Engineering Commons^™

Preparation Of Efficient Cuin1-Xgaxse2-Ysy/Cds Thin-Film Solar Cells By Optimizing The Molybdenum Back Contact And Using Diethylselenide As Selenium Precursor, Ankur Kadam

Electronic Theses and Dissertations

High efficiency CuIn1-xGaxSe2-ySy (CIGSS)/CdS thin-film solar cells were prepared by optimizing the Mo back contact layer and optimizing the parameters for preparing CIGSS absorber layer using diethylselenide as selenium source. The Mo film was sputter deposited on 2.5 cm x 10 cm soda-lime glass using DC magnetron sputtering for studying the adhesion and chemical reactivity with selenium and sulfur containing gas at maximum film growth temperature. Mo being a refractory material develops stresses, nature of which depends on the deposition power and argon pressure. It was found that the deposition sequence with two tensile stressed layers deposited at 200W and …

Synthesis Of High-Temperature Stable Anatase Tio2 Photocatalyst, Suresh Pillai, Declan Mccormack, Michael Seery, Pradeepan Periyat, Steven Hinder, John Colreavy, Reenamol George, Hugh Hayden

Articles

In the absence of a dopant or precursor odification, anatase to rutile transformation in synthetic TiO2 sually ccurs at a temperature of 600 700 °C. Conventionally, metal oxide dopants (e.g., Al2O3 nd SiO2 are used o tune the anatase to rutile transformation. A simple methodology is reported here to extend the anatase utile transformation by employing various concentrations of urea. XRD and Raman spectroscopy were used uring thermal treatment. A significantly higher anatase phase (97%) as been obtained at 800 C with use of a 1:1 Ti(OPr)4 urea composition and 11% anatase composition is etained even after calcining …

Digital Signal Processing (Second Edition), Jonathan Blackledge

Books/Book chapters

This book provides an account of the mathematical background, computational methods and software engineering associated with digital signal processing. The aim has been to provide the reader with the mathematical methods required for signal analysis which are then used to develop models and algorithms for processing digital signals and finally to encourage the reader to design software solutions for Digital Signal Processing (DSP). In this way, the reader is invited to develop a small DSP library that can then be expanded further with a focus on his/her research interests and applications.

There are of course many excellent books and software …

Centralisation/Decentralisation In European Universities: Case Study Dit., Mike Murphy

Presentations

No abstract provided.

Nanoparticles For Enhanced Delivery Of Chemotherapeutics, Emily J. Bahram-Ahi

Opportunities for Undergraduate Research Experience Program (OURE)

Delivery of the anticancer drug paclitaxel (commercially known as Taxol®) is difficult due to its limited solubility in aqueous media. This study proposes a novel bubble bursting technique to generate nanoparticles of the chemotherapeutic in an effort to decrease potential side effects and improve the bioavailability of hydrophobic drugs. The bubble bursting apparatus will be used to produce nanoparticles of a biodegradable polymer, poly(lactide-co-glycolide) (PLGA), as carriers for paclitaxel. The dissolved paclitaxel in this biodegradable polymer matrix will be released at a controlled rate for a more efficient delivery of the drug throughout the body.

Residential Hip Roof Framing Using Cold-Formed Steel Members, Luke Waldo, Sutton F. Stephens, Roger A. Laboube

American Iron and Steel Institute (AISI) Specifications, Standards, Manuals and Research Reports (1946 - present)

No abstract provided.

Galvanized Steel Framing For Residential Buildings, Nahb Research Center, Inc.

American Iron and Steel Institute (AISI) Specifications, Standards, Manuals and Research Reports (1946 - present)

No abstract provided.

Development Of Cost-Effective, Energy Efficient Steel Framing: Structural Performance Of Slit-Web Steel Wall Studs, Nahb Research Center

CCFSS Library (1939 - present)

No abstract provided.

Development Of Cost-Effective, Energy Efficient Steel Framing: Thermal Performance Of Slit-Web Steel Wall Studs, Nahb Research Center

CCFSS Library (1939 - present)

No abstract provided.

