Engineering Commons^™

Introducing Freshmen To Construction Estimating And Scheduling Using K'Nex Bridge Kits, Carol Considine, Vernon Lewis

Engineering Technology Faculty Publications

The College of Engineering and Technology at Old Dominion University has developed project-based courses for freshmen engineering students in order to engage them in engineering early with the goal of increasing retention. The courses are divided into three five-week modules that are distributed among the various departments within the college. The Engineering Technology department is responsible for two of the five week modules. One module is comprised of all the engineering technology curriculums; civil, electrical and mechanical, and the other module is strictly a civil engineering technology project.

The civil engineering technology project is focused on the construction industry. Students …

Managing A Distance-Learning Eet Laboratory Course Using Collaboration Software, Steve Hsiung, John Hackworth, Richard Jones, June Ritchie

Engineering Technology Faculty Publications

Methods of managing various distance learning EET laboratory courses using collaboration software are detailed. Particular emphasis is given to different types of collaboration software, advantages and disadvantages of each, and student and faculty feedback on the effectiveness of each.

Identifying University Minors To Support The Construction Specialization Area Within A Civil Engineering Technology Program, Vernon Lewis, Carol Considine

Engineering Technology Faculty Publications

Construction programs at many universities are diversified and provide students with opportunities to examine topic areas that include mechanical and electrical systems, safety, business administration, residential construction, real estate, and management. It is impossible for small civil engineering technology programs with a construction emphasis to encompass all of these expertise areas. As industry looks for students with a knowledge base in these areas, it is incumbent upon programs to find avenues to provide these educational opportunities to their students.

To meet the upper division general education requirements for Old Dominion University, students must have either a minor, second major or …

Multi-Phase Flow Analysis In Oil And Gas Engineering Systems And Its Modelling, Orlando F. Ayala, Luis F. Ayala, Orlando M. Ayala

Engineering Technology Faculty Publications

[Introduction] Two-phase flow is very common in industrial processes and its applications were already in use in ages as remote as the era of Archimedes. At the present time, many industrial processes rely on multi-phase phenomena for the transport of energy and mass or for material processing. During the last century, the nuclear, chemical and petroleum industries propelled intense research activity in the area. Their efforts have been aimed at the demystification of the mechanisms taking place during this complex flow situation.

Using Building Energy Simulation And Geospatial Modeling Techniques In Determine High Resolution Building Sector Energy Consumption Profiles, Shem C. Heiple

Dissertations and Theses

A technique is presented for estimating hourly and seasonal energy consumption profiles in the building sector at spatial scales down to the individual taxlot or parcel. The method combines annual building energy simulations for cityspecific prototypical buildings and commonly available geospatial data in a Geographical Information System (GIS) framework. Hourly results can be extracted for any day and exported as a raster output at spatial scales as fine as an individual parcel (

Using Computational Fluid Dynamics Modeling To Improve The Performance Of A Solar Co2 Converter, Thomas H. Fletcher, Ralph J. Price, Reed J. Jensen

Faculty Publications

A solar collector to convert CO2 to CO at high temperature was previously developed, achieving a product with 4-6 mol % CO from pure CO2. Modeling results showed that reactions occurred in the thermal boundary layer of the heated zirconia rod at temperatures greater than 2300 K. This paper describes results of computer modeling of advanced designs meant to increase the conversion of CO from CO2. Several design modifications were tested using the model, including changing the cool-down region configuration, increasing the zirconia rod diameter, and changing the zirconia rod shape. Several operational adjustments were also modeled, including reducing the …

Heat And Mass Transport In Heat Pipe Wick Structures, Brian D. Iverson, Tyler W. Davis, Suresh V. Garimella, Mark T. North, Sukhvinder S. Kang

Faculty Publications

A novel experimental approach is developed for characterizing the performance of heat pipe wick structures. This approach simulates the actual operation of wick structures in a heat pipe. Open, partially submerged, sintered copper wicks of varying pore size are studied under the partially saturated conditions found in normal heat pipe operation. A vertical wick orientation, where the capillary lift is in opposition to gravity, is selected to test the wicks under the most demanding conditions. Mass transport measurements of the working fluid, in addition to the temperature field, are obtained for the porous wicks under the action of a discrete …

