Engineering Commons^™

Condensation On (002) Graphite Of Liquid Bismuth Far Below Its Bulk Melting Point, M. K. Zayed, H. E. Elsayed-Ali

Electrical & Computer Engineering Faculty Publications

Condensation of thermally evaporated Bi on (002) graphite, at temperatures of 300-523K, was studied using in situ reflection high-energy electron diffraction (RHEED) and room temperature ex situ atomic force microscopy (AFM). For deposition at temperatures below 415±5K, transmission RHEED patterns of Bi appeared at an average thickness of ∼0.5 monolayer (ML). AFM images showed that the film consisted of crystallites in the shape of triangular step pyramids with step heights corresponding to single and double Bi layers in the [111] direction. This morphology indicates crystallization from the vapor. For deposition at higher temperatures, diffuse RHEED patterns appeared independent of the …

Interval Neutrosophic Sets And Logic; Theory And Applications In Computing, Haibin Wang, Florentin Smarandache, Yan-Qing Zhang, Rajshekhar Sunderraman

Branch Mathematics and Statistics Faculty and Staff Publications

This book presents the advancements and applications of neutrosophics. Chapter 1 first introduces the interval neutrosophic sets which is an instance of neutrosophic sets. In this chapter, the definition of interval neutrosophic sets and set-theoretic operators are given and various properties of interval neutrosophic set are proved. Chapter 2 defines the interval neutrosophic logic based on interval neutrosophic sets including the syntax and semantics of first order interval neutrosophic propositional logic and first order interval neutrosophic predicate logic. The interval neutrosophic logic can reason and model fuzzy, incomplete and inconsistent information. In this chapter, we also design an interval neutrosophic …

Aeration Strategies And Fan Cost Comparisons For Wheat In Mid-South Production Regions, Thomas C. Bridges, Michael D. Montross, Samuel G. Mcneill

Biosystems and Agricultural Engineering Faculty Publications

Numerous factors influence the sizing of aeration fans for summer-harvested crops. Thirty years of weather data for Lexington, Kentucky, were analyzed and the cost of aeration was compared for two axial fans (afan1, afan2) and one centrifugal fan (cfan1). Aeration costs were defined as the sum of the following components: the cost of owning the fan, the cost of electricity for operating the fan, a cost for wheat shrinkage during aeration, and a cost for dry matter loss (DML). The fans were selected to deliver airflow rates of approximately one, two, and three times the recommended aeration rate of 0.11 …

Streambank Erosion Associated With Grazing Practices In The Humid Region, Carmen T. Agouridis, Dwayne R. Edwards, Stephen R. Workman, José R. Bicudo, Benjamin K. Koostra, Eric S. Vanzant, Joseph L. Taraba

Biosystems and Agricultural Engineering Faculty Publications

The effects of cattle grazing on stream stability have been well documented for the western portion of the U.S., but are lacking for the east. Stream and riparian damage resulting from grazing can include alterations in watershed hydrology, changes to stream morphology, soil compaction and erosion, destruction of vegetation, and water quality impairments. However, few studies have examined the successes of best management practices (BMPs) for mitigating these effects. The objective of this project was to assess the ability of two common BMPs to reduce streambank erosion along a central Kentucky stream. The project site consisted of two replications of …

Onset And Ornament Detection And Music Transcription For Monophonic Traditional Irish Music, Aileen Kelleher

Masters

To date, much has been... This abstract will be longer in due course!

Novel Implementation Of An Adaptive Shared Control Braking System For A Wheeled Walking Aid, Eileen Young

Masters

The focus of this thesis is to design, build and control a prototype walking aid. The frame of the prototype is based on a combination of features from standard, widely available, wheeled walking aids. The user drives the walking aid. New brakes are added to facilitate accurate sensitive controlled stopping of the aid either by the user or automatically. The braking is achieved by the novel use of hydraulic disc brakes as used on mountain bicycles. Braking force is modulated via a linear actuator stepping motor controlled by a local drive. Actualisation of control of both stepping motor and supervisor …

