Engineering Commons^™

Attribution Of Global Warming, Jun-Ki Choi, Bhavik R. Bakshi

Mechanical and Aerospace Engineering Faculty Publications

The Encyclopedia of Global Warming and Climate Change helps readers learn about the astonishingly intricate processes that make ours the only planet known to be habitable. These three volumes include more than 750 articles that explore major topics related to global warming and climate change—ranging geographically from the North Pole to the South Pole, and thematically from social effects to scientific causes.

Manufacturing Of Transparent Composites Using Vacuum Infusion Process, Jason Niles Gallagher

Masters Theses

"Glass is the most commonly used transparent material. However, glass is not suitable where low weight and high strength are required. For many applications there exists a need for mechanically strong composite materials of high optical quality and transparency equivalent to window glass. Glass fiber reinforced transparent composite is a viable solution. Transparency is maintained by precisely matching the refractive index of the matrix with that of the glass fiber. Aircraft canopies and transparent armor can be potential applications for this new class of materials.

In the present work, transparent composites are manufactured using vacuum infusion process. Both rectangular glass …

Block Level Link Path Design And Multilayer Via Transition Model Assembly Using S-Parameters, Francesco De Paulis

Masters Theses

"In high-speed data communication systems the complexity of link path between transmitters and receivers present a challenge for designers to maintain an acceptable bit error rate. An approach is presented in this thesis to design the link path on a block-by-block basis. The unique advantage of this approach lies on the physics-based model of each block, which then relates performance to geometry and makes design improvement and optimization possible. A tool based on the manipulation of frequency domain data has been designed to help in the design and analysis process of fast communication systems. It accepts as inputs the frequency …

Design For Manufacturing For Friction Stir Welding, Harish Bagaitkar

Masters Theses

"This thesis is divided in two parts. In the first part, technical feasibility of implementing Friction Stir Welding (FSW) for automobile chassis fabrication is discussed using a case study. In the case study, Design for Manufacturing (DFM) principles are applied to manufacture an aluminum automobile chassis. Various DFM issues such as Tool Accessibility Issue, Joint Configuration Issue, and Fixture Support Issue along with relevant guidelines such as component geometry change and component elimination are discussed in the first section. Results show that more than 50% of the chassis joints can be welded using FSW technique. The second part of the …

A Laboratory Study Of Struvite Precipitation For Phosphorus Removal From Concentrated Animal Feeding Operation Wastewater, Sushmita Dhakal

Masters Theses

"Struvite precipitation occurs spontaneously in many wastewater treatment facilities as a nuisance. However, struvite precipitation is now being studied as a method to concurrently treat high phosphorus wastewaters and generate a valuable product. Many factors influence the precipitation of struvite such as component -ion molar ratios, pH, aeration, solubility, solids and mixing energy. In the present work, struvite precipitation in the actual swine wastewater was studied by strategically controlling aeration, pH, and mixing"--Abstract, page iv.

Application Of Product Family Design For Engineered Systems In Changing Market Space, Mohit Goswami

Masters Theses

"The focus of this paper is on the design of an engineered system for a changing market space. Due to the dynamic nature of the customer requirements, the specification of product offerings in a particular market may change. Manufacturers need to strategically design their product portfolio in such a way that their profitability is maximized, while deploying the right number of platforms necessary for deriving product variants. Depending on the system architecture, subsystems can be classified into one of the two types: scalar subsystems and modular subsystems. Each subsystem is defined by various parameters, performance criteria, and physical compatibility constraints. …

Derivation Of New Double-Input Dc-Dc Converters Using The Building Block Methodology, Karteek Gummi

Masters Theses

"In most power electronic systems, the instantaneous input and output power vary by time and are not exactly identical with each other. Hence, providing a good match between them is a complicated task to deal with if not impossible. Furthermore, due to the wide variation range of the processed power, the overall efficiency of the system is not high. The solution is to hybridize the system using an energy storage unit like in hybrid electric vehicles, power factor correction systems, and photovoltaic systems. Multi-input converters play a key role in such hybridized systems, where it is required to have more …

Defect-Tolerance And Testing For Configurable Nano-Crossbars, Mandar V. Joshi

Masters Theses

"Moore's Law speculated a trend in computation technology in terms of number of transistors per unit area that would double roughly every two years. Even after 40 years of this prediction, current technologies have been following it successfully. There are however, certain physical limitations of current CMOS that would result in fundamental obstructions to continuation of Moore's Law. Although there is a debate amongst experts on how much time it would take for this to happen, it is certain that some entirely new paradigms for semiconductor electronics would be needed to replace CMOS and to delay the end of Moore's …

Indication Of Cylinder Pressure Rise Rate By Means Of Vibration And Acoustic Emissions Of An Internal Combustion Engine, Jeffery A. Massey

Masters Theses

"The focus of this study is to investigate the ability of the vibration and acoustic emissions of an internal combustion engine to indicate the cylinder pressure rise rate (PRR). Investigations are conducted on both a small-single cylinder spark-ignition (SI) engine and a larger multi-cylinder compression-ignition (CI) engine. Vibration measurements were made on both engines, however only acoustic measurements were made on the SI engine. Specific vibration and acoustic frequency bands were identified as correlating to energy generated from combustion and energy generated by cylinder cavity resonances"--Abstract, page iii.

