Engineering Commons^™

Positive Model Temperature And Its Effect On Stiffness And Percent Crystallinity Of Polypropylene, Mark Geil

Faculty Articles

No abstract provided.

Selected Lid Projects In New England, New England Environmental Finance Center

Planning

Examples of low impact development (LID) projects in each state in New England.

A Framework For The Introduction Of Organisational Learning Using Web 2.0 Applications, Joseph M. Reynolds

Dissertations

We are now becoming more and more dependent on web technologies in our personal lives for our communication, information and entertainment needs. But what about using these skills and technologies for our business lives, could they transform the business world in the same way they have transformed our personal world? The purpose of this research was to investigate whether the latest web applications could be successfully implemented into an organisation who wished to transform itself into a modern and flexible organisation. This research was primarily focused on introducing organisational learning into the business through the use of new technology and …

Stream Ambient Noise, Spectrum And Propagation Of Sounds In The Goby Padogobius Martensii: Sound Pressure And Particle Velocity, Marco Lugli, Michael L. Fine

Biology Publications

The most sensitive hearing and peak frequencies of courtship calls of the stream goby, Padogobius martensii, fall within a quiet window at around 100Hz in the ambient noise spectrum. Acoustic pressure was previously measured although Padogobius likely responds to particle motion. In this study a combination pressure (p) and particle velocity (u) detector was utilized to describe ambient noise of the habitat, the characteristics of the goby’s sounds and their attenuation with distance. The ambient noise (AN) spectrum is generally similar for p and u (including the quiet window at noisy locations), although the energy distribution of uspectrum is …

2006 Survey Results For Cs1310: Introduction To Programming Using Media Computation, Aida Gandara

Departmental Technical Reports (CS)

In Spring of 2006, the Computer Science Department at the The University of Texas at El Paso began an initiative to offer a course named CS 1310 Introduction to Computing, focused on media computation. The course was directed toward Liberal Arts or non-CS students with the main goal of exposing these students to fundamental concepts of computer science using a highly abstract language called Python. The course was structured similar to that of the CS 1315 Introduction to Media Computation course offered at Georgia Institute of Technology, designed by Associate Professor, Mark Guzdial.

The remainder of this document serves to …

Automated Random Testing To Detect Specification-Code Inconsistencies, Yoonsik Cheon

Departmental Technical Reports (CS)

An interface specification language such as JML provides a means to document precisely the behavior of program modules such as Java classes, and it is being adopted by industry. However, few practical tools exist for programmers to assure the correctness of their interface specifications. Nonetheless, the correctness of an interface specification is a prerequisite for the use of the specification, both as a precise API documentation and as a foundation for formal verification of and reasoning about the implementation. We propose automated random testing as a practical tool to assure the correctness of interface specifications. The key idea of our …

Towards Adding Probabilities And Correlations To Interval Computations, Daniel Berleant, Martine Ceberio, Gang Xiang, Vladik Kreinovich

Departmental Technical Reports (CS)

The paper is a continuation of our previous work towards the use of probability information in interval computations. While in the previous work, bounds on the first order moments are taken into account, the contribution of this article is to deal with correlations. Specifically, in this paper, we develop a new method that takes into account both correlation among measured parameters and bounds on their expected values when doing interval computation.

Enterprise Resource Planning (Erp): A Review Of The Literature, Young Moon

Mechanical and Aerospace Engineering - All Scholarship

This article is a review of work published in various journals on the topics of Enterprise Resource Planning (ERP) between January 2000 and May 2006. A total of 313 articles from 79 journals are reviewed. The article intends to serve three goals. First, it will be useful to researchers who are interested in understanding what kinds of questions have been addressed in the area of ERP. Second, the article will be a useful resource for searching for research topics. Third, it will serve as a comprehensive bibliography of the articles published during the period. The literature is analysed under six …

Implementation Of A Mems Laboratory Course With Modular, Multidisciplinary Team Projects, S J. Lee, S Gleixner, T R. Hsu, David W. Parent

Faculty Publications

No abstract provided.

Nebraska Summary: S647 Agco Rt155a, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Analysis And Kinetics Of The Sequencing Batch Reactors, Udeme J. Ndon

Faculty Publications

Fundamental analysis and kinetics of treatment reactors are major topics in environmental engineering literature. These fundamental topics in reactor processes are well known for the ideal batch reactor, the continuous stirred tank reactor, and the plug flow reactor. The sequencing batch reactors (SBRs) are relatively new in the field, but are widely used. Despite the wide application of sequencing batch reactors in the field, information is lacking on the fundamental analysis and kinetics, especially with comparison to the ideal batch reactor. This report presents analysis and kinetics of the sequencing batch reactors and compares the kinetics equations developed with those …

Biomechanics Of The Rabbit Knee And Ankle: Muscle, Ligament, And Joint Contact Force Predictions, Dustin M. Grover, Andrew A. Chen, Scott J. Hazelwood

