Engineering Commons^™

Dynamic Multiphysics Model For Solar Array, Shengyi Liu, Roger A. Dougal

Faculty Publications

An approach to model the solar cell system with coupled multiphysics equations (photovoltaic, electro-thermal, direct heating and cooling processes) within the context of the resistive-companion method in the Virtual Test Bed computational environment is presented. Appropriate across and through variables are defined for the thermal terminal of the system so that temperature is properly represented as a state variable, rather than as a parameter of the system. This allows enforcement of the system power conservation through all terminals, and allows simultaneous solutions for both the electrical potentials and the system temperature. The thermal port built accordingly can be used for …

Airborne Radar Interference Suppression Using Adaptive Three-Dimensional Techniques, Todd B. Hale

Theses and Dissertations

This research advances adaptive interference suppression techniques for airborne radar, addressing the problem of target detection within severe interference environments characterized by high ground clutter levels, levels, noise jammer infiltration, and strong discrete interferers. Two-dimensional (2D) Space-Time Adaptive Processing (STAP) concepts are extended into three-dimensions (3D) by casting each major 2D STAP research area into a 3D framework. The work first develops an appropriate 3D data model with provisions for range ambiguous clutter returns. Adaptive 3D development begins with two factored approaches, 3D Factored Time-Space (3D-FTS) and Elevation-Joint Domain Localized (Elev-JDL). The 3D adaptive development continues with optimal techniques, i.e., …

A Model For Optimizing The Selection Of Project Delivery Systems Using Analytic Hierarchy Process (Ahp), Arosha De Silva

Masters Theses

The project delivery systems applicable to the construction industry in the U.S. consist of different approaches. This study focuses on three main approaches, (1) Design-Bid-Build (DBB), (2) Design-Build (DB), and (3) Construction Management (CM). Since each construction project is unique, selecting the right project delivery system is a tough decision.

This study develops a decision making system, based on the Analytic Hierarchy Process (AHP), for selecting the best delivery system for a given construction project. AHP is a decision making mathematical model developed by Thomas L. Saaty and consists of a hierarchical structure. It analyzes several alternatives for a given …

An Interactive Visual Environment For Scientific Problem Solving, Georg F. Mauer

Mechanical Engineering Faculty Research

Science and engineering students do not typically receive explicit training in scientific problem solving, i.e. applying science principles to specific situations. Students’ problem solving skills often show little improvement throughout their course of studies. This paper describes a structured, graphical, interactive (GUI) learning environment, which presents problems and tools for analysis in systematic and logical order, and encourages the student to develop the solution path in the manner of an experienced expert. The learning environment’s subject area is Engineering Dynamics, which was selected for its systematic structure and its early (usually sophomore) place in the undergraduate curriculum. The software presents …

Alternative Ways To Teaching Hvac And Related Subjects Through Actual Project Involvement-Three Case Studies, Samir F. Moujaes

Mechanical Engineering Faculty Research

No abstract provided.

Development Of A Model For Induction Heating, Randy Clarksean, Yitung Chen

Fuels Campaign (TRP)

There are two coupled equations that must be solved in order to determine the power deposition. The numerical solution of these equations is needed in order to apply a source term within the energy equations. These equations have previously solved in FIDAP. That implementation used modified versions of the momentum and energy equations to provide a mechanism for the solution of two coupled equations. Currently, we want to solve for the induction heating field in addition to the flow field and the energy equation. In order to do this, a mechanism has to be defined within FIDAP to solve these …

A Simplistic Plasma Dust Removal Model Employing Radiation Pressure, Robert A. Schill Jr.

