Engineering Commons^™

Effects Of Handedness On Completion Time During Performance Of Multiple Tasks Using “Proper” And “Improper” Tools, Lisnnette M. Nieves Suarez

Master's Theses - Daytona Beach

Handedness is a very critical factor involving single or multiple tasks that are designed for a specific hand. The purpose of this research was to investigate the effect of proper tool design. This research identified the dominant hand and measured task completion time between each of two tasks, 1) the use of left and right-handed scissors using the right hand, and 2) Mouse Manipulation Task using the calculator provided by the computer with a left and right-handed mouse using the right hand. Annett’s (1995) 12-item questionnaire was used to identify the preferred hand. This questionnaire consisted of having the participants …

The Effects Of Sound Cue Characteristics On Overcoming Front/Back Localization Errors In A 3-D Auditory Display, Robert J. Ehmann

Master's Theses - Daytona Beach

The purpose of this study was to investigate the performance effects of adding an additional sound cue characteristic to a 3-D auditory display sound stimulus to increase localization accuracy. Previous literature has provided evidence that localization accuracy for direct front and direct back regions is significantly worse than that of locations in the periphery for virtual 3-D auditory stimuli. In the study conducted, a highpass filter addition or a lowpass filter addition was compared to a "normal" condition for both the front and back locations. Results of the study showed that the best localization performance for the front location occurred …

Acuta Enews July 2001, Vol.30, No. 7

ACUTA Newsletters

In This Issue

Meet the 2001-02 Board

ACUTA Staff Changes

DC Update

Section 508 Sets New Standards

Board Report

FSO and Eye Safety

Welcome New Members

Positions Available

Job Shop Scheduling Problem: An Overview, Amr Arisha, Paul Young, Mohie El Baradie

Conference papers

The Job-shop scheduling is one of the most important industrial activities, especially in manufacturing planning. The problem complexity has increased along with the increase in the complexity of operations and product-mix. To solve this problem, numerous approaches have been developed incorporating discrete event simulation methodology. The scope and the purpose of this paper is to present a survey which covers most of the solving techniques of Job Shop Scheduling (JSS) problem. A classification of these techniques has been proposed: Traditional Techniques and Advanced Techniques. The traditional techniques to solve JSS could not fully satisfy the global competition and rapidly changing …

Evaluation Of Residual Chlorothalonil Levels On Processing Tomato Foliage Using The Tom-Cast Spray Program, Jane M. Patterson, Sue E. Nokes, Mark A. Bennett, Richard E. Riedel

Biosystems and Agricultural Engineering Faculty Publications

Field tomatoes were sprayed with chlorothalonil on a fixed–interval spray program and a TOM–CAST spray program with disease severity value threshold of 18. Foliage samples from upper and lower canopy layers were collected prior to spray re–applications. Chlorothalonil residue data were compared to the chlorothalonil efficacy threshold (1.2 μg/cm²). Using a seven–day interval program, eight of the nine and seven of the nine spray intervals had chlorothalonil residues above the critical level for the upper and lower canopy layers, respectively. Using the TOM–CAST program, four of the five spray intervals had chlorothalonil residues above the critical level for …

Influence Of Inoculum Size On Phytase Production And Growth In Solid-State Fermentation By Aspergillus Niger, Chundakkadu Krishna, Sue E. Nokes

Biosystems and Agricultural Engineering Faculty Publications

Solid–state fermentation is experiencing renewed interest for industrial enzyme production. Previous studies on the effects of fungal inoculum size on product yield have focused on spore inoculum. However, some organisms require vegetative inocula. This study investigated the effects of initial inoculum colony age, vegetative inoculum size, and duration of fermentation on the production of fungal biomass and phytase in solid–state fermentation using Aspergillus niger grown on wheat bran and soy meal. Initial inocula from 7– and 14–day–old potato dextrose agar (PDA) plates were used to study the effect of inoculum colony age in liquid culture and its further influence on …

Near-Field Microwave Non-Invasive Determination Of Nacl In Mortar, Karl Joseph Bois, Aaron D. Benally, R. Zoughi