Performance And Robustness Metrics For The Compensation Of Processes With Time Delay, Niall O'Connor

Masters

Proportional-integral (PI) or proportional-integral-derivative (PID) controllers are still by far the most common form of automatic feedback control employed in the process industries at present. It is estimated that more than 90% of control loops in the process control industry are of the PID type. Unfortunately, it is a common occurrence, in the majority of industries where this type of control is employed, for the performance of PI/PID controlled processes to be poor. There are a number of factors influencing this poor performance, namely controller tuning problems, controller equipment design restrictions, deficiencies in control strategy design, etc. The research was …

An Experimental Analysis Of The Call Capacity Of Ieee 802.11b Wireless Local Area Networks For Voip Telephony, Brian Keegan

Masters

The use of the Internet to make phone calls is growing in popularity as the Voice over Internet protocol (VoIP) allows users to make phone calls virtually free of charge. The increased uptake of broadband services by domestic users will further increase the use of VoIP telephony. Furthermore, the emergence of low cost wireless networks (namely IEEE 802.11a/b/g WLANs) is expected to bring wireless VoIP into the mainstream. As the number of wireless hotspots increases more users will want to use VoIP calls wherever possible by connecting to open access points (AP). A major concern with VoIP is Quality of …

An Evaluation Of Model-Based Predictive Control, Daniel Czarkowski

Theses

This thesis attempts to determine whether advanced control algorithms offer any real benefits to the process industry in terms of optimising single-input single output process units. To establish this, an ideal PID controller, Two Degree of Freedom (2 DOF) PID Controller and the Generalised Predictive Controller (GPC) are compared. A common design philosophy is applied based on optimising performance subject to constraints on robustness. Specifically, three different designs are examined; minimum subject to constraints on the gain and phase margin, minimum lAE subject to constraints on the modulus margin and minimum lAE subject to constraints on the input sensitivity function. …

Characterisation, Modelling And Performance Evaluation Of Cmos Integrated Rf-Mems Multielectrode Tunable Capacitor, Zbigniew Olszewski

Theses

The circuits used in telecommunications are made of two types of components; active integrated circuits that have continuously been improved together with the evolution of the Si technology and off-chip and on-chip passive components. The latter did not profit from much development and now constitute the bottleneck for further integration of RF (Radio Frequency) integrated circuits. MicroElectroMechanical Systems (MEMS) is rapidly emerging as an enabling technology to yield a new generation of high performance components to replace off-chip (not integrated) and on-chip (poor performance) counterparts. The RF components (RF-MEMS) that can be fabricated with MEMS technology are mainly the resonator, …

Automated Control Of Led-Based Illumination Using Image Analysis Metrics, Stephen Mills

Theses

This project discusses a microprocessor controlled illumination system that covers the visible spectrum. It uses multiple discrete wavelength LEDs. Spatial and spectral illumination profiles are achieved by controlling LED currents with an array of voltage controlled current sources. A highly efficient polycarbonate holographic diffuser is used to improve the uniformity of the distribution. System design is underpinned by accurate characterisation and modelling of the LEDs used.

Image analysis techniques are then used to parameterise the recorded scene and to provide a figure of merit for the quality of the illumination. Several functions such as contrast, low/high saturation, average brightness and …

Pervaporation Of Water From Solvent Solutions, Richard Manning

Theses

Pervaporation is an emerging membrane technology which has found acceptance as a method for the dehydration of organic solvents.

An existing pervaporation apparatus was modified to accommodate a new type of pervaporation membrane. The instrumentation used with the pervaporation apparatus was upgraded to include a Keithley Data Logger. A HAZOP was carried out on the modified pervaporation apparatus to ensure the apparatus was safe to operate after the modifications were completed.

