Engineering Commons^™

Photocatalytic Treatment Of Heavy Metal Waste Cr(Vi) Withtio2 Photocatalyst, Slamet Slamet, Riyadi Syakur, Wahyu Danumulyo

Makara Journal of Technology

Photocatalytic Treatment of Heavy Metal Waste Cr(VI) with TiO2 Photocatalyst. The photocatalytic reduction of hexavalent chromium/Cr(VI) using TiO2 and copper-doped TiO2 as photocatalysts have been studied in stirred tank and circulating photoreactors. All photocatalysts were characterized with FTIR (Fourier Transform Infra Red), BET (Brunauer-Emmett-Teller), XRD (X-Ray Diffraction) and SEM (Scanning Electron Microscope). TiO2 Merck and Degussa P-25 are the commercial photocatalysts used to compare the photocatalytic activity of all the prepared catalysts. Blank test experiments as well as the effect of dopants, EDTA (ethylenediaminetetraacetic acid) and activated carbon addition were studied. Cr(VI) reduction on various pH and initial Cr(VI) concentration …

Development And Analysis Of Geographic Information System For Electricity Network (Case Study: Surabaya Industrial Estate Rungkut In Surabaya)., Lilik Jamilatul Awalin, Bangun Muljo Sukojo

Makara Journal of Technology

Development and Analysis of Geographic Information System for Electricity Network (Case Study: Surabaya Industrial Estate Rungkut in Surabaya). Geographic Information System (GIS) is a system of data which has spatial base. This may be cause has ability to process and analysis data quickly. The ability of GIS will be able to process the alternative in decision making. The need of electric power grows until recent time along with the existence of industrial sector expansion and land use expansion claim better service, large and balance stock of electric power. GIS is a solution for planning and managing data base system, for …

Application Of Remote Sensing And Geographic Information System Methods For Land Using Difference, Bangun Muljo Sukojo, Diah Susilowati

Makara Journal of Technology

Application of Remote Sensing and Geographic Information System Methods for Land Using Difference. Land using difference analysis has been done using remote sensing and Geographic Information System (GIS) methods. Identification of land using difference was conducted using map overlaying process of 1990s (digitized scalling 1:50.000) and 1997s land using map (interpreted from Landsat TM (Thematic Mapper) Image 1997) with UTM (Universal Transverse Mercator) coordinate. Image enhancement was done through histogram equalization with supervised classification devided into 7 classes: rice field, settlement, dry field, industry, pond, sport field and bush. Land using difference and river pollution BOD (Biological Oxygen Demand), COD …

Phase Composition Analysis Using Rietveld Methode And It's Influence To The Hardness Of Ti-Si-N Nanocomposites, Keba Moto, Lia Setiarini, Zufar Abubakar

Makara Journal of Technology

Phase composition analysis using rietveld methode and it’s influence to the hardness of Ti-Si-N nanocomposites. XRD data of nanocomposites Ti-Si-N have been analysed using GSAS based on Rietveld Method in order to identify phases and their composition as well as its influence on the hardness of these nanocomposites. Several new phases have been found in the sample beside the nc-TiN/a-Si3N4& a-/nc-TiSi2 that have been known widely. From the obtained crystalline phase, after the calculation of amorf Si3N4 and TiSi2 phase fraction, it is found that the optimum hardness can be reached when the fraction of a-Si3N4 phase around 8 wt.%

Influence Of Strain Rate And Temperature Of Hot Tension Testing On Mechanical Properties Of Medium Carbon Steel S48c, Dedi Priadi, Iwan Setyadi, Eddy S. Siradj

Makara Journal of Technology

Influence of Strain Rate and Temperature of Hot Tension Testing on Mechanical Properties of Medium Carbon Steel S48C. The characterization of S48C by hot tension testing was done to understanding the influence of temperature and strain rate for S48C flow stress, that close relationship with its forge ability. The hot tension testing was performed on temperatures and strain rates variation (T 850, 900, 950 0C and έ 0,01;1 s-1). The result of hot tension testing showed that increasing temperature decreases ultimate tensile strength (UTS) and flow stress of S48C. The higher decreasing of UTS is on 950 0C about 85% …

