Engineering Commons^™

Application Of Signal Advance Technology To Electrophysiology, Chris M. Hymel

Dissertations and Theses (Open Access)

Medical instrumentation used in diagnosis and treatment relies on the accurate detection and processing of various physiological events and signals. While signal detection technology has improved greatly in recent years, there remain inherent delays in signal detection/ processing. These delays may have significant negative clinical consequences during various pathophysiological events. Reducing or eliminating such delays would increase the ability to provide successful early intervention in certain disorders thereby increasing the efficacy of treatment.

In recent years, a physical phenomenon referred to as Negative Group Delay (NGD), demonstrated in simple electronic circuits, has been shown to temporally advance the detection of …

Kalman Filtering With State Constraints: A Survey Of Linear And Nonlinear Algorithms, Daniel J. Simon

Electrical and Computer Engineering Faculty Publications

The Kalman filter is the minimum-variance state estimator for linear dynamic systems with Gaussian noise. Even if the noise is non-Gaussian, the Kalman filter is the best linear estimator. For nonlinear systems it is not possible, in general, to derive the optimal state estimator in closed form, but various modifications of the Kalman filter can be used to estimate the state. These modifications include the extended Kalman filter, the unscented Kalman filter, and the particle filter. Although the Kalman filter and its modifications are powerful tools for state estimation, we might have information about a system that the Kalman filter …

Investigating Pre-Breakdown Currents In Polymer Tantalum Capacitors, Githin Alapatt

All Theses

Poly(3,4-ethylenedioxythiophene) (PEDOT), a conducting polymer, has been used since
the 1990s for the cathode of tantalum capacitors, which have a tantalum anode, and a layer of
tantalum pentoxide as the dielectric. Such capacitors are referred to as Polymer Ta capacitors.
The first method, an in situ polymerization technique, used to deposit the polymer resulted in
capacitors with a significant leakage current and breakdown voltages near 50 V. The second
method, a pre-polymerization (pre-poly) technique, resulted in capacitors that have a much lower
leakage current and a higher breakdown voltage than the in situ capacitors.
In this thesis, an accurate measurement …

Parametric Instabilities For Vibratory Energy Harvesting Under Harmonic, Time-Varying Frequency, And Random Excitations, Christopher Stabler

All Theses

This effort investigates and evaluates the prospect of using parametric instabilities for vibratory energy harvesting. To that end, we consider a parametrically-excited piezoelectric cantilever beam and study its performance as an energy harvester under i) fixed-frequency harmonic excitations, ii) time-varying frequency excitations, and iii) band-limited Gaussian noise. In the case of fixed-frequency excitations, we use the Method of Multiple Scales to obtain approximate analytical expressions for the steady-state response amplitude and instantaneous output power in the vicinity of the first principle parametric resonance. We show that the electromechanical coupling and load resistance play an important role in determining the output …

Electromechanical Modeling And Analysis Of A Self-Excited Micro-Power Generator, Amin Bibo

All Theses

Micro-power generators (MPGs) are compact, scalable, and low-maintenance energy harvesting devices that capture and transform wasted ambient energy into electricity.
Such devices, which are currently being researched as a possible replacement for batteries, can act as a power source to maintain and allow autonomous operations of
remote low-power consumption sensors. This thesis introduces a novel MPG which transforms wind energy into electricity via wind-induced self-excited oscillations
of piezoelectric cantilever beams. The operation concept of the device is simple: similar to music-playing harmonica that create tones via oscillations of reeds when
subjected to air blow, the proposed device uses flow-induced self-excited …

Infrared Thermography And Ultrasonic Inspection Of Adhesive Bonded Structures, Overview And Validity, Suhas Vedula

All Theses

The work focuses on establishing a relationship between two different techniques of Nondestructive testing, namely Infrared Thermography and Ultrasonic Inspection. The integration of the two testing techniques is done with an expectation to achieve accurate characterization and determination of internal defects in adhesive bonded structures.
Experiments are done on sandwich samples with defects using various ultrasonic testing methods like pulse-echo and immersion techniques. The results thus obtained are documented and location of the defects is marked. The same samples are then tested using Infrared thermography to visualize the defects.
The results obtained by both the methods are compared to check …