Electrical & Computer Engineering Faculty Research

A simple heuristic model is developed to examine the feasibility of using radiation pressure as a means to transport plasma dust out of the path of the forthcoming electron or photon beam. A slow electromagnetic surface wave coupled to a planar target or substrate exerts the required pressure in the removal process. The model is examined using data and parameters from single-shot radiography experiments. Optimal source requirements are identified for a typical radiography experiment. Source energies and powers are a minimum over an optimum band of frequencies where both conduction and plasma oscillation effects are mutually significant. Above the band …

Implementation Of Large Neural Networks Using Decomposition, Henry Selvaraj, H. Niewiadomski, P. Buciak, M. Pleban, Piotr Sapiecha, Tadeusz Luba, Venkatesan Muthukumar

Electrical & Computer Engineering Faculty Research

The article presents methods of dealing with huge data in the domain of neural networks. The decomposition of neural networks is introduced and its efficiency is proved by the authors’ experiments. The examinations of the effectiveness of argument reduction in the above filed, are presented. Authors indicate, that decomposition is capable of reducing the size and the complexity of the learned data, and thus it makes the learning process faster or, while dealing with large data, possible. According to the authors experiments, in some cases, argument reduction, makes the learning process harder.

Low Salinity Flooding In A Selected Carbonate Reservoir: Experimental Approach, Mohamed Yehia Mohamed Mahmoud

Theses

Low-salinity water flooding LoSal^TM has been used to improve oil recovery for many decades. Historically, the mechanisms behind this improvement in oil recovery were attributed to the pressure maintenance and displacement of oil by injected water, i.e. physical mechanism. Recently, evidence from laboratory and field tests indicated that water flooding also involves chemical processes and that modifying of the injection brine salinity and its ionic composition can significantly impact the oil recovery. Several theories regarding the mechanism of LoSal^TM flooding have been discussed in the literature. These include interfacial tension reduction, wettability alteration (cation exchange), change in pH …

Logic Synthesis Of Reversible Wave Cascades, Alan Mishchenko, Marek Perkowski

Electrical and Computer Engineering Faculty Publications and Presentations

A circuit is reversible if it maps each input vector into a unique output vector, and vice versa. Reversible circuits lead to power-efficient CMOS implementations. Reversible logic synthesis may be applicable to optical and quantum computing. Minimizing garbage bits is the main challenge in reversible logic synthesis. This paper introduces an algorithm to generate the cascade of reversible complex Maitra terms (called here reversible wave cascade) implementing incompletely specified Boolean functions. The remarkable property of the presented method compared to other reversible synthesis methods is that it creates at most one constant input and no additional garbage outputs. Preliminary estimation …

On The Intrinsic Evolution Of Material Inhomogeneities, Marek Elźanowski, Marcelo Epstein

Mathematics and Statistics Faculty Publications and Presentations

The evolution of a distribution of material inhomogeneities (defects, dislo-cations, etc.) is investigated. Adopting our recently developed model of the anelastic evolution law of a defective solid crystal body and using the classical methods of the theory of hyperbolic waves we analyze such phenomena as the long-term relaxation of defects and the dislocation pile-up.

Cuin1-Xalxse2 Thin Films And Solar Cells, P. D. Paulson, M. W. Haimbodi, S. Marsillac, R. W. Birkmire, W. N. Shafarman

Electrical & Computer Engineering Faculty Publications

CuIn[sub 1-x]Al[sub x]Se[sub 2] thin films are investigated for their application as the absorber layer material for high efficiency solar cells. Single-phase CuIn[sub 1-x]Al[sub x]Se[sub 2] films were deposited by four source elemental evaporation with a composition range of 0≤x≤0.6. All these films demonstrate a normalized subband gap transmission >85% with 2 µm film thickness. Band gaps obtained from spectroscopic ellipsometry show an increase with the Al content in the CuIn[sub 1-x]Al[sub x]Se[sub 2] film with a bowing parameter of 0.62. The structural properties investigated using x-ray diffraction measurements show a decrease in lattice spacing as the Al content increases. …

Autonomous Hierarchical Control Of Multiple Unmanned Combat Air Vehicles (Ucavs), Timothy Mclain, Randal W. Beard, Sai-Ming Li, Jovan D. Boskovic, Sanjeev Seereeram, Ravi Prasanth, Jayesh Amin, Raman K. Mehra

