Engineering Commons^™

Load Transfer Issues In The Tensile And Compressive Behavior Of Multiwall Carbon Nanotubes, G. A. Shen, S. Namilae, Namas Chandra

Department of Mechanical and Materials Engineering: Faculty Publications

Carbon nanotubes (CNT) are considered to be ultra strong and stiff reinforcements for structural composite applications. The load transfer between the inner and outer nanotubes in multiwall carbon nanotubes (MWCNT) has to be clearly understood to realize their potential in not only composites, but also other applications such as nano-springs and nano-bearings. In this paper, we study the load transfer between the walls of multiwall nanotubes both in tension and compression using molecular dynamics simulations. It is found that very minimal load is transferred to the inner nanotube during tension. The load transfer in compression of capped nanotubes is much …

Inelastic Deformation Behavior Of La0.6sr0.4feo3 Perovskite, Nina Orlovskaya, Harlan U. Anderson, Mykola Brodnikovskyy, Mykola Lugovy, Michael John Reece

Materials Science and Engineering Faculty Research & Creative Works

Inelastic deformation behavior of the rhombohedral La_0.6Sr_0.4FeO₃ perovskite is reported. Such behavior is very similar to the ferroelastic deformation of LaCoO₃ or lead zirconate titanate perovskites, except that no twin structure was found to exist in La_0.6Sr_0.4FeO₃. the possible mechanisms responsible for such nonlinear deformation behavior are discussed. © 2006 American Institute of Physics.

Crop Production For Advanced Life Support Systems, R M. Wheeler, J C. Sager

Technical Reports

The use of plants for bioregenerative life support for space missions was first studied by the US Air Force in the 1950s and 1960s. Extensive testing was also conducted from the 1960s through the 1980s by Russian researchers located at the Institute of Biophysics in Krasnoyarsk, Siberia, and the Institute for Biomedical Problems in Moscow. NASA initiated bioregenerative research in the 1960s (e.g., Hydrogenomonas) but this research did not include testing with plants until about 1980, with the start of the Controlled Ecological Life Support System (CELSS) Program. The NASA CELSS research was carried out at universities, private corporations, and …

Photovoltaic Use In A Disaster: Mitigation Verses Response, Florida Solar Energy Center, William Young

FSEC Energy Research Center®

Natural disasters can happen at any time destroying lives, homes, businesses and the natural environment. In their path they leave many people without medical services, potable water, electrical services and communication for long periods of time. A disaster can be a minor or major incident impacting the people that survive its effect. We all become aware of the destruction caused by major hurricanes such as Katrina leaving several hundred-thousand people homeless and the resources needed to respond to save lives and restore property. In the midst of these extraordinary complications, emergency management teams, medical personnel, the military, and countless public …

Methane Conversion In Pulsed Corona Discharge Reactors, Morris D. Argyle, Gui-Bing Zhao, Sanil John, Ji-Jun Zhang, Linna Wang, Suresh S. Muknahallipatna, Jerry C. Hamann, John F. Ackerman, Ovid A. Plumb

Faculty Publications

This work reports the effect of capacitance, cathode material, gas flow rate and specific energy input on methane conversion, energy efficiency and product selectivity in a co-axial cylinder pulsed corona discharge reactor. Ethan and acetylene appear to be formed from dimerization of CH3 radicals and CH radicals, respectively, while ethylene is formed mainly from the dehydrogenation of ethane. At a given power input, low capacitance with high pulse frequency results in higher methane conversion and energy efficiency than operation at high capacitance with low pulse frequency. Platinum coated stainless steel cathodes slightly enhance methane conversion relative to stainless steel cathodes, …

End Splice Assembly For Box-Beam Guardrail And Terminal Systemis, John D. Reid, John R. Rohde, Dean L. Sicking, King K. Mak

Department of Mechanical and Materials Engineering: Faculty Publications

An end splice assembly for a box-beam guardrail and terminal system having a first stage rail element and a second stage rail element. The assembly has two major connecting components. Upper and lower bent plate channels and upper and lower channel splice plates. The channels and plates have side walls which extend laterally to one another when the two rail elements are mated. The channels and plates are fastened together to provide moment strength to the splice within the system.

