Engineering Commons^™

Experimental Geometry Optimization Techniques For Multi-Element Airfoils, Drew Landman

Mechanical & Aerospace Engineering Theses & Dissertations

A study is reported on geometry optimization techniques for high-lift airfoils. A modern three-element airfoil model with a remotely actuated flap was designed, tested, and used in wind tunnel experiments to investigate optimum flap positioning based on lift. All the results presented were obtained in the Old Dominion University low-speed wind tunnel. Detailed results for lift coefficient versus flap vertical and horizontal position are presented for two airfoil angles-of-attack: 8 and 14 degrees. Three automated optimization simulations, the method of steepest ascent and two variants of the sequential simplex method, were demonstrated using experimental data. An on-line optimizer was demonstrated …

Inversion And Analysis Of Remotely Sensed Atmospheric Water Vapor Measurements At 940nm, Jack Cutler Larsen

Mechanical & Aerospace Engineering Theses & Dissertations

The understanding and acceptance of remotely sensed atmospheric data depends strongly on the steps taken to characterize experiment error and validate observations through comparisons to other independent measurements. A formal error analysis of the Stratospheric Aerosol and Gas Experiment II (SAGE II) water vapor operational inversion algorithm is performed and compared to previous results. Random measurement errors were characterized by segmented least-squares profile fitting of the slant path absorption which found the error to be uncorrelated in the stratosphere with estimated variances significantly smaller than expected from 18-30 km. Estimates of null space error were developed from radiosonde hygrometers in …

Sparse Equation-Eigen Solvers For Symmetric/Unsymmetric Positive-Negative-Indefinite Matrices With Finite Element And Linear Programming Applications, Hakakizumwami Birali Runesha

Civil & Environmental Engineering Theses & Dissertations

Vectorized sparse solvers for direct solutions of positive-negative-indefinite symmetric systems of linear equations and eigen-equations are developed. Sparse storage schemes, re-ordering, symbolic factorization and numerical factorization algorithms are discussed. Loop unrolling techniques are also incorporated in the coding to enhance the vector speed. In the indefinite solver, which employs various pivoting strategies, a simple rotation matrix is introduced to simplify the computer implementation. Efficient usage of the incore memory is accomplished by the proposed "restart memory management" schemes. A sparse version of the Interior Point Method, IPM, has also been implemented that incorporates the developed indefinite sparse solver for linear …

Touch The Wind, Tim Brady

Publications

Historical background on the development of flight navigational instruments based on discoveries made by Lt. James H. Doolittle.

Pavement Thickness Evaluation By Gpr Survey In Idaho, Joseph C. Sener, Robert M. Smith, Michael D. Garz, George A. Murgel, Robert W. Hamilton, David R. Haws

Civil Engineering Faculty Publications and Presentations

In 1995 and 1996, the Idaho Transportation Department (lTD) conducted a series of ground-penetrating radar (GPR) surveys as a nondestructive testing (NDT) method to evaluate the thickness of asphalt and Portland cement concrete (AC/PCC) pavements in Idaho. GPR surveys employed both air-coupled and combination air and ground coupled systems with their associated equipment and software. A total of 30 miles of AC/PCC pavements were evaluated by GPR surveys. The results obtained were correlated with the site-specific ground-truth data from borings.

Knowledge of pavement layer thickness is needed to predict pavement performance, establish load carrying capacities and develop maintenance and rehabilitation …

A Review On The Documentation For The South Florida Water Management Model (Sfwmm), Daniel P. Loucks, Wendy D. Graham, Conrad D. Heatwole, John W. Labadie, Richard C. Peralta

Civil and Environmental Engineering Faculty Publications

Early in February 1998, the South Florida Water Management District asked Professors Wendy D. Graham, Comad D. Heatwole, John W. Labadie, Daniel P. Loucks, and Richard C. Peralta to serve on a panel to

• Review the Draft Documentation for the South Florida Water Management Model (SFWMM),

• Develop a series of questions, issues and areas for discussion during a site visit,

• Visit the District for a model familiarization session, and

• Prepare and submit a written evaluation of the model, with emphasis on the documentation that will include criticisms, specific recommendations for improvement, and responses to questions posed.