Faculty Publications

In this paper we present a hierarchical control scheme that enables multiple UCAVs to achieve demanding missions in hostile environments autonomously. The objective is to use a swarm of UCAVs for a SEAD type mission: fly the UCAVs in a formation to an enemy territory populated with different kinds of threats, collect enemy information or destroy certain targets, and return to the base, all without human intervention. The scheme is an integration of four distinct components, including: (1) high level Voronoi diagram based path planner to avoid static threats; (2) low level path planner to avoid popup threats; (3) differential …

Validation Of Sea Ice Motion From Quikscat With Those From Ssm/I And Buoy, David G. Long, Yunhe Zhao, Antony K. Liu

Faculty Publications

Arctic sea ice motion for the period from October 1999 to March 2000 derived from QuikSCAT and ocean buoy observations. Special Sensor Microwave/Imager (SSM/I) data using the wavelet analysis method agrees well with ocean buoy observations. Results from QuikSCAT and SSM/I are compatible when compared with buoy observations and complement each other. Sea ice drift merged from daily results from QuikSCAT, SSM/I, and buoy data gives more complete coverage of sea ice motion. Based on observations of six months of sea ice motion maps, the sea ice motion maps in the Arctic derived from QuikSCAT data appear to have smoother …

Bi-Axially Loaded Slender Reinforced Concrete Columns Subjected To Sustained Loads, Song Gu

Dissertations

A generalized analytical approach is presented in this research to predict the behavior both of slender and short reinforced concrete columns under sustained biaxial eccentric load.

The present analysis proposes equations established at a cross section of a reinforced concrete column by combining force equilibrium, constitutive law, and compatibility conditions. The strain and curvature of each section and the deflection of the column can then be obtained and resolved.

The established creep computation models, recommended separately by American Concrete Institute (ACI) 209R-92 and the Comite' Euro-International du Be'ton (CEB)-FIP 1990 Model Code have been used to calculate creep and shrinkage …

The Development Of H Homogeneous Nucleation Rate Model For Thermoplastic Foams Based On A Molecular Partition Function And Fickian Diffusion, Ronald G. Gabbard

Dissertations

An improved homogeneous nucleation rate model for thermoplastic foams has been developed. This model does not rely on experimentally determined parameters and only uses pure component physical property data and a binary diffusion coefficient. This model, like those derived from classical nucleation theory, is made up of two parts, one that determines the size of the energy barrier in the nucleation process and one that estimates the forward rate of the process. A statistical-mechanical approach was used to create an energy term that is based on a molecular partition function. In this approach, the bulk phase (polymer and blowing, agent …

Destructive Disassembly Of Bolts And Screws Using Impact, Kyung Geun Pak

Dissertations

Disassembly, the process of separating parts or components at the end of their useful life is complex due to a variety of fastener shapes and variability in their damage during use. As a natural solution, mechanical impact has been suggested as a cost-effective method for destructive disassembly of joining elements.

The objective of this research is to improve the efficiency of impact disassembly process by studying the characteristics of elastic waves caused by impact. This research presents a new method for increasing the shear stress applied on the bolt head without increasing the energy input invested on launching striker. The …

Complete Stress-Strain Characteristics Of High Performance Concrete, Insang Lee

Dissertations

High performance concrete (HPQ has recently become a widely used concrete construction material for modem buildings, bridges, and pavements, etc. To produce such a better quality of concrete, chemical and mineral admixtures such as fly ash, slag cement, and silica fume, ground granulated blast furnace slag, as well as air-entraining agents are commonly used in the field construction. It has been found that high perforinance concrete can improve the workability, ultimate strength and durability of the concrete. However, the enhancement of ductility in concrete, and concrete structures as a whole is still inconclusive and needs more research. The ductility can …

Theory And Design Of Mixed Lumped-Distributed Cross-Coupled Filters With Applications To Linear Phase Shifter And Tunable Filters, Sanghoon Shin