Fuzzy Logic Approach To Stability Control, Jeffery Anderson

All Theses

Traditional Electronic Stability Control (ESC) for automobiles is usually accomplished through the use of estimated vehicle dynamics from simplified models. Starting with the conventional two degree-of-freedom vehicle model, one can estimate the vehicle states from the driver steering input. From this estimate, vehicle sideslip angle can be found and this is generally used with a threshold value to initiate a control action. The input/output relationship of the model depends heavily on the accuracy of the parameters used and various means to correct model inaccuracies. Specifically, these models depend on the tire cornering stiffness which is prone to change with age …

Hemocompatibility And Endothelialization Of Elastin And Collagen Scaffolds: The Role Of Plasma Proteins, Shear Stress And Integrins, Nithya Swaminathan

All Theses

Cardiovascular diseases are the leading cause of death worldwide as reported by the World Health Organization. Biomaterials have been extensively used in blood-contacting applications as heart valves, stents, grafts and catheters. However failure due to thrombosis hinders the long term patency and potential of these devices. Purified elastin scaffolds derived from porcine arteries as potential vascular graft materials are being investigated in our laboratory. In this study, we investigated the influence of factors such as shear stress and the presence of plasma proteins on the platelet response, and endothelial cell retention on purified elastin scaffolds to evaluate their hemocompatibility.

Elastin …

Automation Of Non-Destructive Testing Techiniques Used For Finding Defects, Bhanu Singh

All Theses

This master thesis focuses on the automation and fusion of non-destructive testing methods. The research includes the fusion of non-destructive testing methods done with infrared micro-bolometer and ultrasonic transducers. A control system which utilized mechanical, electrical, electronic systems and computer aided technologies was developed. Conveyor belt system, PLC (programmable logic controller), XYZ mechanism and different sensors were utilized to automate the process of capturing images and a communication link was set up between thermal camera and system that controls the ultrasonic testing apparatus, to integrate the two techniques. The test results from the thermal camera were utilized in ultrasonic testing. …

Sensor Based Nitrogen Management For Cotton Production In Coastal Plain Soils, Wesley Porter

All Theses

The main objective of this four year study was to develop, refine, and employ sensor-based algorithims to determine the mid season nitrogen requirements for production of irrigated and dryland cotton (Gossypium hirsutum L.) in Coastal Plains soils. The secondary objective of the project was to develop and test equipment for variable rate application of nitrogen to commerical cotton fields utilizing the developed algorithim. Two different production fields at Clemson's Edisto Research and Education Center near Blackville, SC were used. One field, equiped with an overhead irrigation system, was used during the 2007 and 2010 production seasons to develop the algorithm …

Modeling And Optimization Of A Plug-In Hybrid Electric Vehicle, Venkat Vijay Kishore Turlapati

All Theses

Today, the world is faced with a situation where new technologies have to be developed to decrease the dependence on natural non-renewable resources. Each day, as the demand for non-renewable resources increases, it puts great pressure on the scientific fraternity to develop new technologies that are aimed at reducing this dependence.
Today's road traffic plays a major part in the energy consumption worldwide. Hence it is imperative that we develop environmentally friendly solutions to this problem that arises in the transportation sector. Hybrid vehicle is one of the alternatives that can be seen as a viable solution to this energy …

Induction Assisted Thermography For Inspection Of Micro Defects On Sheet Metals, Sree Pamidi

All Theses

The work focuses on Induction assisted Thermography as a non-contact and non-destructive method of Inspecting micro defects on sheet metals used for making automotive body panels. Induction heating as a source of excitation to elevate the temperatures of sheet metals for uniform heating and detect ability of the defect is the main objective of the study.
Experiments are done on sheet metal samples with defects using excitation techniques like Pulse and Electromagnetic Induction. The thermal images obtained from the infrared camera are used to quantitatively analyze the detect ability of defects on sheet metals. The limitations of using Pulse technique …

