Engineering Commons^™

Size And Shape Of Clay Grains As Affected By Various Methods Of Grinding, Henry William Meyer

Bachelors Theses

"It is a common belief among those persons manufacturing dry pressed brick that the shape of grain of the clay used for this purpose would materially affect the physical properties of the resultant product. Some believe that clays, dry pan-ground, give a better product than clays disintegrated mechanically or passed through rolls. In some recent dry press investigations it was found that some milling methods gave an advantage over other methods, in the matter of pressure transmission. Due to this, a possible cause for the advantage was attributed to the shape of the grains resulting from the various methods of …

The Commercial Value Of High Iron And High Alkalie Diaspore, William Lucius Mccracken

Bachelors Theses

"In a recent survey of the refractory field particularly regarding high iron and high alkali diaspore it was suggested that perhaps some of these impure clays had the proper flux content to make them a body of stable volume in the initial firing operation. At present there is an apparant sic lack of information regarding the commercial value of these impure diaspores. One of the great problems in the use of diaspore refractories is the lack of stability of volume while in service subjected to severe heat treatments of varying degrees"--page 3.

The Transmission Of Pressure In The Dry Pressing Of Typical Building Brick And Fire Brick Mixes As Affected By The Variation In Grog Size, Henry Rickel Herron

Bachelors Theses

"In the formation of dry pressed ware, the transmission of pressure is of vital importance to the quality and character of the finished product as regards the resistance to spalling, load at high temperatures, slag action, abrasion and other physical properties. Furthermore, the transmission of pressure is a limiting factor as regards the size and irregularity of shape of a product manufactured by the dry press process"--Introduction, page 1.

The Transmission Of Pressure In The Dry Pressing Of Typical Building Brick And Fire Brick Mixes As Affected By The Variation In Grog Size, Stanley John Tompach

Bachelors Theses

"In the formation of dry pressed ware, the transmission of pressure is of vital importance to the quality and character of the finished product as regards the resistance to spalling, load at high temperatures, slag action, abrasion and other physical properties. Furthermore, the transmission of pressure is a limiting factor as regards the size and irregularity of shape of a product manufactured by the dry press process. Prior to the time of this investigation several companies have succeeded in producing ware up to six (6) inches in depth; but an increase over six inches has resulted, in every case, in …

The Effect Of Small Amounts Of Chrome Ore On Dry Press Diaspore Refractories, Allen John Reid

Bachelors Theses

"The term "Diaspore" as used in this paper will be used to mean the diaspore clay from which refractory bodies are made. The pure mineral Diaspore (Al₂O₃ . H₂O) has an Al₂O₃ content of 85%, while the best grades of diaspore clay run from 76% to 79% diaspore. Diaspore clay consists of a varying percentage of diaspore, ranging from 60% to 79%, and the remaining percentage as clay. The most objectionable impurities which occure sic in diaspore clay are alkalies. The chief source of diaspore is the central part of Missouri. It occurs in pot hole formations accompanied by "flint" …

Pressure Transmission In Clays Affected By Time Of Pressure Application, Robert Edward Lee

Bachelors Theses

"Experienced dry-press operators have long known that when they slow down their presses, to the proper speed they are able to exert more pressure on a wetter mix with out pressure cracks becoming apparent. When a clay mix is compressed in a dry-press there is a gradation of the pressure exerted, from the rams to the center, causing in some cases a soft centered brick. "Shelly brick", are undersirable sic because they do not have uniform physical properties through out. This weakens their structure, due to unequal stresses developed in drying and fireing sic. The defective structure of dry-pressed brick …

Some Early Geologists And Their Work In Montana, John E. Blixt

Bachelors Theses and Reports, 1928 - 1970

This paper marks an increased refinement and more detailed accuracy in the description of the geological features of the state. It includes the recent studies of mineral deposits, of oil structures, of the formations of bedded rocks and their included fossils, carried on both by the Federal and State governments and by various interested private persons, such as the mining companies. It is within this period that the Federal Government encouraged the U. S. Geological Survey in the publication of monographs on the National Parks, papers of great popular interest and educational value making these beautiful regions comprehensible in their …