Particle Separation/Purification System, Diffuser And Related Methods, John M. Stencel, Tapiwa Zabron Gurupira

Center for Applied Energy Research Faculty Patents

A separator for intended use in separating particles having a selected charge from a particle mixture entrained in or carried by a fluid flow is disclosed. The separator comprises a tubular, elongated body for receiving the fluid flow. At least one and preferably a pair of electrodes may be provided to create an electric field in at least a portion of the body through which the fluid flow passes, and at least one partition defines first and second channels for receiving the flow downstream of the portion of the body including the electric field. In one embodiment, the electrode is …

Ifc To Contram Translator, Florida Solar Energy Center, Mangesh Basarkar

FSEC Energy Research Center®

Building security issues are of serious concern in the industry today. This paper will describe the design, development and testing of a software tool that can be effectively used to translate three dimensional building data sets of geometry, materials and HVAC components into an input file for the airflow and contaminant concentration simulation program CONTAM. The objective of the exercise is to allow for shorter turnaround time in evaluating IAQ strategies and building security related issues.

The software tool, 'fsIFCCTM', has been successfully tested to translate 3-D building elements like spaces, walls, doors, windows, and HVAC components like ducts, duct …

Pre- And Post-Alpha Motoneuronal Control Of The Soleus H-Reflex During Sinusoidal Hip Movements In Human Spinal Cord Injury, Maria Knikou, Debjani Chaudhuri, Elizabeth Kay, Brian D. Schmit

Biomedical Engineering Faculty Research and Publications

The aim of this study was to establish the contribution of hip-mediated sensory feedback to spinal interneuronal circuits during dynamic conditions in people with incomplete spinal cord injury (SCI). Specifically, we investigated the effects of synergistic and antagonistic group I afferents on the soleus H-reflex during imposed sinusoidal hip movements. The soleus H-reflex was conditioned by stimulating the common peroneal nerve (CPN) at short (2, 3, and 4 ms) and long (80, 100, and 120 ms) conditioning test (C-T) intervals to assess the reciprocal and pre-synaptic inhibition of the soleus H-reflex, respectively. The soleus H-reflex was also conditioned by medial …

Improved Specifications For Federally Procured Ruggedized Manufactured Homes For Disaster Relief In Hot/Humid Climates, Florida Solar Energy Center, Stephanie Thomas-Rees

FSEC Energy Research Center®

The Federal Emergency Management Agency (FEMA) uses ruggedized manufactured homes to provide short term housing solutions during the repair and rebuilding phase after a natural disaster.

Federally procured manufactured homes are currently constructed in accordance with the Housing and Urban Development's (HUD) manufactured housing standards and typically built to the minimum code requirements. These homes can consume more energy than their site built comparatives and use materials and mechanical systems that can potentially contribute to poor indoor quality and low durability. Two improved specifications are presented in this report to enhance energy efficiency, sustainability, indoor air quality and provide back …

Transgenic Fibrinogen, William H. Velander

Department of Chemical and Biomolecular Engineering: Patents

A transgenic, non-human mammalian animal is capable of expressing a heterologous gene for human or other recombinant physiologically functional fibrinogen holoprotein or individual subunit chain polypeptides thereof or a modified or fusion fibrinogen in mammary glands of the animals and secreting the expressed product into a body fluid. Methodology employing such a mammal yields recombinant physiologically functional fibrinogens, subunit chain polypeptides thereof, and modified or fusion fibrinogens.