Detecting Piecewise Linear Networks Using Reversible Jump Markov Chain Monte Carlo, Akshay Apte

All Theses

This work proposes a piecewise linear network model to approximate structures observed in an image. An energy function is used to capture the characteristics of the structure. The energy function consists of two parts: the prior energy term and the data energy term. The prior energy term is calculated using prior information about the structures of interest. The data energy term is calculated using observations made from the image. The energy function is minimized using Reversible Jump Markov Chain Monte Carlo (RJMCMC) to get the approximate centerline of the structure. The algorithm was tested on a database of $150$ images …

Design Method Development For The Design Of Traction Systems, Avinash Kolla

All Theses

The objective of this research is to develop a design method for rapid exploration of traction concepts primarily for off-road vehicles. Different approaches available to achieve this objective are discussed and compared, such as computational, analytical, and physical methods. Computational approaches are based on simulations performed using Finite Element Method (FEM), Discrete Element Method (DEM), and combined Finite Element-Discrete Element (FE-DE) methods. Analytical approaches are based on closed form mathematical models developed by previous researchers based on the theory of plasticity. Physical approaches include fabrication and testing of prototypes at different levels of abstraction. This thesis compares these different approaches …

The Effects Of Physical Factors On The Adsorption Of Synthetic Organic Compounds By Activated Carbons And Activated Carbon Fibers, Hatice Kose

All Theses

Activated carbons (ACs) and activated carbon fibers (ACFs) have been extensively used for the removal of synthetic organic compounds (SOCs) that have been found to be toxic, carcinogenic, mutagenic or teratogenic. Adsorption of these compounds on ACs and ACFs are controlled by both physical factors and chemical interactions, which depend on the characteristics of the adsorbent (surface area, pore size distribution (PSD), and surface chemistry), the nature of the adsorbate (molecular weight and size, functional groups, polarity, solubility), and the condition of the background solution (pH, temperature, presence of competitive solutes, ionic strength). Since there are several mechanisms that can …

Remote Usability Testing - A New Approach Facilitated By Virtual Worlds, Kapil Chalil Madathil

All Theses

Synchronous remote usability testing, involves a facilitator conducting a usability test in real time, interacting with a participant who is remote. This study proposes a new methodology for conducting these studies using a three-dimensional virtual world, Wonderland, and compares it with two other commonly used synchronous usability test methods: the traditional lab approach and WebEx, a web-based conferencing and screen sharing approach.
The study involved 48 participants in total, 36 test subjects and 12 test facilitators. These 36 were equally divided among the three environments with the 12 test facilitators being paired with one participant in each of the environments. …

Influence Of Iso-Structural Substitutions On Properties Of Ge(As,Sb)(S,Se) Glasses, Guillaume Guery

All Theses

Chalcogenide glasses possess exceptional infrared transparency, large non-linear refractive indexes and low phonon energies, making them good candidates for infrared optical applications. Previous studies in the Ge-Sb-S glass system have shown an increase in the nonlinear refractive index with an iso-structural substitution of two- coordinated selenium (Se) for sulphur (S) and variation of other physical properties with substitution of other iso-structural species such as three-coordinated arsenic (As) for antimony (Sb). The role of such iso-structural exchange on properties important to the thermo-, visco- and mechanical attributes of glasses in the Ge-As/Sb-S/Se system has not been thoroughly evaluated and form the …

Evaluating Transit Systems In A University Environment The Clemson University Case Study, Katerina Bartman

All Theses

With the economy in a slow recovery, enrollment in higher education is
increasing. This means that universities across the country must accommodate these new students, their vehicles, and local transportation needs. Campus setting and ambiance is a treasured quality on a university campus resulting in the approval of additional surface lots and parking garages being difficult or restricted. To combat the increased number of single occupancy vehicles, universities are developing and encouraging the use of multimodal transportation by providing pedestrian, bicycle, and public transportation facilities along with providing users with the information necessary to make the optimal modal choice (Boyles, …