Fabrication Of Soy Oil Epoxy Resin Based Composites, Vinay Prabhakar Pai

Masters Theses

"A renewable resource derived epoxidized ester - Epoxidized Allyl Soyate (EAS) yields a versatile epoxy resin system that can be used in pure form combination with bis-phenol epoxy systems to obtain high strength composite materials. EAS containing composites materials exhibit higher toughness and impact resistance than the traditional bis-phenol epoxy composites. These resin systems were found to be compatible with different fibers and screens such as glass fibers, glass mats, carbon fibers and metallic wire screens including those obtained from an automobile tire recycling process. The materials were tested for mechanical properties including tensile and flexure strengths. The highest tensile …

Performance Of Fire-Damaged Prestressed Concrete Bridges, Wendy Leann Moore

Masters Theses

"The purpose of this experimental program was to develop and analyze the effects of fire damage on prestressed concrete bridges. Flexural strength and serviceability of the bridge were measured by inputting fire damaged data into a parametric study spreadsheet consisting of a typical 3-span continuous prestressed concrete bridge. Data was obtained by exposing two types of specimens to different levels of elevated temperatures and then cooling them at room temperature to simulate fire damage. The two specimen types were prestressing strands which were tested in tension and concrete blocks with a single prestressing strand embedded in the center, which were …

Hazards Assessment Of St. Charles County - Earthquakes And Floods, Amy Lynn Krauch

Masters Theses

"Located on the northernmost limits of the St. Louis metropolitan area, St. Charles County has been, and continues to be, one of the fastest-growing counties in the country. The county consists of several major cities featuring extensive industry, retail, and agriculture. Bounded by the Missouri River on the south and the Mississippi River on the north and east, St. Charles County is predominantly flat, low-lying terrain at great risk to periodic flooding. The county is also well within the area of influence for several local seismic zones, increasing the susceptibility to earthquake damage. Given the apparent risk to both flood …

Business Risk In Early Design: An Approach, Rahul Basavaraj Patil

Masters Theses

"The Business Risk in Early Design (B-RED) method is a tool used to determine the potential risks in business, in the early business development stages. In order to launch a successful business in today's competitive market environment, the business should equip itself to face the risks involved in business. If the potential risks are identified even before the launch of the business, then there is an opportunity to avert risks with little or no impact to the budget and schedule. The B-RED method presented in this thesis helps entrepreneurs and people with little or no experience in business to identify …

Adaptive Modulation For Cognitive Radios, Gaurav Sharma

Masters Theses

"This thesis examines the benefits of using adaptive modulation in terms of spectral efficiency and probability of bit error for cognitive radio networks. In channels that fluctuate dynamically over time, systems that are based upon the conventional methods of fixed modulation formats do not perform well. Adaptive modulation provides many parameters that can be adjusted relative to the channel fading, including data rate, transmit power, instantaneous BER, symbol rate, and channel code rate or scheme. In this thesis, a systematic study on the increase in spectral efficiency obtained by optimally varying combinations of the modulation formats for a cognitive radio …

Formulating Hedging Strategies For Financial Risk Mitigation In Competitive U.S. Electricity Markets, Karthik Viswanathan

Masters Theses

"The challenges currently facing participants in the competitive electricity markets are unique and staggering: unprecedented price volatility, fluctuations in the demand, a lack of historical market data on which to test the new modeling approaches, increased competition and continuously changing regulatory structure...Electricity plant owners and purchasers of electricity may benefit from various techniques to manage price volatility. For electricity, however, no futures market is actively traded. The electricity forward market in NYMEX is in its nascent stage and is low in liquidity. Producers and purchasers of electricity may find cross-hedging electricity with natural gas futures contracts to be effective in …

Fabrication Of Long-Period Fiber Gratings By Co₂ Laser Irradiation For High Temperature Applications, Tao Wei

Masters Theses

"Long period fiber gratings (LPFG) have unique advantages such as small insertion loss, low retro-reflection, good sensory property and low cost fabrication. LPFGs have found many applications in optical fiber communications as well as in optical fiber sensors. Recently, high-performance LPFGs have been successfully fabricated by CO₂ laser irradiations. The unique thermal stability enables many potential sensing applications in high temperature environments. In this thesis...two chemical sensing applications of LPFG were demonstrated. In the first one, the ambient refractive index sensing ability of bare LPFG was examined. The experimental data showed a good agreement with the simulation results. In the …

