Engineering Commons^™

On The Selection Of Simulation Software For Manufacturing Application, Amr Arisha, Mohie El Baradie

Conference papers

The growing complexity of manufacturing along with the need for higher efficiency, greater flexibility, better product quality and lower cost urged the use of simulation in manufacturing systems. The number and variety of simulation software packages on the market increased as well. Consequently, the varieties of these packages led to some bewilderment on the part of potential users when faced the selection process. The present article addresses an overview of material addressed in journals, conferences, and textbooks on the selection of appropriate simulation software. It also suggests a classification of main criteria to be considered in evaluating simulation software packages. …

Facilitated K+ Ion Transfer By Db18c6 Across The Micro Liquid/Liquid Interface, Dong-Ping Zhan, Bing-Liang Wu

Journal of Electrochemistry

A novel microcavity Ag|AgCl electrode was fabricated to construct the micro-interface of two immiscible electrolyte solutions(ITIES). The transfer reactions of K⁺ ion facilitated by DB18C6 across the water/1,2-DCE interface was investigated with the three-electrodes system. The corresponding reaction parameters were derived from the voltammetric data. The results showed that the microcavity electrode would be a useful and efficient tool to investigate the charge transfer reactions at ITIES.

Pure Hap Film Prepared By Direct Electrodepositing On Metallic Surface And Its Mechanism, Hao-Bing Hu, Chang-Jian Lin, Fei Chen, Ren Hu, Ming Guo

Journal of Electrochemistry

In controlling concentration of Ca²⁺ and PO₄^3- in electrodeposition solution, the HAP film on Ti alloy has been deposited directly. Using XRD and SEM we have learned that prepared HAP is intact in crystal and equal in dimension. Thermodynamic calculation indicated that the HAP is easer formation of than that TCP of. With the XRD, SEM analyses and thermodynamic calculation, the electrodeposition mechanism has been discussed. It was proved that electrodepositon is a two-stage process and formation of HAP is a direct process from solution ions to HAP crystal without precursor.

Electrochemical Techniques For Measuring Anti-Corrosion Behavior Of The Thin Corrosion Inhibitor Layer To The 907a Steel, Yong-Tao Zhao, Jian-Hua Wu, Fan-Cai Chen, Zhong-Ping Gao, Jia Wang, Chang-Jiu Zhao

Journal of Electrochemistry

The corrosion inhibiting behavior of 907A steel, which was covered with thin inhibitor layers in moist seawater atmosphere,was studied. The electrochemical measurements, including EIS method and the coulostatic method, were used to atmospheric corrosioed monitor (ACM) under thin inhibitor layers to determine its corrosion rate. The results shown that the application of electrochemical methods such as the coulostatic technique and EIS could readily detect the on going process of film formation. Hence, the rapid evaluation of the thin inhibitor layers for 907A steel might be possible.

Initial Stages Of Copper Electrodeposition On Glassy Carbon Electrode, Ling Huang, Rui Zhang, Min Gu, Fang-Zu Yang, Shu-Kai Xu, Shao-Min Zhou

Journal of Electrochemistry

Initial stages of copper electrodeposition on glassy carbon electrode from acid sulphate solutions were studied using cyclic voltammetry and chronoamperometry. The electrolyte solution was a 0.05 mol.L^-1 copper sulphate, 1.4～1.8 mol⋅L^-1 sulphuric acid containing 1 mg·L^-1 2-mercaptobenzoimidazole, Results show that 2-mercaptobenzoimidazole produced an inhibition of the copper deposition, probably related to the adsorption,sulphuric acid promote copper electrodeposition. The initial deposition kinetics corresponded to a model including instantaneous nucleation and diffusion controlled growth.Addition of 2-mercaptobenzoimidazole and sulphuric acid did not change the initial nucleation of copper electrocrystallization, it increased the nucleation rate and the number density of nuclei …

Xrd Study On Highly Preferred Orientation Cu Electrodeposit, Min Gu, Fang-Zu Yang, Ling Huang, Shi-Bing Yao, Shao-Min Zhou