Biomedical Engineering

Mathematical models of small animals that predict in vivo forces acting on the lower extremities are critical for studies of musculoskeletal biomechanics and diseases. Rabbits are advantageous in this regard because they remodel their cortical bone similar to humans. Here, we enhance a recent mathematical model of the rabbit knee joint to include the loading behavior of individual muscles, ligaments, and joint contact at the knee and ankle during the stance phase of hopping. Geometric data from the hindlimbs of three adult New Zealand white rabbits, combined with previously reported intersegmental forces and moments, were used as inputs to the …

Volume Effects On Fatigue Life Of Equine Cortical Bone, R. F. Bigley, J. C. Gibeling, S. M. Stover, S. J. Hazelwood, D. P. Fyhrie, R. B. Martin

Biomedical Engineering

Materials, including bone, often fail due to loading in the presence of critical flaws. The relative amount, location, and interaction of these flaws within a stressed volume of material play a role in determining the failure properties of the structure. As materials are generally imperfect, larger volumes of material have higher probabilities of containing a flaw of critical size than do smaller volumes. Thus, larger volumes tend to fail at fewer cycles compared with smaller volumes when fatigue loaded to similar stress levels. A material is said to exhibit a volume effect if its failure properties are dependent on the …

Digitally Controlled Synchronous Buck Converter, Taufik, M. Starman, M. Anwari

Electrical Engineering

The demand for high performance, more flexible and reconfigurable dc-dc converters has pushed dc-dc converter designers to seek for alternative ways to control the pulse-width modulated switch inside the dc-dc converter. During the past few years, efforts have been put forward both by academics and power semiconductor industries to phase out the most commonly used analog PWM controllers with digital controller with its associated software. This paper presents an experimental result of designing and building a 5W synchronous buck converter that employs a microcontroller to process the output voltage signal and translate it into PWM signal to control the switches …

Web-Based Library For Student Projects/Theses And Faculty Research Papers, Rudy Senjaya

Theses Digitization Project

The purpose of this project is to make available a Web-based Library, a web application developed for the Department of Computer Science at CSUSB to manage student projects/theses and faculty papers. The project is designed in accordance with Model-View-Controller (MVC) design pattern using the Jakarta Struts framework and iBATIS Data Mapper framework from Apache Software Foundation, JavaServer Pages (JSP), and MySQL database.

Final Report: Production Of Biodiesel From Algae Applied To Agricultural Wastewater Treatment, Yarrow M. Nelson, Adam Feffer, Andrew Kean, Tryg Lundquist, Walter Mark, Linda Vanasupa, Sam Vigil, Ian Woertz

Civil and Environmental Engineering

No abstract provided.

Multiple-Model Framework For Assessment Of Real-Time Crash Risk, Anurag Pande

Civil and Environmental Engineering

This study is based on real-time models of risk assessment for rear-end and lane-change-related crashes on freeways. These models were developed in recent studies on the basis of historical crash data and corresponding traffic data collected through underground loop detectors on Interstate-4 in Orlando, Florida. In this study the potential of these models was explored for identification of crashes that were not part of the database used to develop the models. These crashes include single-vehicle crashes that might result from evasive actions taken by drivers to avoid vehicles in front (i.e., a rear-end crash) or in a neighboring lane (i.e., …

Backward And Forward Compatibility, Jianbiao Pan, Jasbir Bath, Xiang Zhou, Dennis Willie

Industrial and Manufacturing Engineering

In response to the European Union (EU) Restriction of Hazardous Substances (RoHS) and other countries’ impending lead-free directives, the electronics industry is moving toward lead-free soldering. Total lead-free soldering requires not only lead-free solder paste but also lead-free printed circuit board (PCB) finish and lead-free component/packages. Transitioning tin-lead (SnPb) soldering to totally lead-free soldering is a complex issue and involves movement of the whole electronics industry supply chain. In reality, there is a transition period.

Integrating Project-Based Learning Throughout The Undergraduate Engineering Curriculum, Richard N. Savage, Katherine C. Chen, Linda Vanasupa

Materials Engineering

Equipping engineering students with the skills and knowledge required to be successful global engineers in the 21st century is one of the primary objectives of undergraduate educators. Enabling students to practice self-directed learning, to find solutions to design problems that are sustainable and to recognize that they are part of a global community are just of few of our educational goals. Self-directed learning can define an individual’s ability to practice life-long learning. It places the responsibility on the individual to initiate and direct the learning process and can enable an individual to adapt to change. Project-based learning provides the contextual …

2006/07 Research And Development, College Of Engineering And Applied Sciences

Electrical and Computer Engineering Newsletter

• Swarm Behavior
• Expanding Your Horizons @ WMU Engineering
• Design of a Reconfigurable Digital Architecture for Fuzzy Automata
• Rehabilitation Engineering
• Integrated Smart Wireless SAW Sensors and Systems
• Early Detection of Prostate Cancer
• Michigan Space Grant Consortium (MSGC) conference provides research opportunities to WMU students

Benjamin In Paris: Weak Messianism And Memories Of The Oppressed, Jules Simon

Selected Works Temporary Series

No abstract provided.