A Growth Mixture Theory For Cartilage With Application To Growth-Related Experiments On Cartilage Explants, Stephen M. Klisch, Silvia S. Chen, Robert L. Sah, Anne Hoger

Mechanical Engineering

In this paper, we present a growth mixture model for cartilage. The main features of this model are illustrated in a simple equilibrium boundary-value problem that is chosen to illustrate how a mechanical theory of cartilage growth may be applied to growth-related experiments on cartilage explants. The cartilage growth mixture model describes the independent growth of the proteoglycan and collagen constituents due to volumetric mass deposition, which leads to the remodeling of the composition and the mechanical properties of the solid matrix. The model developed here also describes how the material constants of the collagen constituent depend on a scalar …

A Study In Java Bytecode Engineering With Pcesjava, Martin R. Linenweber

All Computer Science and Engineering Research

This thesis reports on experience with PCESjava, a collection of tools which we have developed for the purpose of aiding programmers. Particular applications optimize and instrument JAVA bytecode programs. Using these tools, we have successfully identified impediments to real-time performance in a popular JAVA collections object. Our approach here is based on automatic instruction to obtain traces that show paths whose execution time is not reasonably bounded. We also report on the application of our tool to reduce program footprint in JAVA programs by rewriting the bytecodes to occupy less space. Our transformations also improves the running time of set …

Aviation Safety And Security: A Call For Educating The Flying Public, Mariann Elizabeth Abbonizio

Doctoral Dissertations and Master's Theses

Aviation safety and security: A call for educating the flying public, is an account and testimonial to the problem of the lack of aviation safety and security knowledge by the flying public in the National Airspace System (NAS). It discusses the confusion over both new (post 9-11-01) and old (pre 9-11-01) security regulations as well as basic passenger safety recommendations and advice that could possibly save hundreds of lives. It will discuss the need for a public education campaign regarding aviation safety and security for the American flying public, and point to past public educational campaigns in different realms as …

Data Collection System For Putting Analysis, Joel Oostdyk

Masters Theses

A system was designed and built to measure four different physiological variables of a golf putting action. Putters as well as weight pads were outfitted with strain gages while optical sensors were used to detect the golf ball presence. Through the use of this equipment the data relating to weight shift between the golfer’s feet, strain on the putter shaft, and golf ball velocity was recorded. A computer with the Linux operating system was equipped with a data acquisition card and programs were written so the computer could collect data. A graphical user interface was also added to simplify the …

Two Dimensional Numerical Simulation Of Highly-Strained Hydrogen-Air Opposed Jet Laminar Diffusion Flames, Kyu C. Hwang

Mechanical & Aerospace Engineering Theses & Dissertations

In this study, a detailed 2-D numerical technique is utilized to investigate the structure, and flame extinction and restoration characteristics of laminar hydrogen-air opposed jet diffusion flames, using both plug (uniform) and parabolic inflow boundary conditions for 3 millimeter jet tubes, spaced 6 millimeters apart and imbedded in low velocity coflows.

First, by using the most recent of two chemical kinetic models, excellent agreement was obtained between calculated distributions of temperature and major species, and published UV laser Raman scattering measurements, for 50% and 100% hydrogen-air flames over a range of input strain rates. Agreement with measured OH profiles was …

Use Of Eps-Filled Tires As Lightweight Construction Material, Sethapong Sethabouppha

Civil & Environmental Engineering Theses & Dissertations

The purpose of this research is to study the possibility of recycling discarded automobile tires as a lightweight construction material by injecting expanded polystyrene (EPS) into the hollow space of the tires. The observation from compression tests on used tires revealed that the tread wall of these tires bent toward their own center. This inward deformation should provide confining stress to the contained EPS, and thus the compressive strength of EPS-tire composite was expected to be higher than that of EPS.