Electrical and Computer Engineering Faculty Research & Creative Works

In recent years near-field microwave nondestructive testing and evaluation techniques have shown great promise for evaluating different properties of cement-based structures. An important issue regarding the inspection of these structures is the ability to determine the presence and evaluate the content of chloride in them. Chlorides can be introduced in these structures in many different ways including when salts are present in their mixing water. Consequently, for this investigation, two sets of 8" × 8" × 8" (203mm) cubic mortar specimens were prepared each with a water-to-cement (w/c) ratio of 0.5 and 0.6, respectively, and both sets with sand-to-cement ratios …

Benzene Toxicity And Removal In Laboratory Phytoremediation Studies, Joel Gerard Burken, Carla Ross, Lisa M. Harrison, Adrian Marsh, Lars Zetterstrom, Juel S. Gibbons

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Hybrid Poplar Cuttings Were Shown to Impact the Fate and Transport of Subsurface Benzene, While Toxicity to the Poplars Was Not Observed. Laboratory Experiments Investigated the Toxicity Response of Poplar Cuttings to Benzene Exposure, Contaminant Distribution in Plant Tissues, Contaminant Degradation in the Soil Profile, and Contaminant Volatilization from the Soil and Plant Tissues. Two Separate Studies Were Conducted to Evaluate These Parameters. the First Study Examined the Toxicity of Benzene to Hybrid Poplar Cuttings in Batch Reactors. Poplar Cuttings Were Exposed to Various Concentrations of Benzene Contaminated Water in Two Different Types of Soil. Transpiration Rates Were Measured as …

Feedback Correction Of Angular Error In Grating Readout, Monish Ranjan Chatterjee, Sundaram Ramachandran

Electrical and Computer Engineering Faculty Publications

Angular and wavelength READ beam errors in holographic interconnection systems are often a recurrent problem. Several strategies have been proposed to minimize or eliminate such READOUT misalignments.

Some years ago, Chatterjee and co-workers proposed a method involving READ beam wavelength tuning to correct output angular errors. In this paper, we investigate the possibility of using an acousto-optic (A-O) Bragg cell with optoelectronic feedback to dynamically correct the scattered beam for deviations in the incidence direction of the READ beam of a hologram. The concept here is based on an acoustic frequency feedback strategy used recently by Balakshy and Kazaryan for …

The Effect Of Target Position And Tactual Recognition Field Size On Touch Bias And Accuracy, Elizabeth L. Brix

Master's Theses - Daytona Beach

Past studies have shown that touchscreen display angles other than those that perpendicularly bisect the operator's line of sight cause the operator to touch slightly below the target. The amount of touch bias created from this misjudgment fluctuates according to the target's position on the screen. Additionally, the percentage of touches that activate a specific target varies according to the size of the tactual recognition field. Out of three square tactual recognition field sizes, this study sought to match these fields with the amount of touch bias occurring in each location (i.e., small amount of touch bias requires only a …

Public Involvement In Highway Improvement: A Comparison Of Three Different Visualization Modes For A Case Study In Central Kentucky, Joel Brumm, Keiron Bailey, Ted H. Grossardt

Kentucky Transportation Center Faculty and Researcher Publications

Public involvement in highway improvement presents a set of complex problems involving many stakeholders.Since visualizations are increasingly regarded as essential tools in this process, a clearer understanding of the specific merits of advanced visualization techniques and their potential contributions must be developed.As a step towards integrating visualizations into an improved public planning paradigm termed Structured Public Involvement (SPI), this paper investigates the utility and performance of three visualization modes, termed 2D, 3D and VR (Virtual Reality), for a case study highway in Central Kentucky.