Age Relationships Of Ore Deposits Of Southwestern Montana (A Microscopic Study), Charles R. Trueworthy

Bachelors Theses and Reports, 1928 - 1970

Although considerable work has been undertaken by some prominent geologists, the best known of which is that of Paul Billingsley and J. A. Grimes', in investigating the ore deposits of the Boulder Batholith and surrounding area, there has not been any complete microscopic investigation of these deposits, as a whole, published in the literature. With this in mind it was suggested to the writer by Professor Paul A. Schafer, of the Montana School of Mines, that a microscopic study of the ores of this region would be a worthwhile geologic problem.

It was thought that the mineral association and the …

A Preliminary Study Of The Separation Of The Copper Sulfides From Sphalerite And The Effect Of Certain Reagents On Some Of The Pure Copper Minerals In Synthetic Mixtures, Gailen T. Vandel

Bachelors Theses and Reports, 1928 - 1970

The problem of separating the copper sulfide minerals from sphalerite, in copper - zinc ores, has been a difficult one. This is largely due to the lack of adequate research and the small amount of data obtainable on the behavior of copper and zinc sulfide minerals in flotation circuits.

Discrepencies Of Theory As Against Empirical Results Of Critical Speeds Of Circular Cross Sectioned Shafting, Vern Kilpatrick

Electronic Theses and Dissertations

The scope of this thesis included computations and tests showing the first critical speeds of two shafts each 5/8" dia x 38" long one of C.R.S. and one of hard drawn brass. The purpose was to find and tabulate the discrepancies between the computed values for the critical speeds and the empirical values for critical needs.

A Qualitative Study Of Arsine And Stibine Reactivity Toward Inorganic Salts In Certain Solvents, John Edgar Antener

Masters Theses

"The effects of arsine and stibine on some substances have been investigated by various workers and recorded without any attempt at systematic classification. In this work a more comprehensive study of the precipitating effect of arsine and stibine on common inorganic salts in certain solvents, namely, water, ethyl alcohol, ethyl ether, acetone, carbon disulphide, carbon tetrachloride, chloroform, and benzene has been made, with an attempt at reactivity classification"--Introduction, page 1.

A Study Of Anode Corrosion And Its Influence On Cathode Purity In Electrolytic Zinc Production, Harold John Roesser

Masters Theses

"Anode corrosion is a problem with which electrolytic zinc producers have been concerned from the beginning of the practice. It has been attacked here from the view of modern practice, using alloyed anodes"--Introduction, page 1.

Flotation Of A Western Complex Ore, Guy Verdier Martin

Masters Theses

"The flotation of the complex sulphide ore, which is the subject of this investigation, has been in progress on a large scale for several years. As the operation has been successful it follows that the ore dressing methods have been developed in much detail. For further improvements an intense investigation is required. The complex nature of the ore opens many avenues of research along some of which clues may be found that will lead to ultimate savings. It is along a few of these avenues that this investigation has been directed. Hence an effort was made to add to the …

Comparison Of Results Obtained On Ores From The Tri-State Zinc-Lead District After Grinding To Different Sizes And Concentrating By Flotation, Hans Maucher

Masters Theses

"The purpose of this investigation is to compare the phenomena observed in concentrating a zinc ore by flotation, using a constant and new flowsheet as described a few pages later and varying only the sizes to which the headsamples are ground previous to each test"--Summary, page 1.