Journal of Electrochemistry

Copper electrodeposit was obtained in CuSO₄+H₂SO₄ electrolyte solution by electrodeposition and its structure was studied by XRD. The results showed that copper electoddeposits with the highly preferred orientations of (220) and (111) could be obtained at current density 4.0 A/dm² and 15.0 A/dm², respectively. The texture coefficient (TC) values were increased by thickness of Cu deposits. The thickness would be, to obtain Cu electrodeposit with (111) highly preferred orientation, about 7 times of that of (220) highly preferred orientation, which indicated that(220) face was easier to be remained than (111) face and …

Optimum Of Catalyst Layers For Direct Methanol Fuel Cells, Jun Zhang, Lei Li, Li Xu, Yu-Xin Wang

Journal of Electrochemistry

The performances of membrane electrode assemblies (MEAs)with various Pt loading were compared. The amount of Nafion in a catalytic layer was optimized, and the effect of Nafion loading on the resistance of MEAs was investigated with ac impedance spectroscopy. For a MEA with both Pt 4 mg/cm² in the anode and the cathode, suitable Nafion loading was 21.4 wt% in the anode. With 21.4 wt% Nafion loading in the cathode, the Direct Methanol Fuel Cells(DMFC) showed the highest performance at high current density. While, the DMFC performances came down, as Nafion loading increasing,for ohm and concentration polarization.

Ionic Conduction In Ba0.95Ce0.9Y0.1O3 - Α Solid Oxide And Its Performance In Fuel Cell, Gui-Lin Ma, Ding-Xian Jia, Li-Gan Qiu, Hui Shi, Rong Chen

Journal of Electrochemistry

Using Ba_0.95Ce_0.9Y_0.1O_3-α as a solid electrolyte and porous platinum as electrodes,hydrogen and oxygen concentration cells and hydrogen-air fuel cell were constructed, respectively. Electromotive forces (MEFs) of the gas concentration cells and I-V characteristics of the fuel cell were detdrmined in the temperature range of 600～1 000 ℃. The Ba_0.95Ce_0.9Y_0.1O_3-α exhibited almost the pure protonic conduction under hydrogen gas,and a mixed conduction of oxide-ion and electron hole with oxide-ion transport number of 0.3～0.5 under oxygen gas. It exhibited a mixed conduction of proton and oxide-ion with the …

Electrochemical Properties Of Nitrate Immobilized On Gold Electrodes With 2-Aminoethanethiol Sams, Ya-Ru Song, Hong Wu, Hui-Bo Shao

Journal of Electrochemistry

Nitrate reductase (NR) and phospholipids were immobilized on gold electrodes with 2-aminoethanethio(AET) SAMs. After Au/AET/NR and Au/AET/NR/lipid were soaked in pH 7 phosphate buffers for days, a pair of pre-reversible peak appeared at around 0.202 V and 0.149 V respsctively, irregularly grew with soaking time in blank buffer.The cathodic peak current (i_pcl) of Au/AET/NR system had linear relationship with scan rate between 0.02 and 0.5 V⋅s^-1 ,while i_pcl was proportional to V^1/2 in Au/AET/NR/lipid system. The direct electron transfer of enzyme electrodes was strongly affected by pH. Compared with Au/AET, NR exhibited a higher electrochemical …

Study On Modification Of Spinel Limn2O4 By Overcoating, Ren-Gang Zhang, Shi-Xi Zhao, Jung-Lei Xia, Han-Xing Liu

Journal of Electrochemistry

The surface of spinel LiMn₂O₄ was modified by the sol-gel process with LiCoO₂-coated LiMn₂O₄ and studied by XRD, SEM and EPMA. The results have shown that the surface of the coated grains heated at 700 ℃ for 10h, which is cubic spinel, were Co-rich. The amount of Co³⁺ in the grains changed owing to different place of the grain and decreased from surface to inner parts. Using the coated as the cathode of Li-ion cells, the initial capacity deceased slightly, but the amount of Mn²⁺ solving in electrolyte decreased, Jahn-Teller …

Some Consideration For Lithium-Ion Cells' Safety, Guang-Xia Hu, Jing-Ying Xie

Journal of Electrochemistry

The safety is the most important problem for lithium ion cells, especially for large lithium ion cells. In this paper, some information about lithium ion cells' safety can be learned by discussing several aspects of lithium ion cells, such as, materials of lithium ion cell, manufacturing processes, using conditions and so on.

