Engineering Commons^™

Computation Of Planar Store Trajectories Using An Adaptive Grid Procedure, William D. Hack

Theses and Dissertations

The objective of this research was to compare a quasi-analytical, potential flow/three-degree-of-freedom model to an implicit-Euler algorithm for the calculation of store trajectories. The implicity algorithm uses a cell- centered, finite-volume, spatial discretization applied to the Euler equations, written in time-dependent, curvilinear-coordinates. A flux-differencing Roe scheme is employed to find the split-fluxes and the Steger/Warming flux-vector method is used to calculate the flux-Jacobians. The potential flow and implicit- Euler algorithm are combined with a three-degree-of-freedom algorithm to evaluate the planar, freefall trajectories of a simple store shape. The research uses two different grid-modification techniques in the implicit algorithm evaluation. Data …

Tensile Strength Characterization Of A Metal Matrix Composite With Circular Holes, Jeffrey Rattray

Theses and Dissertations

Static tensile testing conducted at room temperature and 650 C shows notch sensitivity for a quasi-isotropic lay-up of a titanium alloy metal matrix composite. The specific material used was SCS-6/Beta 21S. Some unnotched specimens were tested and then the diameter-to-width ratio was varied from 0.1 to 0.4. The room temperature unnotched strength is 840 MPa, and the strength falls to less than half this value at 650 C. The off-axis plies of the (0, + or - 45, 90)s lay-up exhibit debonding of the fibers from the matrix at only ten percent of failure stress. This debonding is shown with …

The Use Of A Higher Order Kinematic Relationship On The Analysis Of Cylindrical Composite Panels, Kathleen V. Tighe

Theses and Dissertations

An analytical study was performed to determine the critical buckling loads and natural frequencies for composite cylindrical shells, including transverse shear effects and constant through the thickness direct strain ε_z. A linearized form of Sanders shell equations are derived, including a parabolic transverse shear strain distribution. Higher order laminate constitutive relations are developed. Hamilton's Principle is applied to derive five partial differential equations of motion and the associated boundary conditions, which are then solved using the Galerkin technique. Ply layups of (0/90), (45/-45), and (0/45/-45/90) were investigated under three boundary conditions, simply supported, clamped, and a combination simple- …

A Comparison Of Fractional Order Time Derivative Models Of The Viscoelastic Stress Relations In Thermorheologically Complex Materials, Victor B. Chambers

Theses and Dissertations

The purpose of this thesis was to examine the viscoelastic behavior of thermorheologically complex materials, a typical example of which is a soft, rubbery material. Materials such as these are very useful in damping vibrations in structures, but the relaxation moduli of these materials change significantly with temperature and frequency. In the case of space structures applications where temperatures vary greatly and a stable platform is necessary, a method to predict this changing modulus is needed. The original approach was to validate a previously developed viscoelastic model, but the task expanded to include extending the model to materials with two …

Application Of Finite Element Modeling And Analysis To The Design Of Positive Pressure Oxygen Masks, Bruce H. Bitterman

Theses and Dissertations

This study investigated tools and techniques for performing finite element analysis of the MBU-20/P pilot's oxygen mask. The problem which was investigated was the fit of the mask to the face at Positive Pressure Breathing (PPB) pressures. Deformed geometry of the mask and reaction forces on the face were calculated to provide a measure of the fit. The MBU-20/P mask was first digitized by 3-D digitizer. A computer program was written to translate the digitized coordinate data to a finite element format for two commercial packages. The packages targeted were SDRC I-DEAS and PDA PATRAN. Other supplementary programs were written …

Navigation Of A Satellite Cluster With Realistic Dynamics, J. Timothy Middendorf

Theses and Dissertations

Previous work in the area of estimation of relative positions within a satellite cluster showed favorable results. However, the work was done using point mass orbits in the truth model. This thesis investigates the estimation of relative satellite positions operating in near circular orbit including the J₂ term in Earth's geopotential. The iterated, extended Kalman filter is used as the on-board estimator in order to gain better performance in the face of the non-linearities. The dynamics in the estimator are based on the Clohessy- Wiltshire equations for relative orbital motion. Inputs to the host estimator are range measurements from …