Tooth Contact Sensing Apparatus And Method, John D. Summer, Edmund Pierzchala, Marek Perkowski

Electrical and Computer Engineering Faculty Publications and Presentations

An apparatus and method for sensing tooth contact includes at least one, and more typically plural, vibration sensors which are coupled to the non-biting surfaces of teeth. These sensors produce output signals when the associated teeth contact one another during jaw closing, the output signals being processed to provide information concerning tooth contact. For example, information concerning the ?rst tooth which contacts may be determined, the sequence of contact by various teeth may be determined, as well as the time between contact of the various teeth. Other information concerning tooth contact may also be determined and dis played in a …

The Future Interface Of Political And Industrial/Organizational Psychologies: The Case Of Air Traffic Controllers, Ibpp Editor

International Bulletin of Political Psychology

This article presents a brief overview of future psychological challenges bearing on the improving the performance of air traffic controllers. The most significant challenges appear to be philosophical, political, social, and cultural.

Ellipsometric Determination Of Optical Constants For Silicon And Thermally Grown Silicon Dioxide Via A Multi-Sample, Multi-Wavelength, Multi-Angle Investigation, C. M. Herzinger, B. Johs, W. A. Mcgahan, John A. Woollam, W. Paulson

Department of Electrical and Computer Engineering: Faculty Publications

Optical constant spectra for silicon and thermally grown silicon dioxide have been simultaneously determined using variable angle of incidence spectroscopic ellipsometry from 0.75 to 6.5 eV. Spectroscopic ellipsometric data sets acquired at multiple angles of incidence from seven samples with oxide thicknesses from 2 to 350 nm were analyzed using a self-contained multi-sample technique to obtain Kramers–Kronig consistent optical constant spectra. The investigation used a systematic approach utilizing optical models of increasing complexity in order to investigate the need for fitting the thermal SiO₂ optical constants and including an interface layer between the silicon and SiO₂ in modeling …

Effective Recruiting Methods For Four-Year Baccalaureate Industrial Technology Programs, Steven C. Spicher

Graduate Research Papers

The purpose of this study was to identify recruiting methods that might be utilized to increase student enrollment in four-year baccalaureate industrial technology programs in Iowa. The recruiting methods identified as effective may be used to increase the number of students enrolled in and graduating from four-year baccalaureate industrial technology programs in Iowa and surrounding states.

Parallel Implementation Of An Artificial Neural Network Integrated Feature And Architecture Selection Algorithm, Craig W. Rizzo

Theses and Dissertations

The selection of salient features and an appropriate hidden layer architecture contributes significantly to the performance of a neural network. A number of metrics and methodologies exist for estimating these parameters. This research builds on recent efforts to integrate feature and architecture selection for the multilayer perceptron. In the first stage of work a current algorithm is developed in a parallel environment, significantly improving its efficiency and utility. In the second stage, improvements to the algorithm are proposed. With regards to feature selection, a common random number (CRN) addition is proposed. Two new methods of architecture selection are examined, to …

The Application Of Statistical Sampling Techniques To The Operational Readiness Inspection, Troy L. Dixon, Timothy S. Madgett

Theses and Dissertations

A Blue Ribbon Commission report to the Air Force Chief of Staff in February 1997 makes several specific recommendations on the conduct of Operational Readiness Inspections. This thesis develops a solution to one of the recommendations of that report; utilize scientifically based sampling techniques to reduce the footprint of the inspection on an evaluated unit. Acceptance sampling, common in industry, is developed for use in the environment of the Operational Readiness Inspection. The time saved from this more efficient sampling practice reduces Inspector General time at an evaluation, decreases the footprint, and answers the specific recommendations of the Blue Ribbon …

Nebraska Tractor Test Useumcommittee Minutes March 10, 1998, Tractor Museum

Lester F. Larsen Tractor Museum: Planning and Development Documents

Hitchcock Foundation Big Red Collectors Dedication of Museum

Disclaimer And Acknowledgments, University Of Missouri - Rolla

International Conference on Case Histories in Geotechnical Engineering

No abstract provided.

Past Proceedings: Fourth International Conference On Case Histories In Geotechnical Engineering, St. Louis (1998), Multiple Authors

International Conferences on Recent Advances in Geotechnical Earthquake Engineering and Soil Dynamics

No abstract provided.