Improvement To The Data Logging Capability Of A Cough Monitoring System, Matthew Barlow

Inquiry: The University of Arkansas Undergraduate Research Journal

Data logging capability of a previously developed self contained cough recorder using an accelerometer as the sensing element is improved by using a secure digital memory card for later retrieval on a computer. Firmware is developed to enhance the functionality of the cough recorder. Existing libraries are modified for increased write rates. Increased writing speed allows 8-bit sampling at rates exceeding 8kHz, allowing for detailed time and frequency domain analysis. Additional features have also been developed to enable easy management of recordings, such as a file system compatibility with Microsoft Windows., and unique file names for each recording.

Remediation Of Rdx- And Hmx-Contaminated Groundwater Using Organic Mulch Permeable Reactive Barriers, Farrukh Ahmad, Stephen P. Schnitker, Charles J. Newell

United States Army: Publications

Organic mulch is a complex organic material that is typically populated with its own consortium of microorganisms. The organisms in mulch breakdown complex organics to soluble carbon, which can then be used by these and other microorganisms as an electron donor for treating RDX and HMX via reductive pathways. A bench-scale treatability study with organic mulch was conducted for the treatment of RDX- and HMX-contaminated groundwater obtained from a plume at the Pueblo Chemical Depot (PCD) in Pueblo, Colorado. The site-specific cleanup criteria of 0.55 ppb RDX and 602 ppb HMX were used as the logical goals of the study. …

Key Signature Estimation, Matt Cranitch, Derry Fitzgerald, Matthew Hart

Conference papers

The problem of automatic key signature detection has been the focus of much research in recent years. Previous methods of key estimation have focused on chromagrams and key profiling techniques. This paper presents a remarkably simple but effective method of estimating key signature from musical recordings. The algorithm introduces the "keyogram", a concept resembling the chromagram, and is aimed for use on traditional Irish music. The keyogram is a measure of the likelihood of each possible major key signature based on a masked scoring system.

Automating Ornamentation Transcription, Mikel Gainza, Eugene Coyle

Conference papers

A novel technique for detecting single and multi-note ornaments is presented. The system detects audio segments by utilising and onset detector based on comb filters (ODCF), which is capable of detecting very close events. In addition, a novel method to remove spurious onsets due to offset events is introduced. The system utilises musical ornamentation theory to decide whether a sequence of audio segments correspond to an ornamentation musical structure. In order to evaluate the results, a database of signals produced by different players using the three different instruments has been utilised. The results represent a step forward towards fully automating …

Automatic Bar Line Segmentation, Mikel Gainza, Dan Barry, Eugene Coyle

Conference papers

A method that segments the audio according to the position of the bar lines is presented. The method detects musical bars that frequently repeat in different parts of a musical piece by using an audio similarity matrix. The position of each bar line is predicted by using prior information about the position of previous bar lines as well as the estimated bar length. The bar line segmentation method does not depend on the presence of percussive instruments to calculate the bar length. In addition, the alignment of the bars allows moderate tempo deviations.

Recruitment And Retention: The Role Of The Public Image Of Engineering, Eddie Conlon

Conference papers

This paper presents findings of three surveys conducted with first year students in the Faculty of Engineering in the Dublin Institute of Technology. It focuses on their motivation for studying engineering and the people who influenced the decision to do engineering. It shows there are gaps in the students’ knowledge of their programmes and also between their expectations and their experience of their course. Some proposed areas of action are identified to increase both recruitment and retention. It is argued that projecting an image of engineering as a creative activity would help in addressing recruitment and retention issues.

Electromagnetic Coupling Mechanism In A Layered Human Tissue Model As Reference For 434 Mhz Medical Therapy Applicators, Sergio Curto, Max Ammann

Conference papers

In order to minimize exposure to human tissue, electromagnetic interaction with antennas has benefited from a lot of research since hand-held communication transceivers became widely used consumer products. On the other hand, medical applications have been exploiting the ISM (industrial scientific and medical standard) 434 MHz frequency band for therapeutic applications such as hyperthermia. Various antennas have been used in hyperthermia applicators but advanced designs depend on improved knowledge of the radiated antenna modes and interacting influence of human tissue. As a preliminary step towards analyzing antennas interacting with tissues in the near- and far-fields, this study reports on the …

Spline Based Geometry For Printed Uwb Antenna Design, Matthias John, Max Ammann

Conference papers

This paper presents a geometry for ultra-wideband (UWB) antennas which is based on quadratic Bezier spline curves. A genetic algorithm (GA) is used to optimise the geometry. The search space for the GA is minimised in order to improve the performance and computational efficiency of the algorithm. The optimised antenna covers the entire UWB bandwidth.

Making Olsr Aware Of Resources, Karol Kowalik, Brian Keegan, Mark Davis

Conference papers

An important element of any routing protocol used for Wireless Mesh Networks (WMNs) is the link cost function used to represent the radio link characteristic. The majority of the routing protocols for WMNs attempt to accurately characterise the radio link quality by constructing the link cost function from the measurements obtained using active probing techniques which introduces overhead. In this paper we present a modified version of the Optimized Link State Routing (OLSR) protocol which uses the link cost function values provided the Resource Aware Routing for mEsh (RARE) module which employs passive monitoring to gather radio link information. This …