To produce EPS-filled tire prototypes for this study, EPS type II, with density of 24 kg/m3, was injected into …

Building Customer Trust In Mobile Commerce, Keng Siau, Zixing Shen

Research Collection School Of Computing and Information Systems

Customer trust, which is crucial for the growth and success of mobile commerce, is discussed. Building customer trust is a complex process that involves technology and business practices as well as movement from initial trust formation to continuous trust development. Gaining customer trust involves consideration of its three components: competence trust, predictability trust and goodwill trust. From a customer's perspective, competence trust in e-commerce is built upon the Internet vendor's skills, expertise and operational abilities.

Output Analysis Of Configurable Port Simulation, Ravikiran Jogu

Electrical & Computer Engineering Theses & Dissertations

The Configurable Port Simulation (CPortS) is a simulation of military cargo moving through a commercial seaport during a force deployment. CPortS simulates cargo at the individual entity level of detail. Simulation at the individual entity level generates huge amounts of output data making the output analysis difficult. To understand the reasons as to why bottlenecks occur in the process of cargo clearance, an analyst needs to be able to partition the data during analysis, not a priori. This makes the estimation of required graph generation impossible, which demands a very dynamic output analysis tool that can enable the analyst to …

Automatic Speaker Identification Using Reusable And Retrainable Binary-Pair Partitioned Neural Networks, Ashutosh Mishra

Electrical & Computer Engineering Theses & Dissertations

This thesis presents an extension of the work previously done on speaker identification using Binary Pair Partitioned (BPP) neural networks. In the previous work, a separate network was used for each pair of speakers in the speaker population. Although the basic BPP approach did perform well and had a simple underlying algorithm, it had the obvious disadvantage of requiring an extremely large number of networks for speaker identification with large speaker populations. It also requires training of networks proportional to the square of the number of speakers under consideration, leading to a very large number of networks to be trained …

A Representation Scheme For Finite Length Strings, Guarav Tandon, Debasis Mitra

Electrical Engineering and Computer Science Faculty Publications

This study is an attempt to create a canonical representation scheme for finite length strings to simplify the study of the theory behind different classes of patterns and to ease the understanding of the underlying separability issues. This could then be used to determine what kinds of techniques are suitable for what class of separability (linear, multi-linear, or non-linear). This representation can then be used in intrusion detection, biological sequences, pattern recognition/classification and numerous other applications.

Numerical Studies On Supersonic Mixing And Combustion Phenomena, Tarek M. Abdel-Salam

Mechanical & Aerospace Engineering Theses & Dissertations

A numerical study is conducted to investigate the mixing, combustion, and flow characteristics of different scramjet-combustor configurations. Three-dimensional models for the combustors have been used. Numerical results are obtained using a finite volume computational fluid dynamics (CFD) code with unstructured grids with sizes between 200,000 and 400,000 cells.

In the first part of the current study, the effects of the side angle of the fuel injectors in both mixing and combustion processes are investigated. Raised (compression) and relieved (expansion) wall-mounted ramps are used with side angles of 0 (unswept), 5, and 10 degrees. Results are obtained for nonreacting flows as …

Fuzzy System Identification Based Upon A Novel Approach To Nonlinear Optimization, Raymond Scott Starsman

Electrical & Computer Engineering Theses & Dissertations

Fuzzy systems are often used to model the behavior of nonlinear dynamical systems in process control industries because the model is linguistic in nature, uses a natural-language rule set, and because they can be included in control laws that meet the design goals. However, because the rigorous study of fuzzy logic is relatively recent, there is a shortage of well-defined and understood mechanisms for the design of a fuzzy system. One of the greatest challenges in fuzzy modeling is to determine a suitable structure, parameters, and rules that minimize an appropriately chosen error between the fuzzy system, a mathematical model, …

Microreactor System With Immobilized Enzyme On Polydimethylsiloxane (Pdms) Polymers, Zonghuan Lu

Doctoral Dissertations

Microsystems, specifically microreactors, open the gate to new, improved analytical techniques while offering many advantages for a large number of applications in chemical engineering, pharmacy, medicine, and biotechnology. This study explored the feasibility of fabrication of microreactors using polydimethylsiloxane (PDMS) as a support for enzyme immobilization. Urease enzyme was used for catalyzing the conversion of urea to ammonia.