Visualization scenarios were designed and engineered according to the principle of elemental decomposition.Using a combination …

Minimum Mean Square Error Spectral Peak Envelope Estimation For Automatic Vowel Classification, Jaishree Venugopal

Electrical & Computer Engineering Theses & Dissertations

Spectral feature computations continue to be a very difficult problem for accurate machine recognition of speech. In this work, which focuses on vowels, a new spectral peak envelope method for vowel classification is developed, based on a missing frequency components model of speech recognition. According to the missing frequency components model, vowel recognition depends only on the spectral (harmonic) peaks. Smoothing and interpolation of the spectra, performed in the standard cepstral analysis method commonly used in automatic speech recognition, actually loses valuable information and results in reduced recognition accuracy. The new method for feature extraction presented in this thesis is …

The Effect Of Multiple Pulses On Bacteria, Ramy El-Sayed Aly

Electrical & Computer Engineering Theses & Dissertations

Pulsed electric fields are widely used for bacterial decontamination of water and liquid food [I]. Depending on pulse amplitude and duration, a certain percentage of the bacteria suffer irreversible damage and, consequently, cell death. We have explored the effect of microsecond pulses of 13 kV/cm and 15 kV/cm electric field amplitude on the viability of Escherlchia coli. The pulse duration was varied from 4 μs to 32 μs, and the pulse number of 4 μs pulses from one to eight, Finally, the effect of separation between pulses was studied. The pulses were generated by means of a generator where …

Development And Proposed Implementation Of A Field Permeability Test For Asphalt Concrete, David L. Allen, David B. Schultz Jr., L. John Fleckenstein

Kentucky Transportation Center Research Report

Pavement drainage contributes greatly to long-term pavement performance. Pavements undergo surface, as well as subsurface, drainage during prolonged rain events. It is this subsurface drainage that is of concern in this study. In the advanced asphalt pavements of today, where a drainage layer may be incorporated to facilitate the movement of water out of the above overlying pavement layers, water can be a problem in areas with variable permeability. High permeability may also cause other problems related to drainage such as frost heave, stripping, asphalt emulsification, and water coming out of the pavement surface from deeper layers in the pavement …

State Road Fund Revenue Collection Processes: Differences And Opportunities Of Improved Efficiency, Robert J. Eger Iii, Merl M. Hackbart

Kentucky Transportation Center Research Report

Research regarding the administration and collection of road fund revenues has focused on gaining an understanding of the motivations for tax evasion, methods of evasion, and estimates of the magnitude of evasion for individual states. To our knowledge, little attention has been focused on the impact road fund collection, assessment, audit, and enforcement processes have on tax evasion. The purpose of this study is to review the current road fund assessment, collection, audit, and enforcement processes and procedures and to develop recommendations to improve the efficiency and effectiveness of the process.

Lessons From Roman Cement And Concrete, Norbert J. Delatte

Civil and Environmental Engineering Faculty Publications

Although masonry and lime mortars had been used for centuries by earlier civilizations, the Romans were the first to extensively use naturally occurring volcanic earth to make hydraulic cement. The volcanic powder named “pulvis puteolanis,” found near the town of Puteoli near Naples (now Pozzouli), was used to build magnificent structures. The use of this hydraulic cement in masonry and concrete greatly expanded civil engineering possibilities. The Roman engineer Vitruvius, writing in The Ten Books on Architecture, described the careful materials selection, proportioning, and workmanship that was critical to the performance of Roman concrete. Masonry and coarse and fine …

Kentucky Highway User Survey 2000, Ronald E. Langley

Kentucky Transportation Center Research Report

The purpose of this study was to continue the efforts begun in 1997 to monitor Kentucky public opinion regarding the quality of the highway system and also includes a portion to measure satisfaction with the current drivers’ license and registration renewal processes. Kentucky’s 2000 public opinion is compared to data collected since 1997 to gauge Kentucky’s progress over the past years, and is compared to the NQI 2000 Survey done on the national level to show how Kentuckians’ opinions compare to those nationwide.