Perturbation Theory For Restricted Three-Body Orbits, David A. Ross

Theses and Dissertations

A perturbation theory for restricted three-body orbits, using a periodic trajectory as a reference solution, is investigated. The nearly- periodic equations of motions are derived by analogy to a linearization about an equilibrium point. In this case, the linearization produces a set of time- periodic equations of motion that, according to Floquet, are completely solved by a periodic trajectory. The four-dimensional phase space of the restricted three-body problem is the first surveyed for regions of periodic motion, via the surface of section phase plot. Upon extraction of a periodic orbit, nearly- periodic orbits are integrated. The integrated state vector is …

Thrust Vector Control Of An Overexpanded Supersonic Nozzle Using Pin Insertion And Rotating Airfoils, Curtis R. Amble

Theses and Dissertations

An experimental study of probe thrust vector control of overexpanded supersonic flow in nozzles using movable probes as the vectoring mechanism is presented. Two type of movable probes were used. The first inserted cylindrical proves through the wall of the nozzle to set depths relative to the nozzle wall; the second used rotating airfoils, inserted within the nozzle flow, rotated to various angles of attack relative to the nozzle centerline. Effectiveness of these probe thrust vector control mechanisms was investigated for a confined jet and conical nozzle. The study objective was to evaluate performance and transient characteristics of these probe …

Effect Of Nonuniform Entrance Flow Profile On Hypersonic Nozzle Pitching Moment, Sandra L. Snelling

Theses and Dissertations

The Scramjet Hypersonic Nozzle (SCHNOZ) parabolized Navier-Stokes computer code was used to model turbulent, chemically reacting flow present in a hypersonic nozzle. Two nozzle configurations were considered, an isolated nozzle (no external flow) and a nozzle with a finite length cowl. A single nonuniform entrance flow profile was generated and an equivalent uniform flow profile calculated for input into the nozzle code. Uniform and nonuniform cases for each nozzle were run using both frozen and finite rate chemistry. An increased grid resolution in the computer code was necessary to eliminate numerically induced anomalies in the results of the nonuniform cases …

The Application Of Statistical Estimation Techniques To Terrain Modeling, Donald P. Duckett Jr.

Theses and Dissertations

This thesis researches methods of generating accurate and realistic polygonal terrain models by reducing gridded sampled terrain elevation data such as DMA DTED. The terrain models generated should be applicable for use in flight simulators and other systems. Existing methods of terrain modeling are discussed, and limitations of these systems are presented. The geostatistical estimation technique known as kriging is presented as a method estimating terrain elevations at locations not provided in DMA DTED or other gridded terrain elevation data. Kriging is an optimal interpolation method based on statistical analysis of the data. It also provides a measure of accuracy, …

A Standardized Software Reliability Measurement Methodology, Joseph J. Stanko

Theses and Dissertations

Current Air Force practice is to perform Operational Test and Evaluation (OT and E) for each new weapons system. In support of this, Headquarters Air Force Operational Test and Evaluation Center (HQ AFOTEC) is responsible for measuring both suitability and effectiveness. While suitability is adequately measured, the current effort only addresses hardware effectiveness, or at best, system effectiveness. Since tools and metrics are in place for software suitability assessments related to OT and E (for example, software maintainability), there should be some effective way of measuring the operational effectiveness of software. Currently, HQ AFOTEC/LG5 has a data collection tool for …

Evaluation Of Scalar Value Estimation Techniques For 3d Medical Imaging, Rob W. Parrott

Theses and Dissertations

Scalar value estimation in 3D medical imaging increases data resolution for enhanced renditions and corrects inaccurate surface formations. Accurate estimations are vital because clinical assessment is often aided by examination of 3D medical images. This thesis explores different estimation techniques and introduces the geostatistical estimation technique called kriging to the field of 3D imaging. Kriging theory claims to be the optimal estimator-- better than the standard deterministic methods commonly used. The techniques investigated are linear interpolation, trilinear interpolation, tricubic interpolation, and kriging. This research investigates scalar value estimation in the volume pre-processing operation of slice interpolation and in a surface …

Wave Propagation In A Randomly Inhomogeneous Medium - A Study Of The Problem, Kyle Hunter

Theses and Dissertations

The problem of calculating the scintillation index of an atmospherically propagating spherical wave is examined. The fourth statistical moment of the complex field is obtained by using Feynman (path) integral techniques applied to the stochastic parabolic equation. The general trajectory of each Feynman integral is approximated by a truncated Fourier-sine series and the infinite-fold integration of the Feynman integral is reduced to a three-fold Riemann integral which is shown to match results derived under different assumptions. This thesis is highly tutorial.