Wind And Earthquake Stresses In Tall Buildings, Henry A. Reynolds

University of the Pacific Theses and Dissertations

With the increasing cost of land in the modern city it has been necessary to expand upward rather than on the surface. The result has been to concentrate commercial and industrial enterprises in small areas whose influence is felt over the entire world. Notable examples are New York and Chicago. In these developments the engineer has played no small part. It is claimed by some that the maximum economic height has been reached at a thousand feet. However, both the Chrysler and Empire State Buildings have slightly passed this mark. It is not improbable that even taller buildings then these …

Electrodeposition Of Rubber Upon An Electrode By Means Of A Direct Current Of Electricity, L. F. Novotny

Bachelors’ Theses

The rubber industry may be said to be one of the most speedily developed industries in the world. This is due to a great extent to the fact that the first real interest in rubber as a material of commerce came in the advent of the automobile. It was in 1888 that an Irish horse doctor, John Boyd Dunlop, conceived the idea of tying a rubber tube around the wheels of his little son's velocipede. Within seven years of this event, a $25,000,000 corporation was manufacturing Dunlop tires.

Something may also be said here of the man who took the …

The Electrical Resistance Of Metals And Alloys In Their Hard And Soft States, Noah David Gerchesvky, Charles Becker Hoskins

Bachelors Theses and Reports, 1928 - 1970

It is known that the electrical resistance of annealed metals is usually smaller than that of metals in their cold worked state. The curve showing the relation between electrical resistance and annealing temperature reaches a minimum; continued annealing at higher temperature produces an increase in the electrical resistance. In the case of alloys it has been noted that a second decrease occurs at higher annealing temperature.

The following work corroborates the observance of previous investigations. The electrical resistance of cold worked copper, gold, nickel, and iron decreased with annealing and then increased, the minimum being around 300° C. or 400° …

Comparison Of Moe's Scale Of Hardness With The Rockwell, Brinell, And Scaleroscope Scales., Herbert William Hard

Bachelors Theses and Reports, 1928 - 1970

Moe's scale of hardness as used in mineralogy is admittedly rather indefinite, and no exact hardnesses are measured. The Rockwell, Brinell, and Scaleroscope machines give quite definite results which may be easily reproduced at any time.

The purpose of this investigation is to determine whether any definite relation exists between Moe's hardness and the hardness as measured by those machines commonly used for the determination of hardness of metals. If such a relation were found it would provide a more definite and accurate measure of the hardness of minerals.

Constitution And Specific Gravity Of The Ternary Mattes Cu2S-Sb2S3-Pbs, Herbert William Hard

Bachelors Theses and Reports, 1928 - 1970

The constitution of the ternary mattes Cu₂S PbS Sb₂S₃ has never been completely investigated nor has there been any attempt to draw the complete ternary diagram. The following work is intended to [be] a contribution towards completion of this diagram by determining the specific gravity of different mattes and by pointing out some which show peculiarities of structure.

Pipes In Steel Ingots As Exemplified By Casting Wax, Herbert William Hard

Bachelors Theses and Reports, 1928 - 1970

This paper presents some experimental data on the size and position of pipes steel ingots as exemp1ified by casting wax under various conditions and noting the size and location of the pipes formed.

The results tend to show that the length of the pipe is decreased by:

1. Slow casting

2. By casting large end up instead of down

3. By retarding the cooling of the top

The Effect Of Cobalt Upon Current Efficiency In The Electrolysis Of Zinc Sulphate Solutions, Joseph Newton, Louis Sanders Nuckols

Bachelors Theses and Reports, 1928 - 1970

The detrimental effect of the presence of cobalt upon the current efficiency, in the commercial production of zinc by electrolysis, has been recognized for some time. Most authorities differ upon the maximum amount of cobalt allowable. This is due to the fact that the presence of other impurities either increases or diminishes the detrimental effects of the cobalt.

The following tests were made with the object in view of ascertaining the relation, if any, between the amount of cobalt present and the current efficiency during the electrolysis of an otherwise pure zinc sulfate solution.

The results obtained from these observations …

Economic And Engineering Study For The Rehabilitation Of An Obsolete Factory Area, William E. O'Brien

Bachelors’ Theses

The first example of City Planning in America was the laying out of the National Capital by the French Engineer L’Enfant. The next attempt at grouping of buildings extends .back at least to the World's Fair in Chicago. Following this, contributions to¬ ward better and broader planning were made by an organized group of architects, engineers, and landscape architects. This was followed by studies of better housing facilities, the forming of the Outdoor Art Association and the American League for Civic Improvements, both of which were later merged into the American Civic Association.