Dissertations

Using cross-coupled networks of a new concept, transmission zeros were efficiently located in the complex frequency-domain. With this approach, the group delay and attenuation slope of the circuit network can be controlled to get both sharp rejection characteristics and linear phase slopes. In order to achieve this performance, various types of combline filters are suggested. Various simulation tools (commercial linear circuit and E-M simulators), as well as the developed pole-zero locator program, were used to design a new class of cross-coupled networks. In particular, the polezero locator program can be used to extract an equivalent circuit of the topology that …

Process Control Of A Laboratory Combustor Using Neural Networks, Thana Slanvetpan

Dissertations

Active feedback and feedforward-feedback control systems based on static-trained feedforward multi-layer-perceptron (FMLP) neural networks were designed and demonstrated, by experiment and simulation, for selected species from a laboratory two stage combustor. These virtual controllers functioned through a Visual Basic platform. A proportional neural network controller (PNNC) was developed for a monotonic control problem - the variation of outlet oxygen level with overall equivalence ratio (Φ₀). The FMLP neural network maps the control variable to the manipulated variable. This information is in turn transferred to a proportional controller, through the variable control bias value. The proposed feedback control methodology …

Analysis Of Costs And Delivery Intervals For Multiple-Release Software, High-Way Sun

Dissertations

Project managers of large software projects, and particularly those associated with Internet Business-to-Business (B2B) or Business-to-Customer (B2C) applications, are under pressure to capture market share by delivering reliable software with cost and timing constraints. An earlier delivery time may help the E-commerce software capture a larger market share. However, early delivery sometimes means lower quality. In addition, most of the time the scale of the software is so large that incremental multiple releases are warranted.

A Multiple-Release methodology has been developed to optimize the most efficient and effective delivery intervals of the various releases of software products, taking into consideration …

Experimental Studies Of Wave Propagation In Three-Dimensional Photonic Crystals, John M. Tobias

Dissertations

Photonic crystals were proposed fifteen years ago. Propagation is selectively prevented through these crystals resulting in a photonic band gap, that is, a frequency region where light cannot propagate. These frequency bands are analogous to electronic band gaps in solid-state crystals.

The optical properties of the photonic crystal in regions near the band gap remain relatively unexplored. Yet, there is significant evidence to suggest that this avenue of investigation can provide useful optical and microwave applications. Numerical studies have predicted that the effective permittivity near the photonic band gap approaches zero and becomes negative. Selfcollimation of the propagating beam and …

A Bi-Level Programming Approach For The Shipper-Carrier Network Problem, Ya Wang

Dissertations

The Stackelberg game betweenshippers and carriers in an intermodal network is formulated as a bi-levelprogram. In this network, shippers make production, consumption, androuting decisions while carriers make pricing and routing decisions.The oligopolistic carrier pricing and routing problem, which comprisesthe upper level of the bi-level program, is formulated either as a nonlinearconstrained optimization problem or as a variational inequality problem,depending on whether the oligopolistic carriers choose to collude orcompete with each other in their pricing decision. The shippers' decisionbehavior is defined by the spatial price equilibrium principle. Forthe spatial price equilibrium problem, which is the lower level of thebi-level program, a …

Development Of Icejet-Based Surface Processing Technology, Dimitri V. Shishkin

Dissertations

The objective of the proposed work is to acquire knowledge needed for the development and deployment of manufacturing processes utilizing the enormous technological potential of water ice. Material removal by blasting with ice media such as particles, pellets and slugs was investigated. The ice media was accelerated by entrainment in a fluid stream (air, steam, liquid water, supercritical C0₂), impact of rotating blades, fluid expansion, etc. The ice-airjet has to replace sand blasting and the ice-waterjet has to replace the abrasive waterjet. Based on these results, technical approaches for surface processing and machining will be improved. A primary …

