Engineering Commons^™

A Determination Of The Economic Feasibility Of Producing Marginal Gas Wells, Horace Tharp Mann

Masters Theses

"The purpose of this investigation is to show that it is economically feasible to produce marginal gas wells in such a manner that all the gas from the edge of the field will be captured by the first row of wells. In this problem the permeability of the sand is to be variable but known, and the effects of this variable permeability on the pressure distribution, and resulting gas production, will be discussed.

In many gas fields the point at which it is generally considered unprofitable to drill new wells is well inside the boundary of the reservoir. This is …

A Fluidization Process For Making Sodium Sulphate From Sodium Chloride., Roger Foster Detman

LSU Historical Dissertations and Theses

No abstract provided.

The Physical And Chemical Properties Of Louisiana Molasses And Their Relation To Its Exhaustibility., Prasanna Chandra Goswami

LSU Historical Dissertations and Theses

No abstract provided.

Vapor-Liquid Equilibrium Of Non-Ideal Solutions., Virgil Orr

LSU Historical Dissertations and Theses

No abstract provided.

A Study Of Relative Ionic Mobility Of Alkali Ions In Dilute Alkali-Boron Trioxide Glasses As Deduced From Space Charge Considerations, Theodore J. Planje

Doctoral Dissertations

"The extensive investigations in the past have conclusively established that the alkali ions are responsible for the electrical conductivity of glass in both the brittle and viscous states; however, with the exception of one investigation in the brittle state, little consideration has been given to determination of the mobility of the alkali ion in such glassy systems. A review of the literature pertaining to the electrical conductivity of glass is presented.

A method, based on the rate of development of the ionic space charge responsible for polarization of conductivity cell employing direct current voltages, is proposed as a means for …

A Study Of The Dissolution Of Titanium In Acids With Emphasis On Hydrofluoric Acid, Ping-Chao Chen

Doctoral Dissertations

"Titanium is practically a new metal. Although it was discovered by W. Gregor in 1791, the pure metal was not prepared until 1910 by M. A. Hunter, and it is only very recently that tremendous interest has been focused on this new metal, as evidenced by the activities of numerous leading laboratories and pilot plants.

The reasons that Ti is gaining increasing attention may be attributed to the natural abundance of Ti ores in reasonable concentration and, what is more important, to its unusual combination of physical and chemical properties. According to F. W. Clark’s classical geochemical data, Ti amounts …

Measurement Of Flotation Rate As A Function Of Particle Size, Thomas Martin Morris

Doctoral Dissertations

“The Problem. The rate of flotation of solid particles determines the percentage recovery of these particles which can be obtained during a given time interval. An examination of operating data from a flotation plant shows that percentage recovery varies with the size of particle.

Many investigators have explored the problem of measuring flotation rate. In most cases the results obtained were expressed qualitatively. The results obtained by one worker were often at variance with results reported by another worker.

This investigation was undertaken with the object of (1) quantitatively measuring the rate of flotation of various sizes of particles and …

Purification Department Of Zinc Leaching Division At Anaconda, Montana, J. L. Brown

Bachelors Theses and Reports, 1928 - 1970

The original smelter, known as the Upper Works smelter, was located on the north side of the Warm Springs Creek, just 2 miles east of the city of Anaconda and 26 miles from the city of Butte. By the year 1894 this smelter had a capacity of 500 tons of ore a day.

Design And Construction Of Earth Dams., Panthragadi Bhyravamurthy

Electronic Theses and Dissertations

This thesis deals with the design and construction of rolled-fill earth dams with the standard methods of practice, taking the Hirakud Dam as the basis. The field operations of the investigation to obtain observational information and to secure samples for the laboratory testing include observation of rain gauge and river gauge readings, taking river water samples, digging test pits, drilling grout holes, opening drifts, digging borrow pits and conducting detailed topographical surveys. Laboratory tests are conducted on the samples and the results are plotted in graphs. Rainfall and run-off statistics are plotted in graphs. Observational information of geology is plotted …

The Separation Of Zirconium And Hafnium By Distillation : Ii. An Engineering Appraisal Of Aluminum Structural Materials., Everard G. Baker

Electronic Theses and Dissertations

A compilation of references dealing with the separation of hafnium and zirconium is presented, together with an evaluation of their possibilities. It is concluded that a distillation procedure holds the greatest promise. The theory of the separation of hafnium and zirconium by distillation of suitable compounds is given and experimental investigations are presented for confirmation.

The Vanadium Plant Of The Anaconda Reduction Works, Tom Liss

Bachelors Theses and Reports, 1928 - 1970

No complete history of mining and smelting will ever be written that does not include a major discussion of the Butte district. The colorful tale of this area plays a major role in the interesting stories of mining. In the fields of mining methods, labor relations end financial manipulations, the Butte area has set a standard.