In-Situ Ammonia Removal Of Leachate From Bioreactor Landfills, Nicole Berge

Electronic Theses and Dissertations

A new and promising trend in solid waste management is to operate the landfill as a bioreactor. Bioreactor landfills are controlled systems in which moisture addition and/or air injection are used as enhancements to create a solid waste environment capable of actively degrading the biodegradable organic fraction of the waste. Although there are many advantages associated with bioreactor landfills, some challenges remain. One such challenge is the ammonia-nitrogen concentration found in the leachate. The concentrations of ammonia-nitrogen tend to increase beyond concentrations found in leachate from conventional landfills because recirculating leachate increases the rate of ammonification and results in accumulation …

Feasibility Study Of Evaluating Durability Of Cfrp-Strengthened Beams Using In-Situ Load Test, Carlos Turizo-Rico

Electronic Theses and Dissertations

In Florida a number of highway bridges were retrofitted on their reinforced concrete (RC) girders with carbon-fiber reinforced polymers (CFRP) during the 1990's. Their conditions, after being in service for approximately 10 years, are of significant interest to the State's highway authority, as well as researchers in the region. This paper will evaluate if a load test on one of such bridges, which was retrofitted with CFRP at the girders in the splash-zone and thus was subjected to severe environmental conditions, is a feasible technique to evaluate the actual condition of the CFRP. A 3-dimensional Finite Element Model (FEM) was …

Removal Of Refractory Tkn From An Effluent Wastewater Using Sodium Ferrate, Lucia Lettie

Electronic Theses and Dissertations

This research addresses refractory forms of nitrogen that, even with advanced biological nitrification-denitrification systems are not removed completely from domestic wastewater. TKN (Total Kjeldahl Nitrogen), ammonia plus organic nitrogen, is one of the forms to measure the levels of nitrogen present in effluent wastewaters. Ferrate, a strong oxidant, was used for the treatment of these nitrogen forms with the objective of producing nitrogen compounds that can be removed by subsequent biological processes. Bench-scale experiments were performed on effluent samples taken prior to chlorination from an Orlando, FL wastewater treatment facility, using a biological nutrient removal process. The samples were treated …

Water On Fire, Said Shakerin

All Faculty Articles - School of Engineering and Computer Science

No abstract provided.

The Nature Of Collaboration And The Impact It Has On Workspace Design, Jessica Lacey

Senior Honors Theses and Projects

No abstract provided.

Meaningful Labeling Of Integrated Query Interfaces, Eduard Dragut, Clement Yu, Weiyi Meng

Cyber Center Publications

The contents of Web databases are accessed through queries formulated on complex user interfaces. In many domains of interest (e.g. Auto) users are interested in obtaining information from alternative sources. Thus, they have to access many individual Web databases via query interfaces. We aim to construct automatically a well-designed query interface that integrates a set of interfaces in the same domain. This will permit users to access information uniformly from multiple sources. Earlier research in this area includes matching attributes across multiple query interfaces in the same domain and grouping related attributes. In this paper, we investigate the naming of …

Improving Prediction Accuracy In Mechanistic-Empirical Pavement Design Guide, Scott Schram, Magdy Abdelrahman

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Model calibration plays a fundamental role in the implementation of the mechanistic-empirical pavement design guide. The data used in the default calibration effort, which were afforded by the Long Term Pavement Performance (LTPP) database, have a network-level inference space. As implementation proceeds, state highway agencies may be inclined to calibrate at a local network level. However, with a focus on the calibration data set to local project-level conditions, model prediction error can be reduced further. Under this study, Nebraska Department of Roads Pavement Management System data were used to calibrate two design guide smoothness models at the local project level. …

Study Of Same-Lane And Inter-Lane Gvw Correlation, Bernard Enright, Eugene J. O'Brien, Colin C. Caprani

Conference papers

The methodology used is to generate a number of years of simulated traffic and to use extreme value statistics to predict more accurately the characteristic loading for a given bridge. The parameters and probability distributions used in the Monte Carlo simulation must be based on observed sample traffic data. Some previous studies have made unsubstantiated assumptions regarding correlation between the Gross Vehicle Weights (GVW) of trucks in the same lane, or between trucks in adjacent, same-direction lanes. For this paper, an extensive database of Dutch Weigh-in-Motion data is analysed. Data are collected from two same-direction lanes and are time-stamped to …

Synthesis And Characterization Of Poly(Urethane-Imide)/Poss Nanocomposite, Supanan Patthamasang

Chulalongkorn University Theses and Dissertations (Chula ETD)