The pervaporation apparatus was initially tested using screening experiments to verify that changing the operating parameters produced a measurable response which could be recorded. The pervaporation apparatus was successfully …

Multispectral Camera Control And High Speed Image Transfer Using Lossless Hardware Compression, Padraig Ryan

Theses

This work provides extensions of a standard D-Cam/Firewire digital camera platform for use within a multispectral imaging setting and includes real-time lossless image compression targeted at the re-configurable environment of an FPGA. The control and image acquisition structures specific to multispectral systems are detailed with respect to an embedded firmware solution, complementary host PC software driver routines, and camera hardware control infrastructures. The augmentation of the standards based implementation is discussed without compromising compliance with underlying specifications. The mandate for image data acquisition includes glue logic to efficiently transmit data via a high-speed communications pipe, IEEE - 1394 in this …

Controller Design And Web-Based Simulation For A Pasteurisation Process, Luis Torres

Theses

The basic PID controller remains the most commonly used automatic feedback control technique in industry. Many tuning techniques exist for this controller and the use of tuning rules remains very popular, both in industry and academia. This thesis is concerned with the practical evaluation of a selected number of PID tuning rules. The rules were to be evaluated on an industrial pilot-scale milk pasteurisation process. However, most of these rules could not be tested on the real plant as the industrial distributed control system was quite inflexible and did not permit many of the more advanced PID structures e.g. two-degree …

Coupled Thermal Fluid Modelling Of A Low Embedded Energy Solar Thermal Collector, Myrrha Corcoran

Theses

Flat-plate collectors are the most economical and are popular in solar domestic heating water system since they are usually permanently fixed in position, have simple construction, and require little maintenance. The design of a solar energy system is generally concerned with obtaining maximum efficiency at minimum cost. The aim of this thesis was to develop a mathematical model, for a forced convection solar heated water system. The solar collector in this study incorporated a honeycombed extruded polycarbonate structure, for both the cover and water channels.

A very detailed thermal analysis of the flat-plate solar collector was carried out to predict …

Coverage Path Planning And Control For Autonomous Mobile Robots, Mohanakrishnan Balakrishnan

Electronic Theses and Dissertations

Coverage control has many applications such as security patrolling, land mine detectors, and automatic vacuum cleaners. This Thesis presents an analytical approach for generation of control inputs for a non-holonomic mobile robot in coverage control. Neural Network approach is used for complete coverage of a given area in the presence of stationary and dynamic obstacles. A complete coverage algorithm is used to determine the sequence of points. Once the sequences of points are determined a smooth trajectory characterized by fifth order polynomial having second order continuity is generated. And the slope of the curve at each point is calculated from …

Assessing Crash Occurrence On Urban Freeways Using Static And Dynamic Factors By Applying A System Of Interrelated Equations, Rajashekar Pemmanaboina

Electronic Theses and Dissertations

Traffic crashes have been identified as one of the main causes of death in the US, making road safety a high priority issue that needs urgent attention. Recognizing the fact that more and effective research has to be done in this area, this thesis aims mainly at developing different statistical models related to the road safety. The thesis includes three main sections: 1) overall crash frequency analysis using negative binomial models, 2) seemingly unrelated negative binomial (SUNB) models for different categories of crashes divided based on type of crash, or condition in which they occur, 3) safety models to determine …

Design Of A Dynamic Focusing Microscope Objective For Oct Imaging, Supraja Murali

Electronic Theses and Dissertations

Optical Coherence Tomography (OCT) is a novel optical imaging technique that has assumed significant importance in bio-medical imaging in the last two decades because it is non-invasive and provides accurate, high resolution images of three dimensional cross-sections of body tissue, exceeding the capabilities of the current predominant imaging technique –ultrasound. In this thesis, high resolution OCT is investigated for in vivo detection of abnormal skin pathology for the early diagnosis of cancer. The technology presented is based on a dynamic focusing microscopic imaging probe conceived for skin imaging and the detection of abnormalities in the epithelium. A novel method for …

Stem Initiatives: Stimulating Students To Improve Science And Mathematics Achievement, Robert Q. Berry Iii, Philip A. Reed, John M. Ritz, Cheng Y. Lin, Steve Hsiung, Wendy Frazier