A Study Of The Thermal Conductivity Of Pumice, Joseph Mack Ralls

Mechanical Engineering ETDs

For the past several years, the use of pumice as a light weight aggregate building material has been increasing. At first, it was used only in the construction of building blocks. Recently, however, monolithic pumice concrete homes has been constructed in several New Mexico housing projects. One of the larger of these has been completed at Sandia Base in Albuquerque while still another is contemplated for Los Alamos, New Mexico.

The Design And Construction Of An Air Conditioning Unit For Instructional Use, George Joseph Hildebrandt

Mechanical Engineering ETDs

The purpose of this paper is to present an air conditioning unit which was designed and constructed for instructional purposes. The unit, which has two parallel cooling coils so that both the methods of vapor and cold water refrigeration can be demonstrated either individually or simultaneously, consists of filters, cooling coils, humidifier or spray chamber, reheat coil, and fan.

A Thermometer Technique For The Determination Of Emissivities Of Finishes., N. P. Shah 1923-

Electronic Theses and Dissertations

Two thermometer techniques for the determination of emissivities of surface coatings are presented. One procedure involving the attainment of steady state hear transfer relations in coated thermometers placed through the wall of a duct at right angles to the direction of air flow was found to give consistent results. Another procedure based upon the rate of change of thermometer temperature was found to give consistent results only with excellent control of air conditions. The emissivities of a variety of paints, varnishes and lacquers were determined for temperature range 90⁰ F. to 140⁰ F. using silver and black coatings for standardization. …

Pulse Ratings And Thermal Characteristics Of Power Transistors, Christopher Jako

Electrical and Computer Engineering ETDs

Power transistors are used in switching circuits of various types. Their operation in these circuits can be considered as an essentially on-off operation. Designers working with these circuits found that the ratio of the on-time to the off-time is a critical factor in determining the average power that the transistor can dissipate without exceeding its inherent temperature limits.

Waterfront Construction In New York Harbor, Carman William Garrison

Theses

The following chapters are devoted to the various phases of that branch of construction which is followed from the offshore side of the waterfront. This branch, in the parlance of the building trades, is known as dockbuilding. Years ago all waterfront structures in New York Harbor were constructed almost entirely of timber and experience taught that the most economical approach for building docks and wharves was made by utilizing floating piledrivers and derricks. Thus it happened that dockbuilders became skilled both in the use of wood framing tools and in handling marine equipment. Modern dockbuilders must have, in addition to …

The Christensen Sillimanite Deposit Southeast Of Dillon, Montana, Everett O. Bracken

Bachelors Theses and Reports, 1928 - 1970

The minerals sillimanite, kyanite, andalusite, dumortierite, and topaz comprise a group of minerals whose high alumina content and physical properties are particularly desirable in the manufacture of refractory products. Sillimanite is the least plentiful of the minerals of this group, and for this reason it is not used extensively at the present time. However, it would be very desirable to the refractory industry if a suitable domestic source of supply could be established.

A Study Of The Differential Seperation Of Galena And Sphalerite, Wilfred E. Nagel

Bachelors Theses and Reports, 1928 - 1970

The smelting of complex lead ores is a difficult operation, especially when they contain considerable amounts of iron and zinc. When these ores are smelted, all of the zinc, which is valuable and well worth recovering, goes into the slag. With the advent of the flotation processes, and the ability of these processes to concentrate the lead and zinc minerals into separate products, the smelting of complex lead ores was to a great extent simplified.

Newspaper Matrix Backing Techniques., Robert Roscoe Childs

Electronic Theses and Dissertations

The problem of developing suitable materials and techniques for the elimination of hand backing of mats was undertaken. A thermosetting resin of the resorcinol type, ad-mixed with 15 to 25 per cent short-fiber asbestos, was applied to the mats both as a paste and in the form of a partially cured resin sheet. Its use was discontinued since its inherent insulating properties and warpage were found to be undesirable.

After experimenting with several other backing materials and methods, the following procedure was concluded to be feasible:

(1) Spraying sodium silicate solution upon a sheet of blotting paper.

(2) Pressing the …

Semi-Micro Combustion, Solvent Extraction, And Oleic Acid Adsorption Of Synthetic Drying Oils : Part Ii., Isadore Nathan Cooperman

Electronic Theses and Dissertations

The rates of oxidation, solvent solubility, and oleic acid adsorption, of natural and synthetic drying oil films were studied by semi-micro analytical methods.

This thesis consists of three phases:

I. Ultimate analysis to determine the oxygen content of a film at specific time intervals.

II. Extraction of the films to determine their solvent solubility as a function of time.

III. Oleic acid adsorption to get a correlation of the structure of the film.

Seven materials were examined:

A. Glyceryl Trilinoleate

B. Pentaerythritol Tetralinoleate

C. Pentaerythritol Oleate

D. Pentaerythritol Oleic Acid Long Oil Alkyd

E. Dipentaerythritol Linoleate

F. Pentaerythritol Linoleate

Glyceryl …

A Study Of Diffusion In Distillation., Joseph G. Duffey

Electronic Theses and Dissertations

A study of the mass transfer phenomena in fractional distillation was made. Small scale single slot, single cap apparatus was used to obtain the necessary experimental data.