Concurrent Evaporating Spray Jets In Dilute Gas-Solid Pipe Flows, Xiaohua Wang

Dissertations

Evaporating spray jets into gas-solids suspensions are encountered in many industrial applications. The rapid evaporation of spray jets has significant effects on the gas-solids mixing near the jet nozzle regions, including non-uniform solids concentration dilution, gas/solids temperature reduction, and gas/solids velocity acceleration. Furthermore, the jet structure is altered by the change of solids loading, jet mass flow rate and initial droplet size distribution. These interactions of gas, solids and evaporating droplets dominate the process efficiency and product quality. There is an urgent need for exploring fundamental mechanisms of the multi-phase interactions with heat and mass transfer as there are few …

Elasticity In Microstructure Sensitive Design Through The Use Of Hill Bounds, Benjamin L. Henrie

Theses and Dissertations

In engineering, materials are often assumed to be homogeneous and isotropic; in actuality, material properties do change with sample direction and location. This variation is due to the anisotropy of the individual grains and their spatial distribution in the material. Currently there is a lack of communication between the design engineer, material scientist, and processor for solving multi-objective/constrained designs. If communication existed between these groups then materials could be designed for applications, instead of the reverse. Microstructure sensitive design introduces a common language, a spectral representation, where both design properties and microstructures are expressed.

Using Hill bounds, effective elastic properties …

Experiments With A Galton Board, Christopher Oshman

Theses

Galton boards have been used for over a half-century as a tool to illustrate the formation of Gaussian shaped distributions as well as the Central Limit Theorem. Here, the Galton board was used to study the spontaneous percolation of a particle through an ordered array of rigid scatterers. The apparatus that was designed and fabricated provided a means to release 1/8" diameter spheres one at a time in a controlled and precise manner at any location on the board. The three experimental variables used in these experiments were the particle material, the release height, and the board tilt. angle. The …

Absorption Of Co2 Through Hollow Fiber Membranes Using Aqueous Solutions Of Various Absorbents, Praveen Babu Kosaraju

Theses

Absorption behavior of CO₂ was studied in different hollow fiber membrane modules fabricated using Celgard (polypropylene) and poly(4-methylpentene-1) microporous hollow fibers. Pure water, aqueous solutions of poly(amidoamine) (PAMAM) dendrimer of generation zero and monoethanolamine (MEA) were used as the absorbent; the absorbent solution flowed through the fiber bore, the gas mixture of C02 and N2 flowed countercurrently on the shell side. The system consisted of absorption in one module and stripping with Helium in another module of the same fibers. The absorption characteristics of the dendrimer solution and the MEA solution were studied in the modules built of Celgard …

Development Of A Method To Examine Shear Stress On Cardiomyocytes, Dhawal Desai

Theses

Cardiac hypertrophy is the remodeling or enlargement of the heart exhibited by individuals suffering from heart disease. Cardiac hypertrophy involves two mechanisms, mechanical stresses and humoral changes in the cardiac tissue. One such humoral change involves the Renin Angiotensin System (RAS). The primary fimction of RAS is maintenance of hemodynamics of the body mediated through an effector protein, Angiotensin 11. However, RAS has been shown to play a significant role in the pathophysiology of the heart; contributing to hypertension, cardiac hypertrophy and myocardial infarction. RAS acts through binding of Angiotensin 11 at its receptors. The two forms of Angiotensin 11 …

Current Requirements By Electro Hydrodynamic Filter Systems Under Shipboard Operation Conditions, Ravi Shankar Attri

Theses

An experimental study was performed to determine the current required by an ElectroHydrodynamic (EHD) filter system to clean contaminants from Diesel Engine Lubrication Oil under normal shipboard operation conditions. The amount of current at a set predetermined voltage, which together means Power, was needed in order to anticipate the power required to perform a Shipboard Site Test Evaluation of the EHD filter.

The filter uses the effect of dielectrophoresis to separate contaminants from the lubrication oil. The filter operates at two thousand volts (2KV ac-rms) and thus requires substantial current to energize its electrodes. This type of Power is not …