STEMPS Faculty Publications

The article focuses on how concepts in science, technology education, and mathematics show powerful relationships when it comes to student learning. Learning theorists believe that, through designed learning environments (contexts) and learning with hands-on projects, new knowledge can not only be learned, but learned in such a way that the knowledge can be transferred for other applications. Scholars in the applied sciences (school science, technology, and mathematics) believe that these subjects have transfer among themselves and that engineering activities can establish the contexts to learn these subjects, plus aid in the transfer of knowledge. This collaborative movement is referred to …

Nonlinear Control And Its Application To Active Tilting-Pad Bearings, Zhijun Cai

LSU Doctoral Dissertations

The drawbacks of active magnetic bearings are arousing interest in the adaptation of mechanical bearings for active use. A promising mechanical bearing candidate for active operation is the tilting-pad bearing. In this research, we introduce an active tilting-pad bearing with linear actuators that translate each pad. The use of feedback in determining the actuator forces allows for the automatic, continuous adjustment of the pad position during the machine operation. In this work, we develop the dynamic model of the active bearing system such that the actuator forces are the control inputs. The hydrodynamic force is modeled as a spring/damper-like force …

Techniques For Low Power Analog, Digital And Mixed Signal Cmos Integrated Circuit Design, Chuang Zhang

LSU Doctoral Dissertations

With the continuously expanding of market for portable devices such as wireless communication devices, portable computers, consumer electronics and implantable medical devices, low power is becoming increasingly important in integrated circuits. The low power design can increase operation time and/or utilize a smaller size and lighter-weight battery. In this dissertation, several low power complementary metal-oxide-semiconductor (CMOS) integrated circuit design techniques are investigated. A metal-oxide-semiconductor field effect transistor (MOSFET) can be operated at a lower voltage by forward-biasing the source-substrate junction. This approach has been investigated in detail and used to designing an ultra-low power CMOS operational amplifier for operation at …

Pah And Pcb Distribution In Sediment Fractions And Sorptive Phases, Trudy J. Estes

LSU Doctoral Dissertations

Contaminant distribution is integral to environmental evaluations of contaminated sediment on every level. The technical and economic feasibility of treatment or beneficial use is a function of the accessibility or separability of the contaminants within the sediment. The magnitude of release to the environment during dredging and disposal is dependent upon the partitioning behavior of the contaminants. Yet, little attention has been paid to contaminant distribution in the fine sediment fractions. Further, conventional distribution coefficients provide little information regarding the relative contaminant loading of each of the sorptive phases. Bioavailability of contaminants in oil and grease, soot and organic carbon, …

Fabrication Of Core-Shell Nanoparticles, Zhanhu Guo

LSU Doctoral Dissertations

Metallic Cu and Au shells were fabricated around cobalt nanoparticles. A new technique to coat nanoparticles with carbon coatings and poly(methyl methacrylate) (PMMA) was developed. The copper shell formation is a self-limiting process. A thin copper shell (0.82 nm) around the cobalt nanoparticle (1.56 nm) enhanced the magnetic property by increasing the blocking temperature from 124 K to 235 K for nanoparticles with a copper shell. The formed gold shell (0.67 nm) enhanced the cobalt nanoparticle magnetic property by increasing the blocking temperature above room temperature. The magnetic moment in the Co-Cu and Co-Au core-shell nanoparticle is much higher than …

Multiphase Mechanisms And Fluid Dynamics In Gas Injection Enhanced Oil Recovery Processes, Madhav M. Kulkarni

LSU Doctoral Dissertations

Currently, the Water-Alternating-Gas (WAG) process is the most widely practiced horizontal mode gas injection process in the industry. Although this process is conceptually sound, it has resulted in low (5 – 10%) oil field recoveries. Conversely, the gravity stable mode of gas injection has carved its niche as one of the most effective methods of gas injection EOR in the dipping reservoirs and pinnacle reefs. The Gas Assisted Gravity Drainage (GAGD) process is therefore being developed at LSU to extend these highly successful gravity stable applications to horizontal type reservoirs. The dissertation attempts to address six key questions: (i) do …

Laterally Movable Gate Field Effect Transistor (Lmgfet) For Microsensor And Microactuator Applications, In-Hyouk Song