Laboratory Analysis Of Small Strain Moduli In Compacted Silts, David M. Weidinger

Masters Theses

"Soil compaction quality control accounts for a significant portion of geotechnical practice. Often the performance of a roadway can be directly linked to the quality of the compacted subgrade. A poor subgrade can result in weak areas in the road causing excessive deflections at the surface, ultimately leading to a pot hole or uneven surface and an unpleasant ride for the travelers. Vehicles passing over a section of highway causes small strains in the founding soil. These strains accumulate over time. A better understanding of how the compacted soil responds at small strains could shed light on improving the quality …

Numerical Study Of Energy Utilization In Nozzle/Plume Flow-Fields Of High-Speed Air-Breathing Vehicles, Althea Grace Wilson

Masters Theses

"Focused local energy deposition in both internal and external flow-fields associated with high-speed aerospace vehicles can provide many system level benefits. This study specifically analyzes the effects of targeted (local) energization of the flow in the nozzle and afterbody flow-field regions of a hypersonic lifting body configuration. Benefits are shown to include the generation of a favorable vehicle pitching moment (nose-down) increment associated with such energy deposition and a reduced local and overall thermal load in both combustor and nozzle for all cases examined. These results have been obtained by modeling the nozzle/afterbody region of a simple generic 2-D wave-rider/lifting …

Analysis Of Access-To-Space Missions Utilizing On-Board Energy Management And Entropic Analysis, Tyler Winter

Masters Theses

"The overall objective of this study is the thermodynamically consistent quantification of second-law and performance losses for vehicle configurations implemented or suggested for access-to-space missions and the development of the relationships between the mission entropy generation and overall mission performance. The detailed theory which allows thermodynamically rigorous loss accounting (entropy generation and direct relationship to vehicle performance) is developed and discussed for aerospace vehicles. A full vehicle trajectory code utilizing simplified models for multi-stage rockets and air-breathing propulsion systems is developed and validated specifically for use as a testbed for second law-based theory and concepts. Results are shown in which …

Experimental Validation Of An Integrated Frp And Visco-Elastic Hardening, Damping, And Wave-Modulating System For Blast Resistance Enhancement Of Rc Columns, Brian Henry Wood

Masters Theses

"In today's society, terrorist attacks and accidental explosions pose a major threat to critical infrastructure. Vulnerable to blast loading, structures must be rehabilitated to ensure structural stability and protect human life. The goal of this study is to develop and validate a sandwich composite technology for column retrofitting. The new technology consists of an inner fiber reinforced polymer (FRP) sheet, an outer FRP sheet, and a visco-elastic (VE) layer sandwiched between the two FRP sheets. The inner FRP sheet is wrapped around an existing column for confinement, while the outer FRP sheet is for anchoring of the VE layer into …

Femtosecond Laser Micro-Structuring Of Silicon Wafer In Water Confinement, Songping Wu

Masters Theses

"This thesis investigates the use of femtosecond laser induced surface morphology on silicon wafer surface in water confinement. Unlike irradiation of silicon surfaces in the air, there are no laser induced periodic structures, but irregular roughness is formed when the silicon wafer is ablated under water. Interestingly, a particular parameter combination enables a smooth surface, which can improve the surface quality of micro-machining products. This thesis first investigates the single ablation and multi-pulse ablation processes in order to study the effects of laser parameters on ablation morphology, as well as the basic physics and mechanism of the laser-material interaction process …

Electromagnetic Modeling Of Distributed Coaxial Cable Crack Sensors In Reinforced Concrete Members, Mei Wang

Masters Theses

"Distributed crack sensors were recently developed with coaxial cables that are composed of inner and outer conductors as well as dielectric layer in between. These sensors were designed based on the change in topology of the cable outer conductor structure under strain effects. Various tests of reinforced concrete (RC) beams and columns indicated that the newly designed sensors are 10~50 times more sensitive than commercial cables to the longitudinal elongation applied on their cable structures. The spatial resolution of the sensors is approximately 50 mm. Limited numerical simulations with the transmission line theory and the finite difference time domain model …

Individual-Based Artificial Ecosystems For Design And Optimization, Shivakar Vulli

Masters Theses

"Individual-based modeling has gained popularity over the last decade, mainly due to the paradigm's proven ability to address a variety of problems seen in many disciplines, including modeling complex systems from bottom-up, providing relationship between component level and system level parameters, and discovering the emergence of system-level behaviors from simple component level interactions. Availability of computational power to run simulation models with thousands to millions of agents is another driving force in the widespread adoption of individual-based modeling. This thesis proposes an individual-based modeling approach for solving engineering design and optimization problems using artificial ecosystems"--Abstract, page iii.