Study On Hydrogen Evolution Performance Of Nickel-Tin Electrode, Tian-Yi Chang, Bao-Hong Zhang, Wenbo Cong, Yao Luo

Journal of Electrochemistry

The cathode active material with low hydrogen evolution overvoltage was prepared by electroplating Ni-Sn alloy on the ferrous basic body.This kind of material can be applied in the diaphragm type of electrolytic tank to decrease cell voltage and save energy. On the condition according with cathode solution in the electrolytic tank (NaOH 120 g/L, NaCl 190 g/L, 90 ℃, i=150 mA/cm²), the overvoltage of hydrogen evolution was 88 mV. By the X-ray diffraction analysis, it was found that the structure of this kind of material was different from that of Ni-Sn alloy applied in traditional decoration. By using …

Electrochemical Degradation Of Organic Wastewater By Three-Dimensional Electrode Reactor, Chun He, Tai-Cheng An, Ya Xiong, Dong Shu, Hui-Ling Hu, Xi-Hai Zhu

Journal of Electrochemistry

The electrochemical degradation of aniline was investigated using a novel electrochemical reactor, three-dimensional electrode reactor. The experimental results indicated that the reactor could efficiently remove aniline. The removal efficiency could be attributed to a combination of direct and indirect electrochemical reactions, that is, anodic oxidation and oxidation of electrogenerated H₂O₂ and hydroxyl radicals generated in electro-Fenton process. It was also observed that the removal efficiency was significantly dependent on applied voltage, Fe²⁺ concentration, pH value and electrolysis time. In the experimental range they all have a positive effect on the removal efficiency except for pH value. …

Synthesis And Characterization Of Lini0.8-XAlXCo0.2O2 As Cathodes For Lithium-Ion Batteries, Jun Zhang, Zhong-Kao Jin, Qing-He Yang, Qing-Mei Song, Xiao-Hua Ma, Xiang-Fu Zong

Journal of Electrochemistry

Single-phase solid solution of LiNi_0.8-xAl_xCo_0.2O₂ (0≤ x <0.1)had been synthesized and characterized by X-ray diffraction(XRD) and scanning electron microscopy (SEM). Their electrochemical performance was examined by charge-discharge cycling. The LiNi_0.71Al_0.09Co_0.2O₂ compound showed a discharge capacity of 152 mAh/g after 20 cycles that corresponds to 97.4% capacity retention. The beneficial effect of co-doping with Al and Co elements was corro-borated by slow scanning cyclic voltammograms(SSCV), electrochemical impedance spectrum (EIS) and differential scanning calorimetry (DSC) data on charged cathodes. These results show that the 2D-character of the crystal lattice was stabilized by co-doping with Al and Co, the phase transitions that occur during deintercalation or intercalation of Li-ions were significantly suppressed, …

Diffusion Of Hydrogen At Iron Apply For Electrochemical Oscillating Permeation, Li Zhang, Ren-He Yin, Zhan-Mei Sun

Journal of Electrochemistry

The diffusion of hydrogen in iron was measured using electrochemical oscillating permeation. Through the samples in the different frequencies, it was found that diffusion of hydrogen at iron is of linear relation with boundary condition, which is the key to Fick's diffusion equation amplitude in the liquor. We can exploit this line relation getting the diffusion of hydrogen at iron.

Research Progress On Electrode Material In All-Vanadium Redox Battery, Hua Li, Shou-Wen Chang, Chuan-Wei Yan

Journal of Electrochemistry

An all-vanadium redox flow storage battery possesses many advantages over conventional storage batteries.The development statue of two types electrode materials (metal and compound type) is introduced in this article.