Kalman Filter Tracking Of A Reflective Target Using Forward Looking Infrared And Doppler Return Measurements, Theodore D. Herrera

Theses and Dissertations

Plume phenomenology experiments conducted in 1990 uncovered the existence of plume speckle reflectance emanating from the exhaust of a solid- propellant rocket motor due to the presence of metallic particulates in the plume. This impeded attempts, that are dependent upon the speckle return of an actively illuminated target hardbody, to discern the plume/hardbody interface. This thesis investigates the feasibility of employing the Doppler return phenomenon in discerning the plume/hardbody interface and locating the hardbody center-of-mass. The potential of the Doppler phenomenon's utilization lies in the fact that the Doppler return frequency spectra of the plume and the hardbody respectively possess …

Infrared Target Recognition, Brian D. Singstock

Theses and Dissertations

In this thesis, three approaches were used for Automatic Target Recognition (ATR). These approaches were shape, moment and Fourier generated features, Karhunen-Loeve transform (KLT) generated features and Discrete Cosine Transform (DCT) generated features. The KLT approach was modelled after the face recognition research by Suarez, AFIT, and Turk and Pentland, MIT. A KLT is taken of a reduced covariance matrix, composed all three classes of targets, and the resulting eigenimages are used to reconstruct the original images. The reconstruction coefficients for each original image are found by taking the dot product of the original image with each eigenimage. These reconstruction …

Image Analysis Using Gabor Transforms: Correlated With Human Saccadic Movement Data To Identify The Human Visual Search Strategy, Ralph J. St John

Theses and Dissertations

This thesis investigated whether a relationship exists between the Gabor Correlation Coefficient (GCC) magnitudes of fixation points for a set of images viewed by six subjects and the human visual search strategy. A couple of different relationships were investigated. First, the data were analyzed to determine if the GCC magnitudes of human fixation points predicted the time ordered sequence of human fixation points during the performance of a visual search. Second, the data were analyzed to determine if there was a significant difference between the GCC magnitudes of the human fixation points and the GCC magnitudes of a random set …

Optical Image Segmentation Using Wavelet Correlation, Steven D. Pinski

Theses and Dissertations

This research introduces an optical method of segmenting potential targets using wavelet analysis. Implementation of an optical Harr wavelet is fulfilled using a magneto-optic spatial light modulator (MOSLM). Two methods of controlling wavelet dilation are explored: (1) spatial filtering of a ternary modulated MOSLM; (2) a single aperture positioned in front of a binary modulated MOSLM. Segmentation is performed through Vander Lugt correlation of a binarized image with a binarized optical wavelet. Three different image binarization methods are investigated for use in the correlation scheme: (1) average pixel value over an entire scene; (2) localized 4 x 4 pixel average …

An Investigation Of The Application Of Artificial Neural Networks To Adaptive Optics Imaging Systems, Andrew H. Suzuki

Theses and Dissertations

Recurrent and feedforward artificial neural networks are developed as wavefront reconstructors. The recurrent neural network studied is the Hopfield neural network and the feedforward neural network studied is the single layer perceptron artificial neural network. The recurrent artificial neural network input features are the wavefront sensor slope outputs and neighboring actuator feedback commands. The feedforward artificial neural network input features are just the wavefront sensor slope outputs. Both artificial neural networks use their inputs to calculate deformable mirror actuator commands. The effects of training are examined.