A novel type of poly(urethane-imide) (PUI) was prepared by blending the isocyanate terminated polyurethane containing dihydroxy-POSS prepolymer (PU/POSS) and anhydride-terminated polyimide (PI) with various chain lengths of PU/POSS prepolymer and various molecular weights of PI. The effect of chain length of PU prepolymer and molecular weight of PI on the properties of PUI/POSS films was examined. From the results, we found the best condition for synthesis of the PUI/POSS hybrid films is to use the PI prepared via 1 step method with MW of 80,000 and that can prepared the transparent films, follwed by casting films and heat treatment at …

Analyzing Faulty Knowledge Systems In Project-Based Environments: An Empirical Investigation In A R&D Organization, Rafael E. Landaeta, Cesar Ariel Pinto, Timothy G. Kotnour, William R. Peterson

Engineering Management & Systems Engineering Faculty Publications

This investigation contributes a framework of the relationships among the faulty elements of a knowledge system in a project-based organization. The framework was developed during an applied research project at a R&D organization. A knowledge system can be defined as a series of inputs, processes, and outputs that interact with each other with the purpose of enhance the performance and capabilities of an organization or work unit through knowledge. The framework was developed using literature, our experience as applied researchers, and data collected from members of a R&D organization. Data was collected through a survey, interviews, and group meetings. The …

An Integrated Framework For Modeling And Simulation Of The U.S. Southern Border: A Border Patrol Perspective, Shannon R. Bowling, Ghaith Rabadi, Charles Keating

Engineering Management & Systems Engineering Faculty Publications

Border Security is a complex system consisting of many interrelated components that must function as a whole in order to be effective. The efficacy of border security is dependent on several independent agencies; these include U.S. Customs and Border Patrol (CBP), Immigration and Customs Enforcement (ICE), the Department of Justice (DOJ), state and local law enforcement, and many others. Border security is not only a function of how well each of the agencies perform individually but also how well they interact to accomplish a goal. This paper attempts to model border security from a Border Patrol (BP) perspective using discrete …

Designing And Modeling Of A New Continuous Steelmaking Process, Jörg Peter

Doctoral Dissertations

"Continuous steel production has the potential to lower the cost of steelmaking as compared to current batch operations. However, experiences from past attempts to develop and commercialize continuous steelmaking processes show that there are several engineering hurdles to overcome. The objective of this research was the development of a fully continuous steelmaking process that would incorporate the lessons from past experiences, address the foreseen challenges, and meet the requirements to justify the possible replacement of the current EAF-LMF steelmaking route.

The design of the new process consists of five interconnected vessels. Preheated scrap would be continuously charged, melted, and superheated …

Vertical Loads Due To Wheat On Obstructions Located On The Floor Of A Model Bin, Marek Molenda, Michael D. Montross, Sidney A. Thompson, Jozef Horabik

Biosystems and Agricultural Engineering Faculty Publications

Tests were conducted in a model grain bin to evaluate the vertical loads acting on differently shaped obstructions embedded in wheat during filling, detention, and discharge. The bin had corrugated galvanized steel walls with a 1.83 m diameter and a flat bottom. All tests were conducted in a bin that was centrically loaded and unloaded. Three differently shaped obstructions (disc, cone, and cylinder) were tested; each had a circular base equivalent to 6% of the bin floor area. The obstructions were supported in the bin using a three-legged support structure. Each leg of the support structure rested on a load …

Cost-Effective, Structural Stay-In-Place Formwork System Of Fiber-Reinforced Polymer For Accelerated And Durable Bridge Deck Construction, Thomas E. Ringelstetter, Lawrence C. Bank, Michael G. Oliva, Jeffrey S. Russell, Fabio Matta, Antonio Nanni

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

This paper describes research on the evolution of a cost-effective, structural stay-in-place (SIP) formwork bridge deck system with an integrated modular three-dimensional fiber-reinforced polymer (FRF) reinforcement cage. Recent research conducted at the University of Wisconsin is reviewed to show the evolution of the reinforcing system to include an integral FRP SIP form. the evolution occurred through laboratory testing, which was followed by the design and construction of two bridge structures owned by the State of Wisconsin. Each structure used different FRP reinforcement and formwork. These projects pointed out the need for a competitive SIP formwork to be used in conjunction …

Effectiveness Of Open-Graded Base Layer On Subgrade Moisture Regime And Overall Pavement Performance, Hassan Salem, Fouad Bayomy, Robert Smith, Magdy Abdelrahman