Adaptive Control Of Micro Air Vehicles, Joshua Stephen Matthews

Theses and Dissertations

Although PID controllers work well on Miniature Air Vehicles (MAVs), they require tuning for each MAV. Also, they quickly lose performance in the presence of actuator failures or changes in the MAV dynamics. Adaptive control algorithms that self tune to each MAV and compensate for changes in the MAV during flight are explored. However, because the autopilots on MAVs are small, many of the adaptive control algorithms like those that employ least squares estimation may take too much code space, memory, and/or computing power. In this thesis we develop several Lyapunov-based model reference adaptive control (MRAC) schemes that are both …

Improved State Estimation For Miniature Air Vehicles, Andrew Mark Eldredge

Theses and Dissertations

Research in Unmanned Air Vehicles (UAV's) continues to push the limitations of size and weight. As technical advances have made UAV's smaller and less expensive, they have become more flexible and extensive in their roles. To continue using smaller and less expensive components while retaining and even enhancing performance requires more sophisticated processing of sensor data in order for the UAV to accurately determine its state and thereby allow the use of feedback in controlling the aircraft automatically. This work presents a three-stage state-estimation scheme for the class of UAV's know as Miniature Air Vehicles (MAV's). The first stage estimates …

High Temperature Heat Exchanger Project: Quarterly Progress Report April 1, 2006 Through June 30, 2006, Anthony Hechanova

Publications (NSTD)

Numerical Analyses of the Ceramatec Sulfuric Acid Decomposer. Comparisons with experiments for the Ceramatec sulfuric acid decomposer coupon with eight straight channels for four different geometries and four different flow rates were performed. All of the operation and boundary conditions for the calculations were the same as in the Ceramatec experiments. Good agreement was found. The overall pressure drop difference between calculations and experiments for most of the cases is within 10%.

Ccfss Technical Bulletin Fall 2006, Wei-Wen Yu Center For Cold-Formed Steel Structures

CCFSS Technical Bulletins (1993 - 2020)

No abstract provided.

Mansfield Ct: Planning A New Village Center, Maggie Jones, Richard Barringer

Planning

The case follows the development of a plan for a new village center in Storrs, the central village of Mansfield, Connecticut. A process that was transparent and inclusive of the community members yielded a plan that gained the approval of the Town, the landowner (the University of Connecticut), and the citizenry. The process relied on the mending of fences, the leadership of key participants, and an innovative strategy that included development of a nonprofit corporation and creative use of grant money. While zoning changes are still in the works, the first stage of building goes forward.

South Kingstown Ri: New Zoning For An Historic Mill, Maggie Jones, Richard Barringer

Planning

The village of Peace Dale in the town of South Kingstown, Rhode Island, developed around several mills that commenced operations in the 1800s. One mill, known as the Palisades, is still partially active and in excellent condition, but much of its square footage is unutilized. A citizens’ group of artists and business people joined with the mill owners and the town of South Kingstown to develop new zoning regulations to make more flexible the permitted uses for the mill site. The proposed zoning will allow the mill complex to feature a mix of retail, residential, and manufacturing uses, while preserving …

Augusta Me: The New Bridge Begets A New Planned Neighborhood, Molly Pulsifer, Richard Barringer

Planning

Construction of a new Third Bridge over the Kennebec River in Augusta offered the prospect of a new and handsome gateway to the city. Further, the resulting change in traffic patterns offered the City the chance to plan for a pattern of development quite different from what the city had experienced for the past half-century. The case study describes the planning and construction of the new bridge and corridors that re-routed traffic out of Augusta’s downtown and older neighborhoods, and created the opportunity for planned development adjacent to the corridor created by the new bridge. It goes on to describe …

Investigation Of Negative Refractive Index In Reciprocal Chiral Materials, Monish Ranjan Chatterjee, Partha P. Banerjee, Pradeep R. Anugula