Development Of A Gis-Based Seismic Hazard Screening Tool, Andrew J. Wilding

Masters Theses

"Geotechnical earthquake engineering hazards have consequences that are difficult to mitigate, especially for infrastructure systems with multiple and distributed components. In the last few decades significant progress has been made to provide more accurate and useful methods to evaluate hazards for complex systems. One of these advances involves the application of spatial analysis and geographic information systems (GIS), for not only presenting data as maps, but also providing more practical and usable solutions, such as calculating the hazard potential with spatial distribution. This thesis studies the evaluation of geotechnical earthquake engineering hazards within a GIS environment, using borehole-specific data and …

Asynchronous Nanowire Crossbar Architecture For Manufacturability, Modularity And Robustness, Ravi Bonam

Masters Theses

"This thesis spotlights the dawn of a promising new nanowire crossbar architecture, the Asynchronous crossbar architecture, in the form of three different articles. It combines the reduced size of the nanowire crossbar architecture with the clock-free nature of Null Conventional Logic, which are the primary advantages. The first paper explains the proposed architecture with illustrations, including the design of an optimized full adder. This architecture has an elementary structure termed as a Programmable Gate Macro Block (PGMB) which is analogous to a threshold gate in NCL. The other two papers concentrate on mapping and placement techniques which are important due …

Fault Propagation Timing Analysis To Aid In The Selection Of Sensors Fro Health Management Systems, Jeremy Johnson

Masters Theses

"Sensor data is processed to assess performance and health of complex systems. Proper sensor selection, placement, and implementation are critical to build an effective health management system. For complex systems in which the timely assessment of the health is desired to avoid expensive consequences of failure, sensor placement is vital. The ability to identify a critical failure early is completely dependent on sensor location within the fault propagation path. A strategy for assessing a sensor suite with respect to timely critical failure detection is presented in this thesis. To illustrate the strategy, Fault Propagation Timing Analysis (FPTA) will be performed …

A Systematic Approach To Project Portfolio Selection For Economic Development In Municipalities: A Case Study In Vienna, Missouri, Amanda Danielle Alpaugh

Masters Theses

"Economic development is essential for the survival of all municipalities in the United States. Economic growth, created through project implementation, brings new capital into municipalities by increasing the tax base. Smaller municipalities often struggle to implement projects that promote economic growth. These municipalities run into problems because they lack resources to hire an economic consultant and capabilities to independently complete the strategic planning process. This thesis describes an easy-to-use and easy-to-implement systematic ten-step approach to project portfolio selection for economic growth within smaller municipalities...The ten-step approach was employed in a case study performed in Vienna, Missouri. The case study involved …

Via Transition Modeling And Charge Replenishment Of The Power Delivery Network In Multilayer Pcbs, Matteo Cocchini

Masters Theses

"In the first article of this thesis, the charge delivery in the power distribution network for printed circuit board has been analyzed in the time-domain. Performing all the simulations and analyzing the PDN physics and modeling, I contributed to a better understanding of the time-domain decoupling mechanism. The second paper studies the noise coupling sing a segmentation approach combined with a via-to-antipad capacitance model and a plane-pair cavity model. Building equivalent circuit models as well as analyzing design strategies, I contributed to a new approach for the PDN analysis in multilayer PCBs. The third article discusses how to estimate the …

Evaluation Of Su8 And Ruthenium Oxide Materials For Microfluidic Devices, Margaret Theresa Audrain

Masters Theses

"This thesis investigates two materials, SU8 photoresist and RuO₂, for possible incorporation into a self-calibrating microfluidic biosensor. The negative, epoxy based photoresist SU8 has been widely used in the fabrication of micro-electro-mechanical systems (MEMS) devices. This is due to its many desirable features that make it a suitable material for a wide variety of MEMS applications. The effects cross-linking (exposure dose) and bonding time have on bond strength and plasma modification of the SU8 surface were investigated as well as the bond strength of etched SU8. It was shown that adhesive bonding was an effective method of bonding, with bond …

Carbon Credits And Energy Subsidies In Economic Decision Making For Confined Animal Feedlot Operation Waste Treatment, Taresh Grover

Masters Theses

"Released waste into the environment has always had a societal cost. Current issues with swine waste suggest that improved treatment is needed as agricultural production has become more industry-like and also as we now globally value the mitigation of global warming. The current need for and the economic support of advanced waste treatment has converged for animal agriculture, and now improved waste treatment is possible with concurrent economic benefit through alternative energy and carbon emissions. Recent changes have resulted in renewal of interest in anaerobic digestion (AD) technology with methane capture and energy production. An economic model was constructed to …