Engineering Commons^™

An Investigation Of The Weavability Of Wire With Observations On The Defects Of Wire And Wire Cloth, Walston Chubb

Masters Theses

"In the course of this year's work under the auspices of the Ludlow-Saylor research fellowship many problems of interest to the wire weaving industry have been investigated. Some of these problems have no academic novelty; others were not completed and have been laid aside for future investigations. The major problem for investigation this year was to discover a method by which the weavability of wire might be evaluated. A second problem for investigation was to discover the causes of some of the defects of wire and wire cloth. In addition to presenting the results of these investigations, this thesis represents …

The Barite Industry In The United States, James Byron Chaney

Masters Theses

"Within the past few years, barite has become one of the most important non-metallic substance mined in the United States, as expressed by the large increase in production since 1943. The purpose of this treatise is to combine in a single volume important information concerning the geographical distribution, geology, mining methods, milling or beneficiation methods, production and utilization of barite in the United States. A large number of references has been used in preparing this treatment. The information has, as far as possible, been brought up-to-date. It is thought by the writer that the paper will present to the reader …

Further Studies - Heat Transfer Coefficients For Liquids In Forced Convection Normal To Banks Of Staggered Tubes, Terrell C. Claunch

Masters Theses

"The problem for these experiments may be divided into two sections. The first section of the problem consists of setting up procedure for duplicating data. The second section is that of studying and explaining characteristics of the resulting curves. Correlation of the data obtained will be necessary in order to obtain the curves. In order that the first section of the problem could be solved it was necessary to establish a standard of cleanliness for the apparatus used. Establishment of procedures for the operations and cleaning of the apparatus was necessary. Before Kenneth E. Rudert began his design and construction …

Effect Of Transition Elements On The Transmittance Of B₂O₃ Glasses, Chandubhai Gordhanbhai Amin

Masters Theses

"For many years, boric oxide has been used extensively as a minor constituents in silicate glasses, because of its beneficial influence on their physical properties as well as on glass melting processes; but when used without silica or in too large proportion, the resulting glasses lack chemical durability...Because of its detrimental effect as a major constituent in silicate glasses or in borate glasses, very little work has been done on borate glasses, especially on colored borate glasses...The purpose of this investigation is to find out the effect of the transition elements on the transmission curves of the colored borate glasses"--Introduction, …

Preparation Of Copper Single Crystals By Means Of Powder Metallurgy Methods, Wei-Kung Chang

Masters Theses

"Since different mechanical properties of metals result from different grain size became known, the metallurgists have been interested in finding out the true nature of the grain boundaries. Consequently, several different theories concerning the mechanism of recrystallization, grain growth, and the structure of metals were advanced and studied. These threw much light on the difference of properties between polycrystalline metals and single crystals of the same metals. The single crystals of metals were studied because they enabled the investigator to determine the important points of metallic behavior. The first work on single crystals was rather obscure and limited to isolated, …

A Correlation Of Formulas For The Flow Of Fluids In Pipes, John Gorman Duba

Masters Theses

"At present there exist two quite distinct fields in fluid flow in pipes, the one in water supply and the other in the petroleum industry. It is the purpose of this paper to discuss the various pipeline flow formulas as used in both fields and to correlate the exponential type formula which is much used in practice with the Nikuradse curves obtained in the laboratory"--A Brief Historical Review, page 5.

Evaluation Of Quenching Media Using The End-Quench Hardenability Test, Subodh C. Das Gupta

Masters Theses

"The purpose of the thesis was to evaluate the quenching speed of different quenching media by studying their behaviour in relation to hardenabilities of steels, using the standard A.S.T.M. End-quench Test. At the outset an understanding of the term "Hardenability", so extensively used in industrial heat-treatment, is necessary, The property of a steel, of hardening on quenching to various depths beneath the surface is referred to as the 'Hardenability". It may simply be called the "susceptibility to hardening". Hardenability should be distinguished from the "Hardening capacity", which represents the magnitude of the hardness achieved. The chief factors which affect the …

The Theory Of Limit Design As Applied To The Design Of A Continuous Beam Over Three Supports, Robert F. Davidson

Masters Theses

"The theory of Limit Design is the application of the theory of Plasticity to the estimation of the actual carrying capacity of a structure. In this theory, as it is applied to statistically indeterminate structures, the areas of most unfavorable stress are allowed to be stressed beyond the yield point and into the plastic range of stress. It was formerly held that, by assuming elastic behavior, all questions of strength of materials that concern the Structural Engineer were capable of solution. However, it is now becoming recognized, from actual measurements of deformations of structures and from tests carried to near …

An Investigation Of The Production Of Multicarbide Of Tungsten And Titanium From Wo₃ - Tih₂ - C Mixtures, Chi-Mei Hsiao