A Topographical Analysis Of The Human Electroencephalogram For Patterns In The Development Of Motion Sickness, George S. Vogen

Theses and Dissertations

A topographical analysis was performed on 12 electroencephalograms (EEGs) collected from 10 volunteers who experienced motion sickness through cross-coupled Coriolis stimulation. Seven males and three females participated in the research conducted at the Air Force Institute of Technology, Wright- Patterson AFB. Two male volunteers participated in double-blind placebo/ phenytoin trials. Static brain maps and dynamic EEGs which focused on delta (below 3Hz) activity during the development of motion sickness revealed a seizure-like propagation pattern. With initial symptoms, a clear left parietal focus was seen in all records. A less dominant left fronto-temporal focus was present in 11 of the 12 …

Analysis Of Orbital Elements And Atmospheric Activity To Ascertain Possible Presence Of An Ion Propulsion Capability Aboard Salyut 7/Cosmos 1686, Kris R. Howard

Theses and Dissertations

The purpose of this study was to analyze solar and geomagnetic activity in concert with orbital element data for the Soviet space station Salyut 7 as a means toward a determination of the possible use of an ion propulsion source aboard Salyut 7 and the Cosmos 1686 module to which it was docked. Solar activity was represented by sunspot number and 10.7-cm solar radio flux, and geomagnetic activity was represented by the general activity indices k_p and A_p. The effects of atmospheric activity were examined both by direct comparison with orbital data, and by using solar and …

An Expert System For The Civil Engineering In-Service Work Plan, Philip W. Melancon

Theses and Dissertations

Civil Engineering managers make many decisions each day which could be aided using expert system technology. One of the most important decision processes affecting CE operations is the scheduling of work order to be accomplished each month. A good work order schedule, or In-Service Work Plan (IWP), can ensure that material and manpower resources are fully utilized, that base facilities are properly maintained, and that customers are satisfied. The purpose of this research was to build and test a PC-based prototype expert system to schedule the IWP. Expanding on previous research, a multiplicative weighting technique was developed to provide relative …

Thermomechanical Fatigue Of Scs-6/Β21-S [0/90]2s Composite, Dana G. Hanson

Theses and Dissertations

The objective of this study was to investigate the material behavior of SCS-6/β21-S [0/90]_2s in a thermomechanical fatigue environment. Samples of the SCS-6/β21-S composite were subjected to in-phase and out-of-phase cyclic loading; four samples were tested under in-phase conditions and eight samples were tested under out-of-phase conditions. Stress, temperature, and total strain values were acquired during the test sequence and analyzed for indication of possible trends. Experimental results indicated in-phase specimen possessed shorter fatigue lives then their out-of-phase counterparts above the static first ply failure of the matrix. The out-of-phase specimen showed a shorter fatigue life below the first …

Test 1656: Ford 5640 (16x4) Diesel 16-Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF THE TEST PROCEDURE General Tractors are tested at the University of Nebraska according to the Agricultural Tractor Test Code approved by the American Society of Agricultural Engineers and the Society of Automotive Engineers or official Nebraska test procedure. The manufacturer selects the tractor to be tested and certifies that it is a stock model. Each tractor is equipped with the common power consuming accessories such as power steering, power lift pump, generator, etc., if available. Power consuming accessories may be disconnected only when the means for disconnecting can be reached from the operating station. An official representative of …

Development Of An Advisory System For Indoor Radon Mitigation, Patricia Hiromi Byrne

Dissertations and Theses

A prototype hybrid knowledge-based advisory system for indoor radon mitigation has been developed to assist Pacific Northwest mitigators in the selection and design of mitigation systems for existing homes. The advisory system employs a heuristic inferencing strategy to determine which mitigation techniques are applicable, and applies procedural methods to perform the fan selection and cost estimation for particular techniques. The rule base has been developed employing knowledge in existing publications on radon mitigation. Additional knowledge has been provided by field experts. The benefits of such an advisory system include uniform record-keeping and consistent computations for the user, and verification of …

Back-Contact Vertical-Junction Solar Cell And Method, Michael W. Carver, Edward S. Kolesar Jr.