Modeling And Analysis Of The Eds Maglev System With The Halbach Magnet Array, Wonsuk Ko

Electronic Theses and Dissertations

The magnetic field analysis based on the wavelet transform is performed. The Halbach array magnetic field analysis has been studied using many methods such as magnetic scalar potential, magnetic vector potential, Fourier analysis and Finite Element Methods. But these analyses cannot identify a transient oscillation at the beginning stage of levitation. The wavelet transform is used for analyzing the transient oscillatory response of an EDS Maglev system. The proposed scheme explains the under-damped dynamics that results from the cradle's dynamic response to the irregular distribution of the magnetic field. It suggests this EDS Maglev system that responds to a vertical …

Towards A Self-Calibrating Video Camera Network For Content Analysis And Forensics, Imran Junejo

Electronic Theses and Dissertations

Due to growing security concerns, video surveillance and monitoring has received an immense attention from both federal agencies and private firms. The main concern is that a single camera, even if allowed to rotate or translate, is not sufficient to cover a large area for video surveillance. A more general solution with wide range of applications is to allow the deployed cameras to have a non-overlapping field of view (FoV) and to, if possible, allow these cameras to move freely in 3D space. This thesis addresses the issue of how cameras in such a network can be calibrated and how …

Shock-Tube Investigation Of Ignition Delay Times Of Blends Of Methane And Ethane With Oxygen, Brian Christopher Walker

Electronic Theses and Dissertations

The combustion behavior of methane and ethane is important to the study of natural gas and other alternative fuels that are comprised primarily of these two basic hydrocarbons. Understanding the transition from methane-dominated ignition kinetics to ethane-dominated kinetics for increasing levels of ethane is also of fundamental interest toward the understanding of hydrocarbon chemical kinetics. Much research has been conducted on the two fuels individually, but experimental data of the combustion of blends of methane and ethane is limited to ratios that recreate typical natural gas compositions (up to ~20% ethane molar concentration). The goal of this study was to …

Optimization Of Zonal Wavefront Estimation And Curvature Measurements, Weiyao Zou

Electronic Theses and Dissertations

Optical testing in adverse environments, ophthalmology and applications where characterization by curvature is leveraged all have a common goal: accurately estimate wavefront shape. This dissertation investigates wavefront sensing techniques as applied to optical testing based on gradient and curvature measurements. Wavefront sensing involves the ability to accurately estimate shape over any aperture geometry, which requires establishing a sampling grid and estimation scheme, quantifying estimation errors caused by measurement noise propagation, and designing an instrument with sufficient accuracy and sensitivity for the application. Starting with gradient-based wavefront sensing, a zonal least-squares wavefront estimation algorithm for any irregular pupil shape and size …

Design, Modeling, And Control Of Three-Port Converters For Solar Power Applications, Justin M. Reese

Electronic Theses and Dissertations

This paper describes the results of research into multi-port converter design and control, specifically a pair of three-port topologies based on the half-bridge and full-bridge topologies. These converters are capable of simultaneous and independent regulation of two out of their three ports, while the third port provides the power balance in the system. A dynamic model was developed for each topology to aid in testing and for designing the control loops. The models were then used to design the control structures, and the results were tested in Simulink. In addition, a basic outline of a system level architecture to control …

Effects Of Position, Orientation, And Infiltrating Material On Three Dimensional Printing Models, Joseph William Frascati

Electronic Theses and Dissertations

This research defined and evaluated mechanical properties of prototypes created using a plaster based three-dimensional printing (3DP) system commercialized by Z Corporation. 3DP is one of the fastest growing forms of rapid prototyping. Till date, there is little or no information available on material properties of infiltrants used in 3DP. This research work evaluated and documented some of the useful information for 3DP users by determining the effect of build position, build orientation and infiltration materials on the strength of prototypes. The study was performed in three different phases to limit the processing variables and to arrive at definite conclusions …