Alkali Silica Reaction Under The Influence Of Chloride Based Deicers, Purvi Desai

All Theses

Highways form the backbone of transportation in United States. As a result, issues related to distress in pavements and use of chemicals on pavement forms one of the major focus areas of highway agencies. One of the forms of distress in concrete pavements is Alkali silica reaction (ASR). External source of alkalis in the form of deicing chemicals play a key role in accelerating ASR. Sodium chloride or Rock salt is one of the oldest forms of deicers. Several research studies have been done on ASR under the influence of sodium chloride and calcium chloride. Limited information is available on …

In Vitro Analysis Of Auto-Loom Woven Test Patches For Hernia Repair, Bryant Mersereau

All Theses

Hernias are defects in the layers of the abdominal wall that can cause discomfort or pain and lead to serious health problems if left untreated. A significant portion of the world's population is afflicted by hernia formation, and the cost of treating those affected is in the billions of dollars in the US alone. The current best practices for repairing hernias involve the surgical implantation of polymeric meshes over and around the defect site. The mesh, acting as a synthetic replacement for the damaged abdominal wall layers, provides a barrier to further visceral protrusions through the defect, a support framework …

Catalysis Of Ethanol Synthesis From Syngas, Jia Gao

All Dissertations

Catalytic synthesis of ethanol and other higher alcohols from CO hydrogenation has been a subject of significant research since the 1980s. The focus of this research is to establish a better fundamental insight into heterogeneous catalysis for CO hydrogenation reactions, in an attempt to design the best catalysts for ethanol synthesis.
It has been reported widely that promoted Rh-based catalysts can exhibit high selectivity to C2+ oxygenates during CO hydrogenation. The doubly promoted Rh-La-V/SiO2 catalysts exhibited higher activity and selectivity for ethanol and other C2+ oxygenates than singly promoted catalysts. The better performance appears to be due to a synergistic …

Nonlinear Control And Estimation Techniques With Applications To Vision-Based And Biomedical Systems, Nitendra Nath

All Dissertations

This dissertation is divided into four self-contained chapters. In Chapter 1, a new estimator using a single calibrated camera mounted on a moving platform is developed to asymptotically recover the range and the three-dimensional (3D) Euclidean position of a static object feature. The estimator also recovers the constant 3D Euclidean coordinates of the feature relative to the world frame as a byproduct. The position and orientation of the camera is assumed to be measurable unlike existing observers where velocity measurements are assumed to be known. To estimate the unknown range variable, an adaptive least squares estimation strategy is employed based …

Development Of A Finite Element Model To Predict The Behavior Of A Prototype Wheel On Lunar Soil, Marisa Orr

All Dissertations

The All-Terrain Hex-Limbed Extra-Terrestrial Explorer (ATHLETE) is a mobile lunar lander under development by the National Aeronautics and Space Administration's Lunar Architecture Team. While previous lunar missions have lasted only a few days, the ATHLETE is designed to last for 10 years, which will enable a sustained U.S. presence on the moon and exploration of the more treacherous regions which are not suitable for landing. Because the ATHLETE will carry entire astronaut habitats, its six wheels must be carefully designed to support a large load on soft lunar soil efficiently.
The purpose of this thesis is to develop a finite …

Estimation And Control Of Robotic Radiation-Based Processes, Fan Zeng

All Dissertations

This dissertation presents a closed-loop control and state estimation framework for a class of distributed-parameter processes employing a moving radiant actuator. These radiation-based processes have the potential to significantly reduce the energy consumption and environmental impact of traditional industrial processes. Successful implementation of these approaches in large-scale applications requires precise control systems. This dissertation provides a comprehensive framework for: 1) integration of trajectory generation and feedback control, 2) online distributed state and parameter estimation, and 3) optimal coordination of multiple manipulated variables, so as to achieve elaborate control of these radiation-based processes for improved process quality and energy efficiency.
The …