Masters Theses

"The purpose of this research was to investigate the possibility of producing the multicarbides of tungsten and titanium from a tungsten oxide-titanium hydride-carbon mixture. It appears to be worthwhile to carry out the reduction, carburization, and pre-alloying in one process, i.e. reducing tungsten oxide with the dissociated hydrogen from titanium hydride and the added carbon; then carburizing the reduced tungsten metal and dissociated titanium metal; at last, pre-alloying the mixture of TiC and WC. The replacement of titanium hydride with titanium oxide seems to be more direct, simple, and economical process; but the difficulty in the reduction of titanium oxide …

Reduction Of Zinc Sulphide In A Vacuum, Tien-Shih Liu

Masters Theses

"The successful large scale commercial application of high vacuum for high temperature metallurgical operations is a comparatively new development. The use of Pidgeon and the carbothermic processes for the production of magnesium during the war forced a perfection of both equipments and techniques for high vacuum operations. This opens broadly the way for a great expansion of vacuum metallurgy. Vacuum operation is thus no more a laboratory method - it is a kind of industrial practice. Many metallurgical operations, which cannot be carried out by ordinary processes, are made feasible when conducted in a reduced pressure. typical examples are the …

Design Of A Barge-Platform Marine Drilling Rig, Ely Schwartz

Masters Theses

"ln the quest for oil in the Gulf of Mexico, princi­pally off the coasts of Texas and Louisiana, unique types of drilling rigs able to cope with environmental conditions have been developed in the last several years. This development is highly specialized and has led to methods of operation revolutionary to the oil industry and is without precedent….

In designing a drilling platform there are three cardinal aims (1) low cost installation and operation, (2) ease of operation, (3) providing safe working condi­tions.

The initial problem is to extend the shore-based fabrication and reduce the offshore construction, foul weather delays, …

A Study Rigid-Frame Design Versus Truss-And-Column Design, Stephen H. Goodman

University of the Pacific Theses and Dissertations

This paper describes the investigation of a mill building bent of truss and column design, a redesign using a rigid-frame, and an estimated cost of each design. For sake of brevity the overall design of the building (sway bracing, lateral bracing, purlins, girts, roofing, siding, and bay spacing) was assumed to be the same for both designs. It is possible that this assumption cannot be made and the estimates of cost, therefore, are in error. In actual practice the complete redesign of the building should be considered.

Terpinol Hydrate And Terpineol From Sulfate Turpentine., Paul Arthur Mckim

LSU Historical Dissertations and Theses

No abstract provided.

Plywood Adhesive Development., Edward J. Dowd

Electronic Theses and Dissertations

This thesis is primarily a study of two-step plywood adhesives made with varying amounts of phenol, 1, 3, 5 xylenol, resorcin, and formaldehyde. Each resin was evaluated by using it as the adhesive in making plywood. The plywood was then tested for shear strength and wood failure after a four hour boil.

Procedures are given for making and testing various straight phenolic resins and resins modified with 1, 3, 5 xylenol or resorcin, or comibinations of both of these accelerating resins.

The straight phenolic resins gave boil-proof bonds, but the curing cycle was too long. Those phenolics modified with 1, …

An Economic Comparison Of Short Span Bridges, Glenn B. Armstrong

University of the Pacific Theses and Dissertations

Present day culture is based upon physical goods and the benefits derived from them. stemming from this physical culture is the desire of possession. Since it is impossible for one person to posses everything, the desire is translated into potential possession. That is, the acquisition of a type of goods that can be exchanged for any other goods at the desire of the individual. This potential goods in money. Thus it becomes the chief sin of every person to acquire money. In order to accumulato a supply of money, an individual must no combine the three factors of production, land, …

Experiments In The Explosive Pulverization Of North Dakota Lignite, James Marvin Airgood

Theses and Dissertations

During the past several years the United States Bureau of Mines and the University of North Dakota have conducted extensive investigation aimed toward the up-grading of lignite coal. These investigations include steam drying, carbonation, briquetting, and gasification of North Dakota lignite. Research work by both the Bureau of Mines and the University of North Dakota is continuing and expanding at the present time. During the past year the construction and operation of a lignite research laboratory on the University campus has been authorized by the United States government. The operation of this laboratory by the United States Bureau of Mines …

Geology And Geological Structure Of The Alberta And Saskatchewan Plains, William E. Topley

Bachelors Theses and Reports, 1928 - 1970

Alberta, responsible for ninety per cent of Canada's output, had, by 1947 entered into her fifth year of production decline. Only ten per cent of Canada's oil requirements were secured from home fields. Ninety per cent had to be imported, mainly from the United States. How long could imports be maintained on present levels? During the year, the United States had started rationing; in one sector of its domain. Would this become general? If so, what was the answer for Canada?

8-Inch Gun Housing: Stresses In Side Walls And Rear Plate, Gerald W. Kinzelman

Bachelors’ Theses

Mr. Phileas H. Girouard, Chief Engineer of the Bureau of Ordnance, Washington, D. C., requested the author of this thesis to determine whether the 8-inch gun housing would safely withstand the forces imposed. It is the purpose of the thesis to show the reasoning followed by the author in proving that the housing was acceptable as designed. Mr. Sidney Hersh assisted in the computations.