Verification Of Pilot-Scale Iron Release Models, Stephen Glatthorn

Electronic Theses and Dissertations

A model for the prediction of color release from a pilot distribution system was created in 2003 by Imran. This model allows prediction of the release of color from aged cast iron and galvanized steel pipes as a function of water quality and hydraulic residence time. Color was used as a surrogate measurement for iron, which exhibited a strong linear correlation. An anomaly of this model was an absence of a term to account for pH, due to the influent water being well stabilized. A new study was completed to evaluate the effectiveness of corrosion inhibitors against traditional adjustment. Two …

Thermodynamic Studies On The Synthesis Of Nitrides And Epitaxial Growth Of Ingan, Zinki Monga

Electronic Theses and Dissertations

Nitride semiconductor materials have been used in a variety of applications, such as LEDs, lasers, photovoltaic cells and medical applications. If incandescent bulbs could be replaced by white GaN LEDs, they would not only provide compactness and longer lifetime, but this would also result in huge energy savings. A renewed interest in InGaN emerged recently after it was discovered that the band gap for InN is 0.7eV, instead of the previously published value of 1.9eV. Thus InGaN solid solutions cover almost the whole visible spectrum, from a band gap of 3.34eV for GaN and 0.7eV for InN. Hence, InGaN can …

Quantification Of Emissions From Lawn And Garden Equipment In Central Florida, Megan Leigh Crum

Electronic Theses and Dissertations

The objective of this study was to evaluate the practical limits of EPA's NONROAD 2005 to accurately simulate Central Florida conditions, especially with regard to lawn and garden equipment. In particular we investigated a NONROAD emission inventory using default inputs and then created a locally specific emission inventory. These emission inventories were prepared for Orange, Osceola, and Seminole county and focused only on the VOC and NOx emissions caused by lawn and garden equipment. The model was manipulated to assess its ability to represent this specific category of nonroad equipment for a given airshed first by running a base case …

Advanced Coding And Modulation For Ultra-Wideband And Impulsive Noises, Libo Yang

Electronic Theses and Dissertations

The ever-growing demand for higher quality and faster multimedia content delivery over short distances in home environments drives the quest for higher data rates in wireless personal area networks (WPANs). One of the candidate IEEE 802.15.3a WPAN proposals support data rates up to 480 Mbps by using punctured convolutional codes with quadrature phase shift keying (QPSK) modulation for a multi-band orthogonal frequency-division multiplexing (MB-OFDM) system over ultra wideband (UWB) channels. In the first part of this dissertation, we combine more powerful near-Shannon-limit turbo codes with bandwidth efficient trellis coded modulation, i.e., turbo trellis coded modulation (TTCM), to further improve the …

Identification And Suitability Of A Non-Anthropomorphic Meta-Language Framework In Military Applications, Gilbert Cardona

Electronic Theses and Dissertations

Humans carry mental models concerning the behaviors, looks, and operation of products, tools, and items used in their daily lives. When these items do not fit a user's conceptual model confusion and inefficiency occur. There are four basic types of mental models based on interactive activities: 1) instructing, 2) conversing, 3) manipulating and navigating, and 4) exploring and browsing. This thesis will focus on the conversing conceptual model and its application to communications between human-agent teams to best fit a user's mental model for that communication. A non-anthropomorphic framework does not exist for use in military applications such as; target …

Learning, Detection, Representation, Indexing And Retrieval Of Multi-Agent Events In Videos, Asaad Hakeem

Electronic Theses and Dissertations

The world that we live in is a complex network of agents and their interactions which are termed as events. An instance of an event is composed of directly measurable low-level actions (which I term sub-events) having a temporal order. Also, the agents can act independently (e.g. voting) as well as collectively (e.g. scoring a touch-down in a football game) to perform an event. With the dawn of the new millennium, the low-level vision tasks such as segmentation, object classification, and tracking have become fairly robust. But a representational gap still exists between low-level measurements and high-level understanding of video …

Characterization And Flow Physics Of Plasma Synthetic Jet Actuators, Arvind Santhanakrishnan