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Rockcap (open-graded crushed aggregate with a nominal maximum size of 2.5 in.) base layer is commonly used in the construction of asphalt pavements in Idaho. The effectiveness of the rockcap layer on the subgrade moisture regime and the overall pavement performance were evaluated. Two pavement sites were selected in northern and southern regions of the state. At each site, two pavement sections that are identical and adjacent to each other were instrumented by temperature, frost, and moisture sensors using time domain reflectometry (TDR) probes. One was constructed by a well-graded 3/4-in. aggregate base, whereas the other was constructed by the …

Unifying Value Methodology And Robust Design To Achieve Design For Six Sigma, Vivek K. Jikar, Elizabeth A. Cudney, Kenneth M. Ragsdell, Chuck T. Hui

Engineering Management and Systems Engineering Faculty Research & Creative Works

The concept of product or system function is considered as described in the Taguchi System of Quality Engineering. the importance of transfer functions is also discussed, and a review of conventional value analysis techniques is given. This paper proposes a combination of the principles of robust design and value methodology to enable on-target functionality and direct cost allocation early in the product development process. the discussion on integration of value analysis principles in robust design methodology is provided considering the six-sigma environment. Copyright © 2006 SAE International.

Nanodot-Based Organic Memory Devices, Zhengchun Liu

Doctoral Dissertations

In this study, resistor-type, diode-type, and transistor-type organic memory devices were investigated, aiming at the low-cost plastic integrated circuit applications. A series of solution-processing techniques including spin-coating, inkjet printing, and self-assembly were employed to fabricate these devices.

The organic resistive memory device is based on a novel molecular complex film composed of tetracyanoquinodimethane (TCNQ) and a soluble methanofullerene derivative [6,6]-phenyl C61-butyric acid methyl ester (PCBM). It has an Al/molecules/Al sandwich structure. The molecular layer was formed by spin-coating technique instead of expensive vacuum deposition method. The current-voltage characteristics show that the device switches from the initial 'low' conduction state to …

Low Temperature Co-Fired Ceramics For Micro-Fluidics, John Youngsman, Brian Marx, Martin Schimpf, Scott Wolter, Jeff Glass, Amy Moll

Materials Science and Engineering Faculty Publications and Presentations

The miniaturization of analytical instruments and packaging of novel sensors is an area that has attracted significant research interest and offers many opportunities for product commercialization. Low Temperature Co-fired Ceramics (LTCC) is a materials system composed of alumina and glass in an organic binder. LTCC is a good choice for sensor development because of the ease of incorporating features in the ‘green’ or unfired state such as electrical traces, fluidic pathways and passive electrical components. After a firing cycle, what remains is a robust, monolithic device with features embedded in the package. In order for LTCC to be a successful …

Formalizing Ontology Alignment And Its Operations With Category Theory, Antoine Zimmermann, Markus Krotzsch, Jerome Euzenat, Pascal Hitzler

Computer Science and Engineering Faculty Publications

An ontology alignment is the expression of relations between different ontologies. In order to view alignments independently from the language expressing ontologies and from the techniques used for finding the alignments, we use a category-theoretical model in which ontologies are the objects. We introduce a categorical structure, called V-alignment, made of a pair of morphisms with a common domain having the ontologies as codomain. This structure serves to design an algebra that describes formally what are ontology merging, alignment composition, union and intersection using categorical constructions. This enables combining alignments of various provenance. Although the desirable properties of this algebra …

Measuring Optical Turbulence Parameters With A Three-Aperture Receiver, David Wayne

Electronic Theses and Dissertations

This thesis discusses methods to measure several atmospheric parameters related to turbulence. Techniques used by two different scintillometers based on weak turbulence theory are discussed along with a method to estimate the inner scale developed by Hill. The theory and minimization algorithm used to infer the atmospheric parameters are discussed. The main focus is on the analysis and collection of experimental data with a three-aperture receiver system. Intensity fluctuations from a CW laser source are collected over a 1km path with three different receiving apertures. The scintillation index is found for each receiving aperture and recently developed theory for all …

A Performance Comparison Of Clustering Algorithms In Ad Hocnetworks, Chun Yeung

Electronic Theses and Dissertations

An ad hoc network is comprised of wireless mobile nodes without the need of wired network infrastructure. Due to the limited transmission range of nodes, the exchange of data between them may not be possible using direct communication. Partitioning the network into clusters and electing a clusterhead for each cluster to assist with the resource allocation and data packet transmissions among its members and neighboring clusterheads is one of the most common ways of providing support for the existing ad hoc routing protocols. This thesis presents the performance comparison of four ad hoc network clustering protocols: Dynamic Mobile Adaptive Clustering …