The solution to this problem was urgently required before a prototype could be built and tested. At a later date, and independently of the author, a prototype of the housing was tested under the direction of …

An Investigation Of Soil-Cement For Use In A Parking Area, William Gus Koulas

Civil Engineering ETDs

The writer has confined his studies to the use of soil-cement for a parking area located at the State Fair Grounds in Albuquerque, New Mexico. This investigation was made with the expectation of using the existing soil with a minimum amount of cement as recommended for field use in the construction of soil-cement into a durable, serviceable and economical paved area.

The Fort Union Formation Of Montana And Adjacent Areas, Charles Christman

Bachelors Theses and Reports, 1928 - 1970

The Fort Union formation is one of the most import­ant and best known geologic formations of the northern Great Plains, and is found lying almost horizontal at the surface over large areas in this region.

Manganese Oxide Deposits Near Butte And Development Since 1942, Emmett M. Gilmore

Bachelors Theses and Reports, 1928 - 1970

The manganese minerals occur in the peripheral zone of the Butte district with quartz in veins, which at depth contain galena and sphalerite closely associated with silver-bearing minerals. The manganese oxides are all oxidation products formed by weathering of primary rhodochrosite or rhodonite.

Concentration Of Manganese Dioxide From Philipsburg, Montana, W. M. Mcauliffe

Bachelors Theses and Reports, 1928 - 1970

Imports of manganese ore probably supply a major proportion of the needs of the United States. Domestic production is reported to be higher than pre-war levels, but does not equal that of the peak production year of 1943. In 1946, the Anaconda Copper Mining Company ac­counted for 90 percent of the total shipments of mangan­ese nodules, and this company is the largest producer of domestic metallurgical ore in the United States.

A Mineral Dressing Study Of The U.S. Grant Ore, John Emmett Murphy

Bachelors Theses and Reports, 1928 - 1970

This investigation concerns the development of a satis­factory method or extracting or concentrating gold and silver from the ores of the U. S. Grant Mine. The choice between applying an extractive process and one by which the valuable mineral constituents are concentrated depends on more than one factor.

Karst Kamp Asbestos Deposits Gallatin County, Montana, Thomas L. Wilson

Bachelors Theses and Reports, 1928 - 1970

Karst Kamp, a southwestern Montana recreation re­sort, is 32 road miles south of Bozeman on the east bank of the Gallatin River in a narrow V-shaped valley flanked on the west by the rugged Madison mountain range and on the east by the equally rough Gallatin range. The asbestos deposit itself lies approximate­ly one-half mile northwest of the ranch on a heavily timbered "Al­pine-like" slope nearly 1200 feet above the floor of the valley.

Geology And Ore Deposits Of The Salt Chuck-Rush And Brown Mine Area Prince Of Wales Island, Alaska, Judson H. Whitman

Bachelors Theses and Reports, 1928 - 1970

The Salt Chuck, Rush and Brown, and adjacent mines and claims form an area of approximately 15 square miles near the head of Kasaan Bay about 10 miles northwest of the village of Kasaan on Prince of Wales Island in southeastern Alaska. It is an area of moderate relief in which the hills rise from the water’s edge to heights of some 500 feet. Most of the area is covered with dense vegetation and muskeg.

A Discussion Of The Geology And An Isopach Map Of The Pennsylvanian System In Wyoming And Adjacent Areas, B. R. Alto

Bachelors Theses and Reports, 1928 - 1970

Pennsylvanian strata in Wyoming and adjacent areas have been the subject of much work and discussion. Most of the work has been due to the economic importance of the system as an oil producer in this region. Oil production from strata of Pennsylvanian age is rather recent history; and therefore, much of the available information is local­ized and incomplete.

Sandstones Of The Lance And Fort Union Formations, Alan G. Conner

Bachelors Theses and Reports, 1928 - 1970

The Fort Union and Lance formations are widespread terrestrial sediments exposed in Montana, North Dakota, South Dakota, Wyoming, and Canada. Their stratigraphic position, especially that of the Lance, has long been in doubt, and has provoked much controversy among geologists.

Flotation Concentration Of A Montana Lead-Zinc-Silver-Ore, Grover W. Gregson

Bachelors Theses and Reports, 1928 - 1970

The Mike Horse mine, in the Huddelston mining district, is fifty-two miles northwest of Helena, Montana. The mine was discovered in 1898 by Joseph Heitmiller. There was only minor production from the date of discovery until 1915; the main drawback being lack of good road.

The Geology And Mineral Deposits Of British Columbia, John A. Downing

Bachelors Theses and Reports, 1928 - 1970

The province of British Columbia, with an area of 359,279 square miles, includes a large part of the Canadian Cordillera that is the western mountains of Canada. It is the leading province of Canada in the production of lead, zinc, and silver, and third among the provinces in the output of gold, copper, and coal.

The Continuous Electrodeposition Of Manganese, Joseph W. Joyce

Bachelors Theses and Reports, 1928 - 1970

The object of this research was to produce a workable electrolytic cell for the continuous deposition of manganese from aqueous sulphate solutions and determine the critical factors in its oper­ation.