Engineering Commons^™

A Study Of Eutectics Of Certain Fused Salts, William D. Trethewey

Bachelors Theses and Reports, 1928 - 1970

Considerable work has been done investigating the freezing point curves of fused salts, but little has been written describing the appearance of their eutectic structures when observed under the microscope.

Engineering In Traffic Safety In Utah, Donald T. Hunter

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Traffic safety involves accident-free movement of physical entities. It includes all means of transportation and is a function of mobility, an important variable affecting directly the mortality rate and increase of accidents. All transportation groups have coincidentally with or without increase of mobility been attempting to reduce accidents. Those notably succeeding are the shipping, railroad, and airline interests. The operating motor vehicle and pedestrian groups have failed conspicuously.

The early means of attaining a better degree of traffic safety in the motor vehicle and pedestrian groups were based on opinions, and though rational, were incomplete because of the dynamic and …

Report On Pole Canyon Area And Area Three Miles Southeast Of Jefferson Island, Ted Newcombe

Bachelors Theses and Reports, 1928 - 1970

The primary purpose of the trip was to acquaint the students with some of the problems that occur in the field, and also how to make geologic maps of sections, outcrops, faults, and other geologic features of the earths surface.

The Geology Of The Limespur-Sappington Area, Frank W. Archibald

Bachelors Theses and Reports, 1928 - 1970

The area to be surveyed was divided up into sections add each crew of three or four members was assigned one of these sections. The first two days were spent in studying and mapping the geologic section in the South Boulder Canyon where we obtained practice in alidade surveying, brunton, pacing, and auto traverse.

A Preliminary Report On The Placer Gold Deposits Of The Rio Acandi Seco, Choco, Republic Of Colombia, South America And A Possible Method Of Their Exploitation., Emmett Lee Arnold

Professional Degree Theses

"This property covers the valley of the Rio Acandi Seco, in the district of Acandi, Intendencia (Territory) of Choco, Republic of Columbia, South America.

It consists of four claims, or pertenencias, each straddling and paralleling the course of the Acandi Seco River. Each claim is two kilometers in width, one kilometer on each side of the stream bed, and five kilometers in length, making an area two kilometers (1 1/4 miles) in width by 20 kilometers (12 1/2 miles) in length, containing about 10,000 acres, the conversion being only approximate. These four claims are shown on the attached map as …

Essentials Of Rock Drill Design, Lister Merriken Cummings

Professional Degree Theses

"The earliest history of the rock drill is obscure and only fragmentary evidence concerning it is recorded in the Patent Office. However, no other tool has played a more important part in mining and excavating work. There have been two general classes of pneumatic rock drills -- the reciprocating, or piston machine, and the hammer drill. Fowler played an important part in the early development of piston machines, and the first hammer drill was made in about 1895 by a man named Brothers"--History, page 1.

The Application Of Fluid Level Measurements To Oil Wells In Kansas, Charles Calvert Rodd

Professional Degree Theses

"The mechanics of determining fluid levels and a knowledge of the depth-to-fluid in a well are matters of general interest. To the oil-producer, however, such information is of value only as it may affect the operation of a well or reservoir"--Uses of Fluid-Level Measurements, page 9.

X-Ray Data Concerning Some Manganese-Copper Alloys, George Lester Mitsch

Bachelors Theses

"Until recently the only commercial method of producing metallic manganese in large ammounts sic was a pyrometallurgical process. Producing a metal of about 97% purity, it was not very satisfactory. With the advent of a process for producing a metal of 99.9 plus % purity electrolytically, introduced by the United States Bureau of Mines, for the first time was there a sufficient quantity of pure manganese available for alloy use. The manganese-copper system was chosen for study because of the inconsistencies in the reports of previous investigators, and because of the properties alloys of these components possess, such as magnetism, …

The Clark National Forest Of Missouri, Walter A. Werner

Professional Degree Theses

"The question might logically arise as to the appropriateness of a thesis with a forestry title being submitted for an engineering degree. The writer has been connected with the United States Forest Service for the past four years in an advisory capacity on staff of the Forest Supervisor of the Clark National Forest, during which time he has found that the engineers and construction men have performed a major function in the development of the forest.

As the initial development consisting of lineal surveys, construction of roads and telephone lines, erection of fire lookout towers, planning and erection of ranger …

A Study Of Opacity Produced By Insoluble Refractory Opacifiers, Theodore J. Planje

Bachelors Theses

"To investigate opacification produced by insoluble, refractory opacifiers in an effort to obtain some knowledge and reliable data concerning the electrical charge on the particles - its quality and quantity, and the effect of heavy metallic ions upon the flocculation and deflocculation of the opacifying particles"--Object, page 1.

Firing Behavior Tests And Other Tests On A Missouri Stoneware Clay To Determine Its Commercial Possibilities, Ivan Martin Niedling

Bachelors Theses

"A clay's essential character is its plasticity, whether it is to be used for common brick purposes, the manufacture of refractory articles, or merely as a bonding agent for nonplastic materials. Plasticity is a very large subject; there are many theories as to its cause and many methods have been developed to record it, but so far no satisfactory quantitative measure of plasticity has been found. Perhaps the most satisfactory method is to judge by handling the clay, and with constant practice one can become expert in judging the plasticity of a clay by its feel. Such a method is, …

Red Glazes, Sidney Austin Peer

Bachelors Theses

"Red glazes are extremely difficult to produce on pottery except at relatively low temperatures, or under conditions which can only be regarded as largely accidental. For many years ceramists have demanded a red glaze maturing at cone 4. To produce this glaze, much time and research is required...The object of this study was to produce a commercial red glaze at cone 4 from different oxides in a base glaze of white lead and silica"--Scope of Investigation, pages 1, 7.