Modification Of Molybdenum Nitride Electrode For Supercapacitor(I)——The Effect Of Ammonium Vanadate On The Properties Of Molybdenum Nitride Electrode, Xue-Liang Li, Dao-Rong Luo, Hua-Lin Wang, Jian-Bo He, Yun-Guei Zhu

Journal of Electrochemistry

The effect of vanadium on the properties of the electrode of molybdenum nitride has been studied by using XRD, SEM and cyclic voltammetry. Modified molybdenum nitride was made as follow: films were coated by dipping titanium sheet in the solution containing different composition of molybdenum oxide, ammonium vanadate, ammonia, glycol and oxalic acid, and coated films are reacted with free ammonia. The results show that the specific capacitance of modified electrode was considerably increased and the operation voltage was broadened with the addition of ammonium vanadate in the dipping solution. The mechanism of these effects generated is the formation of …

Dielectric Properties Of A Ferroelectric Copolymer Langmuir–Blodgett Film, Mahantappa S. Jogad, Stephen Ducharme

Stephen Ducharme Publications

We report measurements of the real (epsilon prime) and imaginary (epsilon double-prime) parts of the relative complex permittivity of a Langmuir–Blodgett film of ferroelectric copolymer of vinylidene fluoride (70%) with trifluoroethylene (30%). The measurements were made in the temperature range of 35 to 125° C, and frequency range of 19 Hz to 5 MHz. The results indicate low frequency loss due to conduction and dielectric loss peak near the ferroelectric–paraelectric phase transition.

Field Guide To The Geology Of The Harlan County Lake Area, Harlan County, Nebraska, With A History Of Events Leading To Construction Of Harlan County Dam, Robert F. Diffendal Jr., Duane R. Mohlman, R. George Corner, F. Edwin Harvey, K. J. Warren, Scott Summerside, Roger K. Pabian, Duane A. Eversoll

School of Natural Resources: Faculty Publications

The year 2002 will mark the fiftieth anniversary of completion of the Harlan County Dam and Multi-Purpose Reservoir. This seems a good time to write about the history of and reasons for building the dam, the effects of the dam and reservoir on the Republican River valley, and the geologic features seen along the shores of the lake and areas nearby. As many junior authors helped produced this educational circular, they are listed in the table of contents. All other sections were written by the senior author.

Includes July 2016 update: Addendum of photographs showing fault traces on drought-exposed lake …

Electrically-Small Low Q Radiator Structure And Method Of Producing Em Waves Therewith, Craig A. Grimes, Dale M. Grimes, Faton Tefiku, Gang Lui

Chemical and Materials Engineering Faculty Patents

An electrically small radiator structure for radiating electromagnetic waves having an electrical size, k*a, with a value less than π/2 and above π/20,000 and configured to have at least a first and second magnetic, or electric, dipole element. Dipole elements are preferably oriented such that a source-associated standing energy value for the structure, or W_ds(t_R), is low, Radiative Q value preferably less than ⅓(k*a)³; and each of the elements, whether paired with respective electric dipole elements, is in electrical communication through a feed circuit to at least one power source. Further, a first …

Calibrattions Of Cold-Formed Steel Welded Connections, F. M. Tangorra, R. M. Schuster, Roger A. Laboube

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

The purpose of this project was to recalibrate the welded connection equations currently contained in the American Iron and Steel Institute (AISI) Specification for the Design of Cold Formed Steel Structural Members (AISI 1996a). Only one factor of safety of 2.50 is presented for the each of the various types of welded connections when using allowable stress design (ASD), but different respective resistance factors are given for load and resistance factor design (LRFD). The data used was solely taken from the research conducted by Pekoz and McGuire (Pekoz and McGuire 1979). Calibrations were carried out and based on both the …

A Study On The Factors That Influence The Acoustic Performance Of A Steel Stud Wall Assembly, Hyun-Suk Chung, Gap-Deug Kim, Kwan-Seob Yang, Kyung-Woo Kim