The mass transfer coefficient KgA was calculated using several combinations of liquid and vapor compositions in the menthanol - water system under static liquid conditions. The correlation showed that KgA held about constant over the entire range of concentrations.

The problem of bubble area was studied and reasonable estimations of area, bubble frequency, and time of rise were made. This information is to be incorporated into the calculation of the mass transfer coefficient …

A Study Of The Effect Of Pigmentation On The Film Properties Of Ethocel : Part Ii. A Study Of The Effect Of Sun Light On The Color Of Pigments., Mansur Ahmad

Electronic Theses and Dissertations

The purpose of this investigation was to determine quantitatively the effect of pigmentation on the film properties of ethocel lacquer. This study was confined to the determination of tensile strength, percentage elongation at failure, softening and melting points of the films. Pigments were ground in the ethocel lacquer containing three parts ethocel, one part 276V-9 Dow resin and sixteen parts solvent by weight. Softening and melting points of the films were determined and were found to increase uniformly with increasing amounts of the pigments. The tensile strength of ethocel film with titanium dioxide as a pigment increased from 317 Kgm/Cm2 …

Relative Volatility Of Esters In Ethyl Alcohol-Water-Ester System., Yi-Chung Chang

Electronic Theses and Dissertations

The relative volatillities of five branch-chained esters with respect to ethyl alcohol in mixtures of ethyl alcohol and water containing small amounts of esters were determined experimentally. The results could be used in the design of distillation columns for ethyl alcohol purification.

For alcohol concentrations of more than 50 mol per cent, the increase of relative volatility of the esters was inversely proportional to the alcohol concentration. For dilute concentrations of less than 30 mol per cent the increase in volatility was very rapid, and the rates of increase were different for different esters. No simple quantitative correlation was established …

I. Improved Ice Meltage In Ice Boxes; Ii. Temperature Control In Tents - Winter Phase., Robert Beaman Duggan

Electronic Theses and Dissertations

This thesis consists of two parts: Improved Ice Meltage in Ice Boxes; Temperature Control in Tents - Winter Phase. Improved ice meltage in the Progress refrigerator is discussed in the first part of the thesis. This portion of the work shows that satisfactory refrigerator temperatures and flat ice meltage could not be obtained simultaneously when using V-shaped ice racks, although they could be obtained separately; however, the basket-type chamber offers greater possibilities of obtaining proper temperatures and meltage characteristics. Series of tests are discussed and conclusions drawn from the results. In the second part of the thesis, a method of …

A Mineral Dressing And Economic Study Of A Complex Arsenical Ore, Luigi D. Piana

Bachelors Theses and Reports, 1928 - 1970

The factors that influence the choice of a method for treat­ment of an ore comprise the technical and economic limitations and advantages, derived in detail and balanced according to the exigencies of the particular situation.

Separation Of Cadmium From Zinc In The Purification Step Of The Leaching Cycle, L. C. Powell

Bachelors Theses and Reports, 1928 - 1970

The purpose of this investigation is to determine the effect of the factors listed previously by conducting a series of tests that will indicate the ex­tent to which the purification is influenced by time, temperature, zinc oust size, zinc dust quantity, iron concentration, two stage precipitation, and aeration.

An Investigation Of The Precipitation Of Cobalt With Zinc Dust, Lyle Hallberg

Bachelors Theses and Reports, 1928 - 1970

Cobalt, as well as copper, cadmium, and other impurities, is removed by selective precipitation with zinc during the zinc electrolyte purification cycle, and the purification residue may be treated by a Cadmium Plant for the recovery of cadmium.

Construction And Operation Of A Laboaratory Size Thum Cell, Raymond Dugdale

Bachelors Theses and Reports, 1928 - 1970

Electrolytic silver refining was not perfected until the end of the nineteenth century. During the process of development, two systems of silver refining have come into prominence: the Moebius and the Thum types.

An Investigation Of Silicon Impregnation Of Low-Carbon Steels, Thomas E. Groce

Bachelors Theses and Reports, 1928 - 1970

A problem of metallurgy during the last part of the Nineteenth and the early Twentieth Century, and one that stood very near the front, was investigations of methods to produce a non-corrosive surface on iron and steel without affecting the physical properties of these base metals.

A Study Of The Transformation Of A Twenty-Eight Per Cent Tin Bronze, Perry A. Boukind

Bachelors Theses and Reports, 1928 - 1970

In this investigation, attention is directed to the phases covered by a 28 per cent tin alloy. When the investigation was started, consideration was given to the possibility of making a Time - Temperature - Transformation curve for this parti­cular alloy. As the work progressed and further research was carried on, this phase of the work was abandoned.