The Bloating Of Clays, Everett Walter Sharp

Bachelors Theses

"The effect of firing on clays in relation to volume is either a shrinkage, bloating, or no change whatso-ever. The reason for the shrinkage and the constant volume is well known, but the cause of the bloating has not as yet been determined. In some instances, as the use of fire clay brick in steel ladles, this property of bloating is desirable to a certain extent because this packs the brick lining in the ladle tightly after the first heat is poured in, and prevents the brick lining from floating out when the metal is poured. There is little or …

The Effect Of Clays On The Properties Of Masonry Cement, William Joseph Smothers

Bachelors Theses

"Portland cement is not a material of great antiquity. It was discovered only a little over a century ago and quite by accident. It has been the custom in the manufacture of hydraulic limes to heat argillaceous limestones to temperatures not greatly above that at which the carbon dioxide would be liberated, but this process was carried out in a stack furnace under conditions such that some parts of the material were heated to temperatures which produced sintering. These hard lumps of sintered material were discarded because they were so much more difficult to grind than the unsintered However, in …

The Production Of High Alumina Refractories Bonded With Lumnite Refractory Cement, Joseph Lewis Hoffman

Bachelors Theses

"Users of refractories are constantly demanding a better product. There is a demand for a satisfactory neutral or basic refractory with a P.C.E. equivalent of cone 35 or better. A refractory with a very high alumina content would seem to solve this problem, however, the main difficulty has been to bond the unplastic alumina. From the literature it was learned that Lumnite cement has been satisfactory in the manufacture of a refractory concrete. Therefore this investigation was carried out to determine the adaptability of bonding corundum with Lumnite"--Introduction, page 1.

The Quantitve Measurement Of Amalgamation, Robert A. Mcguire

Bachelors Theses and Reports, 1928 - 1970

Mercury has been known since ancient times. In fact, one mine, the "Almaden" in Spain, has been worked continuously since Roman times. It has been used during all this time for the recovery of free gold from gold concentrates, and from black sand and galena in concentrates from placer work.

Fauna Of The Three Forks Formation In Montana, Will Mitchel Jr.

Bachelors Theses and Reports, 1928 - 1970

The purpose of this paper is to identify and describe the fauna, correlate it with that of the Upper Devonian of other states, to note the geographic distribution, lithologic variations of outcrops, and to compare measured cross sections.

The Effect Of Addition Agents In Grinding Portland Cement Clinker, Eugene Farrell Hill

Masters Theses

"In the dry grinding of most materials in a ball mill or similar apparatus, a degree of fineness is eventually reached when a noticeable decrease in the efficiency of grinding occurs. The degree of fineness where this phenomenon occurs, as measured by the specific surface of the material being ground, varies greatly with different materials. The accompanying effect in all cases, however, is the formation of a coating upon the balls; this coating in the case of cement adheres tightly to the balls and increases in thickness as grinding progresses after the initial "coating' fineness has been reached. Usually an …

Photoelastic Investigation Of Short Beams, Ross R. Carrolla

Masters Theses

"In this investigation the author used beams made of Bakelite. They were of rectangular cross-section and centrally loaded. These beams were viewed in polarized light and the maximum fiber stresses observed in that manner were compared with those computed from the flexure formula. The purpose was to determine the minimum length-depth ratio for which the latter gave fairly accurate results"--Preface, page 6.

Constitution And Properties Of Manganese-Copper Alloys, James Harrison Jacobs

Masters Theses

"This work was undertaken because of the recently revived interest in the use of manganese as an alloying element. This revival of interest has been mainly due to the development of the process for electro-deposition of manganese by the U. S. Bureau of Mines. Prior to the work of the bureau of Mines there was no commercial source of high purity manganese. Manganese made by the electrolytic process contains less than .03% impurities, while manganese made by other methods contains as high as 3% impurities. The use of high purity manganese as a base for alloys should open up an …

Absorption Of Carbon Dioxide In A Bubble Plate Tower, William Arthur Enderson

Masters Theses

"Gas absorption, one of the chief operations of chemical engineering, has occupied investigators for a long time. Results of many experiments on the general subject of gas absorption has been published. However, relatively few data have appeared in the literature on the use of bubble cap towers for gas absorption although they constitute one of the three major classifications of absorption equipment. Bubble cap towers are used extensively in the petroleum industry. More performance data would increase the versatility of existing equipment"--Introduction, page 1.

The Effect Of Particle Size On The Tinting Strength Of A Pigment., Gaylord Barrick 1917-1948

Electronic Theses and Dissertations

No abstract provided.

The Utilization Of Grapefruit Waste., Howard E. Bumsted 1917-1989

Electronic Theses and Dissertations

No abstract provided.

An X-Ray Study Of Engineering Materials., James Edward Butler 1916-

Electronic Theses and Dissertations

No abstract provided.

Plasticizing Ethylcellulose : Ii. Effect Of Ethylcellulose In Spirit Varnishes., Ira Walter Hutchison 1914-1996

Electronic Theses and Dissertations

No abstract provided.

A Study Of Oleoresinous Film Structure., Frank Rush Mcquilkin

Electronic Theses and Dissertations

No abstract provided.

Hydrology Study For The Buffalo Bayou, Texas Flood Control Project., Wilbur E. Kelley 1908-1989

Electronic Theses and Dissertations

No abstract provided.

The Effect Of Annealing On Neumann Bands., Alex B. Davidson

Electronic Theses and Dissertations

No abstract provided.

Pigmentation Of Ethylcellulose Varnishes., Alvin Walter Graef 1914-2006

Electronic Theses and Dissertations

No abstract provided.

A Study Of The Cohesive And Adhesive Properties Of Asphalt., Harold Rose 1918-1997

Electronic Theses and Dissertations

No abstract provided.