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

With the recent introduction of light gauge steel framing systems in the concrete-dominated Korean construction industry, more buildings are built with drywall that is mainly composed of steel studs and gypsum boards. While load-bearing steel studs are extensively applied in residential construction, nonload-bearing steel studs are applied in various building fields such as commercial, educational, as well as residential. As building projects involving steel stud walls are becoming to increase, higher demands in performance are requested from architects and builders, especially in the field of sound performance. A series of acoustic test were performed in the nationally certified sound-testing laboratory …

Aisi Committee On Framing Standards Enabling The Widespread And Economic Useof Steel Framing, Kevin R. Bielat, Jay W. Larson

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

The American Iron & Steel Institute launched the Committee on Framing Standards in 1998 with the mission to eliminate regulatory barriers and increase the reliability and cost competitiveness of cold-formed steel framing through improved design and installation standards. Building on the internationally recognized AISI Specification, and working closely with the Steel Framing Alliance, Light Gauge Steel Engineers Association, Steel Stud Manufacturers Association and Canadian Sheet Steel Building Institute, this relatively new organization has developed and published four new ANSI-accredited consensus standards. Topics include General Provisions, Truss Design and Header Design, as well as a comprehensive Prescriptive Method for One and …

North American Specification For Design Of Cold-Formed Steel, Roger L. Brockenbrough, Helen H. Chen

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

For over fifty years, the American Iron and Steel Institute has published the widely used Specification for the Design of Cold-Fom1ed Steel Structural Members. Recently, as a result of collaborative efforts with representatives of Canada and Mexico, the AISI Specification was expanded into a new document for use in all three countries. Now known as the North American Specification for the Design of Cold-Formed Steel Structural Members, the new edition supersedes the previous AISI Specification and the Canadian Sl36 Standard. This paper reviews the differences between the previous AISI Specification and the new North American Specification. The basic core document …

Ua3/9/5 Complex For Engineering & Biological Sciences Groundbreaking, Wku President's Office

WKU Administration Documents

Remarks delivered by WKU president Gary Ransdell at the groundbreaking of the Complex for Engineering & Biological Sciences.

Ua1b1/7 Groundbreaking For Complex For Engineering & Biological Sciences, Wku Office Of Event Planning

WKU Administration Documents

Program for the Complex for Engineering & Biological Science groundbreaking ceremony.

Ua1b1/7 Groundbreaking Complex For Engineering & Biological Sciences, Western Kentucky University

WKU Administration Documents

Invitation to the Complex for Engineering & Biological Sciences groundbreaking.

Trends. Aviation Terrorism's Winning Hand, Ibpp Editor

International Bulletin of Political Psychology

This article discusses aviation security, terrorism, and the psychology behind pilot motivations for opting out of flying members of the Israeli government to Israel.

A Combined Adaptive Tabu Search And Set Partitioning Approach For The Crew Scheduling Problem With An Air Tanker Crew Application, Todd E. Combs

Theses and Dissertations

This research develops the first metaheuristic approach to the complete air crew scheduling problem. It develops the first dynamic, integrated, set-partitioning based vocabulary scheme for metaheuristic search. Since no benchmark flight schedules exist for the tanker crew scheduling problem, this research defines and develops a Java™ based flight schedule generator. The robustness of the tabu search algorithms is judged by testing them using designed experiments. An integer program is developed to calculate lower bounds for the tanker crew scheduling problem objectives and to measure the overall quality of solutions produced by the developed algorithms.

Development Of A Systems Engineering Model Of The Chemical Separations Process: Quarterly Progress Report 5/16/02- 8/15/02, Yitung Chen, Randy Clarksean, Darrell Pepper

Separations Campaign (TRP)

Two activities are proposed in this Phase I task: the development of systems engineering model and the refinement of the Argonne code AMUSE (Argonne Model for Universal Solvent Extraction). The detailed systems engineering model is the start of an integrated approach to the analysis of the materials separations associated with the AAA Program. A second portion of the project is to streamline and improve an integral part of the overall systems model, which is the software package AMUSE. AMUSE analyzes the UREX process and other related solvent extraction processes and defines many of the process streams that are integral to …