Abnormal Cell Detection Using The Choquet Integral, R. Joe Stanley, James M. Keller, Charles William Caldwell, Paul D. Gader

Electrical and Computer Engineering Faculty Research & Creative Works

Automated Giemsa-banded chromosome image research has been largely restricted to classification schemes associated with isolated chromosomes within metaphase spreads. In normal human metaphase spreads, there are 46 chromosomes occurring in homologous pairs for the autosomal classes 1-22 and the X chromosome for females. Many genetic abnormalities are directly linked to structural and/or numerical aberrations of chromosomes within metaphase spreads. Cells with the Philadelphia chromosome contain an abnormal chromosome for class 9 and for class 22, leaving a single normal chromosome for each class. A data-driven homologue matching technique is applied to recognizing normal chromosomes from classes 9 and 22. Homologue …

Determining United States Construction Management Aspects To Be Introduced To Construction Management Education In China, Jun Liu

Master of Technology Management Plan II Graduate Projects

The following study describes the current status of China's Construction Industry, highlights its educational system, and identifies the main constraints that restrain the construction industry from assuming a more effective and efficient role in China's impressive economic development.

This study outlines the problems existing in China's construction educational system. Through analyzing United States construction management education, and comparing it with China's construction education, the advantages of the United States construction management education are determined, and recommendations are made to improve China's construction education.

Pulsed Electron Heating Of Atmospheric Pressure Air Glow Discharges, Hisham Merhi

Electrical & Computer Engineering Theses & Dissertations

By applying electric field pulses of short duration (compared to the time constant for glow-to-arc transitions) to a weakly ionized gas, the electron energy distribution can be temporarily shifted to higher energies. This effect causes a nonlinear increase in the ionization rate and consequently a larger electron decay time. This effect has been demonstrated using single pulse operation.³ In order to generate plasma with semi-continuous electron density, repetitive operation is required. As a first step towards repetitive pulsed electric field operation, the temporal development of the voltage across the plasma for two subsequent pulses was measured. The dual pulse …

Guide To Revenue Calculations: Local Option Highway User Tax, Jon D. Fricker

Indiana Local Technical Assistance Program (LTAP) Publications

This guide is provided to explain the output generated by the computer programs, and to suggest ways in which the results can be adapted to specific LOHUT proposals before a County Council. Indiana LTAP neither endorses nor opposes passage of a LOHUT. The revenue projections it provides are intended to be an aid to well-informed decision-making on the part of a county’s citizens and its County Council.

Low Frequency Noise In Gan Metal Semiconductor And Metal Oxide Semiconductor Field Effect Transistors, S. L. Rumyantsev, N. Pala, M. S. Shur, R. Gaska, M. E. Levinshtein, M. Asif Khan, Grigory Simin, X. Hu, J. Yang

Faculty Publications

The low frequency noise in GaNfield effect transistors has been studied as function of drain and gate biases. The noise dependence on the gate bias points out to the bulk origin of the low frequency noise. The Hooge parameter is found to be around 2×10⁻³ to 3×10⁻³.Temperature dependence of the noise reveals a weak contribution of generation–recombination noise at elevated temperatures.

Fuel-Saving Strategies For Dual Spacecraft Interferometry Missions, Christopher A. Bailey, Timothy W. Mclain, Randal W. Beard

Faculty Publications

Separated spacecraft interferometry missions will require that spacecraft move in a coordinated fashion to ensure minimal and balanced consumption of fuel. This paper develops strategies for determining interferometry mission plans that result in significant fuel savings over standard approaches. Simulation results demonstrate that valuable reductions in fuel consumption can be realized by combining the retargeting and imaging maneuvers required to image multiple stellar sources. Fuel-optimal imaging strategies have been developed for two-spacecraft interferometry missions similar to the proposed StarLight mission using chained local optimization methods. Based on these strategies, sampling-pattern guidelines for space-borne interferometry missions have been developed.

