic preservation professionals, 75 of those bridges were selected for further study for their potential for rehabilitation. During the second phase, the KTC research team, engineers from the KYTC bridge division, and 12 highway district engineers, who are responsible for the day-to-day care and maintenance of the bridges, evaluated the condition and functional context of the …

Travel Time Based Congestion Measures For Freeway Corridors, Mei Chen

Kentucky Transportation Center Research Report

Travel time based mobility measures have been increasingly used in highway performance analyses. Among them, Travel Time Index (TTI), Planning Time Index (PTI), percentage of travel under congestion (PTC), and buffer index (BI)have been identified as measures of particular interests in Kentucky. The objectives of this study are: (1) Calculate TTI, PTI, PTC, and BI for freeways within the TRIMARC coverage; and (2) Explore potential correlation between the reliability measures and incident characteristics (e.g., number of incidents, duration, severity, etc.). These analyses were performed for the years 2006-8 for each monitored segment and freeway corridor as well as for the …

Foundation Design For High Tension Cable Guardrails, John R. Rohde, Ryan J. Terpsma, Ling Zhu

Nebraska Department of Transportation: Research Reports

No abstract provided.

Information Hiding Using Stochastic Diffusion For The Covert Transmission Of Encrypted Images, Jonathan Blackledge

Conference papers

A principal weakness of all encryption systems is that the output data can be `seen' to be encrypted. In other words, encrypted data provides a 'flag' on the potential value of the information that has been encrypted. In this paper, we provide a novel approach to `hiding' encrypted data in a digital image. We consider an approach in which a plaintext image is encrypted with a cipher using the processes of `stochastic diffusion' and the output quantized into a 1-bit array generating a binary image cipher-text. This output is then `embedded' in a host image which is undertaken either in …

Developments In Intelligent Monitoring Of Concrete Structures, T. M. Chrisp, G. Starrs, W. J. Mccarter, E. H. Owens, S. V. Nanukuttan, Niall Holmes, L. Basheer

Conference papers

Deterioration in concrete comprises an initiation period and a propagation period. The initiation period is characterised by changes that occur within the concrete in response to the exposure environment and continues until a stage is reached when damage begins to propagate. The propagation period begins at a point in time defined when a particular event occurs (e.g. loss of steel passivity due to chloride ingress) and continues until a specified limit state is reached. The initiation and propagation stages of a deterioration process result from a complex interaction of physical, chemical and electrochemical phenomena. Prediction of the field performance of …

Review Of State Laws And Practices For Disposition Of Re-Aligned Or Bypassed Segments And Associated Row, Lenahan O'Connell, Ted Grossardt

Kentucky Transportation Center Research Report

This study identified the laws and practices of 11 state DOTs in regard to the transfer of responsibility for re-aligned or bypassed state highway system roads to local jurisdictions - usually cities or counties. Each state's approach to such transfers was identified by obtaining and analyzing the relevant state statutes and then conducting telephone interviews with strategically placed individuals at the associated DOT. Four states require local approval before the state can abandon a road. These four have a policy of obtaining written consent for the transfer of responsibility for maintenance and do so most often prior to construction of …

Roadway Related Tort Liability And Risk Management, Kenneth R. Agent

Kentucky Transportation Center Research Report

This workbook provides government employees background information related to tort liability and risk management. Past experience with lawsuits against government entities are summarized. The reasons for the lawsuits and results are analyzed. The objective is to provide an understanding of the basis for past claims so the number of future claims and awards can be reduced. This will result in the ultimate objective of reducing highway crashes.

Based on the results of the data analysis and the review of the background material, recommendations are made for consideration. Many of the recommendations deal with various types of documentation.

Improving Intersection Design Practices Final Report - Phase I, Nikiforos Stamatiadis, Adam Kirk

Kentucky Transportation Center Research Report

The purpose of this report is to document the development of the Intersection Design Alternative Tool (IDAT) developed for the Kentucky Transportation Cabinet. IDAT provides an automated objective design and evaluation approach of 14 alternative intersection designs to assist in the conceptual design of at grade intersections. The tool evaluates intersection operations, safety performance, bicycle/pedestrian accommodation and has the ability to assist access management implementation.

Analysis And Transformation Of Pipe-Like Web Mashups For End User Programmers, Kathryn T. Stolee

School of Computing: Dissertations, Theses, and Student Research

Mashups are becoming increasingly popular as end users are able to easily access, manipulate, and compose data from several web sources. To support end users, communities are forming around mashup development environments that facilitate sharing code and knowledge. We have observed, however, that end user mashups tend to suffer from several deficiencies, such as inoperable components or references to invalid data sources, and that those deficiencies are often propagated through the rampant reuse in these end user communities.

In this work, we identify and specify ten code smells indicative of deficiencies we observed in a sample of 8,051 pipe-like web …

Memento: Personal Scrapbook Android Application, Ryan Joseph Rosete

Computer Engineering

The Memento project focuses on providing Android phone users with a new alternative to capture memories. Its main purpose is to create an application that stores pictures and data on an Android phone. Users can view these saved entries for later use to recall what they have done in the past or show to others. The initial idea for this project stemmed from a personal interest in both scrapbooks and popular microblog services. The application aims to provide a new service that is currently not offered in the Android Market.

In order to create this application, there are two main …

Optimization Of P3ht-Pcbm Polymer Solar Cells Through Device Simulation And Manufacturing, James Boom

Computer Engineering

Given a good model and implementation of that model, computer simulation can be used to reduce the time and material costs of research. To this end I worked with other students to manufacture, test and simulate the single layer P3HT-PCBM solar cell. Using the data collected from this project, future work can then be done with the project's simulator to further optimize these types of solar cell devices.

In-Situ Monitoring And Testing Of Ibrc Bridges In Wisconsin, Christopher Foley, Baolin Wan, Carl Schneeman, Kristine Barnes, Jordan Komp, Junshan Liu, Andrew Smith

Transportation Reports with the Wisconsin Department of Transportation

This study examines two highway bridges constructed using novel fiber-reinforced polymer (FRP) composite stay-in-place formwork and an FRP grillage reinforcement system. Both bridge superstructures rely on the FRP components as bridge deck reinforcement. These bridges were monitored in-situ for a period of five years. The monitoring included a series of in-situ load test as well as non-destructive evaluation (NDE). Laboratory investigations accompanied and guided the load testing and NDE implemented. Finite element simulations were employed to evaluate the likely causes of premature deck cracking seen in the traditionally-constructed bridge and the FRP-component superstructures. The study identifies sources of potential deterioration, …