Meet The Speakers, Multiple People

International Conference on Case Histories in Geotechnical Engineering

No abstract provided.

Preface, Shamsher Prakash

International Conference on Case Histories in Geotechnical Engineering

No abstract provided.

Fourth International Conference On Case Histories In Geotechnical Engineering, Multiple Authors

International Conference on Case Histories in Geotechnical Engineering

No abstract provided.

Authors Index, Multiple Authors

International Conference on Case Histories in Geotechnical Engineering

No abstract provided.

Meet Our Authors, Multiple Authors

International Conference on Case Histories in Geotechnical Engineering

No abstract provided.

Organizing Committee, Multiple Members

International Conference on Case Histories in Geotechnical Engineering

No abstract provided.

Exhibitors, Multiple People

International Conference on Case Histories in Geotechnical Engineering

No abstract provided.

Participant List, Multiple Participants

International Conference on Case Histories in Geotechnical Engineering

No abstract provided.

Past Proceedings: First International Conference On Case Histories In Geotechnical Engineering (1984), Multiple Authors

International Conference on Case Histories in Geotechnical Engineering

No abstract provided.

Past Proceedings: Second International Conference On Case Histories In Geotechnical Engineering (1988), Multiple Authors

International Conference on Case Histories in Geotechnical Engineering

No abstract provided.

List Of Sessions, Multiple Authors

International Conference on Case Histories in Geotechnical Engineering

No abstract provided.

Estimating Post-Liquefaction Displacements In Embankment Dams And Priorities Remediation Measures, W. D. Liam Finn

International Conference on Case Histories in Geotechnical Engineering

Large displacement analysis is used to simulate the failures of flood protection dikes in Hokkaido, Japan, which occurred during the 1993 Kushiro-oki earthquake. These studies served to validate the method of analysis. The analysis was then used to predict displacements in dikes with potential for liquefaction by relating displacements to geometric characteristics of the dikes: height, slopes, and thickness of potentially liquefiable layer. The predictions were verified using dike displacement data from the Nansei-oki earthquake of 1994. The basis for reliable post-liquefaction analysis is a good estimate of the residual strength of the liquefied soils. For this reason, recent developments …

Foundation Design And Performance Of The World's Tallest Building, Petronas Towers, Clyde N. Baker Jr., Elliott Drumright, Leonard M. Joseph, Ir. Tarique Azam

International Conference on Case Histories in Geotechnical Engineering

The analysis and design of foundations for the World's Tallest Building are described. The results of the exploration and in-situ testing program required to define the foundation support conditions are presented. The Towers are supported on a mat foundation on barrettes in residual soil and weathered silt stone, sandstone formation overlying karstic limestone at depths ranging from 80 to more than 200 meters. The extensive grouting program required to fill major cavities in the limestone beneath the Tower mats is described. The settlement analysis performed utilizing modulus information developed from the in-situ testing program is outlined. Barrette lengths were varied …

O-Cell Testings Case Histories Demonstrate The Importance Of Bored Pile (Drilled Shaft) Construction Technique, John H. Schmertmann, John A. Hayes, Thomas Molnit, Lorj O. Osterberg

International Conference on Case Histories in Geotechnical Engineering

Herein we review the Osterberg Cell, or O-cell, method for performing large capacity load tests on bored piles (drilled shafts), and demonstrate how it provides a new opportunity to assess the effects of construction technique. A sampling of 8 case histories, 7 with comparative testing, illustrates the impact of poor technique and thus demonstrates the importance of good construction technique. The poor techniques include inadequate bottom cleanout, failure to use drilling fluids, poor concrete placement, failure to roughen sides, and improper drilling tools. We conclude with a brief description of a recent, world record, 133 MN (15,000 tons) O-cell load …

A Recent Difficult Foundation Problem: The Case Of The New Tagus Bridge, Pedro Simão Sêco E Pinto, Ricardo Oliveira

International Conference on Case Histories in Geotechnical Engineering

A brief description of the New Tagus Bridge is presented. The main site geological conditions and the field and laboratory tests are described. The seismic studies related to the design spectra, the liquefaction potential assessment and the seismic pile analysis are presented. The pile load tests (both static and dynamic) carried out on trial piles are described. The objectives of reception tests for piles and monitoring during the construction phase and the long term are presented.