Electrical and Computer Engineering Faculty Publications

It is well known that there exist both natural materials (such as milk or sugar solution) possessing chiral (or handed) properties, as well as an increasing list of man-made materials (such as sodium bromate) that exhibit chirality. One of the principal properties of chirality is that light of any arbitrary polarization, when propagating through a chiral material, splits up into two circular polarizations propagating in different directions. In the past decade or longer, researchers have investigated electromagnetic transverse (plane) wave propagation across a non-chiral/chiral interface, and determined the electromagnetic Fresnel coefficients for such propagation. Traditionally, such coefficients are derived under …

Modeling Liquid-Crystal Devices With The Three-Dimensional Full-Vector Beam Propagation Method, Qian Wang, Gerald Farrell, Yuliya Semenova

Articles

Simulation of light propagation within nematic liquid-crystal (LC) devices is considered, of which the director is aligned normal to the z axis. A three-dimensional full-vector finite-difference beam propagation method for an anisotropic medium is presented and an alternating direction implicit scheme is adopted. Simulations of light propagation in a bulk polarization converter, a waveguide with a LC covering layer, and an integrated polarization splitter and optical switch are presented. Comparison with an existing simulation method is carried out for beam behavior within the bulk polarization converter. The effect of strong surface anchoring of a LC cell on the beam behaviors …

How Much Energy Are We Using? Potential Of Residential Energy Demand Feedback Devices, Florida Solar Energy Center, Danny Parker

FSEC Energy Research Center®

Past studies of providing instantaneous feedback on household electrical demand show promise to reduce energy consumption by 10-15%. This paper surveys past research and describes a pilot evaluation of two low cost monitoring systems in case study homes. We also develop an evaluation protocol to use such devices to determine the relative energy intensity of various energy end uses. An identified advantage of the technology is that it provides better guidance on profitable areas to reduce household electrical demand-many of which are often unexpected. Moreover, our case studies showed that use of targeted power strips and occupancy-based controls can significantly …

Canica: An Ide For The Java Modeling Language, Angelica B. Perez, Yoonsik Cheon, Ann Q. Gates

Departmental Technical Reports (CS)

Canica is an integrated development environment for the Java Modeling Language (JML), a formal behavioral interface specification language for Java. The JML distribution includes several support tools, such as a syntax checker, a compiler, and a document generator, and there are several third-party tools available for JML. However, most of these tools are command-line-based and work in isolation. Canica glues and streamlines these tools to provide a GUI-based, integrated environment for JML; for example, it automates unit testing completely from test data generation to test execution and test result determination. In this paper, we describe the key features of Canica …

A Model-Based Workflow Approach For Scientific Applications, Leonardo Salayandia, Paulo Pinheiro Da Silva, Ann Q. Gates, Alvaro Rebellon

Departmental Technical Reports (CS)

Productive design of scientific workflows often depends on the effectiveness of the communication between the discipline domain experts and computer scientists, including their ability to share their specific needs in the design of the workflow. Discipline domain experts and computer scientists, however, tend to have distinct needs for designing workflows including terminology, level of abstraction, workflow aspects that should be included in the design. This paper discusses the use of a Model-Based Workflow (MBW) approach as an abstract way to specify workflows that conciliate the needs of domain and computer scientists. Within the context of GEON, an NSF cyberinfrastructure for …

Department Of Biological Systems Engineering Newsletter, Issue 1, August 2006

BSE Department Magazine

Contents:
Welcome Comments from Department Head
Student Poster Exhibition
Quarter-scale Tractor Team
Distinguished Fellowship Awards
Scoops and Scholars
Educational Objectives
ASABE Honors Department Faculty and Staff Members
Computer Tool Helps Crop Production under Limited Irrigation
Comings and Goings
Milestones
Faculty and Staff News
Alumni Update
Alumni Profile
Graduation
UCare Spring 2006 Undergraduate Research
MSYM Student on Winning Team
A Nebraskan Goes Way South
Visitors to BSE

Cpt-Based Probabilistic And Deterministic Assessment Of In Situ Seismic Soil Liquefaction Potential, Robb E.S. Moss, Raymond B. Seed, Robert E. Kayen, Jonathan P. Stewart, Armen Der Kiureghian, K. Onder Cetin