University of Kentucky Doctoral Dissertations

Plasma synthetic jet actuators are investigated experimentally, in which the geometrical design of single dielectric barrier discharge (SDBD) plasma actuators is modified to produce zero-mass flux jets similar to those created by mechanical devices. The SDBD plasma actuator consists of two rectangular electrodes oriented asymmetrically and separated by a layer of dielectric material. Under an input of high voltage, high frequency AC or pulsed DC, a region of plasma is created in the interfacial air gap on account of electrical breakdown of the ambient air. A coupling between the electric field in the plasma and the neutral air near the …

Dynamic Voltage Scaling For Priority-Driven Scheduled Distributed Real-Time Systems, Chenxing Wang

University of Kentucky Doctoral Dissertations

Energy consumption is increasingly affecting battery life and cooling for real- time systems. Dynamic Voltage and frequency Scaling (DVS) has been shown to substantially reduce the energy consumption of uniprocessor real-time systems. It is worthwhile to extend the efficient DVS scheduling algorithms to distributed system with dependent tasks. The dissertation describes how to extend several effective uniprocessor DVS schedul- ing algorithms to distributed system with dependent task set. Task assignment and deadline assignment heuristics are proposed and compared with existing heuristics concerning energy-conserving performance. An admission test and a deadline com- putation algorithm are presented in the dissertation for dynamic …

Thermal Transient Flow Rate Sensor For High Temperature Liquid Metal Cooled Nuclear Reactor, Yingtao Jiang, Jian Ma, Rohit Reddy Saddi

Mechanical Engineering Faculty Research

In nuclear power plants and accelerator driven system (ADS) for nuclear waste treatment, it is important to monitor the coolant flow rate in the reactor core and pipe-line. In such a strong irradiation, high pressure and temperature environment, no accurate local flow measurement technique is readily available. Electromagnetic (EM) flow meter is popular in low temperature application as it is a non-intrusive technology. However, additional voltage will be produced due to temperature, flow, pressure, the chemical properties of the liquid metal and surface condition of the steel walls. In addition, the non-definite wetting behavior of liquid lead-bismuth to the electrically …

Modeling Redox-Based Magnetohydrodynamics In Three-Dimensional Microfluidic Channels, Hussameddine S. Kabbani, Aihua Wang, Xiaobing Luo, Shizhi Qian

Mechanical Engineering Faculty Research

RedOx-based magnetohydrodynamic MHD[1] flows in three-dimensional microfluidic channels are investigated theoretically with a coupled mathematical model consisting of the Nernst-Planck equations for the concentrations of ionic species, the local electroneutrality condition for the electric potential, and the Navier-Stokes equations for the flow field. A potential difference is externally applied across two planar electrodes positioned along the opposing walls of a microchannel that is filled with a dilute RedOx electrolyte solution, and a Faradaic current transmitted through the solution results. The entire device is positioned under a magnetic field which can be provided by either a permanent magnet or an electromagnet. …

Decoupling And Disturbance Rejection Control For Target Circulation, Jian Ma, Joon S. Lee, Woosoon Yim

Reactor Campaign (TRP)

In 1998, the Institute of Physics and Power Engineering (IPPE) and Experimental and Development Organization “Gidropress” in Russia, began the design and construction of a prototype lead-bismuth eutectic (LBE) accelerator target, the Target Complex 1 (TC-1), under the International Science and Technology Center (ISTC) project #559 (“Pilot Flow Lead-Bismuth Target of 1 MW Power for Accelerator Driven Systems”) in support of the international efforts to develop accelerator-driven spallation systems for nuclear transmutation and other applications.

During the thermal and engineering test of the TC-1 in 2005 at UNLV, it was observed that the existing control algorithm led to a very …

Modeling And Design Algorithms For Electromagnetic Pumps, Daniel P. Cook

Reactor Campaign (TRP)

Electromagnetic (EM) induction pumps are used in a number of nuclear energy related applications, such as circulation of molten lead-bismuth eutectic alloys in neutron targets, and circulation of liquid sodium metal in Gen IV Sodium-cooled Fast Reactors (SFR). Because EM pumps have no moving parts which can fail, they are considerably more reliable than conventional mechanical pumps for molten metal usage, and thus EM pumps are favored over mechanical pumps even though their pumping efficiency is lower and their initial cost is higher when compared to mechanical pumps of similar flow rates.