PDMS (polydimethylsiloxane) is a silicone-based elastomeric polymer. Traditional micromanufacturing technology was employed for reactor mold fabrication. The mold was fabricated based on photolithography techniques, and SU-8 photoresist was used to construct reactor structure templates. The resulting silicon-wafer based reactor molds were then …

Variation Of Domain Formation In A 15 Nm Nife Layer Exchange Coupled With Nio Layers Of Different Thicknesses, Z.Y. Liu, Shireen Adenwalla

Materials Research Science and Engineering Center: Faculty Publications

The correlation between ferromagnetic domain formation and exchange bias in a series of NiFe/NiO samples with varying NiO thicknesses has been investigated using the magneto-optic Kerr effect and magnetic force microscopy. Below a critical thickness (15 nm) of NiO, the exchange bias H_E is zero and ripple domains exist in the NiFe layer. Above this critical thickness, cross-tie type domain walls appear concurrently with the appearance of exchange bias. Both the number of cross-tie domain walls and the exchange bias increase with an increase in NiO thickness, reaching a maximum at 35 nm NiO, after which both show a …

A Machine Learning Approach To Anomaly Detection, Philip K. Chan, Matthew V. Mahoney, Muhammad H. Arshad

Electrical Engineering and Computer Science Faculty Publications

Much of the intrusion detection research focuses on signature (misuse) detection, where models are built to recognize known attacks. However, signature detection, by its nature, cannot detect novel attacks. Anomaly detection focuses on modeling the normal behavior and identifying significant deviations, which could be novel attacks. In this paper we explore two machine learning methods that can construct anomaly detection models from past behavior. The first method is a rule learning algorithm that characterizes normal behavior in the absence of labeled attack data. The second method uses a clustering algorithm to identify outliers.

Utilisation Of Bagasse Fly Ash And Carbon Waste From Fertiliser Plant For Treatment Of Pyridine And 3-Picoline Bearing Wastewater, Indra Deo Mall, Sanjay Tewari, Nripendra Singh, Indra Mani Mishra

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The present work explores the possibility of utilizing sugarcane bagasse fly ash and carbon waste obtained from sugar mills and nitrogenous fertilizer plants, respectively for the removal of pyridine and 3-picoline from waste water. The adsorbing capacity of both adsorbents has been compared with that of activated carbon. Batch studies were conducted to see the effect of contact time, adsorbent dose, initial concentration and pH on the removal of pyridine and 3-picoline. Equilibrium data were fitted with Langmuir and Freundlich isotherms. Adsorptive capacities were found to be in the order: activated carbon > carbon waste > bagasse fly ash. Adsorption was found …

Studies On The Use Of Carbon Waste Generated From Fertiliser Plant In Waste Water Treatment, Indra Deo Mall, Sanjay Tewari, Nripendra Singh

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Carbon waste generated from fertiliser plant has been used for adsorption studies for the removal of chromium, zinc and nickel and COD from industrial effluent from phenol formaldehyde plant, polyester plant, sugar plant. Removal to the extent of 91.40, 86.8, 93.8 percent was achieved at the initial concentration of 10 mg/1 for Cr(VI), Ni(TI) and Zn(II) respectively using carbon waste as adsorbent Removal of these metals were found to be in order of Zn(II) > Cr(VI) > Ni(II). In a multi cationic solution containing these three metals, Cr(VI) adsorbed preferentially over Ni(II) and Zn(II). COD removal of 67.51%, and 86.4 % was …

Cansat 2003, Robert J. Twiggs

Robert "Bob" Twiggs STEM Education Collection

A PowerPoint Presentation created by Professor Bob Twiggs titled "CanSat 2003" from March 25, 2003.