AFIT Patents

An interdigitated back-contact vertical-junction solar cell which utilizes an anisotropically etched 110-oriented silicon crystal wafer. The cell structure includes rounded corner top edges of the between cell channel walls in order to improve light capturing ability and also has pn-junctions disposed over all of the cavity internal surfaces. Additional pn-junctions are located on the rear surface of the cell array to assist in generated carrier collection into a rear mounted metallic conductor grid. The disclosed cell has desirable transducer efficiency, without the use of anti-reflection coatings, and previous improved physical robustness, and radiation hardening. Fabrication of the cell array includes …

Electrical Characterization Of Metal‐Insulator‐Semiconductor Diodes Fabricated From Laser‐Ablated Yba2Cu3O7−Δ/Yttria‐Stabilized Zirconia Films On Si Substrates, Eric M. Ajimine, Felino E. Pagaduan, M. Mahmudur Rahman, Cary Y. Yang

Electrical and Computer Engineering

The purpose of this investigation is to study the electrical properties of the YBCO/YSZ/Si metal‐insulator‐semiconductor structure and the yttria‐stabilized zirconia (YSZ)/Si interface. The YBCO and YSZ layers were epitaxially grown in situ on Si by pulsed laser deposition. Current‐voltage measurements of devices fabricated on p‐type Si(100) showed a small leakage current density at 292 K, which decreased further at 80 K. Comparison of capacitance‐voltage measurements at 292 K for frequencies between 10 and 400 kHz showed a large variation of capacitance in the accumulation region demonstrating the presence of mobile ions in the YSZ layer. This variation is less pronounced …

Comparison Of Spice And Network C Simulation Models Using The Cam System, Wen-Tsung Yen

Dissertations and Theses

The performance of SPICE and Network C (NC) circuit simulator when simulating MOS transistor circuits has been investigated and compared. SPICE analog model, NC analog model and NC MOS_PWL model are the three MOS transistor models being used. The comparison between SPICE and NC includes five areas. They are MOS transistor model, circuit analysis and computational methods, limitation on the ability to simulate circuits containing the MOS transistor diode configuration, run time and the ability to build new circuit component models using derived equations.

The prototype circuit being used is the Content-Addressable Memory (CAM) circuit. The CAM circuit is a …

Room Temperature Wear Characteristics Of Al2O3-Particle-Reinforced Aluminum Alloy Composite, A. R. Nesarikar, Surendra N. Tewari, E. E. Graham

Chemical & Biomedical Engineering Faculty Publications

Room temperature dry wear and friction properties of a metal matrix composite sliding against cast iron have been studied in a pin-on-plate reciprocating wear tester. The composite consists of Al₂O₃ particles in an aluminum alloy matrix. Wear is caused by abrasion, interfacial adhesion and ploughing of the softer surface with the asperities of the harder surface and the debris. With increasing load the friction coefficient and wear initially increase and then ecrease. The decreases in wear and friction are caused by increased hardness resulting from re-embedding of the fractured Al₂O₃ particles near the surface …

Stochastic Hydrologic Modeling In Real Time Using A Deterministic Model (Streamflow Synthesis And Reservoir Regulation Model), Time Series Model, And Kalman Filter, Philip Kwok Fan Tang

Dissertations and Theses

The basic concepts of hydrologic forecasting using the Streamflow Synthesis And Reservoir Regulation Model of the U.S. Army Corps of Engineers, auto-regressive-moving-average time series models (including Greens' functions, inverse functions, auto covariance Functions, and model estimation algorithm), and the Kalman filter (including state space modeling, system uncertainty, and filter algorithm), were explored. A computational experiment was conducted in which the Kalman filter was applied to update Mehama local basin model (Mehama is a 227 sq. miles watershed located on the North Santiam River near Salem, Oregon.), a typical SSARR basin model, to streamflow measurements as they became available in simulated …

Solder/Polymer Composite Paste And Method, Ravi F. Saraf

Department of Chemical and Biomolecular Engineering: Patents

An improved solder/polymer fluxless composite paste interconnection material having a low reflow temperature to form electrical contacts having good bonding strength and low contact resistance. The present pastes comprise a major proportion of a meltable metal alloy powder filler, free of noble metals and preferably free of lead, a minor proportion of a solution of a temperature-stable thermoplastic polymer having a softening temperature above the melting temperature of the metal powder filler in a volatile solvent which evaporates during reflow, and a minor proportion of a fluxing agent having a boiling point lower than the reflow temperature of the composition …