Co-Located Fiber Bragg Gratings For Simultaneous Measurement Of Temperature And Strain, Ronald W. Bentley

Electrical & Computer Engineering Theses & Dissertations

Fiber Bragg gratings are periodic modulations of the refractive index of the fiber core exhibiting strong reflection at specific wavelengths determined by the periodicity and magnitude of the index modulation. Due to elastic and thermo optic properties of glass, the Bragg wavelength is sensitive to temperature and axial strain. The inability to discriminate between the effects of temperature and strain on fiber Bragg gratings, however, limits their use in sensing applications. Several schemes have been proposed to overcome this problem, and one involving a dual wavelength Bragg grating sensor implemented with co-located 850 nm and 1550 nm gratings is investigated. …

Simulation Optimization Studies Of Routing And Process Flow Problems, Satish Ravichandran

Electrical & Computer Engineering Theses & Dissertations

Computer aided simulation is emerging as a powerful tool for numerical analysis and in conducting performance evaluations of complex systems that depend on a multitude of variables. The primary objective in such simulation studies is to gauge the performance of the system under a various constraints and operating conditions. The effects of changing the operating parameter space can thus be analyzed without having to implement costly changes. Simulations are also carried out for the baseline scenarios to verity and validate the basic underlying system model. In this thesis research, two practical problems were studied through numerical modeling, and optimized solutions …

Optimal Aeroelastic Vehicle Sensor Placement For Root Migration Flight Control Applications, Abdul Ghafoor Al-Shenhabi

Mechanical & Aerospace Engineering Theses & Dissertations

An important step in control design for elastic systems is the determination of the number and location of control system components, namely sensors. The number and placement of sensors can be critical to the robust functioning of active control systems, especially when the system of interest is a large high-speed aeroelastic vehicle. The position of the sensors affects not only system stability, but also the performance of the closed-loop system. In this dissertation, a new approach for sensor placement in the integrated rigid and vibrational control of flexible aircraft structures is developed. Traditional rigid-body augmentation objectives are addressed indirectly through …

Highway Rock Slope Management Program, Tommy C. Hopkins, Tony L. Beckham, Liecheng Sun, Bixian Ni, Barry Butcher

Kentucky Transportation Center Research Report

Development of a comprehensive geotechnical database for risk management of highway rock slope problems is described. Computer software selected to program the client/server application in windows’ environment, components and structure of the geotechnical database, and some of the primary factors considered in constructing the database are discussed. In the establishment of a large database that will be used widely, it is extremely important to select development software that will allow simultaneous use of the database by numerous users. Major integrated components of the database include rock slope, landslide, and soil and rock engineering data. This report mainly focuses on the …

Resilient Modulus Of Kentucky Soils, Tommy C. Hopkins, Tony L. Beckham, Charlie Sun, Bixian Ni

Kentucky Transportation Center Research Report

In recent years, the American Association of State Highway Transportation Officials (AASHTO) has recommended the use of resilient modulus for characterizing highway materials for pavement design. This recommendation evolved as of a result of a trend in pavement design of using mechanistic models, which are based on the theory of elasticity (layered elastic analysis) or linear and non-linear, finite elements (and finite difference methods), or a combination of both of those theoretical approaches. Although much progress has been made in recent years in developing mathematical, mechanistic pavement design models, results obtained from those models are only as good as the …

Production Of Biogas From Water Hyacinth: Effect Of Substrate Loading In Semi-Batch & Batch Operations, J Katima

Tanzania Journal of Engineering and Technology (TJET)

A study was carried out to establish the effect of substrate loading rate on the production of biogas from water hyacinth. The experiments revealed that the maximum methane yield in a batch process was 0.166 normal litre (NLVg Of volatile solids (VS) added at substrate concentration of 25 g dry mass'litre after five days of incubation. The maximum methane yield in a semi-batch process was 0.153 NWg VS added at 1.30 g VS'litre day and retention time Of 15 days.

Efeci's In Reinforced Concrete Due To Environmental Conditions, And Concrete Treatment: A Case Study At The University Of Dar Es Salaam, I Rubaratuka

Tanzania Journal of Engineering and Technology (TJET)

Concrete is produced by mixing together cement, water and aggregates (i. e. sand and coarse aggregates) in specified proportions, It can do well with compressive forces but it is very weak under tensile forces. TO Overcome this problem, steel reinforcement are normally added to produce reinforced concrete which can also withstand tensile forces Experience shows that environmental conditions may have a negative impact On the durability of reinforced concrete structures resulting in development of defects if not properly assessed and appropriate measures adopted to arrest the same at the design and construction stages. The severity of damages for the investigated …