Interaction Energy Surfaces Of Small Hydrocarbon Molecules, Richard L. Rowley, Jukka-Pekka Jalkanen, Tapani A. Pakkanen, Yan Yang

Faculty Publications

Nonbonding interactions of small alkane molecules were studied with ab initio methods. Previously reported energy data for ethane and propane dimers were supplemented with 1747 new configurations of dimers involving slightly larger hydrocarbons. The completed work provides interaction energy surfaces for all combinations of dimer pairs involving ethane, propane, isobutane, and neopentane and thus contains information of all chemical groups found in acyclic alkanes. The strongest attraction of the studied molecule pairs was encountered in isobutane C2h dimer, where an energy minimum of -1.784 kcal mol^-1 at 4.28 Angstroms separation of centermost carbon atoms was observed. The composite data set …

Quakesat: Earth Detection Nano-Satellite, Robert J. Twiggs

Robert "Bob" Twiggs STEM Education Collection

A PowerPoint Presentation created by Professor Bob Twiggs titled "QuakeSat: Earth Detection Nano-Satellite" from March 21, 2003.

Beyond The Big Dig, Robert Turner

New England Journal of Public Policy

For more than a decade, from the day that the decision was made to put Boston’s Central Artery underground, many forward-looking planners and designers have been conjuring up visions of the mile-long street-level corridor that would replace the elevated highway, reshaping the heart of downtown. By the end of 2001, the corridor had acquired a name, the Rose Kennedy Greenway, but work was far more advanced on the traffic tunnel underground than on the open space above. These precious twenty-seven acres had the potential to flower into a magnificent, vibrant urban oasis that would become known the world over. But …

Mar 2003, Tractor Museum

Lester F. Larsen Tractor Museum: Planning and Development Documents

Foundations Liason Report Development Projects Report Report to the Director

An Approach To Concept Development For Compliant Mechanisms Possessing High Coefficients Of Restitution, Brandon H. Woolley

Theses and Dissertations

The design of structures and mechanisms subject to impact loading has historically involved designing in such a way as to minimize damage induced by the impact. This has historically been accomplished by absorbing and dissipating the energy of the impact. However, in some applications it is desirable to harness the energy and return it to the impacting object to maximize the coefficient of restitution (COR), resulting in large rebound velocities. The use of traditional rigid-body mechanisms to achieve high-COR mechanisms is limited by issues of friction, durability, poor strain-energy distribution and others. Compliant mechanisms do not possess the same limitations …

Modeling, Fabrication, And Optimization Of Niobium Cavities Phase Ii: Third Quarterly Report, Robert A. Schill Jr., Mohamed Trabia

Transmutation Sciences Materials (TRP)

Niobium cavities are important parts of the integrated NC/SC high-power linacs. Over the years, researchers in several countries have tested various cavity shapes. They concluded that elliptically shaped cells are the most appropriate shape for superconducting cavities. The need for very clean surfaces lead to the use of a buffered chemical polishing produce for surface cleaning to get good performance of the cavities. The second phase has resulted in an experimental setup of a fluid flow experiment with experimentation to be completed in the third year. Other experimental activities include the evaluation of a vacuum system and various vacuum equipment …

Technology And Methodology For The Production Of High Quality Polymer Filler And Super-Pozzolan From Fly Ash, Thomas L. Robl, John G. Groppo

Center for Applied Energy Research Faculty Patents

A novel method for producing fly ash material with a range of particle sizes from about 2.0 to about 4.0 μm is provided utilizing superplasticizers. The method produces fly ash material suitable for use as filler material in the plastics industry and super pozzolan for the concrete industry.