LSU Doctoral Dissertations

Laterally Movable Gate Field Effect Transistor (LMGFET) invented at LSU as a microactuator is the subject of study in this research. The gate moving in lateral direction in a LMGFET changes channel width but keeps the channel length and the gap between the metal gate and the gate oxide constant. LMGFET offers linear change in drain current with gate motion and a large displacement range. This research is the first demonstration of LMGFET. In this dissertation, a post-IC LIGA-like process for LMGFET microstructure fabrication has been developed that is compatible with monolithic integration with CMOS circuitry. A two-mask post-IC process …

Development Of High Performance Hybrid Syntactic Foams: Structure And Material Property Characterization, Rahul R. Maharsia

LSU Doctoral Dissertations

Syntactic foams are light weight particulate composites that use hollow particles (microballoons) as reinforcement in a polymer resin matrix. High strength microballoons provide closed cell porosity which helps in reducing weight of the material. Due to their wide range of possible applications such as in aerospace and marine structures, it is desirable to modify the physical and mechanical properties of syntactic foams as per the requirements of an application. Various filler materials can be used to modify the foam microstructure to attain these desired properties. Compression tests have revealed that high density syntactic foams demonstrate poor damage tolerance and low …

Anisotropic Diffusion Of N-Butane And N-Decane On A Stepped Surface, Shrijay Subramaniyan, Jee-Ching Wang

Chemical and Biochemical Engineering Faculty Research & Creative Works

The diffusion of single n-butane and n-decane molecules on a model stepped surface, Pt(655), and on a corresponding flat surface, Pt(111), is investigated using molecular-dynamics simulations and anisotropic united atom model. The surface step on Pt(655) causes the alkane molecules to adsorb on the lower terrace in all-trans conformations with their long molecular axes adjacent and parallel to the step edge, and to diffuse anisotropically along the surface step via a constant wiggly motion without rotation or marked deviation from the parallel adsorption configuration. At relatively high temperatures, the alkane molecules can temporarily break away from the step edge but …

Implementing Simple Protocols In Multiple Processors Control Applications, Steve Hsiung, Tyson Mccall, Corinne Ransberger

Engineering Technology Faculty Publications

Using microprocessor/microcontroller in various control applications is not only one of the major topics in Engineering Technology curricula, but also of interest in industry applications. To accomplish it correctly the process of designing application programs starts from the individual module development through extensive testing, verification, and modification. Applying these developed modules in a useful manner requires the links and integrations that lead to the practical project implementation. Frequently, in students' senior project designs and faculty's research plans, the microprocessor/microcontroller resources become scarce or cause conflicts during the modules' integration stage. To accommodate the shortfall of the resources and resolve any …

A Template Functional-Gage Design Using Parameter-File Table In Autodesk Inventor, Cheng Lin, Moustafa Moustafa

Engineering Technology Faculty Publications

A systematic approach using Autodesk Inventor to design the functional gages of Geometric Dimensioning & Tolerancing (GD&T) is presented. The gages can be used to check straightness, angularity, perpendicularity, parallelism, and position tolerances of a part when geometric tolerances are specified with Maximum Material Condition (MMC). Four steps are proposed to accomplish the task: (1) creation of two-dimensional (2-D) initial template files, (2) generation of hierarchical folders for the template files, (3) creation a 3-D gage model from a specific template file, and (4) dimensioning and generation of the gage drawing. Results show that, by following this approach, students can …

Management Of Extremes In The Configuration Of Interoffice Telephone Switch & Priority Systems, C. Ariel Pinto

Engineering Management & Systems Engineering Faculty Publications

This paper describes how to enable diverse enterprise customers for voice-data switch to achieve in configuration a balance among users, features, and perceived reliability subject to extremes of traffic. The analysis entailed the simulation of the voice-data switch with embedded priority system, generation of latency times for various configurations and transaction traffic rates, and the development of a framework and theoretical propositions for configuration of super-saturated systems. It was shown that the concept of tolerance levels defined in the risk of extreme events can be applied for embedded priority systems and was the basis for the application of the zone-configuration …