Civil and Environmental Engineering

This paper presents a complete methodology for both probabilistic and deterministic assessment of seismic soil liquefaction triggering potential based on the cone penetration test (CPT). A comprehensive worldwide set of CPT-based liquefaction field case histories were compiled and back analyzed, and the data then used to develop probabilistic triggering correlations. Issues investigated in this study include improved normalization of CPT resistance measurements for the influence of effective overburden stress, and adjustment to CPT tip resistance for the potential influence of "thin" liquefiable layers. The effects of soil type and soil character (i.e., "fines" adjustment) for the new correlations are based …

Structural Matching Via Optimal Basis Graphs, Fred W. Depiero

Electrical Engineering

The ‘basis graph’ approach to structural matching uses a fixed set of small (4 node) graphs to characterize local structure. We compute mapping probabilities by first finding the probability of a basis graph being an induced subgraph of the input graph. The similarity of these probabilities is used to compare nodes of the input graphs. The method permits common subgraphs to be identified without the use of any node or edge coloring. We report on an improved, simpler, version of the algorithm, which has also been optimized. Performance is compared with the LeRP method, which is based on length-r paths. …

Stochastic Adaptive Control Model For Traffic Signal Systems, Xiao-Hua Yu, W. W. Recker

Electrical Engineering

An adaptive control model of a network of signalized intersections is proposed based on a discrete-time, stationary, Markov decision process. The model incorporates probabilistic forecasts of individual vehicle actuations at downstream inductance loop detectors that are derived from a macroscopic link transfer function. The model is tested both on a typical isolated traffic intersection and a simple network comprised of five four-legged signalized intersections, and compared to full-actuated control. Analyses of simulation results using this approach show significant improvement over traditional full-actuated control, especially for the case of high volume, but not saturated, traffic demand.

Automatic Biasing Of A Power Device For Linear Operation, Vladimir I. Prodanov

Electrical Engineering

A power device(s) is biased and operates in Class-AB. Crossover distortion is minimized over a broad range of operating conditions, not only for a nominal case. The bias current of a power transistor is automatically adjusted in response to process and temperature variations. Preferably, the adjustment is performed using an error-feedback arrangement. An exemplary ‘rule’ for bias adjustment involves satisfying a proportionality relationship between the small-signal device transconductance at the operating point, and a maximum device transconductance. A dual replica master-slave control architecture is utilized. A self-adapting circuit is provided to change the bias current (or voltage) so that the …

Applying Lean Manufacturing Techniques To Improve The Performance Of An Emergency Department, Ramesh Pondhe

All-Inclusive List of Electronic Theses and Dissertations

The research was an attempt to apply lean manufacturing (LM) techniques, to the healthcare setting specifically to Emergency Department (ED) of a local hospital and to improve its performance. An ED is meant to attend/provide immediate care to a patient who needs medical care immediately and also balancing the care to patients with lesser acuity who arrive at the ED for treatment. The data was collected from the ED by direct observation. The data was statistically analyzed to find out the bottlenecks in the process during the course of a patient's treatment to further provide solutions and improve the performance …

Workflow-Driven Ontologies: An Earth Sciences Case Study, Leonardo Salayandia, Paulo Pinheiro Da Silva, Ann Q. Gates, Flor Salcedo

Departmental Technical Reports (CS)

A goal of the Geosciences Network (GEON) is to develop cyber-infrastructure that will allow earth scientists to discover access, integrate and disseminate knowledge in distributed environments such as the Web, changing the way in which research is conducted. The earth sciences community has begun the complex task of creating ontologies to support this effort. A challenge is to coalesce the needs of the earth scientists, who wish to capture knowledge in a particular discipline through the ontology, with the need to leverage the knowledge to support technology that will facilitate computation, for example, by helping the composition of services. This …