Prediction Of Liquid Crystalline Content And Molecular Structures Present In Carbonaceous Pitches, Ward Burgess

All Dissertations

ABSTRACT
Previous research at Clemson has shown that multistage, packed column, supercritical extraction (also called dense-gas extraction, or DGE) of petroleum pitches is a promising technique for the production of carbonaceous precursors that can be processed into a variety of carbon products, including activated carbons and high thermal conductivity carbon fibers. As the existence (or lack thereof) of a liquid crystalline phase, or mesophase, plays a key role in establishing the suitability of a potential precursor material for a given application, we developed the SAFT-LC (liquid crystal) equation of state by combining Maier-Saupe theory for multicomponent mixtures with the SAFT …

Probing The Mechanisms Of Platelet Adhesion To Adsorbed Plasma Proteins, Balakrishnan Sivaraman

All Dissertations

Despite over three decades of research in blood-material interactions, the biomaterials field has been unsuccessful in developing a truly non-thrombogenic biomaterial. This is due to an incomplete understanding of the factors underlying biomaterial-associated thrombosis, especially the mechanisms mediating the interactions of platelets with the adsorbed plasma protein layer(s) on the implant surface. The work presented here is motivated by the primary goal of delineating these mechanisms, and understanding the platelet receptors involved, as well as the domains/amino acid sequences they bind to in the protein molecules.
It is critical to differentiate between the amount and the conformation of the adsorbed …

Modeling Of Cell Transfer And Process-Induced Cell Damage In Laser-Assisted Cell Direct Writing, Wei Wang

All Dissertations

Laser-assisted cell direct-write technique has been obtaining more and more attention in different biomaterial direct writing applications. A typical laser-assisted cell direct-write process can be divided into two main stages: the cell droplet ejection and cell droplet landing. The objective of this study is to model the cell mechanical profile during the cell droplet ejection and cell landing and further model the cell damage.
The possible cell damage during the droplet ejection process in laser-assisted cell direct writing may come from two different sources: the phase explosion-induced bubble expansion and the thermoelastic stress wave. The bubble expansion-induced stress wave is …

Design Of Advanced Ion-Exchange Membranes And Their Performance Assessment For Downstream Chromatographic Bioseparations, Bharatkumar Bhut

All Dissertations

This doctoral research focuses on the design, development and characterization of advanced ion-exchange membranes and their performance evaluation as process chromatography media for downstream bioseparations. Chromatography is a widely used unit operation in the biopharmaceutical industry for the downstream purification of protein therapeutics. The rapid developments in biotechnology and the pharmaceutical potential of biomolecules have increased the worldwide demand for protein therapeutics dramatically. Considering that 50−90% of the total cost of bioprocesses is due to the downstream recovery and purification, high-productivity and high-resolution separation techniques that will enable cost-effective production are essential to the biopharmaceutical industry. In recent years, membrane …

Protocols For Dynamic Spectrum Access In Cognitive Radio Networks, Steven Boyd

All Dissertations

Spectrum access protocols permit secondary users to transmit on frequency bands that are not being utilized by the primary owners. A cognitive radio that wishes to transmit in a band must first decide if the band is available (i.e., not being used by the owner) and then it must periodically re-evaluate the band's availability once it begins transmitting in the band to ensure that a signal from a primary owner has not emerged. To accomplish these tasks, spectrum access protocols employ periodic sensing of the channel. Frequent sensing intervals are required to ensure that cognitive radios wishing to access the …

Simulation And Mathematical Modeling To Support Community-Wide Evacuation Decisions For Multiple Population Groups, Jun Duanmu

All Dissertations

Evacuating a large population from an at-risk area has been the subject of extensive research over the past few decades. In order to measure trip completion and total evacuation times accurately, most researchers have implemented some combination of simulation and optimization methods to provide vehicular flow and congestion data. While the general at-risk population comprises the majority of travelers on the road network, there are often specific groups to consider when assessing the ability to evacuate an entire population. In particular, healthcare facilities (e.g., hospitals) may require evacuation, and the trip times may become an important health issue for patients …