The research objectives of this task are:

• A …

Thermal Transient Flow Rate Sensor For High Temperature Liquid Metal Cooled Nuclear Reactor, Yingtao Jiang

Reactor Campaign (TRP)

In nuclear power plants and accelerator driven system (ADS) for nuclear waste treatment, it is important to monitor the coolant flow rate in the reactor core and pipe-line. In such a strong irradiation, high pressure and temperature environment, no accurate local flow measurement technique is readily available. Electromagnetic (EM) flow meter is popular in low temperature application as it is a non-intrusive technology. However, additional voltage will be produced due to temperature, flow, pressure, the chemical properties of the liquid metal and surface condition of the steel walls. In addition, the non-definite wetting behavior of liquid lead-bismuth to the electrically …

University Of Nevada, Las Vegas Transmutation Research Program Annual Report Academic Year 2006-2007, Anthony Hechanova, Rebecca Arbour

Transmutation Research Program Reports (TRP)

It is my pleasure to present the UNLV Transmutation Research Program’s sixth annual report that highlights the academic year 2006-2007. Supporting this document are the many technical reports and theses that have been generated over the past five years.

In the sixth year of our program, we continued to see growth in the Radiochemistry Ph.D. program with a total of 13 students in the third year of the program (we anticipated eight in the program proposal). Since our inception, the program has sponsored to their conclusion 42 M.S. and 4 Ph.D. degrees. The program supported 39 graduate students, 17 undergraduates, …

Combined Radiation Detection Methods For Assay Of Higher Actinides In Separation Processes, Denis Beller, Warnick Kernan

Safeguards Campaign (TRP)

The ultimate objective of this project is to develop technology to detect and accurately measure quantities of higher actinides in processing systems without taking frequent samples. These systems include used fuel receipt, separations batches, and pipelines. A variety of measurements may be combined to calculate flow rates of actinide elements with a to-be-determined precision. Nuclear and decay characteristics of materials during processing will be acquired, conceptual designs of monitoring systems will be developed, radiation transport studies will be conducted to develop an understanding of operational regimes, and experiments will be performed to confirm performance. Radiation transport and scoping studies will …

Use Of Positron Annihilation Spectroscopy For Stress-Strain Measurements, Ajit K. Roy

Transmutation Sciences Materials (TRP)

During the past academic year, this project was focused on the characterization of residual stress in welded specimens consisting of austenitic and martensitic stainless steels using an activation technique based on the Positron Annihilation Spectroscopic (PAS) method. The extent of residual stress was expressed in terms of three line-shape parameters (S-, W- and T-). Further, efforts were made to characterize linear lattice defects such as dislocations in the vicinity of Fusion-Line (FL), Heat-Affected- Zone (HAZ), and the base material of the welded specimens using Transmission Electron Microscopy (TEM). The metallurgical microstructures at these three regions have also been evaluated by …

Fundamental And Applied Experimental Investigations Of Corrosion Of Steel By Lbe Under Controlled Conditions: Kinetics, Chemistry Morphology, And Surface Preparation, John Farley, Allen L. Johnson, Dale L. Perry

Transmutation Sciences Materials (TRP)

Advanced nuclear processes and facilities (e.g., transmutation of nuclear waste, fast reactors, and spallation neutron sources) impose special demands on materials, which must withstand high temperatures, high radiation fields, and chemical corrosion. Proposed schemes for transmuting nuclear waste require a nonmoderating coolant such as lead-bismuth eutectic (LBE). While LBE corrodes most steels, small amounts of oxygen in the LBE greatly reduces the corrosion rate, and could ideally re-grow a damaged oxide layer in-situ. The protective oxide layer would thus be self-healing. However, the fundamental understanding of the role of oxygen and passivating oxide layers is presently incomplete.

During the present …