The Lead And Zinc Deposits In The Sedimentary Rocks Of East Tennessee And Southwest Virginia, Joseph Hugh Reid

Professional Degree Theses

"In its geographic and geologic relations this area forms a part of the Appalachian province, which extends from the Atlantic Coastal plain on the East to the Mississippi lowlands on the West and from Central Alabama to Southern New York. All parts of the region thus defined have a common history recorded in its rocks, its geologic structure and its topographic features"--Geography, page 1.

Producer Gas Practice In The Steel Industry, Horace Wilfred Hodges

Professional Degree Theses

"The sources of energy for the industries are: 1. Water power; 2. coal, lignite, peat and Wood; 3. Natural and Artificial Gas; 4. Oil; 5. The Sun;s Rays; 6. The tides. The latter two sources may be eliminated from immediate practical use, owing to their cost and limited application. Therefore, the burden for many years will rest upon Water power, coal, gas and oil. We may also eliminate water power from the source of energy of the steel industry, due to the Mill's geographical location. Hence, for the near future, the steel industry's soul rests upon the production of coal, …

An Engineer's Report Of A Lead And Zinc Mining Property, Ernest Moran

Professional Degree Theses

"Gentlemen: Pursuant to your request, I have analyzed and classified the data relative to the Van Buren Mine of the Lucky Syndicate Mining and Smelting Company and beg to submit the following report. The lease is a lead and zinc mining property consisting of eighty (80) acres more or less..."--Letter to the Wright Mining & Royalty Co Miami, Oklahoma, dated December 9, 1929.

Data For Standard Curve Chord Steel Roof Trusses., William Hewitt Bush

Professional Degree Theses

"In the past the Engineering Department of the structural steel company, by which the writer is employed, has been troubled with having to make a large number of preliminary steel truss designs for the purpose of estimating weights for competitive bids on structural steel building contracts. In order to eliminate this expenditure of time, a study was made of the possibility of making a standard design for curved chord steel roof trusses that would give the desired information by observation"--Truss Design, page 5.

Longface And Longwall Mining Methods Being Tried In Oklahoma Coal Fields, Earl Hollinger Mcalpine

Professional Degree Theses

"Of a number of long wall and long face mining methods in use in Oklahoma mines at this time, I shall outline four in this paper. Two of these methods are in use in mines which are comparatively level. The first of these is in the Kali-Inla mine near Hartshorne. The second is in the Milby-Dow Coal Company mine at Dow. The Mullen Coal Company mine near McAlester and the Hailey-Ola Company mine near Lutie are steep pitching mines"--page 1.

Geology Of Mohave County, Arizona, Earl Ross Householder

Professional Degree Theses

"Diamond Creek canyon is located in the eastern part of Mohave County and opens into the Colorado River. Limestones and sandstones of Carboniferous age are abundently [sic] exposed therein"--page 6.

The West Side Sewage Treatment Works Of The Sanitary District Of Chicago, John Edwin Mccauley

Professional Degree Theses

"Herein following is a thesis on the West Side Sewage Treatment Works of the Sanitary District of Chicago. I have endeavored to cover a large field in one thesis, but think is giving the material I have, the fundamental points have been covered. The local need of sewage treatment is so involved with county, state, Federal, and even International issues that to write solely of local conditions would be to leave out the main part of the story. So, in writing, I have tried to dover enough of the subject to give the historical facts along with the construction side …

Some Compressed Air Tests At High Altitude, Thomas C. Robson

Professional Degree Theses

"These tests were made at one of the mines of the "Compania Minera de Potosi", situated in the Cerro Rico (Rich Hill) of Potosi, BOLIVIA, South America; to be used in a report of the General Mine Superintendent, to the mine owners, to show them, that to obtain better results in the compressed air plant, it was necessary to change the existing old compressors working underground"--Preface, page ii.